Dell Networking W-7205 Controller Installation Guide
Copyright Information © 2015 Aruba Networks, Inc. Aruba Networks trademarks include , Aruba Networks®, Aruba Wireless Networks®, the registered Aruba the Mobile Edge Company logo, and Aruba Mobility Management System®. Dell™, the DELL™ logo, and PowerConnect™ are trademarks of Dell Inc. All rights reserved. Specifications in this manual are subject to change without notice. Originated in the USA. All other trademarks are the property of their respective owners.
Contents Contents 3 Preface 7 Guide Overview 7 Related Documentation 7 Contacting Dell 7 W-7205 Controller 9 Packaging Checklist 9 W-7205 Components 10 Dual-Media Ports 11 10/100/1000BASE-T (RJ-45) Ports 11 1000BASE-X (SFP) Ports 12 Dual-Media Port LEDs 12 10GBASE-X Ports SFP/SFP+ Modules and DAC Cables 13 14 USB Interface 15 Serial Console Port 15 Serial Console Port Adapter 16 Micro-USB Console Port 16 Micro-USB Driver 16 Management Port 16 Power, Status, and Peered
Grounding Point Installation 21 Precautions 21 Selecting a Location 22 Rack Mounting - Standard/Front 22 Required Tools and Equipment 22 Installation Steps 23 Rack Mount Installation- Mid 23 Required Tools and Equipment 24 Installation Steps 24 Table or Shelf Installation 25 Required Tools and Equipment 25 Installation Steps 25 Wall Mounting 25 Required Tools and Equipment 26 Installation Steps 26 Connecting and Disconnecting the AC Power Cord 27 Connecting the AC Power Cord
United States 32 Canada 32 Europe 33 Japan VCCI 33 Taiwan (BSMI) 33 South Korea 33 EU Regulatory Conformance 33 Battery Statements 33 Proper Disposal of Dell Equipment 34 Waste of Electrical and Electronic Equipment 34 China RoHS 34 European Union RoHS 34 India RoHS 35 Dell Networking W-7205 Controller | Installation Guide Contents | 5
Preface This document describes the hardware features of the Dell Networking W-7205 Controller. It provides a detailed overview of the physical and performance characteristics of the controller and explains how to install the controller and its accessories. Guide Overview l W-7205 Controller on page 9 provides a detailed hardware overview of the W-7205 controller and its components. l Installation on page 21 describes how to install the W-7205 controller and its components.
Chapter 1 W-7205 Controller The W-7205 Controller is a wireless LAN controller that connects, controls, and intelligently integrates wireless Access Points (APs) and Air Monitors (AMs) into a wired LAN system. There are two models of the W-7205 controller that do not differ physically or functionally from each other.
Table 3: Package Contents Item Quantity Power Cable 1 Micro-USB Cable 1 Rubber Feet 4 Installation Guide (this document, printed) 1 Quick Start Guide (Printed) 1 Dell Safety, Environment, and Regulatory Information (printed) 1 Dell Warranty and Support Information (printed) 1 Dell Software License Agreement (printed) 1 NOTE: Optional accessories are available for use with the Dell W-7205 controller and are sold separately. Contact your Dell sales representative for details and assistance.
The following table lists the different components of the W-7205 controller: Table 4: W-7205 Controller Components Component Description Page Dual-Media ports 4 x dual-media (10/100/1000BASE-T and 1000BASE-X) ports 11 10GBASE-X ports 2 x 10GBASE-X ports 13 USB interface Allows uploading configuration and image from a USB 2.0 storage device.
Figure 3 10/100/1000BASE-T Port Pin Out 1000BASE-X (SFP) Ports The W-7205 controller is equipped with four 1000BASE-X dual-media ports for fiber connectivity only and are intended for use with SFPs (mini-GBICs). Dual-Media Port LEDs Each port is equipped with two LEDs that allow basic monitoring of status, activity, and configuration of the port. l LINK/ACT— Placed above the port to the left, this LED displays the link status and activity of the port.
