Installation Guide

1
10/20/11 Rev. A
Write purchased model number here.
Escriba aquí el número del modelo comprado.
INSTALLATION INSTRUCTIONS FOR
ADJUSTABLE WALL BAR
72632
Models
55024▲ & 55030▲
Series
www.deltafaucet.com
▲ Designate proper finish suffix
72632
The installation of your new Delta
®
adjustable bar unit is simple and
easy requiring no special tools or skills. Caution: Use care to avoid
marring or scratching chromed and plastic surfaces. A personal shower
offers numerous possibilities of connections to water supply. The hose
will connect easily to the shower arm, elbow at the shower outlet, Delta
®
shower diverter (permitting existing shower to remain in use), or Delta
®
diverter tub spout (permitting this shower to be added to baths without
a shower). It is important to establish your water supply connections
first, as this avoids mounting the bar too far from the water supply outlet,
creating excessive strain on flexible hose. As subsequent instructions
specify, the bar should be mounted in a vertical position at the most
convenient height.
Conversion of Water Supply
Conventional Water Supply For wall shower/hand shower use.
Installation:
1. Remove existing shower head from shower arm.
2. Attach flexible hose to exposed threads on shower arm using gasket.
Installation:
1. Remove existing shower head and escutcheon from shower arm.
2. Mark shower arm at wall and remove shower arm replacing it with a nipple
1/2 inch longer than unexposed length of shower arm to the mark.
3. Attach Delta
®
supply elbow with flange onto nipple and tighten securely.
Caution: Do not twist supply pipe in wall.
4. Attach hose to supply elbow using gasket provided.
Shower Diverter Water Supply For use with existing shower.
Installation:
1. Remove shower head by turning counter clockwise.
2. Attach female threaded end of shower diverter to shower arm, using
gasket supplied. Do not overtighten.
3. Replace shower head onto end af diverter shower. A sealant such as pipe
compound or plumber tape may be required to prevent water seepage.
4. Attach flexible hose to shower diverter using gasket supplied. Do not
overtighten.
Tub Spout Water Supply For baths without shower.
Installation:
1. Remove present tub spout by turning counter clockwise.
2. Replace with Delta
®
diverter tub spout following directions enclosed inside
package.
Hose Care
Your hose is of high quality chrome plated spiral wound around a rubber inner liner. It will provide many years of quality performance with proper
care. Avoid the following conditions which may weaken or damage your hose and void your warranty.
Do not pull, strain, stretch, or jerk hose.
Do not wind, twirl or twist hose.
Do not bend, knot, coil or crimp hose.