Manualshelf

Instruction manual

ManualsBrandsDelta ManualsVacuums3 H.P. SINGLE-STAGE DUST COLLECTOR 50-853
12345678910
STATIONARY POWER TOOLS
50
647
10" Deluxe
Bench Saw
• Blade tilting and height
control knobs are up-front
for convenience
• Rip fence locks front and
rear to maintain accuracy when cutting
• Ample capacity to cut 3" at 90°; 2-1/2" at 45°
36-540C
10" Basic
Bench Saw
• Lightweight for portability
• Ample capacity to cut 3" at
90°, 2-1/2" at 45°
• Front and rear locking grip
fence maintains accuracy
36-550C
Order No. Mfg. No. Description RPM
5009.00025 36-540C 13 amp, 115 V, single phase 4700
5009.00028 36-545C* 13 amp, 115 V, single phase 4700
*With stand
Order No. Mfg. No. Description RPM
5009.00031 36-550C 13 amp, 115 V, single phase 4750
5009.00034 36-560C* 13 amp, 115 V, single phase 4750
*With stand and extension table kit
Canadian
Unisaw
Basic Unisaw (10"
Tilting Arbor includes
34-639 see-through
blade guard; 43-349
extension wing (1); 34-105 combination blade; 34-895 mitre
gauge; 34-154 table insert; 41-644 motor pulley, (3/4"
bore); 49-124 set of three matched V-belts, motor and con-
trols. Excludes fence and 34-812 rail set.
34-457
Order No. Mfg. No. Motor Voltage
RIGHT-TILTING MODELS
5009.00100 34-457 3 HP 230V, Single Phase
5009.00103 34-814 5 HP 230V, Single Phase
5009.00106 34-459 3 HP 230V, Three Phase
5009.00109 34-462 3 HP 575V, Three Phase
LEFT-TILTING MODELS
5009.00112 36-953 3 HP 230V, Single Phase
5009.00115 36-950 3 HP 230V, Single Phase
5009.00118 36-951 5 HP 230/460V, Three Phase
5009.00121 36-952 5 HP 230V, Three Phase
5009.00124 36-954 5 HP 230V, Single Phase
ACCESSORIES
5009.00127 34-639 See-through blade guard
5009.00130 43-349 Extension wing
5009.00133 34-105 Combination blade
5009.00136 34-895 Mitre gauge
5009.00139 34-154 Table insert
5009.00142 41-644 Motor pulley, (3/4" bore)
5009.00145 49-124 Set of three matched V-belts
5009.00148 34-812 Rail set.
Order No. Mfg. No. Amps Brake Arbor (in)
5009.00037 C10RA2S 15 Yes 5/8
10" Table Saw
With Stand
• Powerful 15 amp 2.6 hp
motor with steel housing
• High quality rip fence with
cam-locking action
• Front and rear guide bars
for accurate positioning
• T-slot mitre gauge
• No-load speed: 5000 RPM
• Large 34" x 19-5/8" table for increased material stability
• See-through blade guard with splitter and spring loaded
anti-kickback fingers
Includes: carbide tipped saw blade 36 tooth 314616, hex
wrench 314590, dust collection port elbow 314592, open
end wrench 314591
10" Table Saw
• Heavy-duty cast-iron
table
• Table has “T”- Slots for
miter
gauge and beveled front
edge
• See-through blade guard with anti-kick back attachment
• Comes complete with 10’’ blade, metal stand, miter
gauge, motor and rip fence
• Depth of cut at 45°: 2-1/8"
• Depth of cut at 90°: 3-1/8"
• Table size with extensions: 40-3/8 x 27"
• Pre-wired at 110V
• Motor: 18 amp @ 110V, 9 amp @ 220V
• Voltage: 110/220V, 1 phase, 60 Hz
IMPORTANT: This 10" table saw must be connected to a
30 amp circuit to be operated at 110V.
Order No. Mfg. No. Amps Blade Arbor (in) RPM
5009.000040 KC-10RC 18 10 5/8 4500
Rip Fence
System
• Adds a whole
new dimension to
precision wood-
cutting, on our
commercial and
contractors table
saws
• Designed to fit
our table saws and many other brands of various import-
ed and domestic table saws
Order No. Mfg. No. Description
5009.000043 KC-10GC Table Saw comes with SF-10S52 Rip Fence

Summary of content (43 pages)