Dell Wyse 1010 Zero Client User’s Guide
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2016 - 2018 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents 1 Setting Up Your Zero Client............................................................................................................................ 4 2 Important Information....................................................................................................................................5 3 Safety Guidelines...........................................................................................................................................
1 Setting Up Your Zero Client Make sure that you have read Safety Guidelines before setting up and operating this product. Refer to the figures and proceed as follows: 1 Install Windows MultiPoint Server on the Server: Install according to the Microsoft installation documentation at www.microsoft.com/windows/mulitpoint/default.aspx 2 Important: Wyse 1010 zero clients can be installed on Microsoft Windows MultiPoint Server 2012 (Standard or Premium).
2 Important Information Dell Support: For the self-service portal, knowledge base, software downloads, registration, warranty extensions/RMAs, reference manuals, and so on, see dellwyse.com/support Dell and the Environment: Information about Dell compliance with RoHS and with the Waste Electrical and Electronic Equipment (WEEE) is available at, www.dell.com/environment Dell and E-Recycling: Information about recycling of Dell product is available at, www.dell.
3 Safety Guidelines Improper connection, mounting, or use of this product could result in component failure or undesired interference. Read the following guidelines before setting up and operating the device. 1 Setup: 2 • Do not force a connector into its socket. If any undue resistance is encountered, ensure that the connector is correctly oriented to the receptacle. • The main unit is not user serviceable; opening or accessing the case may violate your warranty.