Install Guide

Table Of Contents

Rev. A01

April 2021

Updating from Windows 10 IoT Enterprise 2016

LTSB to Windows 10 IoT Enterprise 2019 LTSC

Release Notes

Introduction

Release Date: May 2020

Topics:

• Determining the device upgrade options

• Upgrading Pre-licensed Wyse 5070, Wyse 5470, and Wyse 5470 All-in-One thin clients

• Installing the Upgrade Kit using Product Key from Microsoft

Dell Wyse 5070 Thin Clients manufactured before October 3, 2019 and Wyse 5470 and Wyse 5470 All-in-One thin clients

manufactured before May 5, 2020 are licensed for Windows 10 IoT Enterprise 2016 LTSB only. Wyse 5070 Thin Clients

manufactured after October 3, 2019 and Wyse 5470 and Wyse 5470 All-in-One thin clients manufactured before May 5, 2020

are licensed with Windows 10 IoT Enterprise 2019 LTSC even if they are ordered with Windows 10 IoT Enterprise 2016 LTSB.

The upgrade kit enables you to update to Windows 10 IoT Enterprise 2019 LTSC.

There are three ways to upgrade Dell Wyse 5070, Wyse 5470, and Wyse 5470 All-in-One thin clients with Windows 10 IoT

Enterprise 2016 LTSB to Windows 10 IoT Enterprise 2019 LTSC:

● The Dell Wyse 5070, Wyse 5470, and Wyse 5470 All-in-One thin clients are pre-licensed for Windows 10 IoT Enterprise 2019

LTSC. Download the new operating system image from Dell and install.

● Obtain a license from Microsoft for Windows 10 IoT Enterprise 2019 LTSC and use it with the operating system image that is

downloaded from support.dell.com found on the Dell Wyse 5070, Wyse 5470, and Wyse 5470 All-in-One thin clients Drivers

and Downloads section.

● Purchase the Dell Wyse 5070, Wyse 5470, and Wyse 5470 All-in-One thin clients Windows 10 IoT Enterprise 2016 LTSB to

2019 LTSC upgrade kit—SKU 634-BWPK. Please contact your local sales representative and request the upgrade kit—SKU

634-BWPK.

NOTE:

If the license is obtained from Microsoft, download the operating system from support.dell.com and click Drivers and

Downloads. Using this method, the purchase of the upgrade kit—SKU 634-BWPK is not necessary, unless Internet access is

unavailable.

NOTE: Microsoft designations for operating system releases include Redstone 1 for Windows 10 IoT Enterprise 2016 LTSB

and Redstone 5 for Windows 10 IoT Enterprise 2019 LTSC. You may find these designations and product names that are

used interchangeably in Dell documentation.

Determining the device upgrade options

1. Go to support.dell.com.

2. Enter the Service Tag of the thin client.

3. Click Search.

4. Click View System Configuration .

5. Look for component number 34VT1 or WRKNY.

Introduction

PAGE 1
Rev.
PAGE 2
● If the component is found, the thin client is prelicensed for the Windows 10 IoT Enterprise 2019 LTSC operating system and the upgrade kit is not required. You can upgrade to Windows 10 IoT Enterprise using the Upgrading Pre-licensed Dell Wyse 5070, Wyse 5470, and Wyse 5470 All-in-One thin clients procedure. ● If the component is not found, go to step 6. 6. Look for component number 85JCX or 9V1R5.
PAGE 3
6. Enter the product key. 7. Click Next. 8. Click Close. 9. Enable write filter. The thin client reboots. 10. Attach COA label with 25-character Product Key to the Wyse thin client. Purchasing the Upgrade Kit Once it is determined that the device is not licensed for Windows 10 IoT Enterprise 2019 LTSC upgrade, purchase the Dell Wyse 5070, Wyse 5470, and Wyse 5470 All-in-One thin clients Windows 10 IoT Enterprise 2016 LTSB to 2019 LTSC upgrade kit (SKU 634-BWPK).
PAGE 4
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2020 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.