Specification

55 E. 111th Street, Indianapolis, Indiana 46280
350 South Edgeware Road, St. Thomas, ON N5P 4L1
© 2015 Masco Corporation of Indiana
Submitted Model No.:
Specific Features:
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both
without notice or obligation. Dimensions are for reference only. See current full-line price book or www.deltafaucet.com for
finish options and product availability.
16959-SD-DST▲
Optional 10 7/8"
Escutcheon
3/8" compression
fitting
KITCHEN
FAUCETS
■ Montauk™ Collection
■ Single Handle Pull-Out
FEATURES:
• DIAMOND Seal
®
technology
• MagnaTite
®
magnetic docking
• Touch-Clean
®
spray head
STANDARD SPECIFICATIONS:
• Max flow rate: 1.50 GPM @ 60 PSI (5.68 L/Min @
414 kPa) in spray and standard aerated mode
• Max flow rate: 2.20 GPM @ 60 PSI (8.33 L/Min @
414 kPa) in aerated mode using Multi-Flow™ feature
• Exposed mounting on one, two, three, and four hole
sinks (escutcheon optional, included)
• Control mechanism is diamond coated ceramic cartridge
• 3/8” O.D. straight, staggered PEX supply tubes, 30”
(762 mm) and 31 1/2” (800 mm) long
• Spout is connected to valve body with a 53”
(1346 mm) long hose
• Spout swings 120°
• Red/blue graphics on handle button indicate
hot/cold temperature
• Pull-out spout operates in an aerated stream or spray
mode via an easy push button
• Soap dispenser bottle holds up to 8 oz.
• Lever handle returns to the neutral position when
valve is turned off
• Standard 3/8” compression gasket fittings
• Integral double check valves in spout
WARRANTY:
• Lifetime limited warranty on parts (other than
electronic parts and batteries) and finishes; or, for
commercial users, for 5 years from date of purchase.
• 5 year limited warranty on electronic parts (other than
batteries); or, for commercial users, for 1 year from the
date of purchase. No warranty is provided on batteries.
COMPLIES WITH:
• ASME A112.18.1 / CSA B125.1
• ASME A112.18.6
Indicates compliance to
ICC/ANSI A117.1
• "LF" models verified compliant with .25% weighted
average Pb content regulations
DSP-K-16959-SD-DST Rev. A
▲ Designate proper finish suffix
3/8"
compression
fitting
3 Hole Mount
Single Hole Mount
2 1/8"
(55 mm)
2 7/8"
(73 mm)
2 3/8”
(61 mm)
4x 1 3/8" (35 mm)
hole size
8" (203 mm)
centers
2 1/2” (64 mm)
max. deck
thickness
2 1/2" (64 mm)
max. deck thickness
10 7/8" (276 mm)
10 7/16"
(265 mm)
3 1/8"
(78 mm)
2 1/2" (64 mm) clearance
to back splash
13 11/16”
(347 mm)
13 11/16”
(347 mm)
30"
(762 mm)
30"
(762 mm)
31 1/2"
(800 mm)
31 1/2"
(800 mm)
10”
(254 mm)
9"
(228 mm)
9”
(228 mm)
10"
(254 mm)
2 1/2" (64 mm) clearance
to back splash
2 3/8”
(61 mm)
4x 1 1/8” to 1 1/2”
(29 mm to 38 mm)
hole size
6 11/16"
(170 mm)
6 11/16”
(170 mm)