Users Guide

W-AirWave 8.2.4
Supported Infrastructure Devices
Dell Networking W-AirWave provides a range of features to manage network infrastructure devices from Dell and
other vendors. This document describes the supported product families, software versions, and feature set for
the following product sets:
l "Dell Devices" on page 1
l "Aruba Devices" on page 3
l "Third-Party Vendor Devices" on page 4
n "Cisco® Devices" on page 4
n "Hewlett Packard Enterprise Devices" on page 7
n "Juniper® Devices" on page 9
n "Meru® Devices" on page 10
n "Motorola® Devices" on page 11
l "Other Third-Party Devices with Monitoring Support" on page 11
l "Other Switches" on page 12
Dell Devices
W-AirWave supports management of global configuration profiles or settings, monitoring, and software
upgrades on Dell devices and software that are running Dell AOS 6.5.0.0, 6.5.1.0, 6.5.2.0. W-AirWave supports
only monitoring on Dell devices running Dell AOS 8.0.0. The sections that follow provide support matrices for
integration with Dell Networking W devices.
AOS
W-AirWave supports all Dell controllers and most access points that are running Dell AOS 6.5.0.0, 6.5.1.0,
6.5.2.0, 8.0.0.0, 8.0.1.0, and 8.1.0.0.
W-AirWave 8.2.4 introduces support for Dell unified APs; access points that are factory-installed with Dell AOS
6.5.2 or a later. A unified AP can be configured to operate as either a campus AP or a remote AP when that device
is first provisioned. For more information on Unified APs, refer to the Dell AOS 6.5.2 Release Notes.
Refer to http://www.arubanetworks.com/support-services/end-of-life/ for the complete list of products that
have reached the end-of-life milestone.
Device Validated up to
AP-365 and AP-367 6.5.2.0
W-AP334 and W-AP335 6.5.1.0
W-AP324 and W-AP325
6.5.1.0
W-AP304 and W-AP305 6.5.1.0
Table 1: Dell AOS Device Support
Dell Networking W-AirWave 8.2.4 | Supported Infrastructure Devices Rev. 01 | May 2017