Dell PowerConnect W-Series ArubaOS 5.
Copyright © 2010 Aruba Networks, Inc. AirWave®, Aruba Networks®, Aruba Mobility Management System®, and other registered marks are trademarks of Aruba Networks, Inc. Dell™, the DELL™ logo, and PowerConnect™ are trademarks of Dell Inc. All rights reserved. Specifications in this manual are subject to change without notice. Originated in the USA. Any other trademarks appearing in this manual are the property of their respective companies.
Contents Preface.....................................................................................................................................................................13 An Overview of This Manual .......................................................................................................... 13 Contents ............................................................................................................................................. 13 Related Documents....................
Chapter 4 Authentication..................................................................................................................103 wlsxAuthenticationServerTable .................................................................................................. 104 wlsxPortalServerTable .................................................................................................................. 108 wlsxLdapServerStateTable.......................................................................
Chapter 10 Signal Noise Ratio ...........................................................................................................215 wlsxAPSnrTable ............................................................................................................................. 216 wlsxStaSnrTable............................................................................................................................. 218 wlsxAPSnrBSSIDTable.............................................................
wlsxUserStatsGroup ...................................................................................................................... 444 Chapter 16 User6..................................................................................................................................447 wlsxUser6AllInfoGroup.................................................................................................................. 448 wlsxUser6Table ...............................................................
Tables Table 1 Table 2 Table 3 Table 4 Table 5 Table 6 Table 7 Table 8 Table 9 Table 10 Table 11 Table 12 Table 13 Table 14 Table 15 Table 16 Table 17 Table 18 Table 19 Table 20 Table 21 Table 22 Table 23 Table 24 Table 25 Table 26 Table 27 Table 28 Table 29 Table 30 Table 31 Table 32 Table 33 Table 34 Table 35 Table 36 Table 37 Table 38 Table 39 Table 40 Table 41 Table 42 Table 43 Table 44 Conventions..........................................................................................................
Table 45 Table 46 Table 47 Table 48 Table 49 Table 50 Table 51 Table 52 Table 53 Table 54 Table 55 Table 56 Table 57 Table 58 Table 59 Table 60 Table 61 Table 62 Table 63 Table 64 Table 65 Table 66 Table 67 Table 68 Table 69 Table 70 Table 71 Table 72 Table 73 Table 74 Table 75 Table 76 Table 77 Table 78 Table 79 Table 80 Table 81 Table 82 Table 83 Table 84 Table 85 Table 86 Table 87 Table 88 Table 89 Table 90 Table 91 Table 92 Table 93 Table 94 8 | wlsxMonApStatsTable OIDs................................
Table 95 Table 96 Table 97 Table 98 Table 99 Table 100 Table 101 Table 102 Table 103 Table 104 Table 105 Table 106 Table 107 Table 108 Table 109 Table 110 Table 111 Table 112 Table 113 Table 114 Table 115 Table 116 Table 117 Table 118 Table 119 Table 120 Table 121 Table 122 Table 123 Table 124 Table 125 Table 126 wlsxUserSessionTimeTable OIDs................................................................................................ 443 wlsxUserStatsGroup OIDs ..........................................
| Dell PowerConnect ArubaOS 5.
Figures Figure 1 Figure 2 Figure 3 Figure 4 Figure 5 Figure 6 Figure 7 Figure 8 Figure 9 Figure 10 Figure 11 Figure 12 Figure 13 Figure 14 Figure 15 Figure 16 Figure 17 Figure 18 Figure 19 High-Level MIB Hierarchy .............................................................................................................. 20 CLI Interface...................................................................................................................................... 23 Graphical User Interface........
| Dell PowerConnect ArubaOS 5.
Preface An Overview of This Manual This guide is geared toward network administrators and operators responsible for managing the Dell controller. Contents This guide provides information about ArubaOS MIBs. Unless otherwise stated in the following table, each chapter provides information about the hierarchy, OIDs, and descriptions of the statistical information the MIBs provide.
