Instructions / Assembly

ManualsBrandsDelta Manuals4 inch Centerset Sink FaucetsFoundations 4 in. Centerset 2-Handle Bathroom Faucet with Metal Drain Assembly in Stainless

www.deltafaucet.com

Write purchased model number here.

Escriba aquí el número del modelo comprado.

Inscrivez le numéro de modèle ici.

Model/Modelo/Modèle

B2510LF/B2512LF/

B2510LF-PPU/B2511LF-PPU/

B2512LF-PPU/B2515LF-PPU

Series/Series/Seria

Para instalación fácil de su llave Delta

usted necesitará:

Ŗ LEER TODAS las instrucciones completamente

antes de empezar.

Ŗ LEER TODOS los avisos, cuidados, e

información de mantenimiento.

Ŗ Comprar las conexiones correctas para el

suministro de agua.

For easy installation of your Delta

faucet you will need:

Ŗ To READ ALL the instructions completely

before beginning.

Ŗ To

READ ALL warnings, care, and maintenance

information.

Ŗ To purchase the correct water supply hook-up.

You may need/Usted puede necesitar/

Articles dont vous pouvez avoir besoin:

LIC

Pour installer votre robinet Delta

facilement, vous devez:

Ŗ LIRE TOUTES les instructions avant de débuter;

Ŗ LIRE TOUS les avertissements ainsi que toutes

les instructions de nettoyage et d’entretien;

Ŗ Acheter le bon nécessaire de raccordement.

06/07/12 Rev. G

ASME A112.18.1 / CSA B125.1

ASME A112.18.2 / CSA B125.2

SILICONE

65591

TWO

HAN

LE W

LESS

LAVA

CET

DE LAV

AMA

DE D

S MA

SIN

ARANDELAS

ROBIN

ET S

S R

ELLE

X MA

ETTES

R LAVA

Summary of content (8 pages)

PAGE 1
TWO HANDLE WASHERLESS LAVATORY FAUCET 65591 LLAVE DE LAVAMANOS DE DOS MANIJAS SIN ARANDELAS ROBINET SANS RONDELLE À DEUX MANETTES POUR LAVABO ASME A112.18.1 / CSA B125.1 ASME A112.18.2 / CSA B125.2 Model/Modelo/Modèle B2510LF/B2512LF/ B2510LF-PPU/B2511LF-PPU/ B2512LF-PPU/B2515LF-PPU Series/Series/Seria Write purchased model number here. Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici.
PAGE 2
CLEANING AND CARE Care should be given to the cleaning of this product.Although its finish is extremely durable, it can be damaged by harsh abrasives or polish.To clean, simply wipe gently with a damp cloth and blot dry with a soft towel. ® ® WARNING: SCRUBBING BUBBLES BATHROOM CLEANER and LYSOL BASIN TUB AND TILE CLEANER must not be used on the clear knob handles and levers. Use of these cleaners can result in cracked or severely damaged handles.
PAGE 3
RP74151Ÿ Hot & Cold Lever Handles w/Screws Manijas en palanca con tornillos de agua fría y caliente Manettes-leviers d’eau chaude et d’eau froide avec vis RP70815Ÿ Hot & Cold Lever Handles w/Screws Manijas en palanca con tornillos de agua fría y caliente Manettes-leviers d’eau chaude et d’eau froide avec vis RP41680Ÿ Hot & Cold Lever Handles w/Screws Manijas en palanca con tornillos de agua fría y caliente Manettes-leviers d’eau chaude et d’eau froide avec vis 5 RP20547 Retention Screws Note:These screwsm
PAGE 4
1 2 1 1 1. SHUT OFF WATER SUPPLIES. 2. Secure faucet to sink using locknuts provided (1). 1. CIERRE LOS SUMINISTROS DE AGUA. 2. Fije la llave al lavamanos con las contratuercas proporcionadas (1). 1. INTERROMPEZ L’ARRIVÉE D’EAU. 2. Fixez le robinet à l’évier à l’aide des écrous autofreinés fournis (1). Continue to either step 3 metal pop-up installation or step 4 plastic pop-up installation. If your model does not have a pop-up skip to step 5. Remove old faucet.
PAGE 5
B. 1 E A. SI LIC ON 3 1 7 2 3 5 4 4 3 6 8 2 C. D. 4 3 4 5 5 1 2 3 2 1 6 Metal Pop-Up installation A. Remove stopper (1) and flange (2). Screw nut (3) all the way down. B. Apply silicone to underside of flange (1). Insert body (2) into sink. Screw C. Remove pivot nut (1). Install horizontal rod (2) and stopper (3) as D. Attach horizontal rod (1) to strap (2) using clip (3). Insert lift rod (4) into Push washer (4) and gasket (5) down.
PAGE 6
4 A. B. 1 1 2 2 4 3 3 C. D. 3 4 1 6 5 1 7 3 2 1 2 4 Plastic Pop-Up installation A. Remove stopper (1) and flange (2). Screw nut (3) all the way down. B. Apply silicone to underside of flange (1). Insert body (2) into sink. C. Remove pivot nut (1). Install horizontal rod (2) and stopper (3) as D. Insert lift rod (1) through faucet and into strap (2). Tighten screw (3). Push black gasket (4) down. Screw flange onto body. Pivot hole (3) must face back of sink.
PAGE 7
5 6 2 1 3 1 2 A 5. CONNECT TO WATER SUPPLIES. (HOOK-UPS NOT PROVIDED). 6. FLUSH SYSTEM/CHECK FOR LEAKS. 5. CONECTE A LOS SUMINISTROS DE AGUA. 6. DEJE CORRER EL AGUA POR EL SISTEMA/EXAMINE POR SI HAY 5. RACCORDEMENT À LA TUYAUTERIE D’ALIMENTATION 6. RINÇAGE DE L’INSTALLATION ET VÉRIFICATION DE L’ÉTANCHÉITÉ. Determine which type of connection you will be making. (1) Ball nose risers (3/8" O.D. copper tubing) with coupling nuts (A) or (2) 1/2" I.P.S faucet connectors.
PAGE 8
5 4 1 2 Maintenance If faucet exhibits very low flow: A. Remove and clean Aerator (3) (page 3), or B. Clean Seats and Springs (2) of any debris SHUT OFF WATER SUPPLIES If faucet leaks from spout: Replace Stem Unit Assembly (1) and Seats and Springs (2)*, Repair Kit RP54801 or RP41701. *Install stems (1) correctly for proper handle rotation: Note: The stops (4) must point to the center of the faucet for proper handle rotation.