Technical Specifications
• The 23-197 8 in. Variable Speed Grinder has variable speed
control offering you convenience and versatility in your
grinding, sharpening, buffing and polishing operations
• Upfront variable speed dial allows you to easily control speeds
from 2,000 RPM to 3,400 RPM for a fine level of control
depending on the materials you are working with
• Features a 5 Amp induction-type motor for powerful
performance
• Incorporates two different grits for sharpening and grinding
• The left hand tool rest has a drill bit rest milled into the
surface so you’ll get the correct angle on the tip at all times
• Two piece tool rests are independently adjustable to
compensate for wheel wear and to achieve different angles
• Water tray to help keep workpiece cool while grinding
• Work light with a separate on/off switch and flexible goose
neck provides illumination for set up and while grinding
• Cast iron base for durability and reduces vibration during
operation
• Full-size safety shields are clear and have thumb screws for
easy adjustment
• Includes (1) 36 Grit Wheel, (1) 60 Grit Wheel, (4) rubber feet
to help prevent movement, 2 safety shields, work light (40-
Watt bulb not included), (2) fully-adjustable tool rests and
diamond wheel dresser
• Motor: 5 AMP, 120 Volt, 1 Phase
• Shaft Diameter: 5/8 in.
• Wheel Dimensions: 8 in. Diameter x 1 in. Thick
• Wheel Speed: 2,000 to 3,400 RPM
• Wheel Grit: 36 and 60 Grit Wheels
• Cord Length: 6 feet
• Assembled Depth: 11 in.
• Assembled Width: 16 1/2 in.
• Assembled Height (not including light): 12 1/2 in.
• Base Dimensions: 7 1/2 in. Depth x 9 3/4 in. Width
• Tool Weight: 41.1 lbs. (Net); 45.5 lbs. (Gross)
Specifications
Features
8 in. Variable Speed Grinder
23-197
water tray
variable
speed dial