Specification
51584
p
Submitted Model No.:
Delta reserves the right (1) to make changes in specications and materials, and (2) to change or discontinue
models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or
www.deltafaucet.com for nish options and product availability.
DSP-B-51584 Rev. A
Specic Features:
Delta Faucet Company
55 E. 111th Street, Indianapolis, IN 46280
350 South Edgeware Road, St. Thomas, ON N5P 4L1
© 2022 Delta Faucet Company
p
Designate proper nish sufx
24 7/16"
(620 mm)
27 3/4"
(703 mm)
COMPLIES WITH:
•
ASME A112.18.1 / CSA B125.1u
•
EPA WaterSense
®
SLIDE BAR WITH
HAND SHOWER
n 7-Spray Setting Hand Shower
STANDARD SPECIFICATIONS:
• Maximum 1.75 gpm @ 80 psi, 6.6 L/min @550 kPa
• Hand held shower with 7 spray settings
• Easy turn dial to change hand shower spray settings,
includes pause, a non-positive shut-off
• Certified dual check valves for backflow prevention
•
60"- 82" (1524 mm - 2083 mm) stretchable metal hose
• 27 3/4
" (703)
slide bar with adjustable slide (allows for adjustable
shower height), not to be used as a grab bar
• Slide bar hand shower mount for hands-free showering
2 3/8"
(61 mm)
7/8"
(22 mm)
1/2" NPT
4 1/2"
(114 mm)
WARRANTY
• Parts and Finish - Lifetime limited warranty; or for
commercial purchasers, 10 years for multi-family
residential (apartments and condominiums) and 5 years
for all other commercial uses, in each case from the
date of purchase.
• Electronic Parts and Batteries (if applicable) -
5 years from the date of purchase; or for commercial
purchasers, 1 year from the date of purchase.
No warranty is provided on batteries.
9 13/16"
(249 mm)
FEATURES:
• Touch-Clean
®
Nozzles
• H2Okinetic
®
Technology Hand Shower
• ProClean
TM
spray
setting
60~82"
(1524~2083 mm)
u Your Delta Faucet handshower incorporates a backflow protection system that has been
tested to be in compliance with ASME A112.18.3 and ASME A112.18.1/ CSA B125.1.
It incorporates two certified check valves in series, which operate independently and are
integral, non-serviceable parts of the wand assembly.