Dell Wyse Enhanced Windows Embedded Standard 7P for Wyse 5060 Thin Client Administrator’s Guide
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2018 2017 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents 1 Introduction....................................................................................................................................................5 About this Guide.................................................................................................................................................................5 Supported Platforms.............................................................................................................................................
Display: Rotation............................................................................................................................................................... 21 Network and Sharing Center: Wireless Local Area Network (WLAN)Settings........................................................22 Realtek HD Audio Manager.............................................................................................................................................22 Setting Region and Language........
1 Introduction Supported clients running Dell Wyse Enhanced Windows Embedded Standard 7P provide access to applications, files, and network resources within Citrix, Microsoft, VMware and Dell vWorkspace environments, and other leading infrastructures. The thin clientOptiplex client contains a full featured Internet Explorer browser and thin clientOptiplex client emulation software called Ericom — PowerTerm Session Manager.
2 Getting Started This section describes the activities that you must perform to start using your thin clientOptiplex client: To get started using your thin clientOptiplex client, see: • Logging On. • Using your Desktop. • Before Configuring Your Thin Client. • Connecting to a Printer. • Connecting to a Monitor. • Power State.
NOTE: As an administrator, you can use Auto Logon to configure your thin client to start with the Logon window so that you can simply log in as an administrator. For more information, see Enabling Auto Logon. 3 If automatic logon is not enabled, the logon window is displayed when you boot the thin client. You can log in using the options mentioned in step 2. We recommend you change the default passwords of your thin client.
Working with the File Based Write Filter Utility The File Based Write Filter provides a secure environment for thin client Optiplex client computing by protecting the thin client Optiplex client from undesired flash memory writes. Changes made to the thin client Optiplex client configurations are lost when the thin client Optiplex client is restarted unless the files of the File Based Write Filter cache are cleared during the current system session.
3 • Sleep— This mode enables the power-saving state and allows the thin clientOptiplex client to quickly resume full power operations when you want to start working again. • Shut down– Preferred for orderly closing of the operating system. You can also log off the thin clientOptiplex client by any of the following ways: • From the Start menu, click log off if you want to log off your thin clientOptiplex client. • Press CTRL+ALT+DEL and then click log off.
3 Accessible Applications When you log in to your thin clientOptiplex client, the Windows desktop displays certain notable features. You can perform the following activities: • Browse the internet using Internet Explorer, see Using the Internet Explorer. • View Dell Thin Client Application, see Using the Dell Thin Client Application. • Configure Citrix Receiver session services, see Using the Citrix Receiver. • Use Ericom PowerTerm, see Using Ericom Power Term WebConnect.
• • • • • Product ID • Model Name • Product Version • Windows Embedded Version • Manufacturer • Hardware Rev • OS Name • Serial Number • Website • Localized Language • Product Activation Status Under the CPU category, the following attributes are listed: • Name • Speed • Address Width • Data Width Under the Memory/Storage category, the following attributes are listed: • RAM Memory • Flash • System Partition Under the BIOS category, the following attributes are listed:
Using the Citrix Receiver Citrix Receiver is a server-based computing technology that separates the logic of an application from its user interface. The Citrix Receiver client software installed on the thin client device allows the user to interact with the application GUI, while all of the application processes are executed on the server.
g 2 To log out, click File > Logout in DELL- Ericom Application Zone window. Accessing Ericom Power Term WebConnect through Web Browser : a Click Internet Explorer icon in the taskbar on Thin Client Administrator desktop. b c Internet Explorer web page is displayed. Enter the URL http://serverIP/FQDNWebConnect6.0/AppPortal/Index.asp to access the Ericom Power Term Emulation. PowerTerm WebConnect Application Portal page is displayed.
To configure a Remote Desktop Connection: 1 Log in as user or administrator. 2 On the taskbar, click the start button, and then click All Programs. 3 Click Remote Desktop Connection on the Programs menu, and then click Remote Desktop Connection. The Remote Desktop Connection dialog box is displayed. You can also double-click the Remote Desktop Connection icon on the desktop to open the Remote Desktop Connection dialog box. 4 In the Computer box, enter the computer or the domain name.
The VMware Horizon Client dialog box is displayed. 2 In the VMware Horizon Client dialog box, enter the host name or IP address of a View Connection Server in the Connection Server box, and then click Connect. 3 Enter your credentials, and then click Login. 4 Select a desktop from the list, and then click Connect. VMware Horizon Client connects to the selected desktop. After connection is established, you can view the client window. For more information, go to www.vmware.
4 Notable Administrator Features This chapter explains the notable administrator features that are available for you to configure.
