Specification

ManualsBrandsDelta ManualsOtherExposed Flush Valve in Chrome

Flush Valves

Exposed Flush Valves-Manual Operation

Model No: 81T231

SPECIFICATION:

Quiet action, Teck® exposed diaphragm flush valve

· polished chrome plated finish

· vandal resistant cover screw

· metal "non hold open" ADA Compliant oscillating handle

· vacuum breaker

· renewable seat

· *Chloramine resistant diaphragm attached to guide with forged metal

retainer.

· spud flange and concealed spud nut

· For flushing urinals with 3/4" top spud

· maximum 330mm(13") from centerline of valve inlet to top of urinal

· external water conserving flush volume adjustment

· 1" FIP/3/4" Copper sweat inlet adaptor for angle check stop with

protecting cap

· adjustable 121mm (4.75”) plus or minus 11mm (7/16”) inlet/valve

outlet centers

· Cover tube and wall flange

· 2.7 Litre (0.70 US GAL.) Factory Set Flush at 60 psi- FIELD

ADJUSTABLE from 0.47 to 3.78 Litre Flush (1/8 to 1.0 US GAL.)

COMPLIES WITH:

CSA certified.

· Complies to ASSE 1037

· IAPMO listed

· ADA compliant and meets Handicapped Accessibility Standard ASME

117.1 of less than 5 lbs operating force

· (Contact Delta Representative for State and/or Local Approvals)

(Dimensional drawing on following page)

OPERATION:

Not Available

Delta reserves the right (1) to make changes to specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference.

Measurement may vary plus or minus 6mm(0.25"). Mounting locations are suggested only. Check with local codes for requirements in your area.

SpecSelect Online - 1.0.5

Page of1 2

Delta Faucet Company - 55 East 111th St. - Indianapolis, Indiana, USA 46280 - (317) 848-1812

Delta Faucet Canada - 395 Matheson Blvd E - Mississauga, Ontario, Canada L4Z 2H2 - (905) 712-3030

Summary of content (2 pages)

PAGE 1
Flush Valves Exposed Flush Valves-Manual Operation Model No: 81T231 · · · · · COMPLIES WITH: SPECIFICATION: CSA certified. Complies to ASSE 1037 IAPMO listed ADA compliant and meets Handicapped Accessibility Standard ASME 117.
PAGE 2
Model No: 81T231 Delta reserves the right (1) to make changes to specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference. Measurement may vary plus or minus 6mm(0.25"). Mounting locations are suggested only. Check with local codes for requirements in your area. Delta Faucet Company - 55 East 111th St.