Dell Wyse Management Suite Version 1.
Anmerkungen, Vorsichtshinweise und Warnungen ANMERKUNG: Eine ANMERKUNG macht auf wichtige Informationen aufmerksam, mit denen Sie Ihr Produkt besser einsetzen können. VORSICHT: Ein VORSICHTSHINWEIS macht darauf aufmerksam, dass bei Nichtbefolgung von Anweisungen eine Beschädigung der Hardware oder ein Verlust von Daten droht, und zeigt auf, wie derartige Probleme vermieden werden können.
Inhaltsverzeichnis 1 Einführung......................................................................................................................................................4 Editionen..............................................................................................................................................................................4 2 Erste Schritte mit der Wyse Management Suite............................................................................................
1 Einführung Die Wyse Management Suite ist die Verwaltungslösung der nächsten Generation, mit der Sie Ihre Dell Wyse Thin Clients zentral konfigurieren, überwachen, verwalten und optimieren können. Die neue Suite macht es einfacher, Thin Clients mit hoher Funktionalität und Leistung sowie Bedienungsfreundlichkeit zu implementieren und zu verwalten. Sie bietet außerdem erweiterte Funktionsoptionen, z. B.
2 Erste Schritte mit der Wyse Management Suite Dieser Abschnitt enthält Informationen über die allgemeinen Funktionsmerkmale für den Einstieg als Administrator und das Verwalten von Thin Clients über die Wyse Management Suite Software.
Abmelden Zum Abmelden von der Verwaltungskonsole klicken Sie auf den Link "Konto" in der oberen rechten Ecke der Verwaltungskonsole und klicken Sie dann auf Abmelden. Voraussetzungen für Wyse Management Suite in einer privaten Cloud Tabelle 1. Vorbedingungen Eigenschaften Wyse Management Suite-Server Für 10.000 oder weniger Geräte Betriebssystem Für 50.
3 Installieren von Wyse Management Suite in privater Cloud Eine einfache Installation der Wyse Management Suite besteht aus den folgenden Komponenten: • Wyse Management Suite-Server (umfasst Repository für Anwendung und Betriebssystemimages). • Optional – Zusätzliche Wyse Management Suite-Repository-Server (Repository-Server (Repositorys für zusätzliche Images, Anwendungen und AD-Authentifizierung) • Optional – HTTPS-Zertifikat von einer Zertifizierungsstelle wie www.geotrust.com/.
Abbildung 1. Willkommen-Bildschirm 3 Wählen Sie auf der Seite Setup-Typ die gewünschten Komponenten aus, die Sie aktualisieren möchten, und klicken Sie auf Weiter. Die verfügbaren Optionen sind: • Wyse Management Suite – Es gibt zwei Setup-Typen, die für Wyse Management Suite Komponenten verfügbar sind. – Typisch – erfordert minimale Benutzerinteraktion und installiert eingebettete Datenbanken. – Benutzerdefiniert – erfordert maximale Benutzerinteraktion und wird für fortgeschrittene Benutzer empfohlen.
Abbildung 2. Bildschirm „Setup-Typ“ Falls EM SDK bereits bei einer früheren Version von WDM installiert wurde, wird eine Benachrichtigung angezeigt, dass das vorhandene EM SDK bei Bedarf aktualisiert werden sollte. 4 Wählen Sie Typisch als Setup-Typ aus. Geben Sie die neuen Datenbank-Anmeldeinformationen für die eingebetteten Datenbanken an. Geben Sie darüber hinaus auch die neuen Administrator-Anmeldeinformationen ein und klicken Sie auf Weiter.
Abbildung 3. Anmeldeinformationen 5 Auf der Seite Konfiguration konfigurieren Sie den freigegebenen Ordner sowie die Zugangsberechtigungen für die CIFS-Benutzer. Die verfügbaren Optionen sind: • Verwenden eines vorhandenen Benutzers – Wählen Sie diese Option aus, um die Anmeldeinformationen für den vorhandenen Benutzer zu validieren. • Einen neuen Benutzer erstellen – Wählen Sie diese Option aus und geben Sie die Anmeldeinformationen für einen neuen Benutzer ein. Abbildung 4.
