Dell Wyse 5070 Extended Thin Client Gebruikershandleiding Regelgevingsmodel: N12D Regelgevingstype: N12D001 March 2020 Ver.
Opmerkingen, voorzorgsmaatregelen,en waarschuwingen OPMERKING: Een OPMERKING duidt belangrijke informatie aan voor een beter gebruik van het product. WAARSCHUWING: WAARSCHUWINGEN duiden potentiële schade aan hardware of potentieel gegevensverlies aan en vertellen u hoe het probleem kan worden vermeden. GEVAAR: LET OP duidt het risico van schade aan eigendommen, lichamelijk letsel of overlijden aan. © 2018-2020 Dell Inc. of zijn dochtermaatschappijen. Alle rechten voorbehouden.
Inhoudsopgave Hoofdstuk 1: Welcome to Dell Wyse 5070 extended thin client............................................................ 6 Hoofdstuk 2: Chassis overview.........................................................................................................7 Hoofdstuk 3: Hoofdcomponenten van uw thin-client..........................................................................9 Hoofdstuk 4: Supported system peripherals for Wyse 5070 thin client...............................................
Physical specifications......................................................................................................................................................... 41 Environment..........................................................................................................................................................................41 Hoofdstuk 10: Wyse 5070 thin client configuration on ThinOS.......................................................... 42 Introduction...............
Power management screen options................................................................................................................................. 65 POST behavior screen options.......................................................................................................................................... 66 Wireless screen option........................................................................................................................................................
1 Welcome to Dell Wyse 5070 extended thin client Wyse 5070 extended thin client is a high-performance thin client with quad core processors, designed for secure, and easy-to-manage virtual desktop environments. The thin client supports ThinOS, ThinLinux, and Windows 10 IoT Enterprise operating systems. Dell Wyse 5070 is a 5000 series thin client which offers the following: ● Intel Gemini Lake Pentium Quad Core processor. ● Realtek ALC3253 and Intel audio controllers.
2 Chassis overview This section explains the front and rear views of Dell Wyse 5070 extended thin client. Afbeelding 1. Chassis overview 1. Power button/Power light Press to turn on the thin client if it is turned off, in sleep state. 2. Common Access Card reader Reads the CAC or smart card for multi factor authentication. 3. USB 2.0 port Connect peripherals such as external storage devices and printers. Provides data transfer speeds up to 480 Mbps. 4. USB 2.
Connect the serial devices to transfer data and power. 8. Line out port Denotes the audio output to the active speaker. Connect peripherals such as external storage devices, display, and printers. Provides data transfer speeds up to 10 Gbps. 9. Headset port Connect headphones output, a headset (headphone and microphone combo), or speakers. 10. USB Type-C port Enables you to connect peripherals such as external storage devices, display, and printers. Provides data transfer speeds up to 5 Gbps.
3 Hoofdcomponenten van uw thin-client 1. Chassiskap 2. PCIe-module 3. Knoopbatterij 4. Luidspreker en aan/uit-knop 5. CAC-lezer 6. Geheugen 7. Moederbord 8. Solid-state drive 9. Kaart voor draadloos 10. Warmteafleider 11.
4 Supported system peripherals for Wyse 5070 thin client This section contains details on the supported system peripherals that are shipped as part of Wyse 5070 thin client.
Supported mounts This section contains details on the supported mounts for Wyse 5070 thin client. ● P mount ● E mount ● U mount ● Dual VESA mount ● VESA Wall mount OPMERKING: Vertical stand will be shipped as part of Wyse 5070 thin client. For more information on mounts, see Dell Support. Supported system peripherals This section contains details on the supported system peripherals for Wyse 5070 thin client.
5 Setting up the thin client This section explains how to setup the Wyse 5070 extended thin client on premise. The Wyse 5070 extended thin client can be setup with any one of the operating systems at your work place: ● ThinOS ● Windows 10 IoT Enterprise ● ThinLinux To set up the Wyse 5070 extended thin client, do the following: 1. Install the stand. Afbeelding 2. Install the stand 2. Connect the keyboard and mouse.
Afbeelding 3. Install keyboard and mouse 3. Connect the network cable. Afbeelding 4. Connect the network cable 4. Connect the display and press the power button. OPMERKING: The Wyse 5070 thin client must be mounted only on a vertical orientation.
Afbeelding 5. Connect the display 5. Connect the power cable and route the power cable through the cable clip, and press the power button.
Afbeelding 6.