Chapter Contents Chapter 14 Traps Descriptions of traps, information that is delivered when an event occurs. Chapter 15 User Information about users—parties connected to the switch. Chapter 16 User6 Information about IPv6 users—parties connected to the switch that are using IPv6 Chapter 17 Voice Information about Voice over IP—call status and call details. Chapter 18 WLAN Information about wide local area network (WLAN).
Table 2 Frequently Used Acronyms (Continued) Acronym Definition ADP ArubaOS Discovery Protocol AM Air Monitor AP Access Point ARM Adaptive Radio Management BSSID Basic Service Set Identifier CA Certificate Authority CAC Call Admission Control CHAP Challenge Handshake Authentication Protocol CLI Command Line Interface CRL Certificate Revocation List CSA Channel Switch Announcement CSR Certificate Signing Request CW Contention Window DA Destination Address DES Data Encryption St
Table 2 Frequently Used Acronyms (Continued) 16 | Preface Acronym Definition IV Initialization Vectors kB Kilobyte LAN Local Area Network LDAP Lightweight Directory Access Protocol LI Listening Interval MAC Media Access Control MB Megabyte MCHAP Microsoft Challenge Handshake Authentication Protocol MIB Management Information Base NAS Network Address Server NAT Network Address Translation NIC Network Interface Card NTP Network Time Protocol OFDM Orthogonal Frequency Division Mu
Table 2 Frequently Used Acronyms (Continued) Acronym Definition TLS Transport Layer Security ToS Type of Service TSPEC Traffic Specification VLAN Virtual Local Area Network VoIP Voice over IP VPN Virtual Private Network VRRP Virtual Router Redundancy Protocol VSA Vendor Specific Attributes WEP Wired Equivalent Protocol WINS Windows Internet Naming Service WLAN Wireless Local Area Network WMM Wireless MultiMedia / Wi-Fi Multimedia WMS WLAN Management System WPA Wi-Fi Protected Ac
| Preface Dell PowerConnect ArubaOS 5.
Chapter 1 MIBs Overview This chapter provides an overview of the ArubaOS Enterprise MIBs in the following sections: z MIBs z SNMP z Traps MIBs A Management Information Base (MIB) is a virtual database that contains information that is used for network management. Each managed device contains MIBs that define the properties of that device.
Figure 1 High-Level MIB Hierarchy IS O (1) 1 OR G (3) 1.3 DOD (6) 1.3.6 Internet (1) 1.3.6.1 Directory (1) Management (2) E xperimental (4) 1.3.6.1.1 1.3.6.1.2 1.3.6.1.3 Private (4) 1.3.6.1.4 E nterprises (1) 1.3.6.1.4.1 Dell (674) Aruba (14823) 1.3.6.1.4.1.674 1.3.6.1.4.1.14823 MIB is one of the elements of Simple Network Management Protocol (SNMP), which is used to manage network devices.
z MIBs are used for communication between the Managers and the Agents. The OIDs of the MIBs enable the Managers and Agents to communicate specific data requests and data returns. z To ensure functionality with SNMP, MIB objects must be defined with the proper keywords, as shown in Table 4. ArubaOS Enterprise MIBs support SNMPv1, SNMPv2, and SNMPv3. Table 4 MIB Keywords Keyword Description Sequence The sequence of objects of the MIB.
z Terminal Server Function The terminal server function enables connection to remote-site serial devices. For example, device connection to serial ports enables telnet access via LAN. ArubaOS traps are described in the following chapter and sections.
Chapter 2 Using MIBs This chapter provides information on and examples of using MIBs. z Downloading MIB Files z Monitoring WLAN Health z Reading MIB Files z SNMP File z HP OpenView z MIB Limitations Downloading MIB Files The most recent Dell MIB files are available for registered customers at: http://www.support.dell.com For assistance to set up an account and access files, please contact customer service. See “” on page 17.
