Specification

15½"
7⅝"
9⅛"
*15"
*
6"
12⅛"
Front Access
Front Side View
Access Panel
1⅝"
SER
NO.
NO.
SIZE IN.
MODEL
SET
PSIG
CAP
LBS/HR
2⅜"
2¾"
2⅞"
GENERATOR STANDARD
SPECIFICATIONS:
• Water Supply - 3/8" Compression Fitting, 120 PSI max
• Steam Outlet - 3/4" Brass NPT male thread
• Pressure Relief Valve - 3/4" NPT female thread
• Drain Outlet - Capped 1/2" Brass NPT male thread
• Supplied with a 35' control cord
• Generator shipped weight - 30 lbs
• Steam Generators should be accessible for service.
• Steamhead to be mounted 12" to 18" above floor or
6" above rim of tub and as far from the seating area
as possible. Do not locate below the user control.
• Required Equipment - EP103350 control and
steam head
• Required Electrical Service - Dedicated circuit required:
See Specification Chart for proper electrical
requirements.
5P-EST04-▲
5P-EST06-▲
5P-EST07-▲
5P-EST10-▲
STEAM GENERATOR
PACKAGE
■ 4.5KW (5P-EST04)
■ 6KW (5P-EST06)
■ 7.5KW (5P-EST07)
■ 10KW (5P-EST10)
DSP-S-5P-EST04 Rev. A
COMPLIES WITH:
• UL/cUL Listed
WARRANTY
• See separate warranty document
Steam Generator Specication Chart
6
7.5
10
150
250
450
240/1/25
240/1/31
240/1/42
30
40
50
Model
Number
KW
Rating
Max. Adj. Cu. Ft.
Range*
Volts/Phase/
Max. Amps
Line
Fuse
15" x 6" x 15.5"
Dimensions
L x W x H
EP103324
EP103325
EP103326
* Refer to sizing guidelines to accurately determine the proper size generator for the installation.
90°C copper wire is required for generator connection. Installation shall be in accordance with NEC and local electrical
codes.
EP103323 4.5 75 240/1/19 25
15" x 6" x 15.5"
15" x 6" x 15.5"
15" x 6" x 15.5"
GENERATOR FEATURES:
• Microprocessor based diagnostics and LED indication
• Stainless Steel tank construction
Delta Faucet Company
55 E. 111th Street, Indianapolis, IN 46280
350 South Edgeware Road, St. Thomas, ON N5P 4L1
© 2023 Delta Faucet Company
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue
models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or
www.deltafaucet.com for finish options and product availability.
▲ Designate Proper Finish Suffix
1"
(25 mm)
3"
(76 mm)
Square
2 3/4"
(70 mm)
Square
5/8"
(16 mm)
13/16"
(21 mm)
STEAMHEAD STANDARD
SPECIFICATIONS:
• Includes 3/4" NPT female thread for connection to
steam line
• Steam line should protrude 1/4" to 1/2" from
finshed surface
• Steam head should be mounted 12" - 18" above the
finished floor or 6" above the rim of the tub. The
mounting location must also not be directly beneath
the control and should be as far from the seating area
as possible.
• Includes silicone cover
CONTROL STANDARD
SPECIFICATIONS:
• Surface Mount - 1 1/2" hole required
• Must mount inside the steam room away from
steam head.
• Mount control near seating area and not above
Steam head
• Control should be mounted 48" above the floor
• Steam head to be mounted 12" to 18" above the
finished floor or 6" above the rim of the tub and as far
from the seating are as possible.
• Package includes: Control, 35' multi-conductor
cable, 6-Pin coupler, strain relief clamp, silicone sealant,
and Installation and Operating Instructions
CONTROL FEATURES:
• Preset time and programmable temperature
• Digital display of ambient and set temperature