NovoPRO User’s Guide 1
1. Safety Information Read and understand all instructions before using this product. If damage is caused by failure to follow the instructions, the warranty does not apply. 1.1 FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
1.2.10 Only use attachments/accessories specified by the manufacturer. 1.2.11 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used , use caution when moving the cart/apparatus combination to avoid injury from tip-over. 1.2.12 Unplug this apparatus during lightning storms or when unused for long period of time. 1.2.13 Refer all servicing to qualified service personnel.
2. Introduction 2.1 Package Contents NovoPRO User’s Guide HDMI Cable IR Remote Controller (IR RC) Power Adapter, Input: AC100 ~ 240V, 50/60Hz, Output: 5.35V/2A 2.2 Product Features A9, 1.6~2.0GHz, RAM 1G , ROM built in 8G EMMC Powered by Android 4.x OS Built in 802.
2.3Remote Controller Note: Button Battery 2025 3V insert with correct polarity (+/-).
2.4 Setup Connection Place NovoPRo on a flat platform near the TV, and make sure nothing block the remote control signal. 2.5 Display when Power Up 2.6.1 After power up, the TV will first show a green robot during loading. When loading is finished, it will go to Home screen. 2.6.2 Home Screen display. 3. Settings Using Navigation (4 directions), OK, EXIT, and Menu keys of Remote Controller to select the options, the option selected will be highlighted and confirmed by pressing OK key.
3.1 WiFi 3.1.1 It will automatically scan ambient WiFi networks when select “ON”. 3.1.2 Connect an available WiFi network. If connect a secured WiFi network, corresponding password will be input firstly. Or fail to connect and need reset password. 3.1.3 Once build up the connection with a certain WiFi network successfully, NovoPRO will connect this WiFi network automatically when restart. Note: If factory reset, the password of WiFi network have to be reset.
3.2 Bluetooth 3.2.1 It will automatically scan ambient Bluetooth networks when select “ON”. 3.2.2 Connect an available Bluetooth network. 3.3.3 Once build up the connection with a certain Bluetooth network successfully, NovoPRO will connect this Bluetooth network automatically when restart. 3.3 Ethernet Connect Box and Router by RJ45 network cable. Press “ ON” in Ethernet setting, it will connect to network automatically.
3.4 Date usage Show data usage information. 3.5 More... 3.5.1 VPN Build and set VPN 3.5.2 Portable hotspot 3.5.2.1 Enable Portable hotspot 3.5.2.
Note: WiFi and hotspot connection can not be applied at same time. Disconnect WiFi and connect Ethernet while using hotspot function. 3.6 Sound 3.5.1 Volumes Increase or decrease sound volumes 3.5.2 Touch Sounds If enable Touch sound, sound will be heard while move remote controller.
3.7 Display 3.6.1 Auto Brightness Auto set brightness to save power 3.6.2 Font size Change the font size of OSD 3.8 Storage Shows the storage used of the OS and SD card.
3.9 Apps List all apps installed. You can choose an application and force to shut down the app, uninstall the app, clear user data, move to SD card and clear cache data. 3.
3.11Location 3.
3.13 Language & input Change OSD language and input method. The default input method is android standard keyboard. If you are using our IR remote control, enter into “Default” option and switch to remote controller input method. 3.14 Backup & reset Back up my data: You can backup your application data, WiFi password and other settings.
You can reset all the settings and apps to factory default. Note: You might want to backup important data before resetting the box. Once you choose to rest to factory default, all data/apps will be deleted. 3.15 Add an account 3.
3.17 Developer options. 3.18 About device.
4. Apps Install & Uninstall On NovoPRO, you can install apps from Android Market over the Internet or other sources, such as other online sources, the internal storage and the USB storage device and SD card that you have mounted onto NovoPRO. You also can manage apps on NovoPRO and SD card, install/uninstall apps, stop running apps, or select other options.
5. Trouble Shooting/FAQ 5.1 No Picture Refer to the TV user manual for how to select the correct video input channel. 5.2 USB Content cannot be read . The format of USB storage device is not supported . The supported memory size is 32G maximum. . Make sure that this player supports these files. 5.3 Remote Controller cannot respond quickly to the pressing of keys Make sure that batteries have enough power. 5.
6. Specification CPU GPU RAM ROM OS A9r4 CPU @ 2.0GHz Mali 450MP4 @500MHz 2G DDR3 8G, EMMC Android 4.x OS USB USB2.0*1 HDMI DC Input SD Slot V1.4 5.35V-2A Max: 32G LAN WiFi RJ45 10/100M Ethernet interface IEEE 802.1 a/b/g/n /ac 2.4G, 5.8G Audio Decoder Video/Picture Decoder Low power MediaCPU with DSP audio processing Supports MP3,AAC,WMA,RM,FLAC,Ogg and programmable with 5.1 down-mixing H.264 HP @L5.1 up to 4K x 2K@30fps H.264 MVC up to 1080P@60fps H.
7. Trademark Notice The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in United States and other countries. 8.