Dimensions Guide

Submitted Model No.: _______________________________________________
Specific Features: __________________________________________________
7"
(178 mm)
Face of plasterguard
should be flush with
finish wall line
Supply
BATH MIXING
VALVES
■ Valve Only (1304 Series)
■ Shower Only (1324 Series)
■ Tub/Shower (1348 Series)
■ Single Handle
■ Monitor
®
with Scald-Guard
®
Valve
■ Pressure Balance
■ Temperature Only Controlled
with Handle
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue
models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or
www.deltafaucet.com for finish options and product availability.
8" (203 mm)
min.
18" (457 mm)
max.
COMPLIES WITH:
• ASME A112.18.1 / CSA B125.1
• ASSE 1016
Indicates compliance to
ICC/ANSI A117.1
DSP-B-1304 Rev. D
55 E. 111th Street, Indianapolis, Indiana 46280
350 South Edgeware Road, St. Thomas, ON N5P 4L1
© 2016 Masco Corporation of Indiana
2" (51 mm)
RP38357 Touch-Clean
®
Showerhead
2.0 GPM or 2.5 GPM
2 3/4"
(70 mm)
2 5/8"
(67 mm)
Full Spray
1304 1324 1348
5 1/4"
(133 mm)
RP5836
RP17453
RP17454
0
1
2
3
4
5
0 10 20 30 40 50 60 70 80 90
Pressure (PSI)
Flow (U.
S
.
G
allons Per Minute)
6
0 69 138 207 276 345 414 483 552 621
0
3.8
7.6
11.4
15.1
18.9
22.7
Pressure (kPa)
Flow (Liters Per Minute)
7
26.5
Tub Filler
30.3
34.1
8
9
Showerhead
2.0 GPM
2.5 GPM
STANDARD SPECIFICATIONS:
• Pressure balanced single handle bath mixing valve.
• Requires 1 1/2" (38 mm) wall cavity.
• Back-to-back installation capability.
• Solid brass fabricated body.
• Clear knob handle with red/blue indicators.
• Monitor
®
with Scald-Guard
®
valve. Maintains a
balanced pressure of hot and cold water even when
a valve is turned on or off elsewhere in the system.
• Temperature only controlled with handle.
• Field adjustable to limit handle rotation into hot
water zone.
• 120° maximum handle rotation.
• All parts replaceable from the front of the valve
• Note: Product will be marked with flow rate of
specific showerhead.
WARRANTY
• Lifetime limited warranty on parts (other than
electronic parts and batteries) and finishes:
or, for commercial users, for 5 years from
date of purchase.
• 5 year limited warranty on electronic parts
(other than batteries); or, for commercial
users, for 1 year from the date of purchase.
No warranty is provided on batteries.
C/L Supply
Lines
1/2"
(13 mm)
B
Maximum
Allowable Deviation
3 1/2"
(89 mm)
A
Dimensions A B
I.P.S. or C.W.T. 2 3/8" 5/8"
I.P.S. or C.W.T. with stops 5 5/16" 3/8"
1304/1324/1348
2 12"
(64 mm)
5"
(127 mm)
2 1/2"
(64 mm)
5"
(127 mm)
2 1/2"
(64 mm)
4 3/4"
(121 mm)
2 1/2"
(64 mm)
RP5834
RP19820
RP5833