Reference Guide

Integrating Dell PowerConnect W-AirWave 7.5
AMP with Centralized NMS Event Correlation
0511042-02 | Aug 2012 1
Overview
This document describes AirWave’s alert/trap workflow when integrating with a centralized NMS Event
Correlation System, using the following topics:
 “Adding NMS Event Correlation Servers to AirWave” on page1
 “Configuring Alerts/Traps in AirWave” on page2
 “Viewing Alerts in Various Destinations” on page2
 “Acknowledging Alerts” on page3
 “Compiling the AirWave MIB on NMS” on page3
 “Matching Severity in the NMS Event Correlation Servers” on page4
 “Enhanced Integration” on page4
 “Actual MIB” on page4
Adding NMS Event Correlation Servers to AirWave
To add a event correlation server to the AirWave Management Platform (AMP):
1. Navigate to AMP Setup > NMS and click Add.
2. Configure server settings.
Figure 1 AMP Setup > NMS Page Illustration