Operating Guide

ManualsBrandsDelta ManualsPlumbingMultiChoice Universal Tub and Shower Valve Body Rough-in Kit

MULTICHOICE™ PUSH BUTTON

DIVERTER ROUGH-IN BODY

DESVIADOR DE BOTÓN -

PIEZAS PARA LA INSTALACIÓN

INTERNA MULTICHOICE™

PLOMBERIE BRUTE AVEC

DERIVATION À POUSSOIR

MULTICHOICE

Model/Modelo/Modèle

R10300-UNWS

Series/Series/Seria

You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin:

For easy installation of your Delta

faucet, you

will need:

• To READ ALL the instructions completely

before beginning.

• To READ ALL warnings, care and maintenance

information.

NOTICE TO INSTALLER: CAUTION - As the installer

of this rough-in body, it is your responsibility to

properly INSTALL this rough-in body per the

instructions given. YOU MUST inform the owner/

user of this requirement by following the

instructions. If you or the owner/user are unsure how

to properly install this rough-in body, please refer to

the instructions supplied and if still uncertain, call

us at 1-800-387-8277. Leave this Instruction Sheet

for the owner’s/user’s reference.

Para instalación fácil de su llave Delta

usted

necesitará:

• LEER TODAS las instrucciones completamente

antes de empezar.

• LEER TODOS los avisos, cuidados, e información

de mantenimiento.

AVISO AL INSTALADOR: PRECAUCIÓN - Como

instalador de la tubería interna - dentro de la pared/

piso, es su responsabilidad INSTALAR esta pieza

correctamente como se describe en las instruc-

ciones que le damos. USTED DEBE informarle

al propietario/usario, siguiendo las instrucciones

dadas, de este requisito. Si usted o el propietario/

usario no están seguros como se instalan correcta-

mente las tuberías internas, por favor refiérase a las

instrucciones proporcionadas y si todavía no está

seguro, llámenos al 1-800-387-8277. Deje esta

hoja de instrucciones como referencia para el

propietario/usario.

Pour installer votre robinet Delta

facilement,

vous devez :

• LIRE TOUTES les instructions avant de débuter.

• LIRE TOUS les avertissements ainsi que toutes

les instructions de nettoyage et d’entretien.

AVIS À L’INSTALLATEUR : ATTENTION - En

qualité d’installateur, vous est tenu de bien

INSTALLER ce corps de robinet conformément aux

instructions. VOUS DEVEZ informer le propriétaire

ou l’utilisateur de cette exigence. En cas de doute

quant à la marche à suivre pour installer ce corps de

robinet, veullez lire les instructions fournies et, au

besoin, veuillez nous appeler au 1-800-387-8277.

Veuillez laisser ce feuillet d’instructions au

propriétaire ou à l’utilisateur pour qu’il puisse

le consulter s’il y a lieu.

210023 210023 210023 210023 210023

210023 Rev. A

Summary of content (6 pages)

PAGE 1
210023 210023 210023 210023 210023 210023 Model/Modelo/Modèle R10300-UNWS Series/Series/Seria MULTICHOICE™ PUSH BUTTON DIVERTER ROUGH-IN BODY DESVIADOR DE BOTÓN PIEZAS PARA LA INSTALACIÓN INTERNA MULTICHOICE™ PLOMBERIE BRUTE AVEC DERIVATION À POUSSOIR MULTICHOICEMC You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin: 210023 • To READ ALL the instructions completely before beginning. • To READ ALL warnings, care and maintenance information.
PAGE 2
1 B A 3 5 4 1 2 3 1 2 3 A SHUT OFF WATER SUPPLIES. Consider the type and thickness of your finished wall before placing your stringer back plate. Install the body (1) so the surface of the finished wall is flush with the front of the plasterguard (2), using the two stringer mounting holes (3) on the bracket. Note: Remove cover (4) to access mounting holes. Make sure the word “UP” (5) is on top of the valve body when installing.
PAGE 3
2 A Copper Tubing Tubería de Cobre Cuivre B 3 1 2 1 2 Iron Pipe Hierro Fer 2 1 1 4 Connect valve body to water supplies using the proper fittings for your valve body type (copper tubing or iron pipe). Note: (1) is the cold inlet port and (2) is the hot inlet port. If either of the two outlet ports is to be unused, seal the port with a pipe plug. B Remove bonnet (1), test cap (2), cardboard protector sleeve (6), thermoplastic cap (7) and push button assembly (4) before soldering.
PAGE 4
3 4 5 6 1 1 7 4 2 3 10 9 8" - 18" (203 mm-457 mm) 8 po - 18 po 4 2 8 1 6 3 4 3 2 7 6 Connect top outlet (1) to shower pipe with proper fittings. Connect bottom outlet (2) to tub spout pipe with proper fittings. If a copper solder connection is used, re-install the push button assembly (4) once the joint has cooled.
PAGE 5
Replacement Parts Piezas de Repuesto Pièces de rechange RP46079 Reusable Test Plug (sold as RP only) Tapón de Prueba Reutilizable (sólo se vende como pieza de repuesto) Bouchon d’essai réutilisable (pièce de rechange seulement) RP46078 Test Cap Tapa de Prueba Capuchon d’essai RP46077 Screen Filtro de malla Tamis RP50366 Stops Topes Butées RP22734 Bonnet Capuchón Chapeau RP5649 Push Button Diverter Desviador de Botón Deviation à Poussoir RP46076 Cover Cubierta Couvercle OPTIONAL OPCIONAL FACULTATIF R
PAGE 6
Delta Commercial Faucet Limited Warranty All parts of the Delta® HDF® and TECK® faucets are warranted to the original consumer purchaser to be free from defects in material, finish and workmanship for a period of five (5) years unless otherwise specifically stated in the catalogue and price book. This warranty is made to the original consumer purchaser and shall be effective from date of purchase as shown on purchaser’s receipt.