Measurement Guide

Delta Shower Door
Measurement Guide
Need Additional Assistance with Delta Shower Doors?
Call us at 1.800.964.4850
Visit us at www.deltashowerdoors.com
Email us at [e-mail]
©2021 LHMC, A Masco Company
**Disclaimers
• For ceramic tile application, use the top of the tile
for the maximum door height.
• In older homes the opening at the top is often wider
than the bottom due to an out-of-plumb condition.
• NOTE: All Delta Shower Doors are designed to
accommodate out-of-plumb conditions totaling 3/8”.
RECORD DIMENSIONS BELOW
Opening
Height (A):
Width of
widest point (B):
Width at
narrowest point (B):
A
B
B
Sliding Shower Doors
Choosing the right Shower Door is as easy as 1-2-3. But before you customize your dream door, you need
to make sure you have the correct measurements:
Identify Vertical and Horizontal Openings
Height (A) and Widths (B). Widths (B) measurements are often not the same so
doors can be adjusted up to 3/8".
Vertical Opening
Measure from the top of the tub apron or the top of the threshold up to the top of
the acrylic (or tile) surround wall.
Horizontal Opening
Measure width of opening at the top and the bottom of the enclosure.
Available Sizes:
• 40” Shower
- Opening Requirement for Installation: fits doors with opening between 43-3/8"
minimum – 47-3/8" maximum
- Finished Door Height: 70”
- Minimum Required Clearance Height for Installation: 72”
- Sill/Threshold Depth Requirement for Installation: 2”
- This door does not have a stud placement requirement
• 60" Shower
- Opening Requirement for Installation: fits doors with opening between 50-1/8" minimum
– 59-3/8" maximum
- Finished Door Height: 70”
- Minimum Required Clearance Height for Installation: 72”
- Sill/Threshold Depth Requirement for Installation: 2”
- This door does not have a stud placement requirement
• 60” Tub
- Opening Requirement for Installation: fits doors with opening between 50-1/8" minimum
– 58-3/8" maximum
- Finished Door Height: 58-1/8”
- Minimum Required Clearance Height for Installation: 60-1/8”
- Sill/Threshold Depth Requirement for Installation: 2”
- This door does not have a stud placement requirement
A
B
B
Sliding Tub Doors
NOTE: the height will be different
for shower doors vs. bathtubs.