Figure 3 shows how information may be obtained through a graphical user interface ( GUI). The user interface and the available features vary by application. Figure 3 Graphical User Interface WLAN Health Information This sections lists frequently used MIBs for system health checks. Examples of executing a command via CLI are also provided. Health check information can be acquired through other MIB browsers, as described in “MIB Browsers” on page 23 .
z Frame Low-Speed Rate per AP BSSID z SNR of Wireless Devices per AP z Frame Receive Error Rate per AP BSSID z SNR of APs Number of Current Authentications per AP wlsxSwitchUserTable .1.3.6.1.4.1.14823.2.2.1.1.2.1 snmpwalk -v 2c -m ALL -c .1.3.6.1.4.1.14823.2.2.1.1.2.1 | grep -c Number of Current APs per Controller wlsxSwitchTotalNumAccessPoints .1.3.6.1.4.1.14823.2.2.1.1.3.
AP Information from Master Controller wlsxSwitchGlobalAPTable .1.3.6.1.4.1.14823.2.2.1.1.3.4 The following command retrieves the BSSIDs and local controller IP of each AP. snmpwalk -v 2c -m ALL -c .1.3.6.1.4.1.14823.2.2.1.1.3.4 Information from Any AP wlsrConfigTable .1.3.6.1.4.1.14823.2.3.1.1.1.
Frame Receive Errors per AP Channel This information is available from any Dell controller. apChannelFrameReceiveErrorRate .1.3.6.1.4.1.14823.2.2.1.1.3.5.1.7 snmpwalk -v 2c -c .1.3.6.1.4.1.14823.2.2.1.1.3.5.1.7 | grep "" Total Current Channel Bandwidth (kbps) per AP apChannelBwRate .1.3.6.1.4.1.14823.2.2.1.1.3.5.1.2 snmpwalk -v 2c -c .1.3.6.1.4.1.14823.2.2.1.1.3.5.1.
Free Memory sysXMemoryFree .1.3.6.1.4.1.14823.2.2.1.1.1.11.1.4 snmpget -v 2c -m ALL -c .1.3.6.1.4.1.14823.2.2.1.1.1.11.1.4.1 SNR of Wireless Devices per AP staSignalToNoiseRatio .1.3.6.1.4.1.14823.2.2.1.1.2.2.1.7 snmpwalk -v 2c -c .1.3.6.1.4.1.14823.2.2.1.1.2.2.1.7 | grep "" SNR of APs apSignalToNoiseRatio .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.
TAddress, TimeInterval, RowStatus, StorageType, TestAndIncr, MacAddress, TruthValue FROM SNMPv2-TC OBJECT-GROUP FROM SNMPv2-CONF Inheritance This section shows the vendor of the MIB and the inheritance, and provides an overall description. A significant part of inheritance is the OID. The entire OID is not listed for each MIB object—instead, the parent of the object is shown. The tree for the CTS MIB is illustrated in Figure 4 on page 32. The OID can be determined from the parent object as follows.
MIB Modules MIB objects can be placed in logical groups, Group and Table. One MIB file can consist of multiple groups. A group typically contains at least one table. The table lists the MIB objects that contain the information that is exchanged. The first object of a table is an Entry. The keyword SEQUENCE lists the objects of the table that contain device information.
DESCRIPTION " CTS transport index 0 - Config Sync 1 - Counters Sync 2 - RF Plan Sync " ::= { wlsxCtsRequestEntry 1 } wlsxCtsOpcode OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUScurrent DESCRIPTION " CTS operation opcode " ::= { wlsxCtsRequestEntry 2 } wlsxCtsStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUScurrent DESCRIPTION " CTS row status " ::= { wlsxCtsRequestEntry 6 } Closing Line Following is the closing line—the end of the MIBs file. END Dell PowerConnect ArubaOS 5.
OID Flow Chart Figure 4 illustrates the tree of the CTS MIB, relative to the Dell MIB. Figure 4 CTS OIDs Relative to Dell 1.3.6.1.4.1.14823 Aruba Aruba Enterprise MIB Modules 1.3.6.1.4.1.14823.2 Switch 1.3.6.1.4.1.14823.2.2 1.3.6.1.4.1.14823.2.2.1 wlsx MIB Modules wlsx CTS 1.3.6.1.4.1.14823.2.2.1.11 wlsx CTS Op Group wlsx CTS Request Table 1.3.6.1.4.1.14823.2.2.1.11.1 1.3.6.1.4.1.14823.2.2.1.11.1.1 SNMP File The snmp.h file lists the OIDs of all MIBs. Following are sections from snmp.
