Windows 10 Enterprise 2019 LTSC for Dell Wyse Thin Clients Release Notes December 2020 Rev.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2020 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents Chapter 1: Release summary..........................................................................................................5 Priority and recommendations..........................................................................................................................................5 Chapter 2: Compatibility............................................................................................................... 6 Build details..................................................
Hardware support information....................................................................................................................................... 23 Test Environment.............................................................................................................................................................. 23 Used and free space details............................................................................................................................................
1 Release summary This release note contains information about the Windows 10 IoT Enterprise unified build 10.04.07.09.20.00 that runs on Wyse 5070 Thin Client, Wyse 5470 Thin Client, and Wyse 5470 All-in-One Thin Client. The operating system is based on Windows 10 Enterprise 2019 LTSC, also known as Redstone 5 (RS5). This build can be pushed on thin clients with 32 GB eMMC, 64 GB SSD, 128 GB SSD and 256 GB SSD and higher with 4 GB RAM and 8 GB RAM.
2 Compatibility Build details Table 1. Build details of Wyse 5070 Thin Client Release detail Specification Platform Wyse 5070 Thin Client Product Windows 10 IoT Enterprise 2019 LTSC Build version/Kernal version 10.0 Build number 10.04.06.11.20.00 BIOS version 1.9.0 Table 2. Build details of Wyse 5470 Thin Client Release detail Specification Platform Wyse 5470 Thin Client Product Windows 10 IoT Enterprise 2019 LTSC Build version/Kernal version 10.0 Build number 10.04.08.11.20.
● ● ● ● ● ● ● ● ● ● ● ● ● ● French Canada (fr-CA) Italian (it-IT) Spanish (es-ES) Japanese (ja-JP) Korean (ko-KR) Chinese Simplified (zh-CN) Chinese traditional (zh-TW) Brazilian Portuguese (pt-BR) Dutch Netherlands (nl-NL) Danish Denmark (da-DK) Finnish Finland (fi-FI) Norwegian Norway (nb-NO) Russian Russia (ru-RU) Swedish Sweden (sv-SE) Hardware capability Display settings for Wyse 5070 Thin Client By default, the Display Settings UI is available in both user mode and admin mode.
Table 5. Wyse 5070 Thin Client with Celeron processor Number of Displays Supported display resolution 4K resolution 1 Non- 4K resolution 2 One display Yes Yes Two displays Yes Yes Three displays No 3 Yes 3 1. 4K resolution—3840 x 2160 @ 60 Hz 2. Non-4K resolution—Up to 2560 x 1600 @ 60 Hz 3. VGA port does not support 4K display. However, it supports a display with 1080p screen resolution. Table 6.
Table 8. Ports (continued) Ports DP1 DP2 DP3 VGA USB Type-C Non-4K resolution Yes Yes Yes Yes Yes 1. VGA port does not support 4K display. However, it supports a display with 1080p screen resolution. 2. DP2 and USB Type-C port are mutually exclusive with USB Type-C port taking higher priority. 3. DP3 and VGA port are mutually exclusive with VGA port taking higher priority. Wyse 5070 Extended Thin Client with AMD GPU Table 9.
Figure 1. Ports of Wyse 5070 Extended Thin Client Table 10. Ports Ports DP1 DP2 DP3 VGA USB-C mDP4 3 mDP5 4 DP6 5 Monitor priority 1 2B 6 3B 7 3A 7 2A 6 4 5 6 4K display Yes resolution Yes Yes No 1 Yes Yes Yes Yes Non-4K resolution Yes Yes Yes 2 Yes Yes Yes Yes Yes 1. VGA port does not support 4K display. However, it supports a display with 1080p screen resolution. 2. VGA port supports 1080p screen resolution. 3. mDP4 port refers to the top mDP port of the AMD GPU slot.
● DP1 > USB-C > DP3 > mDP4 > mDP5 > DP6 ● DP1 > DP2 > VGA > mDP4 > mDP5 > DP6 ● DP1> USB-C > VGA > mDP4 > mDP5 > DP6 Audio capability—Audio is supported on all DP ports except DP3.
