User's Manual

Instruction manual to teach a new transmitter’s code to a receiver

The user’s manual applies to the following units:

Trans

mitter

FCC ID: R932039010

IC: 6268A-2039010

Model Number: 2039-010-9

Receive

FCC ID: R932039500

IC: 6268A-2039500

Model Number: 2039-500-9

Product Description

The FreeRein™ wireless control system includes a receiver box with either two or four

outputs

and a transmitter requiring a single CR2032 coin cell. The system is designed for

12-

24volt DC systems only.

1. Physically attach the receiver box*, if not already done.

2. Make sure the power line of the receiver is disconnected.

Press and hold any of the transmitter’s buttons and simultaneously reconnect the

power line of the receiver to the 12V power source.

4. There will be an audible click in the relay if the receiver has learned the new

trans

mitter’s code.**.

5. The device is activated and ready for use.

Refer to the diagram for electrical connections.

*Note:

For optimum performance affix the receiver box as far away from electric noise as

possible.

(Example: Electric motors)

**Note: A receiver can learn the code for and be controlled by up to four different

trans

mitters. (Not controlled simultaneously, however)

PAGE 1
Instruction manual to teach a new transmitter’s code to a receiver The user’s manual applies to the following units: Transmitter FCC ID: R932039010 IC: 6268A-2039010 Model Number: 2039-010-9 Receiver FCC ID: R932039500 IC: 6268A-2039500 Model Number: 2039-500-9 Product Description The FreeRein™ wireless control system includes a receiver box with either two or four outputs and a transmitter requiring a single CR2032 coin cell. The system is designed for 12- 24volt DC systems only. 1.