Windows 10 IoT Enterprise LTSB 2016 Maintenance Release 2 Release Notes
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2019 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents 1 Release summary..........................................................................................................................5 Priority and recommendations............................................................................................................................................. 5 2 Compatibility............................................................................................................................... 6 Build details................................
Operating system components..........................................................................................................................................23 5 Fixed issues............................................................................................................................... 25 6 Known issue...............................................................................................................................26 7 Resources and support.................................
1 Release summary This release note contains information about the Windows 10 IoT Enterprise multilingual build 10.0.14393 that runs on Wyse 5070 Thin Client, Wyse 5470 Thin Client, and Wyse 5470 All-in-One Thin Client. The operating system is based on Windows 10 Enterprise 2016 LTSB, also known as Redstone 1 (RS1). The build can be pushed on thin clients with 32 GB eMMC, 64 GB SSD, 128 GB SSD, 256 GB SSD, and higher with 4 GB and 8 GB RAM. Version • • • 10.03.08.11.19.00—Wyse 5470 Thin Client 10.03.06.
2 Compatibility Build details Table 1. Build details of Dell Wyse 5070 Thin Client Release detail Specification Platform Dell Wyse 5070 Thin Client Product Windows 10 IoT Enterprise 2016 LTSB Build version/Kernal version 10.0 Build number 10.03.06.11.19.00 BIOS version 1.2.4 Table 2. Build details of Dell Wyse 5470 Thin Client Release detail Specification Platform Dell Wyse 5470 Thin Client Product Windows 10 IoT Enterprise 2016 LTSB Build version/Kernal version 10.0 Build number 10.03.
Wyse 5070 Thin Client Wyse 5470 All-in-One Thin Client Wyse 5470 Thin Client German (de-DE) German (de-DE) German (de-DE) French France (fr-FR) French France (fr-FR) French France (fr-FR) French Canada (fr-CA) French Canada (fr-CA) French Canada (fr-CA) Italian (it-IT) Italian (it-IT) Italian (it-IT) Spanish (es-ES) Spanish (es-ES) Spanish (es-ES) Japanese (ja-JP) Japanese (ja-JP) Japanese (ja-JP) Korean (ko-KR) Korean (ko-KR) Korean (ko-KR) Chinese Simplified (zh-CN) Chinese Simpli
Thin Client Port preferences • • • • When a monitor is connected using USB-C port, DisplayPort 2 becomes inactive. When a VGA monitor is connected the VGA optional port, DisplayPort 3 becomes inactive. Power option is available on the first serial port. PCle slot is available. Wyse 5070 Thin Client with Celeron processor Table 6.
Table 9. Ports Ports DP1 DP2 DP3 VGA USB Type-C Monitor priority 1 2B2 3B3 3A3 2A2 4K display resolution Yes Yes Yes No1 Yes Non-4K resolution Yes Yes Yes Yes Yes 1. VGA port does not support 4K display. However, it supports a display with 1080p screen resolution. 2. DP2 and USB Type-C port are mutually exclusive with USB Type-C port taking higher priority. 3. DP3 and VGA port are mutually exclusive with VGA port taking higher priority.
Figure 1. Ports of Wyse 5070 Extended Thin Client Table 11. Ports Ports DP1 DP2 DP3 VGA USB-C mDP43 mDP54 DP65 Monitor priority 1 2B6 3B7 3A7 2A6 4 5 6 4K display Yes resolution Yes Yes No1 Yes Yes Yes Yes Non-4K resolution Yes Yes Yes2 Yes Yes Yes Yes 1. 2. 3. 4. 5. 6. 7. Yes VGA port does not support 4K display. However, it supports a display with 1080p screen resolution. VGA port supports 1080p screen resolution.
Audio capability—Audio is supported on all DP ports except DP3.
3 General features Wyse Easy Setup Wyse Easy Setup enables administrators to quickly and easily deploy configurations on thin clients. Wyse Easy Setup enables you to: • • • Create a dedicated browser-focused client by configuring the Internet Explorer settings. Configure multiple broker connections such as Citrix, VMware, and Remote Desktop Protocol (RDP). Configure a device to create a dedicated application for a particular line of business.
Application Launch Manager The Application Launch Manager (ALM) version 1.1.0.3 enables you to start an application that is based on predefined events such as service startup, user login/logoff, or system shutdown in system account. You can also configure multilevel logs which are essential for troubleshooting using the DebugLog.xml file. You can add or remove application configuration nodes from the ALM configuration file using the command-line interface.
Ericom Connect Client Ericom Connect Client maximizes the value of Terminal Servers (RDS), virtual desktops (VDI), Web applications, Cloud services, and legacy host systems. For IT departments of all sizes, PowerTerm Web Connect streamlines the management and utilization of IT resources, and also protects earlier IT investments and improves the end user-experience.
Table 12. Login credentials Account detail Password User DellCCCvdi Admin DellCCCvdi TightVNC—Administrator DELL BIOS—Administrator Fireport Unified Write Filter Unified Write Filter (UWF) is a sector-based write filter that protects your storage media. UWF redirects the write attempts to a virtual overlay, and intercepts the write attempts to the protected volume. This improves the stability, reliability of the device thereby reducing the wear on write media, such as solid-state drives.
product. Dell is not responsible for, and will not, warrant, support, repair or replace any thin client device or component that fails to operate properly due to a failure to follow these instructions. Windows Defender Advanced Threat Protection Windows Defender Advanced Threat Protection feature helps enterprises to detect, investigate, and respond to advanced attacks on their networks.