6 Before working on your thin client You must perform the below steps before you work on the thin client. OPMERKING: For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory-compliance. 1. Save and close all open files and exit all open applications. 2. Click Start > Power > Shut down to shut down your thin client. OPMERKING: For shut down instructions, see documentation of the respective operating system. 3.
7 After working on your thin client OPMERKING: You must not leave the stray or loose the screws inside your thin client. This may damage your thin client. 1. Reinstall all the screws and ensure that no stray screws remain inside your thin client. 2. Connect any external devices, peripherals, or cables you removed before working on your thin client. 3. Connect your thin client and all attached devices to their electrical outlets. 4. Turn on your thin client.
8 Removing and installing components This section provides detailed information about how to remove or install the chassis and memory module of your thin client. Onderwerpen: • • • • Chassis cover PCIe module CAC reader Memory Chassis cover Chassis cover provides security for the entire thin client and also helps in maintaining proper air flow inside the thin client. Remove the chassis cover Procedure 1. Follow the procedure in Before working inside your thin client. 2.
Afbeelding 7. Loosen the thumb screw 3. Slide the cover towards the front of the system to disengage the tabs from the guide slots on the thin client.
Afbeelding 8. Slide the cover 4. Lift the cover away from the thin client.
Afbeelding 9. Lift the cover Install the chassis cover Procedure 1. Align the tabs on the chassis cover with the guide slots on the thin client.
Afbeelding 10. Align the tabs 2. Slide the cover until the tabs snap into place.
Afbeelding 11. Slide the cover 3. Tighten the thumb screw to secure the chassis cover to the thin client.
Afbeelding 12. Tighten the thumb screw 4. Follow the procedure in After working inside your thin client. PCIe module The PCIe module is a high-speed serial replacement of the older PCI/PCI-X bus. PCIe uses a shared parallel bus architecture, in which the PCI host and all devices share a common set of address, data, and control lines. Remove the PCIe module Prerequisites Remove the Chassis cover. Procedure 1. Follow the procedure in Before working inside your thin client. 2.
Afbeelding 13.
Afbeelding 14. PCIe module is removed Install the PCIe module Procedure 1. Align the PCIe module with the connector on the system board.
Afbeelding 15. Align the PCIe module 2. Push down the PCIe module to secure it to the system board.
Afbeelding 16. Push down the PCIe module 3. Follow the procedure in After working inside your thin client. Postrequisites Replace the Chassis cover. CAC reader CAC reader enables to read the smart card for multi factor authentication. Remove the CAC reader Prerequisites 1. Remove the Chassis cover. 2. If applicable, remove the PCIe module. Procedure 1. Follow the procedure in Before working inside your thin client. 2. Disconnect the CAC reader cable from the system board.
Afbeelding 17. Disconnect the cable 3. Remove the two screws 1 and 2 that secure the CAC reader bracket to the system board and the chassis.
Afbeelding 18. Remove the screws 4. Lift the CAC reader bracket away from the system board.
Afbeelding 19. CAC reader is removed Install the CAC reader Procedure 1. Align the screw holes on the CAC reader bracket with the screw holes on the system board and chassis. 2. Replace the two screws that secure the CAC reader bracket to the system board and the chassis.
Afbeelding 20. Align the screw holes and replace the screws 3. Connect the CAC reader cable to the system board.
Afbeelding 21. Connect CAC cable 4. Follow the procedure in After working inside your thin client. Postrequisites 1. If applicable, replace the PCIe module. 2. Replace the Chassis cover. Memory A memory module is a circuit board that contains DRAM-integrated circuits that are installed into the memory slot on a system board. Remove the memory module Prerequisites 1. Remove the Chassis cover. 2. If applicable, remove the PCIe module. 3. Remove the CAC reader. Procedure 1.
2. Using your fingertips, spread apart the securing clips on each end of the memory module slot until the memory module pops up. Afbeelding 22. Remove the memory module 3. Slide and remove the memory module from the memory module slot.
Afbeelding 23. Memory cards are removed Install the memory module Procedure 1. Align the notch on the memory module with the tab on the memory module slot. 2. Slide the memory module firmly into the slot at an angle and gently press the memory module down until it clicks into place. OPMERKING: If you do not hear the click, remove the memory module and reinstall it.
Afbeelding 24. Install memory module 3. Follow the procedure in After working inside your thin client. Postrequisites 1. Replace the CAC reader. 2. If applicable, replace the PCIe module. 3. Replace the Chassis cover.
