Installation Guide

ManualsBrandsDelta ManualsEscutcheons & Shut-Off Valve FlangesR4707

R4707 DECK MOUNT ROMAN TUB

WITH HAND HELD SHOWER DIVERTER

ROUGH-IN KIT

JUEGO DE PIEZAS PARA LA TUBERÍA

INTERNA R4707 PARA LA INSTALACIÓN

EN BORDES DE BAÑERAS ROMANA CON

DESVIADOR MANUAL PARA REGADERAS

DE MANO

KIT DE PLOMBERIE BRUTE R4707 DE

ROBINET DE PLAGE DE BAIN ROMAIN

AVEC DÉRIVATION POUR DOUCHE À MAIN

2/16/15 Rev. B

Write purchased model number here.

Escriba aquí el número del modelo comprado.

Inscrivez le numéro de modèle ici.

You may need / Usted puede necesitar / Articles dont vous pouvez avoir besoin:

Para instalación fácil de su llave

Delta usted necesitará:

•LEER TODAS las instrucciones

completamente antes de empezar.

•LEER TODOS los avisos, cuidados,

e información de mantenimiento.

For easy installation of your Delta

faucet you will need:

•ToREAD ALL the instructions completely

before beginning.

•ToREAD ALL warnings, care, and

maintenance information.

Pour installer votre robinet Delta

facilement, vous devez:

•LIRE TOUTES les instructions avant de

débuter.

•LIRE TOUS les avertissements ainsi que

toutes les instructions de nettoyage et

d’entretien.

R4707

Finished Deck

(Standard) Installation

Use these instructions on a finished

deck installation up to

2 1/2" (63.5 mm) thick.

R4707

Instalación (Estándar) para

Bordes Acabados

Use estas instrucciones para la insta-

lación en bordes hasta

2 1/2" (63.5 mm) de grosor.

R4707

Installation standard dans une

plage finie

Suivez ces instructions pour installer

un robinet dans une plage finie épaisse

d’au plus 2 1/2 po (63.5 mm).

R4707

Rough Deck (Thick Tile) Installation

Use these instructions on a rough

deck (thick tile) installation up to

2 1/2" (63.5 mm) thick (excluding

plywood underlayment).

R4707

Instalación de las Tuberías Internas

en los Bordes (Losas Gruesas)

Use estas instrucciones en instalacio-

nes en los bordes (de losas gruesas)

hasta de 2 1/2” (63.5 mm) de grosor

(incluyendo el contrapiso de madera

polywood)

R4707

Installation dans une plage en

carreaux

Suivez ces instructions pour installer

un robinet dans une plage en

carreaux épaisse d’au plus 2 1/2 po

(63.5 mm) (épaisseur du panneau de

sous-finition en contreplaqué exclue).

80162

www.deltafaucet.com

Plumber’sTape

R4707

R4707-MF R4707-PX

Summary of content (16 pages)

