Microsoft Windows 10 IoT Enterprise for Dell Wyse Thin Clients Maintenance Release 3 Release Notes Current Version: 0A62 Release Date: 11-02-2017 Previous Version: Wyse 7020 thin client\Wyse 7020 accelerated graphics thin client\Wyse 5020 thin client– Build 0A38 Copyright © 2017 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners.
Contents Release type and definition ................................................................................................. 3 Current version ................................................................................................................. 3 Previous version ............................................................................................................... 3 Enhanced features ..............................................................................................
Release type and definition This release note contains the following information for Microsoft Windows 10 IoT Enterprise maintenance release: Table 1. Release detail and specification Release detail Specification Operating system Windows 10 IoT Enterprise Product version 11.
write-protected volume appear to function as a writeable volume. Write Filters can also reduce the wear on solid state drives by eliminating or reducing the number of writes that are written to the disk. CAUTION: Dell recommends using thin clients running Windows 10 IoT enterprise in Write Filter enable state unless there is need for support or maintenance activity. Windows 10 IoT Enterprise contains only Unified Write Filter (UWF). UWF cache size is 1024 MB.
Event Viewer log details Event Viewer log stores data and allows you to enable or disable the Event log saving when the Unified Write Filter is on. This feature also allows you to collect event logs for debugging or analysis purpose. Internet Explorer cache size on the disk By default, the Internet Explorer cache size is set to 100 MB. Temporary Internet files, cache, history locations are set to drive C instead of drive Z.
Table 3. Premium codecs Codec Description H.265 High Efficiency Video Coding (HEVC) or H.265 doubles the data compression ratio at the same level of video quality, or improves video quality at the same bit rate. It supports resolutions up to 8192 × 4320, including 8 K UHD. This codec is supported only if the required hardware is present. H.263 H.
• Power Shell script execution environment must be available. • Custom Sysprep and Configuration Sysprep (SCCM) scripts must be available. • Host Name calculation feature must be available. • If the flash size or HDD size is more than 32 GB, reduce it to less than 32 GB for a better custom sysperp process. NOTE: You cannot access the thin client if you terminate the Sysprep process. Make sure that the device is ready before you use the Sysprep tool.
4. In the Configurations section, select Custom configuration. 5. In the Host Name calculation section, enable or disable hostname calculation. 6. In the Configure Domain Options section, enter the appropriate values, and click Save Credentials. 7. Click OK on confirmation dialog box. 8. Select Enable Local Account Credentials changes option if you want the changes made to the credentials to take effect. 9. Click NEXT. The Credentials Manager page is displayed.
10. On the Credential Manager page, select the user for which credentials have to be changed and provide the login credentials. 11. Click Save. 12. Click Apply to save the changes. This process may take 5–10 minutes to complete. The device turns off after the Sysprep process is complete. NOTE: If SFC scan is enabled, the process may take 45-60 minutes to complete. Config Sysprep Running the Config Sysprep tool To run the Config Sysprep tool, do the following: 1. Go to C:\Windows\Setup. 2.
3. Click NEXT. The Configuration screen is displayed. 4. In the Configurations section, select SCCM configuration. 5. In the Host Name calculation section, enable or disable hostname calculation. NOTE: The Configure Domain Option and Configure local account credentials field are grayed out. 6. Click Apply to save the changes. After the completion of SCCM Config Sysprep, the HAgent service ends. You can now perform the pull operation using SCCM.
• You must manually enable the Boot from USB option in BIOS. • Native PXE imaging is not supported as the default boot mode is set to UEFI in this build. • The Lockdown Manager is not embedded in this build and the following are the lockdown features: o USB filter o Keyboard filter o Gesture filter Supported platforms Table 4.
Sl.No. Defect Description 3 You can share the file with another user even when Bluetooth is disabled in thin client. 4 When you use SCCM client to pull the image, the system fails to boot. This is a known issue on Windows 10. 5 When you move an application to other location in the start screen, the application gets disabled. 6 The second monitor display powers off when you toggle from extended display to duplicate display. 7 Unknown IP as subnet is observed during PAD imaging.
WSI/Wizard Compatibility WSI 5.0.4 WDM Compatibility WDM 5.7.2 BA version 3.5.4 USB Imaging Tool 2.1.4 Table 8. Platform-specific build details Wyse 7020 thin client, Wyse 7020 accelerated graphics thin client, and Wyse 5020 thin client Product Version 11.03 Build Number 0A62 Build WSI Package Name GOG0_0A62_32GB.exe Build Size (Bytes) 16,721,086,546 bytes Localization En-US, ja-JP, fr-FR BIOS details Version 2.0F Build File Name 20F.
Drivers/Files Version Wireless Adapter Intel® Dual Band Wireless-AC 7260 Version 18.33.6.2 Bluetooth Intel® Wireless Bluetooth® Version 19.40.1.1 Intel® Wireless Bluetooth® Version 19.50.1 (Program and features) TPM Supported Wyseramdisk.sys (Wyse RAM Disk driver) 5.0.2183.5 USB 3.0 AMD USB 3. 0 eXtensible Host Controller 1.0 (Microsoft) Version 10.0.10240.16461 Flash.sys 1.0.7.7 Dell CAPS Lock indicator application Driver 2.1.10.0604 Dell Open printer driver 1.91.7882.
Applications/Features/Files Version .NET Framework 4.6 WDA 13.0.2.21 Bit locker with TPM Supported Windows Multi touch Supported Windows Defender with latest definition Virus & Spyware definition updates 1.249.278.0 Microsoft Management Console Management Console 3.0 Version 10.0 (Build 10240) Microsoft Silverlight 5.1.50907.
KB Number Description KB3081438 Update for Microsoft Windows 10 IoT Enterprise KB3081441 Update for Microsoft Windows 10 IoT Enterprise KB3081444 Security update for Microsoft Windows 10 IoT Enterprise KB3081448 Update for Microsoft Windows 10 IoT Enterprise KB3081452 Update for Microsoft Windows 10 IoT Enterprise KB3081455 Security update for Microsoft Windows 10 IoT Enterprise KB3093266 Update for Microsoft Windows 10 IoT Enterprise KB3095020 Update for Microsoft Windows 10 IoT Enterprise
