Installation Instructions

ManualsBrandsDelta ManualsFaucet Handles & AccessoriesCassidy™ Handles

TWO HANDLE WIDESPREAD

LAVATORY FAUCETS

LLAVES DE LAVAMANOS

EXTENDIDAS DE DOS MANIJAS

ROBINETS À ENTRAXE LONG À

DEUX POIGNÉES POUR LAVABO

Model/Modelo/Modèle

3595LF-LHP & 3595LF

Series/Series/Seria

Para instalación fácil de su llave Delta

usted necesitará:

• LEER TODAS las instrucciones completamente

antes de empezar.

• LEER TODOS los avisos, cuidados, e

información de mantenimiento.

• Comprar las conexiones correctas para el

suministro de agua.

For easy installation of your Delta

faucet you will need:

• To READ ALL the instructions completely

before beginning.

• To READ ALL warnings, care, and maintenance

information.

• To purchase the correct wat

er supply hook-up.

Write purchased model number here.

Escriba aquí el número del modelo comprado.

Inscrivez le numéro de modèle ici.

You may need/Usted puede necesitar/

Articles dont vous pouvez avoir besoin:

SILICONE

Pour installer votre robinet Delta

facilement, vous devez:

• LIRE TOUTES les instructions avant de débuter;

• LIRE TOUS les avertissements ainsi que toutes

les instructions de nettoyage et d’entretien;

• Acheter le bon nécessaire de raccordement.

3/32” (2.38mm)

ASME A112.18.1 / CSA B125.1

ASME A112.18.2 / CSA B125.2

01/02/13

www.deltafaucet.com

Rev. D

67778

Cassidy

ICC/ANSI A117.1

SILICONE

Summary of content (6 pages)

PAGE 1
TWO HANDLE WIDESPREAD LAVATORY FAUCETS 67778 LLAVES DE LAVAMANOS EXTENDIDAS DE DOS MANIJAS ASME A112.18.1 / CSA B125.1 ASME A112.18.2 / CSA B125.2 ICC/ANSI A117.1 ROBINETS À ENTRAXE LONG À DEUX POIGNÉES POUR LAVABO Model/Modelo/Modèle 3595LF-LHP & 3595LF Series/Series/Seria Cassidy Write purchased model number here. Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici.
PAGE 2
A. 1 C. 9 9 1 10 7 12 11 3 1 4 2 8 5 2 6 3 D. B. 1 3 1 1 3 3 2 1 A. Slide hot (1) and cold (2) end valves with gasket (3) through sink. C. Note: Hot side endvalve is labeled (4). Secure end valves with washers (5) & threaded brackets (6). Hand tighten brackets (6) onto shank (7). Lock brackets into position by tightening screw (8). Install handles (9) on end valves and secure with set screw (12). Be sure glide ring (10) is properly seated in bottom of handles before installing.
PAGE 3
B. C. E. D. 1 ON E 2 A. SI LI C 1 2 3 2 3 1 2 1 1 2 2 G. F. 4 H. 5 4 3 2 1 1 5 2 2 3 6 1 Step 3b Metal Pop-up A. Remove stopper (1) and flange (2). B. Screw nut (1) all the way down. Push washer (2) and gasket (3) down. C. Remove tailpiece (1) from body (2), add plumber tape (3), replace tailpiece. Step 3e D. Apply silicone to underside of flange (1). rod (2) and Stephorizontal 3c G. Remove pivot nut (1). Install E. Pivot (1) must face faucet. Pull assembly H.
PAGE 4
3 3 3 1 2 1/2" (13 mm) IPS 4 1 2 3 4 A FLUSH SYSTEM / CHECK FOR LEAKS. Remove aerator (1) using supplied wrench (2) and turn faucet handles (3) all the way on. Turn on hot and cold water supplies (4) and flush water lines for one minute. Important: This flushes away any debris that could cause damage to internal parts. Check all connections at arrows for leaks. Re-tighten if necessary, but do not overtighten. CONNECT TO WATER SUPPLIES. (HOOK-UPS NOT PROVIDED).
PAGE 5
Specify Finish Especifíque el Acabado Précisez le Fini H297 Handle Assembly (2) Ensamble de la manija (2) Manette (2) RP72716 Lift Rod Barra de alzar Tige de Manoeuvre The faucet code is found on the back of the spout. El código del llave se encuentra en la parte posterior del tubo de salida. Le code du robinet est trouvé sur le dos du bec.
PAGE 6
CLEANING AND CARE Care should be given to the cleaning of this product. Although its finish is extremely durable, it can be damaged by harsh abrasives or polish. To clean, simply wipe gently with a damp cloth and blot dry with a soft towel.