3 New and enhanced features Wyse Easy Setup Wyse Easy Setup enables administrators to quickly and easily deploy configurations on thin clients. Wyse Easy Setup enables you to: ● Create a dedicated browser-focused client by configuring the Internet Explorer settings. ● Configure multiple broker connections such as Citrix, VMware, and Remote Desktop Protocol (RDP). ● Configure a device to create a dedicated application for a particular line of business.
Install Dell application store using Wyse Management Suite Steps 1. Register the device to Wyse Management Suite server and add the device to respective add-on group. 2. Download the Exportconfig.ps1 /.exe file. 3. Copy Exportconfig.ps1 /.exe file to the Wyse Management Suite server repository. 4. Log in to the Wyse Management Suite server. 5. Go to Portal Administration > File Repository. 6. Check the File Repository and click Sync Files. 7.
1. On client, run the action items until you get the install notification from SCCM server. 2. The installation fails during the first time, and it retries after 10 minutes. The installation is successful during the second time. Quick Start The Quick Start application launches when you boot into a thin client for the first time. This tool displays the software and hardware features of the thin client. It also provides information about the VDI applications, management software, and supported peripherals.
xData Cleanup Manager xData Cleanup Manager (xDCM) version 1.1.0.2 prevents extraneous information from being stored on the local disk. xDCM can be used to automatically clean up directories that are used to temporarily cache the information. A clean-up is triggered on either service startup, user logoff, or system shutdown. It also enables you to configure multilevel logs which are essential for troubleshooting.
Ericom Connect Client Ericom Connect Client maximizes the value of Terminal Servers (RDS), virtual desktops (VDI), Web applications, Cloud services, and legacy host systems. For IT departments of all sizes, PowerTerm Web Connect streamlines the management and utilization of IT resources, and also protects earlier IT investments and improves the end user-experience.
System Center Configuration Manager 2016 server information System Center Configuration Manager (SCCM) is supported for standard deployment of images. User accounts You can log in as an administrator or as a standard user. The following are the login credentials for user and administrator accounts: Table 11.
● C:\Wyse\WDA The following are the default registries excluded from being filtered by UWF: ● ● ● ● ● ● ● HKLM\Software\Wyse\ConfigMgmt HKLM\SYSTEM\CurrentControlSet\Control\WNT\UWFSvc HKLM\SOFTWARE\Microsoft\Windows Defender HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\HomeGroup HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkList HKLM\SYSTEM\WPA HKLM\SYSTEM\CurrentControlSet\Control\WNT\DWCADTool CAUTION: Please follow proper write filter and Windows Page File usage instructions at all times.
● Config Sysprep, see Running the Config Sysprep tool. Prerequisites The following are the pre-requisites to run the Custom Sysprep tool: ● Unified Write Filter must be disabled. ● Logging framework must be available on your thin client. ● Power Shell script execution environment must be available. ● Custom Sysprep and Configuration Sysprep (SCCM) scripts must be available. ● Host Name calculation feature must be available.
Figure 2. Config Master 3. Click Next. The Configuration screen is displayed. Figure 3. Configuration 4. Select Custom configuration in the Configurations section. 5. Enable or disable hostname calculation in the Host Name calculation section. 6. Enter the appropriate values in the Configure Domain options section, and click Save Credentials—optional. 7. Click OK when prompted—optional. 8. Select Enable local account credentials changes—optional. The changes that are made to the credentials are applied.
9. Click Next. The Credential Manager page is displayed. 10. Select the user account, and type the login credentials. 11. Click Save. 12. Click Apply to save the changes. This process takes 5–10 minutes to complete. The device turns off after the Sysprep process is complete. NOTE: You cannot access the thin client if you terminate the Sysprep process. Make sure that the device is ready before you use the Sysprep tool.
