60233 233SL Remote Control Dual Beam Searchlight 233SL Remote Control Dual Beam Searchlight 233SL Remote Control Dual Beam Searchlight 233SL Remote Control Dual Beam Searchlight 233SL Remote Control Dual Beam Searchlight 233SL Remote Control Dual Beam Searchlight 233SL Remote Control Dual Beam Searchlight
Dual Beam Wireless Remote Control Searchlight • • • • • • • • • • Powerful dual beam halogen bulb configuration giving 225,000 candlepower Patent protected focus mechanism giving true Spot/Flood capability Wireless searchlight control system allowing up to 4 easy to install control stations Infinite motion capabilities due to 8 way touch pad directional control Rugged anodized & painted aluminum housing for total corrosion resistance Continuous rotation capabilities while eliminating slip ring corrosion 70
TTS SEARCHLIGHT FUNCTION AND OPERATION The advantage of the Remote Control is that it allows you to direct the light in the best location for maximum effectiveness. They are an increasingly popular addition on power boats, help. Secondary remote control kits can be bought for most models which allow control from either the flybridge or main helm. 8 Way Controller The 8 way controller allows for easier and faster location of an object due to the ability to move this light in any of the diagonals.
1. MOUNTING THE STAINLESS STEEL BAYONET MOUNTING BRACKET AND DECK SEAL a. b. c. d. Select a location that will allow for clear beam projection. Searchlight base should be mounted on level, flat surface. The mounting template should be used to locate the stainless steel bayonet mounting plate and deck seal supplied. An xx hole for the 12v supply needs to be drilled in the location also highlighted on the mounting template. 4 3/16" mounting holes also need to be drilled for fixing the light to the deck.
ELECTRICAL INSTALLATION It is suggested that the Searchlight and controller (s) be wired together in an independent circuit. Consult the wiring diagram for connections Although Internal Fuses are present it is suggested that external fuses be installed on both the searchlight & the controller (s) Consult the Wiring Table for fuse and wire size.
Exploded View 7 8 3 4 5 1 W Wiring Diagram, Single Control SEC KIT 12 VOLT POWER INPUT LEADS SUPPLIED BY CUSTOMER (16 GA.
8 2 9 Wiring Diagram, Optional Secondary Remote Control CONDARY CONTROL NO. 43670-0004 SECONDARY CONTROL CABLE MUST BE ACQUIRED SEPARATELY (SEE CABLE LISTING) 12 VOLT POWER INPUT LEADS SUPPLIED BY CUSTOMER (16 GA.) STATION SELECTOR PANEL MAIN CONTROL 12 VOLT POWER INPUT LEADS SUPPLIED BY CUSTOMER (16 GA.
Dimensional Drawings DIMENSIONAL DRAWING 8-1/2" (216MM) 8-15/16" (227mm) 6-5/8" (168mm) TROUBLESHOOTING All lights are thoroughly inspected before shipping and are warranted to ope AND WIRE HARNESS CONNECTIONS BEFORE PROCEEDING WITH THI PROBLEM Control lever works in reverse in all directions. Light moves in only three of the possible four directions. Dim light (low voltage) Bulb operates - no light movement or Light moves - bulb does not operate.
60° VERTICAL SWEEP 10-1/8" (257mm) 6-1/4" (159mm) rate within specifications. If light does not operate correctly, CHECK FUSES, S TROUBLESHOOTING. SOLUTION See wiring instructions. A. Check connectors. B. Replace control. C. If problem persists, return light & control for service. A. Check voltage at power source. B. Refer to cable listing for proper wire gage and length. A. Check fuses on front of control. B. Check bulb. installation.
Jabsco, 1 Kondelin Road, Cape Ann Industrial Park, Gloucester, MA 01930 Tel: +1 978 281 0440 Fax: +1 978 283 2619 USA Jabsco, UK Bingley Road, Hoddesdon, Hertfordshire EN11 0BU Tel: +44 (0) 1992 450 145 Fax: +44 (0) 1992 467 132 NHK Jabsco Co Ltd, JAPAN 3-21-10, Shin-Yokohama, Kohoku-ku, Yokohama 222 Tel: +81 (0) 45 475 8906 Fax: +81 (0) 45 475 8908 Jabsco GmbH, Oststraße 28, 22844 Norderstedt Tel: +49 (0) 40 53 53 73 0 Fax: +49 (0) 40 53 53 73 11 GERMANY Jabsco Marine Italia S.r.l.