ANMERKUNG: Wenn die Teradici EM SDK Option auf der Setup-Typ Seite aktiviert ist, können Sie den Port für den Teradici-Server auf der Seite Konfiguration konfigurieren. Abbildung 5. CIFS-Benutzeranmeldeinformationen 6 Wählen Sie einen Pfad aus, um die Software zu installieren, einen Pfad zum Installieren des lokalen Mandanten-Datei-Repositorys und klicken Sie dann auf Weiter. Der Standardpfad des Zielordners für die Installation der Software ist C:\Program Files\DELL\WMS. Abbildung 6.
Abbildung 7. Zusammenfassung Die Seite Vorinstallations-Zusammenfassung wird angezeigt. 8 Klicken Sie auf Weiter, um die Software zu installieren. Das Installationsprogramm benötigt etwa 4–5 Minuten, um die Installation abzuschließen. Es kann jedoch länger dauern, wenn abhängige Komponenten, wie VC-Runtime, nicht auf dem System installiert sind. 9 Klicken Sie zum Öffnen der Wyse Management Suite-Webkonsole auf Starten. 10 Klicken Sie auf der Webkonsole auf Erste Schritte. Abbildung 8.
• Wenn Sie den Lizenztyp als Standard auswählen und dann auf Weiter klicken, um mit der Standard Wyse Management Suite Installation fortzufahren. • Wenn Sie als Lizenztyp Pro, auswählen, müssen Sie eine gültige Wyse Management Suite-Lizenz importieren. Importieren Sie die Wyse Management Suite-Lizenz, indem Sie die angeforderten Informationen zum Lizenzimport angeben, wenn Ihr Server über eine Internetverbindung verfügt.
Abbildung 11. Portalverwaltung c Geben Sie die Anzahl der Thin Client Plätze an. d Klicken Sie auf Exportieren. ANMERKUNG: Wählen Sie zum Exportieren der Lizenz WMS 1.2, WMS 1.1 oder WMS 1.0 aus der Dropdownliste aus. Die Seite "Zusammenfassung" zeigt die Details der Lizenz an, sobald die Lizenz erfolgreich importiert wurde. 12 Geben Sie Ihre SMTP-Serverinformationen ein und klicken Sie dann auf Speichern.
Abbildung 12. E-Mail-Warnung ANMERKUNG: Sie müssen gültige SMTP-Serverinformationen für den Empfang von E-Mail-Benachrichtigungen von der Wyse Management Suite eingeben. 13 Importieren Sie Ihr SSL-Zertifikat, um die Kommunikation mit dem Wyse Management Suite-Server sicherzustellen. Geben Sie das öffentliche, private und Apache-Zertifikat ein und klicken Sie auf die Schaltfläche Importieren.
Abbildung 13. Schlüssel- oder Zertifkatswertpaar Abbildung 14. PKCS-12 14 Klicken Sie auf Weiter. 15 Klicken Sie auf Bei WMS anmelden. Die Anmeldeseite Dell Management Portal wird angezeigt.
Abbildung 15. Anmeldeseite Abbildung 16.
ANMERKUNG: Lizenzen können über die Seite Portalverwaltung zu einem späteren Zeitpunkt aktualisiert oder erweitert werden.
funktionalen Gruppen organisieren, zum Beispiel nach Marketing, Vertrieb und Entwicklung oder basierend auf der Standorthierarchie, z. B. Land, Bundesland und Stadt. ANMERKUNG: In der Pro-Edition können Systemadministratoren Regeln hinzufügen, um Gruppen zu erstellen. Sie können auch Geräte zu einer vorhandenen Gruppe zuordnen, je nach Gerätattributen wie Subnetz, Zeitzone und Standort.
Diese Seite ermöglicht außerdem den Administratoren das Einstellen von Konfigurationsparametern, die sich speziell auf das Gerät beziehen, indem sie die Schaltfläche Geräteausnahmen aktiviert. Parameter, die in diesem Abschnitt konfiguriert sind, überschreiben jeden Parameter, der auf Gruppen- und/oder globaler Ebene konfiguriert wurde. Berichte – Administratoren können vordefinierte Berichte auf der Grundlage der voreingestellten Filter erstellen und aufrufen.