9 Technical specifications This section provides the technical specifications of the Wyse 5070 extended thin client. Onderwerpen: • • • • • • • • • • • • • System specifications Processor Operating systems Memory specifications Storage Audio specifications Communication specifications Ports and connectors specifications Security Battery specifications AC adapter specifications Physical specifications Environment System specifications This section describes the system specifications of the thin client.
Tabel 2. Processor specifications (vervolg) Feature Intel Gemini Lake Pentium Quad Core Maximum three core burst frequency 2.7 GHz Maximum four core burst frequency 2.
Tabel 4. Storage specifications (vervolg) Feature Specification Standard SATA interface ● ● ● ● Connector type 75-pin SATA-based M.2 module pinout Supply voltage 3.3 V +-5% Operation temperature 0˚C to 70˚C Capacity ● eMMC—16 GB and 32 GB ● SSD—0, 32, 64, 128, 256, and up to 512 GB Flash management ● ● ● ● Serial ATA v3.2 SATA 6.0 Gbps interface ATA-8 command set Supports Self-Monitoring, Analysis and Reporting Technology (S.M.A.R.
Tabel 6. Communication specifications (vervolg) Feature Specification Wi-Fi through CNVi interface Antenna ● Dual external antenna connected to the Wireless card ● Frequency (GHz)–2.4 and 5 Wireless options ● Intel Dual Band Wireless-AC 2x2 ● USB 2.0 interface for Bluetooth 5.0 Ports and connectors specifications This section provide details about the ports and connectors in the thin client. Tabel 7.
AC adapter specifications This section describes the power adapter specifications of the thin client. Tabel 9. AC adapter specifications Feature Specification Type 130 W Input voltage 100-240 VAC Input current (maximum) 1.8 A Input frequency 50-60 Hz Output current 6.7 A Rated output voltage 19.
10 Wyse 5070 thin client configuration on ThinOS This section provides the instructions on how to easily configure and efficiently manage Wyse 5070 thin client that runs on ThinOS. . Onderwerpen: • • • • • Introduction Configuring ThinOS using the First Boot Wizard Logging on to the Wyse 5070 thin client running Wyse ThinOS Local settings menu Configuring the printer settings Introduction Thin clients running Dell Wyse ThinOS firmware are designed solely for optimal thin client security and performance.
The thin client validates the configuration file in the USB drive. ○ If the ThinOS configuration file in the USB drive is correct, the Read configuration success message is displayed. Click OK to exit the First Boot Wizard, and log in to the ThinOS system desktop. ○ If the ThinOS configuration file in the USB drive is corrupted or the appropriate file is not available, then the Cannot find configuration files, or read configuration failure message is displayed.
○ Enable theme: VMware View—Select this check box to set the ThinOS desktop theme to VMware View mode. ● DELL—The broker allows you to connect to the virtual desktops or applications using Dell vWorkspace. Enter the host name or IP address of the broker connection. ● Amazon WorkSpaces—The broker allows your PCoIP clients to connect to virtual desktops that run on AWS. Enter the host name/IP address/FQDN of the broker connection. OPMERKING: Amazon WorkSpaces option is applicable only to the PCoIP clients.
Tabel 12. Keyboard parameters Parameter Description Character Set Lists the character sets. Each character is represented by a number. The ASCII character set, for example, uses the numbers 0 through 127 to represent all English characters and special control characters. European ISO character sets are similar to ASCII, but they contain additional characters for European languages. Keyboard Layout Presently the keyboard languages listed in the Keyboard layout drop-down list are supported.
● Resolution—From the Resolution drop-down list, select a display resolution supported by your monitor. In Mirror Mode, the resolution list is derived from the intersection of resolutions in all connected monitors. In Span Mode, select a monitor block and change its resolution from the Resolution drop-down list. ● Rotation—From the Rotation drop-down list, select an option to rotate the monitor screen in different directions—Left turn 90 degrees or Right turn 90 degrees.
The Printer Setup dialog box is displayed. 2. Click the Ports tab, and use the following guidelines: a. Select Port— Select the required port from the list. LPT1 or LPT2 are directly connected to the USB printer.. b. Printer Name — (Required) Enter name you want displayed in your list of printers. Most USB direct-connected printers report/fill in their printer name automatically.
