Installation Guide

ManualsBrandsDelta Manuals8 inch Widespread Sink FaucetsVero 8 in. Widespread 2-Handle High-Arc Bathroom Faucet in Venetian Bronze

TWO HANDLE WIDESPREAD

LAVATORY FAUCETS

LLAVES DE LAVAMANOS

EXTENDIDAS DE DOS MANIJAS

ROBINETS À ENTRAXE LONG À

DEUX POIGNÉES POUR LAVABO

Model/Modelo/Modèle

3553LF

Series/Series/Seria

Para instalación fácil de su llave Delta

usted necesitará:

LEER TODAS las instrucciones completamente

antes de empezar.

LEER TODOS los avisos, cuidados, e

información de mantenimiento.

Comprar las conexiones correctas para el

suministro de agua.

For easy installation of your Delta

faucet you will need:

To READ ALL the instructions completely

before beginning.

To READ ALL warnings, care, and maintenance

information.

To purchase the correct water supply hook-up.

Write purchased model number here.

Escriba aquí el número del modelo comprado.

Inscrivez le numéro de modèle ici.

You may need/Usted puede necesitar/

Articles dont vous pouvez avoir besoin:

SILICONE

Pour installer votre robinet Delta

facilement, vous devez:

LIRE TOUTES les instructions avant de débuter;

LIRE TOUS les avertissements ainsi que toutes

les instructions de nettoyage et d’entretien;

Acheter le bon nécessaire de raccordement.

5/64" (2 mm)

01/02/13 Rev. Dwww.deltafaucet.com

ASME A112.18.1 / CSA B125.1

ASME A112.18.2 / CSA B125.2

ICC/ANSI A117.1

65981

SILICONE

65981

Summary of content (6 pages)

PAGE 1
TWO HANDLE WIDESPREAD LAVATORY FAUCETS 65981 LLAVES DE LAVAMANOS EXTENDIDAS DE DOS MANIJAS ROBINETS À ENTRAXE LONG À DEUX POIGNÉES POUR LAVABO ASME A112.18.1 / CSA B125.1 ASME A112.18.2 / CSA B125.2 ICC/ANSI A117.1 Model/Modelo/Modèle 3553LF Series/Series/Seria Write purchased model number here. Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici.
PAGE 2
1 A. C. 1 3 5 1 8 2 7 4 3 2 4 6 B. D. 8 9 5 6 3 1 3 2 5 3 5 4 2 3 1 7 5 4 A. Slide hot (1) and cold (2) end valves with gasket (3) through sink. Note: Hot side end valve is labeled (4)! Note:If surface is uneven, use silicone under the gasket. Secure end valves with washers (5) & C. Install spout (1) and gasket (2). Secure with bracket (3) and nut (4). Note: If surface is uneven, use silicone under the gasket. threaded brackets (6). Hand tighten brackets (6) onto shank (7).
PAGE 3
2 3 2 Gasket Junta Joint à débit partiel 3 Gasket Junta Joint à débit partiel 1 Springloaded Plug Tapón a resorte Bouchon à ressort 4 Washer Arandela Rondelle 5 Lock Nut Tuerca de Fijación Contre-écrou 6 Tail Cola Queue Supply Line Connections Turn on hot and cold water supplies and flush water lines into a container for one minute. Important: This flushes away any debris that could cause damage to internal parts.
PAGE 4
1 5 2 3 1/2" (13mm) IPS Make Connections to water lines: Choose hook-ups for 1/2" I.P.S. connections: (1) Ball nose riser (3/8" O.D. copper tubing) with supplied coupling nuts (3) or (2) 1/2" I.P.S. faucet connector Check for Leaks Check all connections at arrows for leaks. Retighten if necessary, but do not overtighten. Use the enclosed coupling nuts (3) with the ball nose risers (1). Brass Craft or Plumbshop supply lines are recommended. Use two wrenches when tightening. Do not over tighten.
PAGE 5
RP63349▲ Hot Handle Assemblies Montajes manetas calientes Poignées équipées chaudes RP63367 Set Screw (2) Tornillo de Ajuste (2) Vis de Calage (2) RP51008 Glide Ring (2) Aro para Deslizar (2) L’anneau de Glissement (2) Contact your distributor for handle options/finishes. Comuníquese con su distribuidor para obtener opciones en el tipo de manija y detalles (acentos)/acabados.
PAGE 6
CLEANING AND CARE Care should be given to the cleaning of this product. Although its finish is extremely durable, it can be damaged by harsh abrasives or polish. To clean, simply wipe gently with a damp cloth and blot dry with a soft towel.