Für die Wyse Management Suite auf einer privaten Cloud mit selbstsignierten Zertifikaten müssen die Thin Clients die folgenden Versionen von Wyse Geräte-Agenten oder die Firmware für die sichere Kommunikation installiert haben: • Windows Embedded Systems – 13.0 oder spätere Versionen • Thin Linux – 2.0.24 oder spätere Versionen • ThinOS – 8.4 Firmware oder spätere Versionen • Sie können ein Gerät mit einer älteren Agentenversion über HTTP-URL anstatt HTTPS registrieren.
• Private Cloud – Wählen Sie das Kontrollkästchen CA-Validierung aktivieren aus, wenn Sie Zertifikate von einer bekannten Zertifizierungsstelle in Ihren Wyse Management Suite-Server importiert haben. ANMERKUNG: Nehmen Sie an der Pro-Cloud-Version von Wyse Management Suite in den USA keine Änderungen an den Standarddetails des WMS-Servers und MQTT-Servers vor. Verwenden Sie für die Pro-Cloud-Version von Wyse Management Suite in Europa Folgendes: 7 • CCM-Server – eu1.wysemanagementsuite.
CAValidation=no Weitere Informationen finden Sie im neuesten Dell Wyse ThinOS INI-Handbuch unter support.dell.com. ANMERKUNG: • Bei ThinOS 8.3 (ThinOS Lite 2.3 ) und neueren Versionen ermöglicht Ihnen ein WDA-Dienstpriorität-Befehl die Angabe eines Verwaltungsprotokolls. Dieser Befehl wird zur Ermittlung des Verwaltungsservers verwendet. • Die CCM-Tags für ThinOS Versionen 8.3, 8.4 und 8.5 sind unterschiedlich.
Options-Tag Beschreibung Name – GroupToken Dieser Tag ist erforderlich, um ThinOS-Geräte in der Wyse Management Suite in einer öffentlichen oder privaten Cloud zu registrieren. Datentyp – Zeichenfolge Code – 199 Beschreibung – Gruppentoken Dieser Tag ist optional zum Registrieren des Windows Embedded Standard oder von ThinLinux-Geräten in der Wyse Management Suite in einer privaten Cloud.
URL/Tag Beschreibung Eintragsname –_WMS_GROUPTOKEN Dieser Datensatz ist erforderlich, um ThinOS-Geräte in der Wyse Management Suite in einer öffentlichen oder privaten Cloud zu registrieren. Eintrags-FQDN –_WMS_GROUPTOKEN._tcp. Eintragstyp – TEXT Dieser Datensatz ist optional zum Registrieren des Windows Embedded Standard oder von ThinLinux-Geräten in der Wyse Management Suite in einer privaten Cloud.
4 Bereitstellen von Anwendungen auf Thin Clients Die Standardanwendungsrichtlinie ermöglicht die Installation eines einzigen Anwendungspakets und erfordert einen Neustart vor und nach der Installation jeder Anwendung. Mithilfe der erweiterten Anwendungsrichtlinie können Sie mehrere Anwendungspakete mit nur zwei Neustarts installieren.
Abbildung 18. Standard-App-Richtlinie hinzufügen a Wählen Sie Richtlinienname, Gruppe, Task, Gerätetyp und TC-Anwendung aus. b Um diese Richtlinie für ein bestimmtes Betriebssystem oder eine Plattform bereitzustellen, wählen Sie entweder OSSubtypfilter oder Plattformfilter aus. Zeitüberschreitung zeigt eine Meldung auf dem Client an, die Ihnen vor der Installation Zeit zum Speichern der Änderungen verschafft.
c Um diese Richtlinie automatisch auf einem Gerät anzuwenden, das in der Wyse Management Suite registriert ist, wählen Sie Richtlinie auf neue Geräte anwenden aus der Dropdownliste Richtlinie automatisch anwenden aus. ANMERKUNG: 6 7 • Die App-Richtlinie wird angewendet, wenn ein beliebiges Gerät in die definierte Gruppe verschoben oder direkt in der Gruppe registriert wird.