Table 6: 1000BASE-X Port LEDs LED Function LCD Mode Indicator Status STATUS Port status Administrative Green (Solid) Port enabled Off Port administratively disabled Green (Solid) Full-duplex Off NA Green (Solid) 1 Gbps Off NA Duplex Speed 10GBASE-X Ports The W-7205 controller is equipped with two 10GBASE-X (SFP+) ports (4 and 5). These ports are intended for use with SFP/SFP+ and support dual-speed (1GbE or 10GbE) operation.
Table 7: 10GBASE-X Port LEDs LED Function LCD Mode Indicator Status STATUS Port status Administrative Green (Solid) Port enabled Off Port administratively disabled Green (Solid) Full-duplex Off NA Green (Solid) 10 Gbps Off 1 Gbps Duplex Speed SFP/SFP+ Modules and DAC Cables SFP/SFP+ modules (purchased separately), also known as mini-GBICs are hot-swappable, provide optical or copper connections to other devices.
Table 8: Supported SFP/SFP+ Modules SFP/SFP+ Description SFP-10G-ER SFP+, 10GBASE-ER, 1310nm pluggable 10GE optic; up to 40,000 meters over single-mode fiber, LC connector SFP-10G-ZR SFP+, 10GBASE-ZR, 1310nm pluggable 10GE optic; up to 70,000 meters over single-mode fiber, LC connector Table 9: Supported DAC Cables DAC Description DAC-SFP-10GE-50CM 50cm Direct Attach Cable; 10G SFP+ DAC-SFP-10GE-1M 1m Direct Attach Cable; 10G SFP+ DAC-SFP-10GE-3M 3m Direct Attach Cable; 10G SFP+ DAC-SFP-10GE-5
CAUTION: The Console port is compatible only with RS-232 devices. Non-RS-232 devices, such as APs, are not supported. CAUTION: Do not connect the Console port to an Ethernet switch or a PoE power source. This may damage the controller. ATTENTION: Le port CONSOLE est compatible uniquement avec les périphériques RS-232. Les périphériques qui ne sont pas de type RS-232, notamment les points d’accès, ne sont pas pris en charge.
Power, Status, and Peered LEDs The front panel of the controller also includes Power, Status, and Peered LEDs (see Figure 4) that provide basic monitoring of the overall status of the controller.
Table 13: LCD Panel Mode LCD Mode Status Maintenance Function Displays the ArubaOS version.
CPU Module The W-7205 controller is equipped with a pre-installed CPU module on the back panel of the controller. NOTE: Do not remove the CPU module unless directed by an authorized Dell technician. The CPU module is not hot-swappable. For LED behavior on the CPU module, see Table 14.
Chapter 2 Installation This chapter describes how to install a W-7205 controller using the different mounting options available. The W7205 controller ships with an accessory kit that includes the equipment needed to mount the controller in a standard two-post 19-inch Telco rack. CAUTION: Only use the included or Dell specified cables, power cords, AC power supplies, and batteries. The power cord should not be used with other electric equipment than what is specified by Dell.
Selecting a Location The W-7205 controller, like other networking and computing devices, requires the following “electronic-friendly” environment: l Reliable power n l l l Verify that the electrical outlet is compatible with the W-7205 controller power supply. Cool, non-condensing ventilation n For proper operation, the W-7205 controller requires an environment with an ambient air temperature between 0º C and 40º C (32º F and 104º F).
Installation Steps To install a W-7205 controller from the front in a standard two-post 19-inch Telco rack: 1. Place the mounting brackets over the mounting holes near the front on either sides of the controller (see Figure 7). Figure 7 Attaching the Mounting Brackets 2. Secure the brackets to the controller using the eight screws for the mounting bracket (four per bracket) and a suitable screwdriver. 3.
ATTENTION: Chaque contrôleur W-7205 doit disposer de son propre équipement de montage. Veillez à ne placer aucun autre équipement réseau directement sur un contrôleur W-7205 installé. Dans le cas contraire, vous risqueriez d’endommager le périphérique.
