Dell Wyse 5070 and 5070 Extended Thin Client Accessories Setup Guide
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2018 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents 1 Supported displays ...................................................................................................................... 4 2 Mounting the thin client on the vertical stand.................................................................................5 3 Installing the thin client on the E-series VESA mount...................................................................... 6 4 Installing the thin client on the VESA wall mount ..................................................
1 Supported displays The following Dell displays are supported by Dell Wyse 5070 thin client: • • • • • • • • • • • • • • • • • • • • • • MR2416 U2518D U2718Q U2419H/HC U2415 U2719D/DC P2415Q P2417H P2317H P2217H P2016 P2419H/HC P2719H/HC P4317Q E2417H E2318H E2218HN E2016H E1916H P3418HW P2219HC/P2219H P2319H For more information about these displays, see Dell Support.
2 Mounting the thin client on the vertical stand Figure 1.
3 Installing the thin client on the E-series VESA mount 1. Figure 2. Removing the back cover plates 2. Figure 3.
3. Figure 4. Routing the cables 4. Figure 5. Tightening the shoulder screws 5. Figure 6.
6. Figure 7. Locking the adapter box 7. Figure 8. Attaching the thin client and adapter box 8. Figure 9.
4 Installing the thin client on the VESA wall mount 1. Figure 10. Insert the thin client into the metal bracket 2. Figure 11.
3. Figure 12.
5 Installing the thin client on the P and U series VESA mount 1. Figure 13. Assembling the P/U mount holder 2. Figure 14.
3. Figure 15. Assembling the stand with the P/U mount to the display 4. Figure 16. Tightening the shoulder screws 5. Figure 17.
P and U series mount with display in vertical and horizontal orientation Figure 18.
Figure 19.
6 Installing the thin client on the Dual VESA mount NOTE: Always mount the Wyse 5070 thin client in a vertical position as shown in the images. Do not mount the thin client in any other orientation. However, you can rotate the display to either a horizontal or vertical orientation before mounting the thin client. 1. Figure 20.
2. Figure 21. Inserting the cables into the adapter box 3. Figure 22. Locking the adapter box 4. Figure 23.
5. Figure 24. Attaching the cable cover and display stand Topics: • Dual VESA mount display in vertical and horizontal orientation Dual VESA mount display in vertical and horizontal orientation Figure 25.
Figure 26.
7 Installing the Dual VESA Mount Interposer NOTE: The Dual VESA Mount Interposer is for use only with a non-Dell Monitor Arm (Ergotron, Humanscale, etc.,). NOTE: Before you begin the installation procedure, ensure that the box contains the following: Interposer (1), M4 x L30 mm screws (4), M4 x L3.2 mm nuts (4), and M4 x L9 mm thumbscrew (1). Figure 27. Installing the Interposer to the Arm NOTE: The thumbscrew is inserted in the space between the Interposer and the arm's VESA plate.