Abbildung 19. App-Richtlinienjob 9 Klicken Sie zum Erstellen eines Jobs auf Vorschau und Zeitpläne werden auf der nächsten Seite angezeigt. 10 Sie können den Status des Jobs durch Navigation zur Seite Jobs überprüfen.
5 Deinstallieren der Wyse Management Suite So deinstallieren Sie die Wyse Management Suite: 1 Doppelklicken Sie auf das Symbol WMS. Der Deinstallationsassistent wird gestartet und der Bildschirm Wyse Management Suite-Deinstallationsprogramm wird angezeigt. 2 Klicken Sie auf Weiter. Standardmäßig ist die Optionsschaltfläche Entfernen ausgewählt, die alle Installationskomponenten der Wyse Management Suite deinstalliert.
6 Beheben von Fehlern in der Wyse Management Suite Dieser Abschnitt enthält Informationen zum Beheben von Funktionsstörungen der Wyse Management Suite. Probleme mit dem Zugriff auf die Wyse Management Suite-Webkonsole • Problem: Beim Versuch zum Herstellen einer Verbindung mit der Wyse Management Suite-Konsole, wird die Authentifizierungs-GUI nicht angezeigt und eine HTTP-Status-404-Seite wird angezeigt.
Problemumgehung: – Stellen Sie sicher, dass Port 443 und Port 1883 offen sind. – Überprüfen Sie die Internetverbindung und testen Sie, ob Sie über den Browser auf die Wyse Management-Webanwendung zugreifen können. – Wenn die automatische Ermittlung aktiviert ist, überprüfen Sie, ob DHCP- oder DNS-SRV-Einträge korrekt konfiguriert sind. Prüfen Sie auch die Server-URL und die Gruppentoken. – Überprüfen Sie, ob Sie das Gerät manuell registrieren können.
A Remote-Datenbank Eine Remote- oder Cloud-Datenbank (DB) ist eine Datenbank, die für eine virtualisierte Umgebung erstellt wurde, zum Beispiel für eine Hybrid Cloud, eine öffentliche Cloud oder eine private Cloud. In der Wyse Management Suite können Sie entweder die Mongo-Datenbank (MongoDB) oder die Maria-Datenbank (MariaDB) bzw. beide Datenbänke basierend auf Ihren Anforderungen konfigurieren.
pwd:"PASSWORD", roles:[{role:"userAdminAnyDatabase",db:"admin"}, {role:"dbAdminAnyDatabase",db:"admin"}, {role:"readWriteAnyDatabase",db:"admin"}, {role:"dbOwner",db:"stratus"}] } ) 12 Führen Sie zum Wechseln zur Stratus-Datenbank den folgenden Befehl aus: use stratus; 13 Führen Sie zum Stoppen der MongoDB-Dienste den folgenden Befehl aus: net stop mongoDB 14 Fügen Sie eine Authentifizierungsberechtigung für die Administrator-DB hinzu. Ändern Sie die mongod.
B Benutzerdefinierte Installation Bei der benutzerdefinierten Installation können Sie zum Einrichten der Wyse Management Suite eine Datenbank auswählen. Sie müssen außerdem die grundlegenden technischen Praxiskenntnisse zur Wyse Management Suite besitzen. Dell empfiehlt die benutzerdefinierte Installation nur fortgeschrittenen Benutzern. 1 Wählen Sie als Setup-Typ Benutzerdefiniert aus und klicken Sie auf Weiter. Abbildung 20. Setup-Typ Die Seite Mongo-Datenbankserver wird angezeigt.
Abbildung 21. Integrierter Mongo-Datenbankserver • Wenn Externe MongoDB ausgewählt wurde, geben Sie den Benutzernamen, das Kennwort, die Datenbankserverdetails und die Portdetails ein und klicken Sie auf Weiter. ANMERKUNG: Das Portfeld generiert den Standardport, der geändert werden kann. Abbildung 22. Externe MongoDB Die Seite MariaDB-Datenbankserver wird angezeigt.
