Reference Guide

ManualsBrandsDell ManualsAccess PlatformsW-Airwave

0511090-05 | Jan 2013 1

Dell PowerConnect W-AirWave 7.6

Supported Infrastructure Devices

Dell PowerConnect W-AirWave provides a range of features to manage network infrastructure devices from Dell

PowerConnect W-Series and other vendors. This document describes the supported product families, software

versions, and feature set for the following product sets:

l "Wireless LAN APs and Controllers" on page 1

n Dell PowerConnect W-Series

n Cisco

n Motorola

l "Wired Ethernet Switches" on page 3

l "Other Devices with Monitoring Support" on page 3

Wireless LAN APs and Controllers

Dell PowerConnect W-Series

Dell PowerConnect W-AirWave supports all Dell PowerConnect W-Series controllers and most access points that

have not reached the End of Support milestone. .

Controllers running ArubaOS 6.1.3.x, 6.1.4.x FIPS, and all prior versions that have not reached the End of Support

milestone are supported by this version of AirWave, including the management of global configuration profiles and

software upgrades.

Dell PowerConnect W-Series Instant APs running software versions 6.1.3.1-3.0.0.x and prior are also supported,

including the management of configuration settings and software upgrades.

Cisco

Autonomous APs running IOS

The following IOS AP product families are supported for monitoring, configuration, and software upgrades:

Validated up to IOS 12.3(11)JA:

n 350 series

n 1100, 1130, 1140 series

Validated up to IOS 12.4(21a)JA1:

n 350, 1040, 1100, 1130, 1140, 1200, 1210, 1230, 1240, 1250, 1260 series

n 1300/1400 series bridges

n 871W (no software upgrade support), 881, 881GWAP, 891 series

Validated up to IOS 12.4(23c)JA2:

n 1941 series AP

Validated up to IOS 15.0(1)M7:

n 891W, 881W series

Validated up to IOS 15.1(4)M3:

Summary of content (5 pages)

PAGE 1
Dell PowerConnect W-AirWave 7.6 Supported Infrastructure Devices Dell PowerConnect W-AirWave provides a range of features to manage network infrastructure devices from Dell PowerConnect W-Series and other vendors.
PAGE 2
n 881GW series Validated up to IOS 15.2(3)T: n 1941W series Validated up to IOS 15.2(3)T2: n 880, 890, 1900 series Wireless LAN Controllers The following controllers and thin APs are supported for monitoring, configuration, and software upgrades: Validated up to software version 7.0.116.0 n Standalone 2000, 2100. 2500 (bootloader 1.0.
PAGE 3
Wired Ethernet Switches Any standalone Ethernet access switch that supports the standard SNMP MIB-II objects for wired switches can be monitored by AirWave. AirWave will collect the uptime and name/location/contact information for switches (or any device that supports SNMP). For port information, AirWave relies on the IF-MIB to collect byte counts.
PAGE 4
Device Supported Firmware HP ProCurve 530 WA.01.16-WA.02.19 HP 5406 zl Switch K.12.43 (ROM:K.12.12) HP WESM controllers & APs xl l zl l Juniper Switch 10.4R1.9 Meru MC1000, MC3000, MC5000 3.3-118 – 3.6.1-49 Proxim AP-600/700 Proxim AP 2000/4000 2.0 – 4.0.2 Proxim Tsunami MP.11 QB 954-x, 2454-x, 4954-x, 5054-x 2.3.0 – 4.0.0 Symbol 3021 04.01-23 – 04.02-19 Symbol 4121/4131 3.51-20 – 3.95-04 Symbol 5131/5181 1.1.0.0.045R – 2.5.0.
PAGE 5
Copyright © 2013 Aruba Networks, Inc. Aruba Networks trademarks include , Aruba Networks®, Aruba Wireless Networks®, the registered Aruba the Mobile Edge Company logo, and Aruba Mobility Management System®. Dell™, the DELL™ logo, and PowerConnect™ are trademarks of Dell Inc. All rights reserved. Specifications in this manual are subject to change without notice. Originated in the USA. All other trademarks are the property of their respective owners.