{ "wlsxEnterpriseMibModules", HASHNEXT("1.3.6.1.4.1.14823.2.2.1") }, The following rows list the CTS MIB OIDs. { "wlsxCtsMIB", HASHNEXT("1.3.6.1.4.1.14823.2.2.1.11") }, { "wlsxCtsOpGroup", HASHNEXT("1.3.6.1.4.1.14823.2.2.1.11.1") }, { "wlsxCtsRequestTable", HASHNEXT("1.3.6.1.4.1.14823.2.2.1.11.1.1") }, { "wlsxCtsRequestEntry", HASHNEXT("1.3.6.1.4.1.14823.2.2.1.11.1.1.1") }, { "wlsxCtsIndex", HASHNEXT("1.3.6.1.4.1.14823.2.2.1.11.1.1.1.1")}, { "wlsxCtsOpcode", HASHNEXT("1.3.6.1.4.1.14823.2.2.1.
| Using MIBs Dell PowerConnect ArubaOS 5.
Chapter 3 AP and AM Note: All MIB tables in this chapter have been deprecated and are no longer supported. The AP and AM module provides information about access points and air monitors. The access point (AP) is a device or an application that connects the wireless client to a local area network (LAN). APs continually poll the network and report information to the controllers.
Figure 5 Access Point Air Module Hierarchy 1.3.6.1.4.1.14823 Aruba Aruba Ap 1.3.6.1.4.1.14823.2.3 wisr E nterprise Mib Modules wisr MIB 1.3.6.1.4.1.14823.2.3.1 1.3.6.1.4.1.14823.2.3.1.1 1.3.6.1.4.1.14823.2.3.1.1.100 wisr Traps Group 1.3.6.1.4.1.14823.2.3.1.1.100.100 wisr Trap Objects Group 1.3.6.1.4.1.14823.2.3.1.1.1 wisr C onfig Group wisr C onfig Table 1.3.6.1.4.1.14823.2.3.1.1.1.1 wisr S tats Group 1.3.6.1.4.1.14823.2.3.1.1.3 1.3.6.1.4.1.14823.2.3.1.1.3.
wlsrEnterpriseMibModules The AP MIB contains several tables, which are listed and summarized in Table 6. The objects of each table are described in the following sections. Table 6 AP Tables Table Description wlsrConfigTable This table lists the configuration data of an access point. Each row in the table represents a WiFi interface. wlsrChannelStatsTable This table lists channel statistics. wlsrChannelRateStatsTable This table lists channel statistics that are sorted per data rate.
Table 7 wlsrConfigTable OIDs (Continued) Object Object ID wlsrSupportedRates 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.12 wlsrConfigEntry 12 wlsrDTIMPeriod 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.13 wlsrConfigEntry 13 wlsrLMSAddress 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.14 wlsrConfigEntry 14 wlsrEncryption 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.15 wlsrConfigEntry 15 wlsrStatus 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.17 wlsrConfigEntry 17 wlsrAgeout 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.18 wlsrConfigEntry 18 wlsrMTU 1.3.6.1.4.1.
wlsrESSID Syntax DisplayString (Size(0..64)) Max-Access read-only Status current Description ESSID of the WiFi Interface. wlsrMode Syntax Integer master(1) adhoc(2) monitor(3) Max-Access read-only Status current Description Mode of the access point. Master indicates that we are operating as access point. Monitor indicates that the access point is an air monitor. wlsrCurrentChannel Syntax Integer (1..
wlsrRTSThreshold Syntax Integer (0..2347) Max-Access read-only Status current Description This attribute shall indicate the number of octets in an MPDU, below which an RTS/CTS handshake shall not be performed. wlsrRetryLimit Syntax Integer (1..
wlsrLoadBalance Syntax Integer enable(1) disable(2) Max-Access read-only Status current Description This attribute indicates if load balancing is enabled or disabled.