3 Wählen Sie entweder Eingebettete MariaDB oder Externe MariaDB als MariaDB-Datenbankserver aus. • Wenn Eingebettete MariaDB ausgewählt wurde, geben Sie den Benutzernamen und das Kennwort ein und klicken Sie auf Weiter. Abbildung 23. Integrierte MariaDB • Wenn Externe MariaDB ausgewählt wurde, geben Sie den Benutzernamen, das Kennwort, die Datenbankserverdetails und die Portdetails ein und klicken Sie auf Weiter. Das Portfeld generiert den Standardport, der geändert werden kann. Abbildung 24.
4 Die Seite Port wird angezeigt, die es Ihnen erlaubt, die Ports für die folgenden Datenbanken anzupassen: • Apache Tomcat • MySQL-Datenbank • Mongo-Datenbank • MQTT v3.1 Broker • Memcached Abbildung 25. Portauswahl ANMERKUNG: Die Wyse Management Suite verwendet die Maria-Datenbank und Mongo-Datenbank für Folgendes: Maria Datenbank – Relationale Datenbank für Daten, die eine klar definierte Struktur und Normalisierung erfordern. Mongo Datenbank – No-SQL-Datenbank für Leistung und Skalierbarkeit.
C Wyse Management Suite-Funktionsmatrix Die folgende Tabelle enthält Informationen über die unterstützten Funktionen für jeden Abonnementtyp: Tabelle 4. Funktionen im Überblick für jeden Abonnementtyp Funktionen Wyse Management Suite Standard Wyse Management Suite Pro – private Cloud Wyse Management Suite Pro – Cloud Edition Hochgradig skalierbare Lösung zur Verwaltung von Thin Clients Bis zu 10.000 Geräte frei machen 50.
Funktionen Wyse Management Suite Standard Wyse Management Suite Pro – private Cloud Wyse Management Suite Pro – Cloud Edition Bundle-Anwendungen zur Vereinfachung der Bereitstellung und zum Minimieren von Neustarts Nicht unterstützt Unterstützt Unterstützt Delegierte Verwaltung Nicht unterstützt Unterstützt Unterstützt Dynamische Gruppenerstellung und Zuweisung basierend auf Geräte-Attributen Nicht unterstützt Unterstützt Unterstützt Zweifaktor-Authentifizierung Unterstützt Unterstützt Un
D Unterstützte Thin Clients auf der Wyse Management Suite Tabelle 5. Unterstützte Thin Clients Betriebssystem Gerätetyp Build-Nummer Linux Wyse 5010 Thin Client 11.3.106 Wyse 7010 Thin Client WDA Version 2.0.11-00.1 und höher Wyse 5020 Thin Client Plattform-Dienstprogramm Version 1.0.3-0.1 und höher Wyse 7020 Thin Client ThinLinux Wyse 5020 Thin Client Für Wyse 3040 Thin Client Wyse 5060 Thin Client 1.0.7.1 und anderen Plattformen-1.0.7 Wyse 7020 Thin Client WDA Version 2.2.10-00.
Betriebssystem Gerätetyp Build-Nummer Windows Embedded Standard 7P (WES7P) Wyse 5010 Thin Client 7065, 7066, 7067 Wyse 7010 Thin Client WDA Version 14.2.0.x und höher Wyse 5020 Thin Client Merlin Version 3.7.7 und höher Wyse 7020 Thin Client Wyse 7010 Extended Thin Client Wyse 7040 Thin Client 7065 WDA Version 14.2.0.x und höher Merlin Version 3.7.7 und höher Latitude 3460 mobiler Thin Client 7065 WDA Version 14.2.0.x und höher Merlin Version 3.7.