This name can be different for each vendor. This is a required field, and you must ensure to add the correct queue name, as the network printer uses this name for mapping the incoming print jobs. For example, auto can be used for HP LaserJet 4200n PCL6 as per documentation found on the HP Web site. OPMERKING: If the printer is attached to another thin client on your network, the LPD Queue Name must match the content of the Printer Name box displayed on the thin client. f.
11 Wyse 5070 thin client on ThinLinux This section provides instructions on how to easily configure and efficiently manage Wyse 5070 thin client that runs on ThinLinux.
The Customize Your Display page is displayed. Afbeelding 25. Display Settings 2. Select the preferred Resolution from the drop-down list. 3. Select the Rotation type from the drop-down list. ● ● ● ● Normal Right Left Upside-down 4. Click the ON/OFF button to switch between dual display and mirror mode in a dual monitor configuration. 5. Click the ON/OFF button to enable the Set as primary option. This option allows you to set the selected monitor as primary. 6.
Afbeelding 26. Keyboard Preferences 1. Click the ON/OFF button to disable or enable the Key presses repeat when held down option after you log in to the session. 2. Move the slider to the left to decrease the repeated delay time of the pointer or move the slider to the right to increase the repeated delay time of the pointer. 3. Move the slider to the left to decrease the repeat rate of the pointer or move the slider to the right to increase the repeat rate of the pointer. 4.
Tabel 13. 2 screens per row layout Applet window placement at monitor Traverse horizontally to monitor Traverse vertically to monitor Primary monitor (Monitor 1) Monitor 2 Monitor 3 Monitor 2 Primary monitor (Monitor 1) Monitor 4 Monitor 3 Monitor 4 Monitor 5, Primary monitor (Monitor 1) Monitor 4 Monitor 3 Monitor 2, Monitor 6 Monitor 5 Monitor 6 Monitor 3 Monitor 6 Monitor 5 Monitor 4 OPMERKING: ○ You cannot drag the applet window diagonally across the monitors.
Afbeelding 27. Mouse Preferences The Mouse setting page enables you to set the Mouse preferences. 1. Click Right or Left to set the primary button of the mouse. 2. Move the slider to the left to increase the speed of the pointer when double-clicked or move the slider to the right to decrease the length of double-clicked. 3. Move the slider to the left to increase the speed of the mouse pointer or move the slider to the right to decrease the speed of the mouse pointer. 4. Click Save to save your changes.
Afbeelding 29. Add New Printer 1. Click the printer icon. The gnome-control-center printer dialog box is displayed. 2. Click Add New Printer button to include the new printer in the printers list available on the left pane. The Add a new printer window is displayed. 3. Enter the address of the printer or the text to filter results. OPMERKING: If a USB printer is connected, then it is displayed by default. The printer is not found if wrong address is provided or the USB is not attached. 4.
12 Wyse 5070 thin client on Windows 10 IoT Enterprise This section provides the instructions on how to easily configure and efficiently manage Wyse 5070 thin client that runs on Windows 10 IoT Enterprise. Onderwerpen: • • • • • Introduction Voordat u uw thin clients configureert Automatic and manual login Keyboard and region settings Devices and printers Introduction The thin clients running Windows 10 IoT Enterprise provide access to applications, files, and network resources.
Dell is not responsible for, and will not, warrant, support, repair or replace any thin client device or component that fails to operate properly due to a failure to follow these instructions. When you start the thin client, you will automatically log in to the user desktop by default. OPMERKING: The Windows icon on the taskbar is the start menu button. To log in as a different user or administrator: 1. Go to Start > User icon > Sign Out to log out from the current desktop. 2.
4. Click Apply, and then click OK. 5. In the Location tab, select a particular location to display additional information such as news and weather. 6. In the Administrative tab, change the language to be displayed in programs that do not support Unicode, and copy the settings. Devices and printers To add devices and printers, use the Devices and Printers window.
13 BIOS overview Onderwerpen: • • • • • • • • • • • • • • • • Accessing thin client BIOS settings System Setup overview Boot Sequence Navigation keys General screen options System Configuration screen options Video screen option Security screen options Secure Boot screen options Performance screen options Power management screen options POST behavior screen options Wireless screen option Virtualization support screen options Maintenance screen options System Logs screen option Accessing thin client BIOS s
Boot Sequence Boot Sequence allows you to bypass the System Setup–defined boot device order and boot directly to a specific device. During the Power-on Self Test (POST), when the Dell logo appears you can: ● Access System Setup by pressing the F2 key ● Bring up the one-time boot menu by pressing the F12 key The one-time boot menu displays the devices that you can boot from including the diagnostic option.
