Reference Guide

Copyright © 2011 Avenda Systems, Inc. All rights reserved worldwide. Avenda Systems, its product and program names and design marks are trademarks of Avenda
Systems, Inc. All other trademarks mentioned in this document are the property of their respective owners.
Customer Support Note
Configuring Windows XP Service Pack 3 for Health Checks
The following commands are used to enable Windows XP SP 3 for health checks. The commands should
be run from a command prompt with elevated privileges. Furthermore, please ensure that the
"Network Access Protection Agent" service (Control Panel > Services) is running, and set to start
automatically.
1. Enable EAP enforcement client on XP for wired connections
 Open a command prompt and type the following:
c:\> netsh nap client set enforcement ID = 79623 ADMIN = "ENABLE"
2. Enable EAP enforcement client on XP for wireless connections
 Open a command prompt and type the following:
c:\> netsh nap client set enforcement ID = 79620 ADMIN = "ENABLE"
3. Verify EAP enforcement by using the following
 From the command line prompt:
c:\> netsh nap client show configuration
4. Lastly, restart the Network Access Protection Agent service mentioned above
For Customer Support Assistance
[e-mail] or 408 748 0902 x300