Service Manual

Integrating Dell PowerConnect W-AirWave 7.4
AMP with Centralized NMS Event Correlation
0511042-01 | December 2011 1
Overview
This document describes AMP’s alert/trap workflow when integrating with a centralized NMS Event Correlation
System, using the following topics:
 “Adding NMS Event Correlation Servers to AMP” on page1
 “Configuring Alerts/Traps in AMP” on page1
 “Viewing Alerts in Various Destinations” on page2
 “Acknowledging Alerts” on page3
 “Compiling AMP’s MIB on NMS” on page3
 “Matching AMP’s Severity in the NMS Event Correlation Servers” on page3
 “Enhanced Integration” on page4
 “Actual MIB” on page4
Adding NMS Event Correlation Servers to AMP
1. Navigate to AMP Setup > NMS and click Add.
2. Configure server settings, as shown in Figure 1.
Figure 1 AMP Setup > NMS Page Illustration
Configuring Alerts/Traps in AMP
1. Navigate to Systems > Triggers, as shown in Figure 2.
2. Select one of the built-in Alerts/Traps.