Tabel 16. General screen options (vervolg) Option Description ● Memory Information: Displays Memory Installed, Memory Available, Memory Speed, Memory Channels Mode, Memory Technology, DIMM A Size, DIMM B Size OPMERKING: Since Memory Available is less than the Memory Installed, certain operating systems may not be able to use all the available memory. ● PCI information: Displays Slot details, by default Slot1 is empty.
Tabel 17. System Configuration options (vervolg) Option Description 2nd NIC (RJ-45/SFP) The second NIC (RJ-45/SFP) option controls the second onboard NIC. The options include: ● Disabled ● Enabled ● Enabled w/PXE—This option is enabled by default Parallel Port This option determines how the parallel port on the docking station operates. The options include: ● ● ● ● Serial Port1 Disabled AT—enabled by default PS2 ECP This option determines how the serial port on the docking station operates.
Tabel 17. System Configuration options (vervolg) Option Description ● ● ● ● Rear port Top Left—enabled by default Rear port Bottom Left—enabled by default Rear port Top Right—enabled by default Rear port Bottom Right—enabled by default USB PowerShare This option configures the USB PowerShare feature and allows you to charge external devices through the USB PowerShare port when system is off. This option is enabled by default. Audio This option enables or disables the integrated audio controller.
Tabel 19. Security screen options (vervolg) Option Description uppercase character and one lowercase character. The password must be at least eight characters long. Password Configuration This option enables you to specify the minimum and maximum password lengths of the administrator and system passwords. ● min-4—By default, the minimum value is set to 4. You can increase the value. ● max-32—By default, the maximum value is set to 32. You can decrease the value.
Secure Boot screen options Tabel 20. Secure Boot screen options Options Description Secure Boot Enable This option enables or disables the secure boot feature. By default, the Secure Boot Enable option is not set. Secure Boot Mode This option enables you to change the secure boot operation mode, modifies the behavior of secure boot to allow evaluation or enforcement of the UEFI driver signatures.
Tabel 21. Performance options (vervolg) Option Description This option is disabled by default. Intel TurboBoost This option enables you to enables or disables the Intel TurboBoost mode of the processor. The option is: Enable Intel TurboBoost—This option is enabled by default. Power management screen options Tabel 22. Power management options Option Description AC Recovery This option enables you to control the system’s behavior when AC power is restored after a AC power loss.
Tabel 22. Power management options (vervolg) Option Description ● LAN Only ● LAN with PXE Boot Block Sleep The Block Sleep option blocks you from entering to sleep mode in the operating system environment. Block Sleep—This option is disabled by default. POST behavior screen options Tabel 23. POST behavior options Option Description Adapter Warnings This option enables or disables the system setup (BIOS) warning messages when you use certain power adapters.
Virtualization support screen options Tabel 25. Virtualization options Option Description Virtualization This option enables or disables the Intel Virtualization Technology. Enable Intel Virtualization Technology (default). VT for Direct I/O This option specifies whether a virtual machine monitor can utilize the additional hardware capabilities provided by Intel Virtualization Technology for Direct I/O. This option is not enabled by default. Maintenance screen options Tabel 26.
14 Troubleshooting your system You can troubleshoot your system using indicators like diagnostic lights, and error messages during the operation of the device. Onderwerpen: • • • Power state and LED status Voedingsgedrag Power LED error code behavior Power state and LED status Tabel 28. Power states and LED behavior Indicator Power LED Symptoms Description Solid white Thin client is in working—S0 state. Breathing white Thin client is in sleep—S3 state. Off Thin client is in off state.
Tabel 29. Voedingsgedrag (vervolg) netadapter Systeemgedrag POST-foutmelding Vermogen netadapter is lager dan energieverbruik van de CPU. Er is geen opstart- of foutmelding, maar het Als het systeem kan opstarten: systeem wordt uitgeschakeld. Waarschuwing: xxxxxxW netadapter is gedetecteerd, met lager vermogen dan het vermogen van de oorspronkelijk geleverde aanbevolen xxxxxxW-netadapter. Het systeem kan niet opstarten. Sluit een Dell xxxxxxW netadapter of hoger aan voor optimale systeemprestaties.
● Type B 70 Troubleshooting your system
○ Log the fault event, if possible.
○ Emit the LED error code pattern.
○ Repeat the LED error code 3 more times.
○ Leave the LED light up in amber color.
○ Continue with POST.
