Specification

Submitted Model No.:
Delta reserves the right (1) to make changes in specications and materials, and (2) to change or discontinue
models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or
www.deltafaucet.com for nish options and product availability.
DSP-B-51386 Rev. B
Specic Features:
6 1/2"
(165 mm)
51386-
▲
51386-
▲
-PR
2 13/16"
(71 mm)
2"
(51 mm)
8"
(203 mm)
60"-82"
(1524 mm-
2083 mm)
2 13/16"
(71 mm)
▲
Designate proper nish sufx
STANDARD SPECIFICATIONS
• Max. flow rate 1.75 gpm @ 80 psi, 6.6 L/min @ 550 kPa
• Certif ied dual neoperl check valves for backf low protection
• Hand held shower with three spray settings, pause is a
non-positive shut-off.
• 60"-82" (1524 mm - 2083 mm) stretchable metal hose
• Wall bar for hands-free showering
• Wall bar w/adjustable slide (allows for adjustable shower
height). Not to be used as a grab bar
• Lumicoat™ is not applied to the slide bar or shower hose
FEATURES:
• Touch-Clean
®
Nozzles
• Lumicoat™ Finish (-PR models only)
• Lumicoat™ Finishes easily wipe clean without cleaners
and chemicals on the products most commonly
touched areas
Delta Faucet Company
55 E. 111th Street, Indianapolis, IN 46280
350 South Edgeware Road, St. Thomas, ON N5P 4L1
© 2021 Delta Faucet Company
WARRANTY
• Parts and Finish - Lifetime limited warranty; or for
commercial purchasers, 10 years for multi-family
residential (apartments and condominiums) and
5 years for all other commercial uses, in each case
from the date of purchase.
• Electronic Parts and Batteries (if applicable) - 5
years from the date of purchase; or for commercial
purchasers, 1 year from the date of purchase. No
warranty is provided on batteries.
SLIDE BAR
HAND SHOWER
■ 3-Spray Setting Hand Shower
COMPLIES WITH:
• ASME A112.18.1 / CSA B125.1 u
• ASME A112.18.3
• EPA WaterSense
®
Your Delta Faucet hand shower incorporates a
backflow protection system that has been tested
to be in compliance with ASME A112.18.3 and
ASME A112.18.1/CSA B125.1. It incorporates
two certified check valves in series, which
operate independently and are integral,
non-serviceable parts of the wand assembly.
u
22 3/4"
(578 mm)
19 9/16"
(498 mm)
24 5/8"
(626 mm)
HAND SHOWER
DOUCHE À MAIN
REGADERA DE MANO