User's Manual

ManualsBrandsDELTA NETWORKS ManualsElectronicsIndustrial Wi-Fi/LTE CATM module

VCB-5003L6-W User Manual

Industrial WiFi/LTE CATM Module

Rev. 1.0

2019/3/12

Notice:

Delta Networks Inc. reserves the right to change specifications detailed in this document at any time without notice, and assumes no responsibility for any errors

within this document.

This document contains proprietary technical information in which is the property of the Delta Networks inc. and shall not be disclosed to others in whole or in part,

reproduced, copied, or used as the basis for design, manufacturing, or sale of apparatus without written permission of Delta Networks Inc.

Summary of content (8 pages)

PAGE 1
VCB-5003L6-W User Manual Industrial WiFi/LTE CATM Module Rev. 1.0 2019/3/12 Notice: 1. Delta Networks Inc. reserves the right to change specifications detailed in this document at any time without notice, and assumes no responsibility for any errors within this document. 2. This document contains proprietary technical information in which is the property of the Delta Networks inc.
PAGE 2
Table of Content 1. 2. PRODUCT OVERVIEW .............................................................................................................1 1.1. GENERAL DESCRIPTION ............................................................................................................ 3 1.2. FEATURES ....................................................................................................................................... 3 REVISION HISTORY...................................................
PAGE 3
1. Product Overview 1.1. General Description The VCB-5003L6-W is a data collector module which can collect data from other devices via TTL UART serial port and then send out data via WIFI or LTE. This device is built in Realtek RT8195AM which is a highly integrated single-chip low power 802.11n Wireless LAN network controller. The RTL8195AM combines an ARM-Cortex M3 MCU, WLAN MAC, a 1T1R capable WLAN baseband, and RF in a single chip. It provides useful high speed connectivity interfaces, such as USB2.
PAGE 4
2. Revision History Revision 1.0 Date 2019/3/12 By Whom Wronski.
PAGE 5
Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
PAGE 6
valid and the FCC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for reevaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users.
PAGE 7
FCC Statement of WWAN Module According to the definition of mobile and fixed device is described in Part 2.1091(b), this device is a mobile device. And the following conditions must be met: 1. This Modular Approval is limited to OEM installation for mobile and fixed applications only.
PAGE 8
For a host using a certified modular with a standard fixed label, if (1) the module’s FCC ID is not visible when installed in the host, or (2) if the host is marketed so that end users do not have straight forward commonly used methods for access to remove the module so that the FCC ID of the module is visible; then an additional permanent label referring to the enclosed module: “Contains Transmitter Module FCC ID:XMR201707BG96” or “Contains FCC ID: XMR201707BG96” must be used.