Configuring the Component Services To access and configure the Component Services, Event Viewer and Local Services use the Component Services console. 1 Log in as an administrator. 2 On the Start menu, click Control Panel > Administrative Tools 3 From the Administrative Tools list, select Component Services. 4 In the Component Services console select Component Services, Event Viewer or Local Services from the drop-down list to configure.
b Under TPM Support, select Enabled to enable the TPM. c To save your changes, press the F10 key. 3 Restart the client to the OS. Verify that the OS has a separate system partition which contains the files needed to start the client. By default the system partition is an active partition. 4 Launch the Services.
NOTE: The limitations of CAD Tool are: • The CAD tool does not work for Xen Desktop in a Citrix session, but works only for Citrix Xen applications. • This does not work with VMware View Version 3.3.0 Build 2507564 . System Center Configuration Manager To view and configure the Microsoft SCCM components installed on your thin clientOptiplex client, use the Configuration Manager Properties. To open Configuration Manager Properties dialog box, go to Start > Control Panel > Configuration Manager.
• Enable or disable Auto Logon • Change the Default User Name • Change the Default Password • Change the Default Domain Device Manger: Bluetooth Connections You can access Bluetooth- enabled devices in your thin-client device, if your thin-client has optional Wireless Bluetooth capability. 1 To manage an existing Bluetooth device : a b c Go to Start > Control Panel > Device Manager Click Bluetooth Radios.
e f g Select Do not share this printer and click Next. Select whether to print a test page and click Next. Click Finish to complete the installation. A test page will print after installation if this option was selected. Adding Device To add a device to the thin clientOptiplex client: 1 Click the Devices and Printers icon in Control Panel and open the Devices and Printers window. 2 To open and use the Add a Device wizard, click Add a Device. The Add a Device wizard session starts.
Network and Sharing Center: Wireless Local Area Network (WLAN)Settings If Dell Wyse supported WLAN hardware modules are installed on the thin client, clicking the Network and Sharing Center icon in the Control Panel allows you to: 1 2 3 Manage Wireless Networks (click the Manage Wireless Networks link): • Add —Click Add to open and use the wizard to add a wireless network to edit an existing wireless network, right-click it, and then select Properties to open and use the Network Properties dialog box.
• • • Recording : Select a recording device to modify its settings. After the changes are made, click Apply. Sounds : A sound theme is a set of sounds applied to events in Windows and programs. You can select an existing scheme or save one you have modified. After the changes are made, click Apply. Communications : Windows can automatically adjust the volume of different sounds when you are using your PC to place or receive phone calls.
• Spanish—es-ES • French France—fr-FA • French Canadian—fr-CA • Italian—it-IT • Japanese—ja-JP • Korean—ko-KR • Chinese Simplified—zh-CN • Chinese Traditional—zh-TW • Portuguese Brazilian—pt-BR Imaging Support using WDM/USB Use WDM or USB imaging tool to image the Wyse 5060 thin clients running WES7P unified build. Unified build contains the language metadata in the Merlin partition. Imaging the unified build results in the same MUI language that is available in Merlin.
5 Additional Administrator Utility and Settings Information This chapter provides additional information about utilities and settings available for administrators.
• Wake-on-LAN — This standard Windows Embedded Standard feature discovers all thin clients in your LAN, and enables you to wake them up by clicking a button. This feature allows WDM software, for example, to perform image updates and remote administration functions on devices that have been shut down or are on standby. To use this feature, the thin client power must remain on. • Thin Client Time —After power off, clock time will not be lost as long as the power source remains on.
Changing Passwords with the File Based Write Filter On Microsoft Windows based machines, account passwords are regularly changed with the domain controller for security purposes. The same password process is applicable for a thin clientOptiplex client if the thin clientOptiplex client is a member of such a domain. With the File Based Write Filter enabled, a thin clientOptiplex client will successfully make this password change with the domain controller.
Adds the file or the directory to the exclusion list of the volume. That is, the file or directory is removed from the protection of the File Based Write Filter. The exclusion will take effect after the next system reboot. The file or directory path must be an absolute path starting with \. • fbwfmgr /removeexclusion C: Removes the file or the directory from the exclusion list of the volume. That is, the file or directory is included within the protection of the File Based Write Filter.
• b Reboot Time Delay (in seconds) — Shows the number of seconds that will lapse before system reboot in the Warning #2 ( percent) case of cache overflow for the current session. FBWF Cache Settings area includes: • Amount of RAM to be used for FBWF Cache — Shows (in MB) the amount of RAM (in MB) that is to be used as File Based Write Filter cache for the next session. This value should be in the range of 16 MB to 1024 MB.