Figure 10 Mid-Mount Rack Installation NOTE: Leave a minimum of 10 cm (4 inches) of space on the left and right side of the controller for proper air flow and ventilation. Leave additional space in the front and the back of the controller to access network cables, LED status indicators, and power cord. Table or Shelf Installation Required Tools and Equipment l Rubber feet (included in the package) Installation Steps 1. Attach the rubber feet to the bottom of the controller (see Figure 11). 2.
Required Tools and Equipment The following tools and equipment are required for installing the W-7205 controller on a wall: l Wall-mount brackets (x2) (included in the mounting accessory kit) l Screws for the mounting bracket (x8): M4 x 8 mm Phillips Flat Head Screws l Wall anchors: Optional (not included in the package) l Wall-mount screws (not included in this package, the type of screw depends on the installation surface) l Suitable screwdrivers (not included in the package) Installation Steps
Figure 13 Wall-Mount Installation Connecting and Disconnecting the AC Power Cord Once the controller is installed, it is ready to be powered on. The W-7205 controller is not equipped with an On/Off switch. The controller will power On when the AC power cord is connected to the AC power connector and an AC power outlet. Connecting the AC Power Cord To connect the AC power cord to the W-7205 controller: 1. Lift the power cord retaining clip so that it is not blocking the AC power connector. 2.
Disconnecting the AC Power Cord To disconnect the AC power cord from the W-7205 controller: 1. Lift the power cord retaining clip off the AC power cord. 2. Pull the AC power cord from the AC connector. 3. The W-7205 controller is now turned Off. Installing an SFP/SFP+ Module NOTE: Use standard ESD precautions when installing or removing an SFP/SFP+ module. To install an SFP/SFP+ module into the W-7205 controller: 1.
Figure 15 Connecting an LC Fiber Optic Cable Disconnecting an LC Fiber Optic Cable To disconnect an LC fiber optic cable from an SFP-SX or SFP-LX module: 1. Depress the transceiver handle to release the latch on the cable and simultaneously pull the cable out of the port. Removing an SFP/SFP+ Module To remove an SFP/SFP+ module: 1. Open and release the latch on the SFP/SFP+ module. 2. Pull and remove the module from the port.
Chapter 3 Specifications, Safety, and Compliance W-7205 Specifications Physical l Device Dimensions (without mounting brackets) (HxWxD): 1.72” x 17.40” x 13.15” (4.37 cm x 44.2 cm x 33.40 cm) l Device Weight: 10.912 lbs (4.95 kgs) Power Supply Specifications l 180 W AC Power Supply n AC Input Voltage: 100 VAC to 240 VAC n AC Input Current: 2.
CAUTION: Use of controls or adjustments of performance or procedures other than those specified in this manual may result in hazardous radiation exposure. ATTENTION: L’utilisation de commandes ou de réglages de performances ou de procédures qui ne sont pas spécifiées dans ce manuel risque d’entraîner une exposition à des rayonnements dangereux. This product complies with 21 CFR Chapter 1, Subchapter J, Part 1040.10, and IEC 60825-1: 1993, A1: 1997, A2: 2001, IEC 60825-2: 2004+A1.
Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux appareils numériques de Classe A prescrites dans la norme sur le matériel brouilleur: “Appareils Numériques,” NMB-003 édictée par le ministère des Communications. Europe CAUTION: This is a Class A product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures. ATTENTION: Produit de classe A.
ATTENTION: La batterie fournie avec ce produit peut contenir du perchlorate. Des précautions de manipulation peuvent s’appliquer dans l’État de Californie et dans d’autres états/pays. Consultez la page www.dtsc.ca.gov/hazardouswaste/perchlorate pour plus d’informations. WARNING: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. WARNING: Risque d’explosion si la batterie est remplacée par une batterie de type incorrect.
packaging will be marked with the “RoHS” label shown at the left indicating conformance to this Directive. India RoHS This product complies with RoHS requirements as prescribed by E-Waste (Management & Handling) Rules, governed by the Ministry of Environment & Forests, Government of India.
| Specifications, Safety, and Compliance Dell Networking W-7205 Controller | Installation Guide