wlsrLMSAddress Syntax IpAddress Max-Access read-only Status current Description The IP Address of the local switch that the access point is connected to. wlsrEncryption Syntax Bits unused0(0) unused1(1) unused2(2) unused3(3) unused4(4) unused5(5) unused6(6) xSec(7) wpa2PreAuth(8) aes8021x(9) aesPSK(10) dynamicTkip(11) staticTkip(12) dynamicWep(13) staticWep(14) disabled(15) Max-Access read-only Status current Description The encryption type of the WiFi interface.
wlsrMTU Syntax Integer (0..2347) Max-Access read-only Status current Description The MTU of the WiFi Interface. wlsrLocation Syntax DisplayString (Size(0..32)) Max-Access read-only Status current Description The location of the access point in Building.Floor.location format. wlsrHideSSID Syntax TruthValue Max-Access read-only Status current Description This attribute indicates if SSID is hidden or not.
wlsrCardType Syntax Integer noCard(1) intersil(2) atherosA(3) atherosBG(4) atherosABG(5) ar5212A(10) ar5212BG(11) ar5212ABG(12) Max-Access read-only Status current Description Indicates the type of the radio card. wlsrRegDomain Syntax Integer32 Max-Access read-only Status deprecated Description This object represents the configured regulatory domain of which country this AP will adhere to. See Table 8.
wlsrCountryCode Syntax DisplayString (Size(0..64)) Max-Access read-only Status current Description This object represents the configured country code. wlsrTxRates Syntax Bits {unused0(0) unused1(1) unused2(2) unused3(3) rate54Mbps(4) rate48Mbps(5) rate36Mbps(6) rate24Mbps(7) rate18Mbps(8) rate12Mbps(9) rate9Mbps(10) rate6Mbps(11) rate11Mbps(12) rate5Mbps(13) rate2Mbps(14) rate1Mbps(15) Max-Access read-only Status current Description Transmit Bit rates supported by this WiFi interface.
Table 9 wlsrChannelStatsTable OIDs (Continued) Object Object ID wlsrChStatsTotPhyErrPkts 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.8 wlsrChannelStatsEntry 8 wlsrChStatsTotMacErrPkts 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.9 wlsrChannelStatsEntry 9 wlsrChStatsFrameErrorRate 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.10 wlsrChannelStatsEntry 10 wlsrChStatsFrameRetryRate 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.11 wlsrChannelStatsEntry 11 wlsrChStatsFrameLowSpeedRate 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.
wlsrChStatsNumStations Syntax Integer32 Max-Access read-only Status current Description The number of stations using this channel. wlsrChStatsTotPkts Syntax Counter32 Max-Access read-only Status current Description The total packets observed on this channel. wlsrChStatsTotBytes Syntax Counter32 Max-Access read-only Status current Description The total bytes observed on this channel.
wlsrChStatsTotPhyErrPkts Syntax Counter32 Max-Access read-only Status current Description The total physical error packets observed on this channel. wlsrChStatsTotMacErrPkts Syntax Counter32 Max-Access read-only Status current Description The total MAC errors packets observed on this channel. wlsrChStatsFrameErrorRate Syntax Integer32 Max-Access read-only Status current Description Frame errors as a percentage of total frames on this channel.
wlsrChStatsFrameNonUnicastRate Syntax Integer32 Max-Access read-only Status current Description Frame non-unicast rate in kbps. wlsrChStatsFrameBandwidthRate Syntax Integer32 Max-Access read-only Status current Description Frame bandwidth rate in kbps. wlsrChStatsFrameFragmentationRate Syntax Integer32 Max-Access read-only Status current Description Frame fragmentation rate in kbps.