Betriebssystem Gerätetyp Build-Nummer Wyse 7010 Thin Client Wyse 3030 LT Thin Client Wyse 5060 Thin Client Wyse 3040 Thin Client Wyse 5070 Thin Client Wyse 5070 Extended Thin Client Unterstützte Thin Clients auf der Wyse Management Suite 43
E Zugriff auf Datei-Repository Datei-Repositorys sind Orte, an denen Dateien gespeichert organisiert werden. Die Wyse Management Suite verfügt über zwei Arten von Repositorys: • Lokales Repository – Während der Installation der Wyse Management Suite in einer privaten Cloud geben Sie den Pfad zum lokalen Repository in das Wyse Management Suite-Installationsprogramm ein. Nach der Installation, gehen Sie zu Portaladministrator > DateiRepository und wählen Sie das lokale Repository aus.
F Erstellen und Konfigurieren von DHCP-OptionsTags Zum Erstellen eines DHCP-Option-Tags gehen Sie wie folgt vor: 1 Öffnen Sie den Server-Manager. 2 Gehen Sie zu Tools und klicken Sie auf DHCP-Option. 3 Gehen Sie zu FQDN > IPv4 und klicken Sie mit der rechten Maustaste auf IPv4. Abbildung 26. DHCP 4 Klicken Sie auf Vordefinierte Optionen festlegen. Das Fenster Vordefinierte Optionen und Werte wird angezeigt. 5 Wählen Sie aus der Dropdownliste Optionsklasse den Wert DHCP-Standardoption aus.
Abbildung 27. Vordefinierte Optionen und Werte 6 Klicken Sie auf Hinzufügen. Das Fenster Optionstyp wird angezeigt. Abbildung 28. Optionstyp Die Optionen müssen entweder zu den Serveroptionen des DHCP-Servers oder den Bereichsoptionen des DHCP-Bereichs hinzugefügt werden. Konfigurieren der DHCP-Option-Tags • Zum Erstellen des Option-Tags 165 Wyse Management Suite Server-URL gehen Sie wie folgt vor: a Geben Sie die folgenden Werte ein und klicken Sie auf OK.
– Code – 165 – Beschreibung – WMS_Server b Geben Sie den folgenden Wert ein und klicken Sie auf OK. Zeichenfolge –WMS FQDN Zum Beispiel WMSServerName.YourDomain.Com:443 Abbildung 29. Option-Tag 165 Wyse Management Suite Server-URL • Zum Erstellen des Option-Tags 166 MQTT-Server-URL gehen Sie wie folgt vor: a Geben Sie die folgenden Werte ein und klicken Sie auf OK.
Abbildung 30. Option-Tag 166 Wyse Management Suite Server-URL • Zum Erstellen des Option-Tags 167 Wyse Management Suite CA-Validation-Server-URL gehen Sie wie folgt vor: a Geben Sie die folgenden Werte ein und klicken Sie auf OK. – Name – CA-Validation – Datentyp – Zeichenfolge – Code – 167 – Name – CA-Validation b Geben Sie die folgenden Werte ein und klicken Sie auf OK.
Abbildung 31. Option-Tag 167 Wyse Management Suite Server-URL • Zum Erstellen des Option-Tags 199 Wyse Management Suite Gruppentoken-Server-URL gehen Sie wie folgt vor: a Geben Sie die folgenden Werte ein und klicken Sie auf OK. – Name – Gruppentoken – Datentyp – Zeichenfolge – Code – 199 – Beschreibung – Gruppentoken b Geben Sie die folgenden Werte ein und klicken Sie auf OK.
Abbildung 32.
G Erstellen und Konfigurieren von DNS-SRVEinträgen Um einen DNS-SRV-Eintrag zu erstellen, gehen Sie wie folgt vor: 1 Öffnen Sie den Server-Manager. 2 Gehen Sie zu Tools und klicken Sie auf DNS-Option. 3 Gehen Sie zu DNS- > DNS-Server-Host-Name > Forward-Lookupzonen > Domain > _tcp und klicken Sie mit der rechten Maustaste auf die _tcp-Option. Abbildung 33. DNS-Manager 4 Klicken Sie auf Andere neue Datensätze. Das Fenster Ressourcendatensatztyp wird angezeigt.
Abbildung 34. Ressourcendatensatztyp a 52 Zum Erstellen eines Serverdatensatzes für die Wyse Management Suite, geben Sie die folgenden Informationen ein und klicken Sie auf OK.
