Windows 10 IoT Enterprise LTSB 2016 for Dell Wyse 5070 Thin Client Release Notes March 2019 Rev.
Contents Chapter 1: .................................................................................................................................... 3 Release type and definition............................................................................................................................................... 3 Release type and definition......................................................................................................................................... 3 What's new.......
1 Release type and definition Software releases are created to correct defects, make enhancements, or add new features. These releases are tested on all current, actively shipping platforms and operating systems, as applicable. This release notes contain details on the supported platforms, any changes in the configuration settings and licensing details as well. The bug fixes along with the workarounds are documented in the release notes.
temporarily by an administrator when required for image upgrades, applying security patches, registry changes and application installation. The write filter should be re-enabled as soon as such tasks are completed. Such instructions further include never enabling the Windows Page File feature during regular use of the thin client.
XML driven PowerShell scripts Customization scripts are ported to the PowerShell scripts, and are based on the XML file input. Log files for customization A log file is created for the customization scripts where you can view the overall script execution. User accounts You can log in as an administrator or as a standard user. The following are the login credentials for user and administrator accounts: Table 2.
● Internet Explorer 11 enhanced protection mode is enabled. ● Internet Explorer cookies and cache are redirected to Z: RAM Disk. ● Cache content is limited to 100 MB. ● Browsing history is cleared when you exit Internet Explorer. USB redirection USB redirection is applicable for all users of the client machine with all the published XenDesktop irrespective of the setting Simplify device connections for me in the XenDesktop connection preferences user interface.
The Sysprep tool is used with other deployment tools to install the Microsoft Windows operating systems with minimal intervention by an administrator. Buildmaster.cmd is the main program that calls other executable files that prepares the thin client for the Windows installation. Buildmaster.cmd is located in the\Windows\Setup on all installations. Sysprep must always be run from the \Windows\Setup and must run on the version of Windows with which it was installed.
Figure 1. Config Master 3. Click Next. The Configuration screen is displayed. Figure 2. Configuration 4. Select Custom configuration in the Configurations section. 5. Enable or disable hostname calculation in the Host Name calculation section. 6. Enter the appropriate values in the Configure Domain options section, and click Save Credentials. 7. Click OK when prompted. 8. Select Enable local account credentials changes. The changes that are made to the credentials are applied.
. Click Next. The Credential Manager page is displayed. Figure 3. Credential Manager 10. Select the user account, and type the login credentials. 11. Click Save. 12. Click Apply to save the changes. This process takes 5–10 minutes to complete. The device turns off after the Sysprep process is complete. NOTE: You cannot access the thin client if you terminate the Sysprep process. Make sure that the device is ready before you use the Sysprep tool.
The Configuration screen is displayed. Figure 5. Configuration 4. In the Configurations section, select SCCM configuration. 5. In the Host Name calculation section, enable or disable hostname calculation. NOTE: The Configure Domain Option and Configure local account credentials field are grayed out. 6. Click Apply to save the changes. After the completion of SCCM Config Sysprep, the HAgent service ends. You can now perform the pull operation using SCCM.
Hardware capability Display settings for Wyse 5070 thin client By default, the Display Settings UI is available in both user mode and admin mode. Any changes to display preferences made through this UI is saved for the user. Table 3. Port preferences Wyse 5070 thin client with Celeron processor ● Optional port can be used as second RJ-45, SFP, VGA, or second serial port. ● If wireless is enabled, the optional port cannot be used as second RJ-45 or SFP.
Table 5. Ports Ports DP1 DP2 VGA USB Type-C Monitor priority 1 2B 2 3 2A 2 4K display resolution Yes Yes No 1 Yes Non-4K resolution Yes Yes Yes 1 Yes 1. VGA port does not support 4K display. However, it supports a display with 1080p screen resolution. 2. DP2 and USB Type-C port are mutually exclusive with USB Type-C port taking higher priority. Wyse 5070 thin client with Pentium processor Table 6.
