Specification Sheet

ManualsBrandsDelta ManualsShower ComponentsDelta Rough-In Flush Valve for Model 1600T9003TR from the Commercial Series

4 4 4

Delta reserves the right (1) to make changes in speciﬁcations and materials, and (2) to change or discontinue models, both without notice or obligation.

Dimensions are for reference only. See current full-line price book or www.specselect.com for ﬁnish options and product availability.

(1) When used for TOP Inlet Urinal Fixture - Exposed Tubing, Flanges, Elbow, etc. SUPPLIED by Others. (2) 1600T9006 & 1601T9006 ordered as complete product only. No RI or TR available.

Refer to www.specselect.com for individual models. Note: Use this page front and back, with speciﬁcation drawing page referenced above, as product submittal sheets.

DESCRIPTION PRODUCT NO.

Hardwire 1600T 9 0 0 RI

Hardwire 1600T 9 0 0 TR

Battery 1601T 9 0 0 RI

Battery 1601T 9 0 0 TR

Hardwire with Battery Backup 1600T 9 0 0 RI

Hardwire with Battery Backup 1600T 9 0 0 TR

-BB

Speciﬁcation: (example)

• Battery (4 ‘C’ cell) or Hardwire (24 VAC) infrared electronic

urinal flushing system

• Stainless steel cover with integral sensor utilizing H

Optics

technology

and

S/S vandal resistant mounting screws, metal mounting box

• Power function light, field selectable sensor range

• Electronic manual override

• Preset blocking time

• Slow closing solenoid valve, integral stop

and...

with... (add control/sensor box required)

with... (transformer – specify separately – See Back Page)

Electronic Washdown Urinal

1600T and 1601T Series

Engineer/Architect Approval

Model Speciﬁed:

Approval: Date:

CONTROL BOX

NOT APPLICABLE

4 4

For RECESSED MOUNTING – TOP INLET

URINAL (1) Components ASSEMBLED in

8" Box, w/Integral Sensor in S/S Cover.

SEE Specification Drawing #18

Components only UNASSEMBLED (1)

4" Box w/Integral Sensor in S/S Cover.

SEE Specification Drawing #19 (2)

For RECESSED MOUNTING –

BACK INLET URINAL Components

ASSEMBLED in 8" Box, w/Integral Sensor

in S/S Cover, S/S Outlet Hose.

SEE Specification Drawing #18

1600T9003RI and

1600T9003TR

DSP–1600T9 Rev. G Page 6.C.7

-BB Required on

“TR” Only.

Note: Rough-in and Trim Ordered

Separately for all Models , Except

1600T9006 & 1601T9006 which

are Ordered Complete.

DSP–1600T9 Rev. G

Summary of content (4 pages)

PAGE 1
Electronic Washdown Urinal 1600T and 1601T Series 1600T9003RI and 1600T9003TR Specification: (example) • Battery (4 ‘C’ cell) or Hardwire (24 VAC) infrared electronic urinal flushing system • Stainless steel cover with integral sensor utilizing H2Optics® technology and S/S vandal resistant mounting screws, metal mounting box • Power function light, field selectable sensor range • Electronic manual override • Preset blocking time • Slow closing solenoid valve, integral stop and... with...
PAGE 2
Electronic Washdown Urinal 1600T and 1601T Series 1600T9001 Approvals: • IAPMO listed to CSA B125.3 and ASSE 1037 • ADA Compliant and meets Handicapped Accessibility Standard ICC/ANSI A117.1 of less than 5 lbs. operating force. (Contact Delta Representative for State and/or Local Approvals.) 1600T9001RI AND 1600T9001TR TYPICAL INSTALLATION Infrared sensor 25mm (1") 203 x 206 x 102mm (8" x 8 1/8" x 4") control box Back inlet urinal connection outlet hose OPERATION: • 8 second blocking time.
PAGE 3
Specification Drawing #18 URINAL VALVE ASSEMBLED CONTROL BOX (RECESSED MOUNT) 1600T AND 1601T SERIES 4 PRODUCT NO.
PAGE 4
Specification Drawing #19 COMPONENTS ONLY UNASSEMBLED 1600T and 1601T SERIES PRODUCT NO. 4 1600T 1601T 9 9 0 0 0 0 FAUCET TYPE COVER 6 Urinal Valve 114mm (4-1/2") Stainless Steel 6 Urinal Valve 114mm (4-1/2") Stainless Steel Note: Ordered as complete product only. No RI or TR available. 1600T9006 AND 1601T9006 SERIES 6mm (1/4") min. 35mm (1 3/4") max.