Table 10 wlsrChannelRateStatsTable OIDs (Continued) Object Object ID wlsrChStatsTotPktsAt2Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.3 wlsrChannelRateStatsEntry 3 wlsrChStatsTotBytesAt2Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.4 wlsrChannelRateStatsEntry 4 wlsrChStatsTotPktsAt5Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.5 wlsrChannelRateStatsEntry 5 wlsrChStatsTotBytesAt5Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.6 wlsrChannelRateStatsEntry 6 wlsrChStatsTotPktsAt11Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.
wlsrChStatsTotPktsAt1Mbps Syntax Counter32 Max-Access read-only Status current Description The total number of packets observed on this channel at 1 Mbps rate. wlsrChStatsTotBytesAt1Mbps Syntax Counter32 Max-Access read-only Status current Description The total number of bytes observed on this channel at 1 Mbps rate. wlsrChStatsTotPktsAt2Mbps Syntax Counter32 Max-Access read-only Status current Description The total number of packets observed on this channel at 2 Mbps rate.
wlsrChStatsTotBytesAt5Mbps Syntax Counter32 Max-Access read-only Status current Description The total number of bytes observed on this channel at 5 Mbps rate. wlsrChStatsTotPktsAt11Mbps Syntax Counter32 Max-Access read-only Status current Description The total number of packets observed on this channel at 11 Mbps rate. wlsrChStatsTotBytesAt11Mbps Syntax Counter32 Max-Access read-only Status current Description The total number of bytes observed on this channel at 11 Mbps rate.
wlsrChStatsTotPktsAt12Mbps Syntax Counter32 Max-Access read-only Status current Description The total number of packets observed on this channel at 12 Mbps rate. wlsrChStatsTotBytesAt12Mbps Syntax Counter32 Max-Access read-only Status current Description The total number of bytes observed on this channel at 12 Mbps rate. wlsrChStatsTotPktsAt18Mbps Syntax Counter32 Max-Access read-only Status current Description The total number of packets observed on this channel at 18 Mbps rate.
wlsrChStatsTotBytesAt24Mbps Syntax Counter32 Max-Access read-only Status current Description The total number of bytes observed on this channel at 24 Mbps rate. wlsrChStatsTotPktsAt36Mbps Syntax Counter32 Max-Access read-only Status current Description The total number of packets observed on this channel at 36 Mbps rate. wlsrChStatsTotBytesAt36Mbps Syntax Counter32 Max-Access read-only Status current Description The total number of bytes observed on this channel at 36 Mbps rate.
wlsrChStatsTotPktsAt54Mbps Syntax Counter32 Max-Access read-only Status current Description The total number of packets observed on this channel at 54 Mbps rate. wlsrChStatsTotBytesAt54Mbps Syntax Counter32 Max-Access read-only Status current Description The total number of bytes observed on this channel at 54 Mbps rate.
wlsrChStatsTotDABroadcastPkts Syntax Counter32 Max-Access read-only Status current Description The total number of broadcast packets observed on this channel. wlsrChStatsTotDABroadcastBytes Syntax Counter32 Max-Access read-only Status current Description The total number of broadcast bytes observed on this channel. wlsrChStatsTotDAMulticastPkts Syntax Counter32 Max-Access read-only Status current Description The total number of multicast packets observed on this channel.
wlsrChStatsTotDAUnicastBytes Syntax Counter32 Max-Access read-only Status current Description The total number of unicast bytes observed on this channel. wlsrChannelFrameTypeStatsTable The objects of the wlsr Channel Frame Type Statistics table provide information on package and byte counts per channel, which are sorted by frame type. Table 12 wlsrChannelFrameTypeStatsTable OIDs Object Object ID wlsrChannelFrameTypeStatsEntry 1.3.6.1.4.1.14823.2.3.1.1.3.3.3.
wlsrChStatsTotMgmtBytes Syntax Counter32 Max-Access read-only Status current Description The total number of management bytes observed on this channel. wlsrChStatsTotCtrlPkts Syntax Counter32 Max-Access read-only Status current Description The total number of control packets observed on this channel. wlsrChStatsTotCtrlBytes Syntax Counter32 Max-Access read-only Status current Description The total number of control bytes observed on this channel.