Table 8. Wyse 5070 Extended thin client with AMD GPU Number of Displays Supported display resolution Three displays 4 Yes Yes Four displays 5 Yes Yes Five displays No 3 Yes Six displays No 3 Yes 1. 4K resolution—3840 x 2160 @ 60 Hz 2. Non-4K resolution—Up to 2560 x 1600 @ 60Hz – Support only up to four monitors with 4K screen resolution @60 Hz. 3. If you connect five or six displays, four monitors will have 4K resolution and other monitors will have a maximum resolution of 2560 x 1600 @ 60 Hz.
Table 9. Ports Ports DP1 DP2 DP3 VGA USB-C mDP4 3 mDP5 4 DP6 5 Monitor priority 1 2B 6 3B 7 3A 7 2A 6 4 5 6 4K display resolution Yes Yes Yes No 1 Yes Yes Yes Yes Non-4K resolution Yes Yes Yes Yes 2 Yes Yes Yes Yes 1. VGA port does not support 4K display. However, it supports a display with 1080p screen resolution. 2. VGA port supports 1080p screen resolution. 3. mDP4 port refers to the top mDP port of the AMD GPU slot. 4.
Table 10. Known issues Issue number Description Workaround WC-603 When you add or set the newly created user Logging into the account manually once will allow for subsequent logins to auto-login account in auto logon, the This user does until the device is rebooted. not exist error message is displayed. WC-594 Shrinkable OS volume alert window is displayed when you run the ConfigMgr Sysprep in the SCCM configuration. If the volume shrinks, there is no impact to the device or the experience.
Table 11.
Used and free space details Table 12. Used and free space details Platform Flash size Used space Free space Wyse 5070 thin client 32 GB 15.1 GB 13.3 GB Wyse 5070 extended thin client 64 GB 15.2 GB 43 GB Operating system components Table 13. Driver details Driver details Version details for build 10.03.06.10.18.00 Version details for build number 10.03.06.03.19.00 BIOS version 1.1.3 1.1.4 Display Adapter AMD Radeon Graphics—23.20.768.0 AMD Radeon Graphics—23.20.768.
Table 14. Common application, features, and files (continued) Application/features/ files Version details for build 10.03.06.10.18.00 Version details for build number 10.03.06.03.19.00 4.8.0—In VMware Horizon Client Ericom PowerTerm Interconnect for Thin Clients 12.0 12.0 SCCM 2016 client 5.00.8412.1307 5.00.8412.1307 Windows Media Player 12.0.14393 12.0.14393 Internet Explorer 11.00.14393 11.00.14393 Tight VNC 2.6.4.0 2.6.4.0 Ericom connect web connect 7.5.1 7.5.1 .NET Framework 4.6.
Table 14. Common application, features, and files Application/features/ files Version details for build 10.03.06.10.18.00 Version details for build number 10.03.06.03.19.00 Dell Wyse Wallpaper on All Users Supported Supported DirectX 12 12 DellThinClientAppli cation.exe—NewClient Application 10.0.0.15 10.0.0.21 Unified Write Filter manager -Uwfmgr.exe—File Version 10.0.14393.1770 10.0.14393.2312 UWF system tray UI – UWFTray.exe 1.0.4.6 1.0.4.12 UWF Service – UWFSvc.exe 1.0.4.6 1.0.4.
QFEs The following QFEs are added as part of this release: ● KB4048953—build number 10.03.06.10.18.00 ● KB4132216—build number 10.03.06.10.18.00 ● KB4338832—build number 10.03.06.10.18.00 ● KB4345418—build number 10.03.06.10.18.00 ● KB4132216—build number 10.03.06.03.19.00 ● KB4462930—build number 10.03.06.03.19.00 ● KB4462917——build number 10.03.06.03.19.00 For more information, see support.microsoft.com. © 2018 - 2019 Dell Inc. or its subsidiaries. All rights reserved.
