Installation Instructions

ManualsBrandsDelta ManualsBathroom Remodel & Bathroom FixturesCassidy Deck Mounted Roman Tub Faucet Trim

10/25/13 Rev. E

For easy installation of your Delta

faucet you will need:

•ToREAD ALLtheinstructionscompletely

beforebeginning.

•ToREAD ALLwarnings,care,and

maintenanceinformation.

•Tocompletethedeckandvalverough-inpriorto

installingthistrimkit.

SILICONE

ASME A112.18.1 / CSA B125.1

ICC/ANSI A117.1

Models/Modelos

T2795&T4795

Series / Seria

Cassidy

T2795 T4795

www.deltafaucet.com

1/8"(3.17mm)

3/32"

(2.38mm)

TWO HANDLE ROMAN TUB TRIM

LLAVE Y SUS ACCESORIOS PARA BAÑERA

ROMANA DE DOS MANIJAS (MANERALES)

ACCESSOIRES DE FINITION DE ROBINET

À DEUX POIGNÉES POUR BAIN ROMAIN

You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin:

Para instalación fácil de su llave

Delta

usted necesitará:

•LEER TODASlasinstruccionescompletamente

antesdeempezar.

•LEER TODOSlosavisos,cuidados,e

informacióndemantenimiento.

•Paracompletarelbordeylainstalacióndevál-

vulasdentrodelasparedespreviaala

instalacióndelallaveysusaccesorios.

Pour installer votre robinet Delta

facilement, vous devez:

•LIRE TOUTESlesinstructionsavantdedéb-

uter;

•LIRE TOUSlesavertissementsainsiquetoutes

lesinstructionsdenettoyageetd’entretien;

•Installezlecorpsdurobinetetterminezle

pourtourdubainavantdeposerlesaccessories

definition.

67777

Write purchased model number here.

Escriba aquí el número del modelo comprado.

Inscrivez le numéro de modèle ici.

1/8"(3.17mm)

3/32"(2.38mm)

Summary of content (8 pages)

PAGE 1
TWO HANDLE ROMAN TUB TRIM 67777 LLAVE Y SUS ACCESORIOS PARA BAÑERA ROMANA DE DOS MANIJAS (MANERALES) ACCESSOIRES DE FINITION DE ROBINET À DEUX POIGNÉES POUR BAIN ROMAIN ASME A112.18.1 / CSA B125.1 ICC/ANSI A117.1 Models / Modelos T2795 & T4795 Series / Seria Cassidy T2795 T4795 Write purchased model number here. Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici. You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin: 1/8" (3.17mm) 3/32" (2.
PAGE 2
CLEANING AND CARE Care should be given to the cleaning of this product. Although its finish is extremely durable, it can be damaged by harsh abrasives or polish. To clean, simply wipe gently with a damp cloth and blot dry with a soft towel.
PAGE 3
Model / Modelo / Modèle T2795 Model / Modelo / Modèle T4795 RP72717▲ Lift Rod Barra de alzar Tige de Manoeuvre RP72724▲ Finial Pomo Grain RP73284▲ Set Screw & Button Tornillo de Presión y Botón Vis de Calage et Bouton RP73284▲ Set Screw & Button Tornillo de Presión y Botón Vis de Calage et Bouton RP41896 Glide Ring Aro para Deslizar L’anneau de Glissement RP72718▲ Spout Base w/Gasket Base del Tubo de Salidacon con Empaque Embase du Bec avec Joint RP52593 Stream Straightener, Gasket & Wrench Enderezad
PAGE 4
B. A. T4795 1 2 2 3 RP40668 Diverter Assembly Ensamble del Desviador Dérivation 1 2 3 1 Maintenance B. Model T4795 If faucet does not divert water from the spout to the hand shower, check that the lift rod (1) is securely threaded into the diverter (2). If the problem persists remove the lift rod and spout. Replace the diverter assembly RP40668. A. If faucet leaks from spout outlet: Shut off water supplies – Replace Seats and Springs (1).
PAGE 5
1 2 T2795 T2795 5 7 8 1 4 1 6 T4795 2 3 T4795 5 7 1 2 8 3/32" (2.38 mm) 3/32 po 4 1 6 2 3 Place bases (1) with gaskets (2) over end valves (3). OPTION: Use silicone under the gasket if deck is uneven. Install gasket (4) and spout (5) on the spout adapter (6). Be sure spout is resting firmly on the deck. Install set screw (7) and tighten to secure the spout (5). Insert button (8) into set screw hole. Model T2795 proceed to step 4. Model T4795 proceed to step 3.
PAGE 6
3 A. C. T4795 T4795 1 1 3 2 5 4 B. T4795 D. T4795 2 1 5 3 1 4 For Model T4795 Only C. Remove conical nut (1) from handshower nest (2) and insert braided metal hose through the handshower nest. Reassemble test cap (3) to braided hose to hold hose in place. Place handshower nest (2) on mounting piece (4). align in selected direction and tighten by escutcheon (5). OPTION: Use silicone under the base if deck is uneven. A. Install lift rod (1).
PAGE 7
5 4 T2795 1 1 1 3 T4795 2 2 1 2 Install handles and secure with set screw (1). Be sure glide ring (5) is properly seated in bottom of handles before installing. Push in button cover (3) to conceal set screw (1). either handle does not rotate in the correct direction, do the following: 1. Be sure that the end valves are installed correctly (with the hot v alve on the LEFT and both inlet tubes installed AWAY fro m the spout). 2.
PAGE 8
6 A. B. T4795 T4795 2 1 3 1 2 For Model T4795 Only B. Attach hand piece (1) to hose (2) with gasket (3) between connection. Refer to maintenance section (page 4) for correct diverter and lift rod function. A. Pull hose (1) to its farthest extension and point it down into the tub. Pull the lift rod (2) up to the full on position and flush water lines for one minute. After flushing turn off water at the bath valve handles. Return the lift rod to the down position. Sólo para los Modelos T4795 B.