Instructions / Assembly

ManualsBrandsDelta ManualsPower Tool Accessories14 in. Mobile Base for 28-206 Band Saw with Enclosed Stand

A26504 - 03-19-08

MODELS

50-273, 50-274, 50-275, 50-276, 50-277, 50-278, 50-279, 50-281, 50-286, 50-287,

50-288, 50-293, 50-296, 50-324, 50-333, 50-342, 50-729, & 50-941

These units feature welded, heavy-gauge steel supports with bolt-on foot levers, single swivel cast-

ers, and two sturdy wheels. Two adjustable foot pads positioned opposite the fixed wheels assure

stable four-corner contact when the base is lowered into the stationary position. The convenient foot

lever raises and lowers the base for ease in moving and positioning the machine, and allows the

machine to be moved aside for cleaning purposes. The following list shows catalog numbers and

dimensions of available mobile bases with their corresponding Delta tools.

MOBILE MACHINERY BASES

INTRODUCTION

Catalog Number Dimensions

(A x B)

For use with

50-273 20-5/8" x 20-5/8" 10" Unisaws®, Heavy Duty Wood Shapers

50-274 17-1/4" x 19-1/2" Light Duty Wood Shapers, Utility Wood Shapers

*6" Belt/12" Disc Finishing Machines, *6"

Belt Finishing Machines, *12" Disc Finishing

Machines, *14" Band Saws

(*On enclosed type stands only)

50-276 17-1/4" x 36-3/4" DJ-20 8" Jointer

50-277 25 3/4" x 23-1/4" *10" Contractor’s Saws®, *13" Planers,

15" Planer

(*On open type straight leg stands)

50-278 21.5" x 19" Hybrid Saws (36-714, 36-653)

50-281 21" x 35-3/4" 31-250 Drum Sander

50-286 28" x 24-3/4" 31-280 Sanding Center, 36-630 *10" Contractor’s

Saws®, 13" Planers, Line Boring Machine

*On open type flared leg stands only

50-287 22-1/2" x 32" 12" Band Saws

50-288 20" x 29" 31-260X Drum Sander

50-293 23" x 27" 37-190 6" Jointer, 22-790X Planer

50-296 17" x 27" 37-380 8" Jointer

50-324 24-1/2" x 24-1/2" DC380 15" Planer

50-333 13-1/2" x 18-1/2" 37-195 6" Professional Jointer

50-342 20 x 32-1/2" 31-396 Oscillating Edge Sander

50-729 20-3/4" x 22-3/4" 10" Cabinet Saw

50-941 19-1/2" x 22" 28-206 & 28-276 14" Band Saw

(Enclosed Base) with Open Stand

Summary of content (8 pages)

PAGE 1
A26504 - 03-19-08 MOBILE MACHINERY BASES MODELS 50-273, 50-274, 50-275, 50-276, 50-277, 50-278, 50-279, 50-281, 50-286, 50-287, 50-288, 50-293, 50-296, 50-324, 50-333, 50-342, 50-729, & 50-941 INTRODUCTION These units feature welded, heavy-gauge steel supports with bolt-on foot levers, single swivel casters, and two sturdy wheels. Two adjustable foot pads positioned opposite the fixed wheels assure stable four-corner contact when the base is lowered into the stationary position.
PAGE 2
CARTON CONTENTS 1 4 5 6 8 3 7 9 2 Fig. 1 1. 2. 3. 4. Mobile base Caster assembly Foot lever assembly Support plate 5. 6. 7. 8. 9. Fig. 2 5/16-18 x 4" Hex head screw 3/8-16 x 2" Carriage bolts (3) 3/8" Flat washers (3) 3/8-16 Hex nuts (3) 5/16-18 Locknut assembly To reduce the risk of injury, turn unit off and disconnect it from power source before installing and removing accessories, before adjusting or when making repairs. An accidental start-up can cause injury. 1. 2. 3.
PAGE 3
BASES MOBILES DE MACHINERIE MODÈLES 50-273, 50-274, 50-275, 50-276, 50-277, 50-278, 50-279, 50-281, 50-286, 50-287, 50-288, 50-293, 50-296, 50-324, 50-333, 50-342, 50-729, & 50-941 INTRODUCTION Ces unités se caractérisent par des pièces d’appui soudées en acier fort comportant des leviers de commande à pied boulonnés, des roulettes pivotantes monoblocs et deux roues robustes.
PAGE 4
CONTENU DE L’EMBALLAGE 1 4 5 6 8 3 7 2 1. 2. 3. 4. 5. 6. 7. 8. 9. Fig. 1 Base mobile Ensemble de roulettes Module de levier de commande à pied Plaque de fixation 9 Fig.
PAGE 5
BASES MÓVILES PARA MAQUINARIA MODELOS 50-273, 50-274, 50-275, 50-276, 50-277, 50-278, 50-279, 50-281, 50-286, 50-287, 50-293, 50-296, 50-324, 50-333, 50-342, 50-729, & 50-941 INTRODUCCIÓN Estas unidades presentan soportes de acero de calibre grueso soldado con palanca para pie y pernos, ruedas giratorias simples y dos ruedas firmes. Dos almohadillas para pie ajustables opuestas a las ruedas fijas aseguran un contacto estable en las cuatro esquinas cuando la base baja a la posición estacionaria.
PAGE 6
CONTENIDO DE LA CAJA 1 4 5 6 8 3 7 9 2 1. 2. 3. 4. Fig. 2 Fig. 1 5. 6. 7. 8. 9.
PAGE 7
NOTES
PAGE 8
Two Year Limited New Product Warranty Delta will repair or replace, at its expense and at its option, any new Delta machine, machine part, or machine accessory which in normal use has proven to be defective in workmanship or material, provided that the customer returns the product prepaid to a Delta factory service center or authorized service station with proof of purchase of the product within two years and provides Delta with reasonable opportunity to verify the alleged defect by inspection.