PAGE 1
80162 R4707 R4707-MF R4707 DECK MOUNT ROMAN TUB WITH HAND HELD SHOWER DIVERTER ROUGH-IN KIT R4707-PX JUEGO DE PIEZAS PARA LA TUBERÍA INTERNA R4707 PARA LA INSTALACIÓN EN BORDES DE BAÑERAS ROMANA CON DESVIADOR MANUAL PARA REGADERAS DE MANO KIT DE PLOMBERIE BRUTE R4707 DE ROBINET DE PLAGE DE BAIN ROMAIN AVEC DÉRIVATION POUR DOUCHE à MAIN Write purchased model number here. Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici.
PAGE 2
R4707-PX 1/2" Crimp Rings & 6 Feet of FlexPex (Type A) PEX Tubing Finished Deck (Standard) PEX Crimp Installation Use standard PEX installation instructions for finished deck installation up to 2 1/2" thick.
PAGE 3
R4707 Standard Installation Instalación Estándar Installation standard C. A. 1 1 3 5" min. (12.7 cm) 3" min. (7.6 cm) * 2 8"- 16" (20.3-40.6 cm) 1 1- 1/2" (38 mm) 1 3 1- 1/2" (38 mm) 2 18" (45.7 cm) Max. D. B. 6 1 5 3 6 1 1 2 6 5 2 1 7 1 3 1 3 2 4 6 7 2 6 Finished Deck (Standard) Installation C. Loosen screws (1) until cardboard tube (2) is free. Rotate nest (3) 90˚ and remove . Remove cardboard tube and discard. (NOTE: Intended for surfaces up to 2 1/2" (63.5 mm) thick.
PAGE 4
R4707 Instalación Estándar Standard Installation E. Installation standard G. 1 1 1 1 1 1 1 1 F. H. 1 2 3 1 4 5 2 3 1 5 2 E. Tighten screws (1) with a regular slotted screwdriver. NOTE: One screw can be G. Solder connections. fully tightened before the other screw is tightened. H. Insert the leader hose (1) through the spray support assembly (2). F. Make sure end valves are properly aligned (1). Carefully bend corrugated outlet tubes (2) and insert into tee (3).
PAGE 5
Standard Installation R4707 Thick Tile Installation Instalación Estándar R4707 Instalación en lozas gruesas Installation standard Installation sur des carreaux A. I. 5" min. (12.7 cm) 3" min. (7.6 cm) * 8"- 16" (20.3-40.6 cm) 2" (51 mm) 2" (51 mm) 18" (45.7 cm) Max. B. 5 5 1 7 1 2 6 4 6 3 6 I. Turn on water supplies and check for leaks. You are now ready for the trim kit. Please see the trim installation instructions.
PAGE 6
R4707 Thick Tile Installation Instalación en lozas gruesas C. Installation sur des carreaux E. 3 4 3 2 1 2 1 4 1 D. F. C. Carefully bend corrugated outlet tubes (1) and insert into tee (2). Connect tee to spout adapter (3). Connect inlet tubes (4) to water supplies. NOTE 1: For tubes to bend properly after installation, water inlet tubes must be at an angle to the water supplies. Be careful bending the copper tubes. Kinked tubes will void warranty.
PAGE 7
R4707 Thick Tile Installation Instalación en lozas gruesas Installation sur des carreaux I. G. 1 3 2 1 1 2 1 1 1 2 2 1 3 3 2 1 H. J. 2 1 4 2 2 1 1 3 1 5 1 1 4 2 1 2 1 4 1 2 1 1 3 1 1 1 2 3 1 1 G. Finish surface up to cardboard spacers (1). Washers (2) and nest (3) I. Replace washers (1) on end valves and spout adapter. Replace nest (2) on hand spray sup- H. Loosen screws (1) until washers (2) and nest (3) are free. Rotate J.
PAGE 8
R4707-PX R4707-MF PEX Standard Installation Instalación Estándar de PEX A. PEX Installation standard C. 1 1 3 3" min. (7.6 cm) 5" min. (12.7 cm) * 8"- 16" (20.3-40.6 cm) 2 1 1- 1/2" (38 mm) 3 1 1- 1/2" (38 mm) 2 18" (45.7 cm) Max. B. D. 6 1 5 3 6 1 1 2 6 5 2 1 7 1 3 1 3 2 4 6 7 2 6 Finished Deck (Standard) Installation C. Loosen screws (1) until cardboard tube (2) is free. Rotate nest (3) 90˚ and remove . Remove cardboard tube and discard.
PAGE 9
R4707-PX R4707-MF PEX Standard Installation Instalación Estándar de PEX E. F2. PEX Installation standard R4707-MF 3 1 1 1 1 1 4 1 1 1 1 3 2 3 1 4 5 4 4 3 2 4 2 F1. G. R4707-PX 3 2 2 3 4 3 3 3 1 2 2 Note: For PEX, be sure to use proper fitting for crimping and the proper tool for cold expansion. F2. For R4707-MF PEX Cold Expansion: Make sure end valves are properly aligned E. Tighten screws (1) with a regular slotted screwdriver. NOTE: One screw (1).
PAGE 10
R4707-PX R4707-MF H. PEX Standard Installation R4707-PX R4707-MF Instalación Estándar PEX PEX Installation standard PEX Thick Tile Installation Instalación PEX en losas gruesas PEX Installation sur des carreaux A. R4707-PX 5" min. (12.7 cm) 3" min. (7.6 cm) * 8"- 16" (20.3-40.6 cm) 2" (51 mm) 2" (51 mm) 18" (45.7 cm) Max. B. 5 R4707-MF 5 1 7 1 2 6 4 6 3 6 Rough Deck (Thick Tile) Installation (NOTE: Intended for surfaces up to 2 1/2" (63.5 mm) thick excluding plywood underlayment.
PAGE 11
R4707-PX PEX Thick Tile Installation Instalación PEX en losas gruesas PEX Installation sur des carreaux R4707-MF C1. R4707-PX D. 3 2 3 2 4 3 2 3 1 2 2 C2. R4707-MF E. R4707-PX R4707-MF 3 4 1 1 3 2 3 4 5 2 4 3 2 2 Note: For PEX, be sure to use proper fitting for crimping and the proper tool for cold expansion. C1. For R4707-PX PEX Crimp: Measure and cut 1/2” PEX (Flexible type A) tubing (2) to length.
PAGE 12
R4707-PX PEX Thick Tile Installation Instalación PEX en losas gruesas PEX Installation sur des carreaux R4707-MF H. F. 1 3 2 1 1 2 1 1 1 2 2 1 3 3 2 1 G. I. 2 1 4 2 2 1 1 3 1 5 1 1 4 2 1 2 1 4 1 2 1 1 3 1 1 1 2 3 1 1 F. Finish surface up to cardboard spacers (1). Washers (2) and nest (3) H. Replace washers (1) on end valves and spout adapter. Replace nest (2) on hand spray sup- G. Loosen screws (1) until washers (2) and nest (3) are free. Rotate I.
PAGE 13
RP40615 R4707 (Solder) Spout Adapter Assembly Ensamble del Adaptador/Desviador del Tubo de Salida Adaptateur/Dérivation du bec R4707 (Solder / Suelde / Brasage) RP40505 Top Washer Arandela superior Rondelle supérieure RP40510 End Valve Assembly Ensamble de la válvula final Soupape RP40617 Test Cap Tapa de prueba Bouchon d’essai RP40503 Jack Screw Gato de Tornillo Vis d’ajustement RP40668 Diverter Assembly Ensamble del Desviador Dérivation RP40507 Bottom Washer Arandela Inferior Rondelle inférieure RP
PAGE 14
Cleaning and Care Care should be given to the cleaning of this product. Although its finish is extremely durable, it can be damaged by harsh abrasives or polish. To clean, simply wipe gently with a damp cloth and blot dry with a soft towel.
PAGE 15
Notes / Notas / Notes 15 80162 Rev.
PAGE 16
Notes / Notas / Notes 16 80162 Rev.