Abbildung 35. _WMS_MGMT Service b Zum Erstellen eines Serverdatensatzes für MQTT geben Sie die folgenden Werte ein und klicken Sie auf OK. • Service-_WMS_MQTT • Protokoll–_tcp • Portnummer–1883.
Abbildung 36. _WMS_MQTT Service 6 Gehen Sie zu DNS > DNS-Server-Host-Name > Forward-Lookupzonen > Domain und klicken Sie mit der rechten Maustaste auf die Domain. 7 Klicken Sie auf Andere neue Datensätze.
Abbildung 37. Ressourcendatensatztyp a Zum Erstellen eines Gruppentokens für die Wyse Management Suite, geben Sie die folgenden Werte ein und klicken Sie auf OK.
Abbildung 38. _WMS_GROUPTOKEN Datensatzname b 56 Zum Erstellen eines CA-Validierungsdatensatzes für die Wyse Management Suite geben Sie die folgenden Werte ein und klicken Sie auf OK.
Abbildung 39.
H Erstellen und Bereitstellen einer erweiterten Anwendungsrichtlinie auf Thin Clients Zum Bereitstellen einer erweiterten Anwendungsrichtlinie auf Thin Clients gehen Sie folgendermaßen vor: 1 Kopieren Sie die Anwendung und die Skripte vor/nach der Installation (falls erforderlich) zur Bereitstellung auf den Thin Clients im Ordner thinClientApps im lokalen Repository oder dem Wyse Management Suite-Repository.
d Wenn Sie diese Richtlinie auf einem bestimmten Betriebssystem oder einer bestimmten Plattform bereitstellen möchten, wählen Sie entweder OS-Subtypfilter oder Plattformfilter. e Die Zeitüberschreitung zeigt eine Meldung auf dem Client an, die Ihnen Zeit zum Speichern der Änderungen verschafft, bevor die Installation beginnt. Geben Sie die Anzahl der Minuten an, die das Meldungsdialogfeld auf dem Client angezeigt werden soll.
c Gemäß ausgewählter Zeitzone – Der Server erstellt einen Job, der an dem Datum und zu der Uhrzeit der angegebenen Zeitzone ausgeführt wird. 9 Klicken Sie auf Vorschau und "Zeitplan festlegen" auf der nächsten Seite, um den Job zu erstellen. 10 Sie können den Status des Jobs auf der Seite Jobs überprüfen.
I Windows Embedded Standard-Gerät manuell registrieren Windows Embedded Standard-Geräte können manuell durch Starten des WDA-UI Symbols in der Taskleiste registriert werden. 1 Wählen Sie Wyse Management Suite-WMS als Verwaltungsserver aus. 2 Geben Sie einen geeigneten Mandanten und Gruppennamen ein. Wenn dieses Feld leer gelassen wird, werden die Geräte in einer nicht verwalteten Gruppe registriert. (Optional) 3 Klicken Sie auf Registrieren. Abbildung 42.
J Linux Gerät manuell registrieren Linux Geräte können manuell durch Starten des WDA-UI Symbols in den Systemeinstellungen registriert werden. 1 Geben Sie die WMS-Server-Informationen ein. 2 Geben Sie einen geeigneten Mandanten und Gruppennamen ein. Wenn dieses Feld leer gelassen wird, werden die Geräte in einer nicht verwalteten Gruppe registriert. (Optional) 3 Klicken Sie auf Registrieren. Das Gerät wird in der Wyse Management Suite-Konsole registriert. Abbildung 43.
K Begriffe und Definitionen In der folgenden Tabelle sind die Begriffe aufgeführt, die in diesem Dokument verwendet werden sowie deren Definitionen: Tabelle 6. Begriffe und Definitionen Terminologie Definition Private Cloud Wyse Management Suite-Server, der in der Cloud installiert ist, die für das Datencenter Ihrer Organisation privat ist. WDA Wyse Device Agent, der im Gerät sitzt und als Agent für die Kommunikation zwischen Server und Client dient.