• Selected Items Now • Last User at log-on NetXClean purges selected directories, files, and profiles. It uses a configuration file to determine which directories and files to purge and what not to purge. To select different directories and files to purge, you must select them in the configuration file. NOTE: NetXClean purge selections are made by the manufacturer and should not be changed without manufacturer supervision.
Drive C is the on-board non-volatile flash memory. It is recommended that you avoid writing to drive C. Writing to drive C reduces the free disk space. If the free disk space on C drive is reduced to 90 percent of the total disk space, then thin clientOptiplex client will become unstable. NOTE: We highly recommend that 3 MB of disk space is left unused.
c 5 Click OK. To join a thin clientOptiplex client to a domain, click Network ID. The Join a Domain or Workgroup wizard is displayed. On the first page of the wizard, select the option that describes your network. • Business Network 1 Click Next. 2 Select the option according to your company’s network availability on a domain.
no response is detected. WinPing sends one echo request per second, calculates round-trip times and packet loss statistics, and displays a brief summary upon completion. 1 Click Start > Run. 2 Enter the WinPing in the Open box, and then click OK The Dell Wyse WinPing dialog box is displayed. a b c Enter a valid IP address in the IP address box. In the Retries box, type or select the number of echo requests you want to send out to the network lost. Click Ping.
Editing User Accounts To edit the default settings of a Standard User or Administrator account, click on the account you want to modify in the Manage Accounts window and then make your changes. To edit the default settings of a standard user or administrator account: 1 On the User Accounts window, click Manage another account. The Manage Accounts window is displayed. 2 To change as required, select User. The Change an Account window is displayed. Now make the desired changes using the links provided.
6 System Administration This chapter contains local and remote system administration information to help you perform the routine tasks needed to maintain your thin client environment. It includes • Restoring Default Settings. • Accessing Thin Client BIOS Settings. • Imaging Devices with the Dell Wyse USB Imaging Tool. • Configuring and Using Peripherals. • Using TightVNC (Server and Viewer) to Shadow a Thin Client. • WDM Software for Remote Administration.
NOTE: To access the Boot Menu screen, during the system restart, press the P key. The P key functionality is valid only if you enable the Popup menu option in the BIOS settings. Imaging Devices with the Dell Wyse USB Imaging Tool Dell Wyse USB Imaging Tool provides a simple USB imaging solution to help IT and Customer Service staff quickly and easily image supported devices. Using the tool’s flexible Windows utility, users can easily: • Configure a USB key to copy or pull firmware from a source device.
• IP address or valid DNS name of the thin clientOptiplex client to be shadow, operate or monitor. For more information, see Using the Dell Thin Client Application. • Primary password of the thin clientOptiplex client to shadow, operate or monitor. For more information, see Configuring TightVNC Server Properties on the Thin Client. NOTE: • To obtain the IP address of the administrator’s thin clientOptiplex client, move the pointer over the TightVNC icon in the taskbar.
4 • Use mirror driver if available • Grab transparent windows. In the Server tab , retain the following check boxes blank: • Block remote input events • Block remote input on local activity • No local input during client sessions. 5 In the Main server port box, select or type 5900. 6 In the web access port box, select or type 5800. 7 In the Screen poling cycle box, select or type 1000. 8 Click OK.
7 Using Dynamic Host Configuration Protocol (DHCP) This appendix contains the DHCP options you can use with your thin clientOptiplex client. A thin clientOptiplex client is initially configured to obtain its IP address and network configurations from a DHCP server, new thin clientOptiplex client or a thin clientOptiplex client reset to default configurations. A DHCP server can also provide the IP address or DNS name of the file server and the root-path location of software in Microsoft .
161 File server list. Optional string. Can be either the name or the IP address of the File server where the updated thin clientOptiplex client image is stored. If a name is given, the name must be resolvable by the DNS server(s) specified in Option 6. If the option provided by the server is blank or the server provides no value for the field, the machine on which the DHCP server resides is assumed to also be the file server. 162 Root path to the file server. Optional string. (FTP/HTTP/HTTPS).
• HTTP or HTTPS: For HTTP or HTTPS, the default WCM configuration path is the path specified by the virtual directory in IIS; usually wwwroot. For example, C:\inetpub\wwwroot\Wyse \WES7. NOTE: For custom WCM configuration paths use only one of the following string values where Finance is your custom defined pathfor DHCP Option 196: • • • FTP custom example: C:\inetpub \ftproot\Wyse\WES7\Finance HTTP custom example: C: \inetpub\ftproot\Wyse \WES7\Finance HTTPS custom example: C: \inetpub\ftproot\Wyse \WES