AirGroup Configuration How-‐To with ClearPass 6.0.
Copyright © 2012 Aruba Networks, Inc. Aruba Networks trademarks include , Aruba Networks®, Aruba Wireless Networks®, the registered Aruba the Mobile Edge Company logo, Aruba Mobility Management System®, Mobile Edge Architecture®, People Move. Networks Must Follow®, RFProtect®, Green Island®. All rights reserved.
Contents Audience ........................................................................................................................................................................................................... 7 Typographic Conventions ......................................................................................................................................................................... 7 Contacting Support ........
4| AirGroup Configuration How-To with ClearPass 6.0.
Figures Figure 1 Configuring a UDP port for AirGroup’s RFC 3576 ....................................................................................................... 10 Figure 3 Airgroup AAA profile RFC 3576 server ............................................................................................................................ 11 Figure 4 Configure AirGroup Services .
6| AirGroup Configuration How-To with ClearPass 6.0.
Preface Audience This A i r G r o u p C o n f i g u r a t i o n H o w -‐ T o w i t h C l e a r P a s s 6 .0 .1 is intended for system administrators and people who are setting up AirGroup configuration with ClearPass 6.0.1. Typographic Conventions The following conventions are used throughout this manual to emphasize important concepts.
Contacting Support Main Site arubanetworks.com Support Site support.arubanetworks.com Airheads Social Forums and Knowledge Base and Knowledge Base community.arubanetworks.com North American Telephone 1-‐800-‐943-‐4526 (Toll Free) 1-‐408-‐754-‐1200 International Telephones http://www.arubanetworks.
1. AirGroup Configuration How-‐to with ClearPass 6.0.1 The purpose of this document is to walk through how-‐to setup AirGroup configuration with ClearPass 6.0.1. This document will use the Integrated Deployment Model. Assumptions: 1. 2. 3. 4. 5. 6. 7.
Figure 1 Configuring a UDP port for AirGroup’s RFC 3576 Click on Server Group under Airgroup AAA profile. Select the ClearPass 6 server group that was created in the Aruba Wireless and ClearPass 6 Integration Guide. Figure 2 ClearPass 6 server group previously created Click Apply.
Figure 3 Airgroup AAA profile RFC 3576 server Again, use the RFC 3576 server that points to ClearPass 6 which was created in the previous setup guide. Click Apply. Step 2: ClearPass Setup Open up ClearPass Guest and navigate to Administration-‐>AirGroup Services. Click ‘Configure AirGroup Services’.
Figure 5 Add a new controller for AirGroup Services Enter the appropriate information. Note: The port used in these setup instructions is 21234 and the shared secret was configured in the previous setup guide (where aruba123 was used as an example). Figure 6 Configure AirGroup Services controller settings Click Save Configuration.
Figure 7 Configuration -‐>Identity-‐>Local Users selection Click Add User. Figure 8 Adding a new Local User in CPPM Create an AirGroup Administrator: AirGroup Configuration How-To with ClearPass 6.0.
Figure 9 Create an AirGroup Administrator In this example, as in past documentation, the password used is test123. Click Add. Now click Add User, and create an AirGroup Operator: Figure 10 Create an AirGroup Operator Click Add to save the ‘AirGroup Operator’ login.
Figure 11 Local Users GUI screen Navigate to the ClearPass Guest GUI and click the Logout button so that you are presented with the ClearPass Guest Login page. Enter the airgroup-‐admin login and password. Click on Create Device. Figure 12 Create a device The following page is displayed: AirGroup Configuration How-To with ClearPass 6.0.
Figure 13 Register Shared Device For testing purposes, add your test AppleTV device name and MAC address; but leave the other fields blank. Click Register Shared Device. 16 | AirGroup Configuration How-To with ClearPass 6.0.
Testing Disconnect your AppleTV and OSX Mountain Lion/iOS 6 devices if they were previously connected to the wireless network. Remove their entries from the controller’s user table as follows: Find the MAC address “show user table” Delete them from the table “aaa user delete mac 00:aa:22:bb:33:cc” Reconnect both devices.
Troubleshooting Problem: Limiting devices has no affect. Solution: Make sure that IPv6 is disabled. Problem: OSX Laptop running Mountain Lion can AirPlay to the AppleTV, but iOS devices cannot. Solution: Make sure that IPv6 is disabled. 18 | AirGroup Configuration How-To with ClearPass 6.0.