Electronic Kettle Instruction Manual After Sales Support Now you have purchased a Delta® product you can rest assured in the knowledge that as well as your 3 year parts and labour warranty you have the added peace of mind of dedicated helplines and web support.
Contents 3 3 6 6 6 7 8 8 11 13 13 14 16 2 Introduction Safety Scope of delivery Recycling Technical Data Components and accessories Prior to initial use Use Cleaning + descaling Faults and Rectification Conformity Declaration Warranty Warranty card HELPLINE No. U K / N.IRELAND 0800 328 60 20 REP. IRELAND 00 800 44 67 58 88 E-MAIL SUPPORT info@dariolondon.
Introduction You have made an excellent choice with the purchase of this quality Delta® brand product. By doing so you now have the assurance and peace of mind which comes from purchasing a product that has been manufactured to the highest standards of performance and safety, supported by the high quality standards of Aldi.
Hazard for children and a wider group of persons This device is not intended for use by persons (including children) with limited physical, sensory or mental abilities or lacking experience and/or knowledge, unless they are supervised by a person responsible for their safety or have received instructions for use of the device from this person in advance. z Supervise your children in order to ensure that they do not play with the appliance.
Do not carry out any modifications to the appliance or its power cable. Only have repairs carried out by a professional workshop, as devices that have not been properly repaired can be hazardous to the user. Also pay attention to the enclosed guarantee conditions. z Do not use an extension cord. If the power cable of this appliance should be damaged, it must be replaced by the manufacturer, its after-sales service or customer service in order to avoid hazards.
There are feet on the underside of the base. As the furniture/floor surfaces are made of diverse materials and are treated with diverse care products, it cannot be entirely ruled out that some of these materials contain components, which could attack and soften the appliance feet. If necessary, place a non-slip underlay under the base. z Do not clean the kettle with hard, scratching or abrasive detergents, steel wool, or similar.
Components and accessories Operating buttons Sieve (in kettle) Locking button Lid Spout Fill level display Kettle Handle Base Control lamps are integrated into the on/off button and KEEP WARM button. Operating buttons Cable winder (base underside) Temperature-LEDs Button for setting the temperature Keep Warm button On/off button HELPLINE No. U K / N.IRELAND 0800 328 60 20 REP. IRELAND 00 800 44 67 58 88 E-MAIL SUPPORT info@dariolondon.
Prior to initial use Unpacking and setup 1. 2. 3. 4. 5. Remove the kettle from the packaging and carefully remove all packaging material. Check the kettle and base for possible transport damage. Unwind the power cable from the cable winder. This is on the underside of the base. Lead the cable through the cable recess. Place the base on an even and stable surface. This surface should be easy to clean, brightly lit and easily accessible. 6. Place the kettle on the base. 7.
3. Fill the required quantity of fresh, cold water. Pay attention to the fill level display: The water level must be between MIN and MAX. 4. Close the lid again. Ensure that the lid audibly locks in. 5. Place the kettle on the base. 6. Press the on/off button , if you only intend to boil the water (100 °C). Or set a temperature: - Press the SET TEMP button repeatedly until the appropriate temperature LED illuminates in the operating panel. 40, 60, 80 or 100 °C are available to select from.
Keeping water warm The kettle has a keep-warm function. With a temperature of 40, 60, 80 or 100 °C, you can keep the water warm for approx. 30 minutes. Afterwards, the kettle switches off automatically; two signal tones will sound and all LEDs will extinguish. z If you have set a keep-warm temperature of 100 °C, the water will be kept warm within a range of 90-100 °C, in order to avoid excess steam generation.
After boiling: X Press the KEEP WARM button as soon as the signal tone sounds at the end of the boiling process. The appliance will automatically select the temperature to which you have heated the water as the keep-warm temperature. The LED of the relevant temperature, the KEEP WARM and on/off button illuminate. will The water will be kept warm. Dry-run protection A dry-run protection safeguards the appliance from damage. The protection switches on automatically if no more liquid is in the kettle.
4. Rinse the sieve under running water or clean it using a damp cloth. 5. Reinsert the sieve into its holder in front of the spout. Ensure that it locks in securely. If the sieve is already very calcified, place it into a mixture of water and vinegar (6:1 ratio) for a few hours. Afterwards, rinse the sieve with plenty of clear water. Descaling You should descale the kettle on a regular basis, as a very calcified kettle requires more electricity.
Faults and Rectification Fault Possible causes and rectification No function. - Mains plug in the socket? - Kettle placed correctly on the base? - Has the dry-run protection activated? (see page 11). Two signal tones sound when the button is pressed. - Function not possible, e.g. if you intend to heat the water to 60 °C, but the water is already at this temperature (e.g. from a previous boiling process). Boiling process taking very long.
Warranty Model: Electronic Kettle GT-WKe-01UK The appliance has been manufactured with the greatest care. The warranty period is three years from the date of purchase. Please retain the sales receipt as proof of purchase as without it the warranty claim cannot be processed. During the warranty period, the sales receipt and the completed warranty card with a description of the fault must be returned once you have contacted the service centre by phone. A new appliance will be returned.
Electronic Kettle 3 YEAR WARRANTY CARD Name Adress Email TelNo Model No. Location of purchase Warranty card Please send your completet Warranty Card to: Dario London Service Centre PO BOX 1125 Bromley BR1 9TW UK Hotline - UK: 0800 / 328 6020 Hotline - Ireland: 00800 / 4467 5888 Mail: info@dariolondon.
