Specification Sheet

Submitted Model No.: _____________________________________________
Specific Features: ________________________________________________
3530-MPU
3530-LHP
1 5/8"
(42 mm)
to
2 3/8"
(61 mm)
2 1/8"
(54 mm)
Dia.
3 3/8"
(86 mm)
1 3/8"
(35 mm)
Dia.
4 5/8"
(118 mm)
1 1/4" (32 mm) Dia.
®
®
U
P
C
COMPLIES WITH:
•
ASME A112.18.1
• CSA B125
Indicates ADA compliance to
ICC/ANSI A117.1
• IAPMO Listed
• CSA Certified
•
ASTM F409 (for non-metallic drain)
LAVATORY
FAUCETS
■ Two Handle
■ Innovations
®
Series
■ Widespread
■ Three Hole Sink Applications
■ 6" to 16" Centers
■ Quick-Snap
®
Installation
STANDARD SPECIFICATIONS:
• Two handle lavatory faucets for concealed
mounting on three hole sinks.
•
Widespread - 6" (152mm) to 16" (406 mm)
centers.
• Quick-Snap
®
installation.
• 1/4 turn stops.
• Solid brass fabricated end valve and
spout bodies.
• 5 1/4" (133 mm) long, 3 7/8" (98 mm) high,
rigid spout.
•
Hot and cold stems are interchangeable.
• Control mechanism shall be of the rotating
cylinder type with stainless steel plate and
180° rotation, with replaceable non-metallic
seats operating in stainless steel lined sockets.
•
3/8" O.D. copper supply tubes.
• Models with suffix “WF” and “LHP” supplied
with 1/2"-14 NPSM adapters.
• Models have metal drain with pop-up type
fitting with plated flange and stopper.
UL Listed to US and Canadian
UL Listed to US and Canadian
Safety Standards and Classified
ety Standards and Classified 

in accordance with
in accordance with
ANSI/NSF 61
ANSI/NSF 61
21PL
0
1
2
3
4
5
0 102030405060708090
Pressure (PSI)
Flow (U.S. Gallons Per Minute)
6
0 69 138 207 276 345 414 483 552 621
0
3.8
7.6
11.4
15.1
18.9
22.7
Pressure (kPa)
Flow (Liters Per Minute)
6" to 16"
Centers
1/2"-14 NPSM
Suffix WF and LHP Models Only
1 1/8" (29 mm)
Max. Deck
Thickness
2 3/8"
(61 mm)
5 1/4"
(134 mm)
Flexible Hose
Connection
2 9/16"
(66 mm)
3/8" O.D.
Copper Tubing
1" (25 mm)
Dia.
7 5/8"
(194 mm)
1 1/8" (29 mm)
Dia.
2 1/4"
(57 mm)
Dia.
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only.
1.D.14