Figure 5. Configuration 4. In the Configurations section, select SCCM configuration. 5. In the Host Name calculation section, enable or disable hostname calculation. NOTE: The Configure Domain Option and Configure local account credentials field are grayed out. 6. Click Apply to save the changes. After the completion of SCCM Config Sysprep, the HAgent service ends. You can now perform the pull operation using SCCM.
4 Important notes Hardware support information ● Rich 4K display capability is provided. ● Option for 802.11 a/b/g/n/ac wireless is provided. ● Intel Celeron® J4105 CPU at 1.50 GHz (Economy configuration), Intel Pentium® Silver J5005 at 1.50 GHz (Standard and Extended configuration) is supported. ● Video adapters—DP to DVI, DP to VGA—is supported. ● Dynamic throttling for higher performance is supported. Test Environment Table 12.
Table 13. Additional details Component Version Wyse Management Suite 1.4 and later versions Boot Agent 4.0.5 USB Imaging Tool 1.2.4 Used and free space details Table 14. Used and free space details Platform SSD\eMMC Size Used Space Free Space Wyse 5070 Thin Client 128 GB 14.6 GB 99.2 GB Wyse 5470 All-in-One Thin Client 32 GB 14.6 GB 11.1 GB Wyse 5470 Thin Client 32 GB 14.7 GB 11.7 GB QFEs Table 15.
Table 16. Supported peripherals (continued) Product Category Adapters/ Cables Input Devices Monitors Peripherals Wyse 5070 Thin Client Wyse 5470 All- Wyse 5470 in-One Thin Thin Client Client Plantronics Savi W440M-400 Series convertible wireless headset - DECT 6.0 N/A ✓ ✓ Plantronics Voyager Focus UC B825-M headset for Microsoft Lync N/A ✓ ✓ Dell Adapter - DisplayPort to DVI (Single Link) DANARBC084 - DANARBC084 ✓ N/A N/A Dell Adapter - DisplayPort to HDMI 2.
Table 16.
Table 16.
Table 16. Supported peripherals (continued) Product Category Peripherals Wyse 5070 Thin Client CARD_IDPrime MD 3840 B w/o OTP ✓ ✓ ✓ Card_IDPrimeMD840B_white_PVC ✓ ✓ ✓ CARD_IDPrime MD3811, Mifare EV1 4K&DESFire EV1, 4K _MPH150_New ✓ ✓ ✓ Standard Card _IDPrime NET 510_ white PVC ✓ ✓ ✓ Ybikey Neo 5.
Table 18. Common application, features, and files (continued) Application Version Citrix Workspace 1912 19.12.0.119 Citrix RTME 2.9.0.2330 CAD Map 3.0.6.0 SCCM 5.00.8790.1007(2019) Build Content 1.0.0.8 MUI tool 1.0.0.10 Dell Thin Client App 10.0.0.27 MS Lync VDI 2013 15.0.4420.1017 Custom Sysprep No Version Quick Start No Version Ericom PowerTerm interconnect for thin clients 12.5.1 Ericom connect WebConnect client 7.5.
5 Fixed issues The following are the fixed issues in this release: ● WIN-1334—Fixed the boot loop issue observed in Wyse 5470 All-in-One Thin Clients. ● WIN-1313—Fixed the issue where Wyse Easy Setup 2.0 stops responding when you configure the sleep settings using Wyse Management Suite. ● WIN-1311—Fixed the issue observed after you configure keyboard layout and host name in the Custom Sysprep.
6 Resources and support Accessing documents using the product search 1. Go to www.dell.com/support. 2. In the Enter a Service Tag, Serial Number, Service Request, Model, or Keyword search box, type the product name. For example, Wyse 3040 thin client or Wyse ThinOS. A list of matching products is displayed. 3. Select your product. 4. Click Documentation. Accessing documents using product selector You can also access documents by selecting your product. 1. 2. 3. 4. 5. 6. Go to www.dell.com/support.
7 Contacting Dell Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. To contact Dell for technical support or customer service issues, see www.dell.com/contactdell. If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or the product catalog.