NOTE: You must shrink the drive C manually to reduce the hard drive size to 16 GB or less. To run the Custom Sysprep tool, do the following: 1. Go to \Windows\Setup. 2. Right-click Build_Master.cmd, and select Run as administrator. The Config Master window is displayed. Figure 2. Config Master 3. Click Next. The Configuration screen is displayed. Figure 3.
4. Select Custom configuration in the Configurations section. 5. Enable or disable hostname calculation in the Host Name calculation section. 6. Enter the appropriate values in the Configure Domain options section, and click Save Credentials—optional. 7. Click OK when prompted—optional. 8. Select Enable local account credentials changes—optional. The changes that are made to the credentials are applied. 9. Click Next. The Credential Manager page is displayed. 10.
Figure 5. Configuration 4. In the Configurations section, select SCCM configuration. 5. In the Host Name calculation section, enable or disable hostname calculation. NOTE: The Configure Domain Option and Configure local account credentials field are grayed out. 6. Click Apply to save the changes. After the completion of SCCM Config Sysprep, the HAgent service ends. You can now perform the pull operation using SCCM.
4 Important notes Hardware support information • • • Rich 4K display capability is provided. Video adapters—DP to DVI, DP to VGA, USB C to DP—is supported. Dynamic throttling for higher performance is supported. Test Environment Table 13. Test Environment Thin client CPU Name Build Package Name Product Version Wyse 5070 Thin Client with Celeron processor Intel Celeron J4105 CPU at 1.50 GHz WIE10_5070_No vember2019.
Used and free space details Table 15. Used and free space details Platform Flash size Used space Free space Wyse 5470 Thin Client 32 GB 16.1 GB 10.3 GB Wyse 5470 Thin Client 128 GB 16.0 GB 97.9 GB Wyse 5470 All-in-One Thin Client 32 GB 14.6 GB 11.1 GB Wyse 5470 All-in-One Thin Client 128 GB 14.7 GB 99.1 GB Wyse 5070 Thin Client with Celeron processor 32 GB eMMC 14.7 GB 11.00 GB Wyse 5070 Thin Client with Celeron processor 64 GB 14.8 GB 39.
Product Product description Input devices Dell Laser Scroll USB 6-Buttons Silver and Black Mouse Dell MS116 USB Wired Optical Mouse Black Dell Wireless Mouse WM326 Dell Premier Wireless Mouse WM527 Dell Wireless Keyboard and Mouse Combo KM636 Monitors Dell 20 Monitor E2016H Dell 20 Monitor E2016Hv (China only) Dell 22 Monitor E2216H Dell 22 Monitor E2216Hv (China only) Dell 22 Monitor E2218HN Dell 23 Monitor E2318H Dell 24 Monitor E2417H Dell UltraSharp 27 Monitor U2718Q - 4K Dell 20 Monitor P2018H Del
• KB4346087 For more information, see support.microsoft.com. Operating system components Table 17. Driver details Driver details Wyse 5470 Thin Client Wyse 5470 All-in-One Thin Client Wyse 5070 Thin Client BIOS version 1.1.1 1.2.1 1.2.4 Display Adapter Intel UHD Graphics 600 version 26.20.100.6998 Intel UHD Graphics 600 version 26.20.100.6812 Intel UHD Graphics 600 version 23.20.16.4933 AMD Embedded Radeon E9173 version 23.20.768.
Application/features/files Version details J4100 Map 3.0.3.0 SCCM 5.00.8790.1007 (2019) Build Content 1.0.0.7 MUI tool 1.0.0.9 Dell Secure Client (DSC) 1.0.0.150 Dell Thin Client App 10.0.0.26 MS Lync VDI 2013 15.0.4569.1506 Custom Sysprep No version Quick Start No version Ericom PowerTerm interconnect for thin clients 12.0 Ericom connect WebConnect client 7.5.
5 Fixed issues Table 19. Fixed issues Issue ID Description WIN-1005 Fixed an issue where you were unable to print more than 10 pages from VMware Blast and VMWare-PCoIP session. WC-871 Fixed an issue where the RDP display configuration is not set to Full Screen in RDP Connection and Application Configuration in Wyse Easy Setup on Wyse 5470 All-in-One Thin Client.
6 Known issue WC–873—The default server for the VMware connection is set to an incorrect URL http://www.wyse.com.
7 Resources and support Accessing documents using the product search 1. Go to www.dell.com/support. 2. In the Enter a Service Tag, Serial Number, Service Request, Model, or Keyword search box, type the product name. For example, Wyse 3040 thin client or Wyse ThinOS. A list of matching products is displayed. 3. Select your product and click the search icon or press Enter. 4. Click Manuals & documents. Accessing documents using product selector You can also access documents by selecting your product. 1. 2.
8 Contacting Dell Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. To contact Dell for technical support or customer service issues, see www.dell.com/contactdell. If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or the product catalog.