The objects of the wlsr Channel Packet Size Statistics table provide channel statistics that are grouped by packet size. Table 13 wlsrChannelPktSizeStatsTable OIDs Object OID wlsrChannelPktSizeStatsEntry 1.3.6.1.4.1.14823.2.3.1.1.3.3.4.1 wlsrChannelPktSizeStatsTable 1 wlsrChStatsPkts63Bytes 1.3.6.1.4.1.14823.2.3.1.1.3.3.4.1.1 wlsrChannelPktSizeStatsEntry 1 wlsrChStatsPkts64To127 1.3.6.1.4.1.14823.2.3.1.1.3.3.4.1.2 wlsrChannelPktSizeStatsEntry 2 wlsrChStatsPkts128To255 1.3.6.1.4.1.14823.2.3.1.1.
wlsrChStatsPkts128To255 Syntax Counter32 Max-Access read-only Status current Description The total number of packets that were between 128 and 255 bytes long. wlsrChStatsPkts256To511 Syntax Counter32 Max-Access read-only Status current Description The total number of packets that were between 256 and 511 bytes long. wlsrChStatsPkts512To1023 Syntax Counter32 Max-Access read-only Status current Description The total number of packets that were between 512 and 1023 bytes long.
Table 14 wlsrStaStatsTable OIDs (Continued) Object Object ID wlsrStaRxPkts 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.4 wlsrStaStatsEntry 4 wlsrStaRxBytes 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.5 wlsrStaStatsEntry 5 wlsrStaTxRetryPkts 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.6 wlsrStaStatsEntry 6 wlsrStaRxRetryPkts 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.7 wlsrStaStatsEntry 7 wlsrStaTxFragmentedPkts 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.8 wlsrStaStatsEntry 8 wlsrStaRxFragmentedPkts 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.
wlsrStaAddress Syntax MacAddress Max-Access not-accessible Status current Description The MAC Address of the station connected to this access point. wlsrStaTxPkts Syntax Counter32 Max-Access read-only Status current Description The total packets transmitted to the station. wlsrStaTxBytes Syntax Counter32 Max-Access read-only Status current Description The total bytes transmitted to the station.
wlsrStaTxRetryPkts Syntax Counter32 Max-Access read-only Status current Description The retry packets transmitted by the station wlsrStaRxRetryPkts Syntax Counter32 Max-Access read-only Status current Description The retry packets received from the station. wlsrStaTxFragmentedPkts Syntax Counter32 Max-Access read-only Status current Description The fragmented packets transmitted by the station.
wlsrStaTxTotSignal Syntax Integer32 Max-Access read-only Status current Description The attribute indicates the total transmitted signal computed for this station. wlsrStaTxSignalPkts Syntax Counter32 Max-Access read-only Status current Description The total signal packets transmitted by this station. wlsrStaTxCurSignal Syntax Integer32 Max-Access read-only Status current Description This attribute indicate the station’s current transmit signal strength.
wlsrStaRxNoisePkts Syntax Counter32 Max-Access read-only Status deprecated Description Received noise. wlsrStaRxCurrentNoise Syntax Integer32 Max-Access read-only Status deprecated Description Current noise. wlsrStaRxHighNoise Syntax Integer32 Max-Access read-only Status deprecated Description High noise. wlsrStaRxLowNoise Syntax Integer32 Max-Access read-only Status deprecated Description Low noise.
wlsrStaFrameLowSpeedRate Syntax Integer32 Max-Access read-only Status current Description Station frame low speed error rate in kbps. wlsrStaFrameNonUnicastRate Syntax Integer32 Max-Access read-only Status current Description Station frame non-unicast rate in kbps. wlsrStaFrameRetryErrorRate Syntax Integer32 Max-Access read-only Status current Description Station frame retry error rate in kbps.
wlsrStaFrameHighBandwidthRate Syntax Integer32 Max-Access read-only Status current Description Station frame high bandwidth rate in kbps. wlsrStaRateStatsTable The objects of the wlsr Station Rate Statistics table provide information on channel packet and byte counts per channel. The information is grouped by data transfer rate. Table 15 wlsrStaRateStatsTable OIDs Object Object ID wlsrStaRateStatsEntry 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1 wlsrStaRateStatsTable 1 wlsrStaTxPktsAt1Mbps 1.3.6.1.4.1.
Table 15 wlsrStaRateStatsTable OIDs (Continued) Object Object ID wlsrStaRxBytesAt1Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.24 wlsrStaRateStatsEntry 24 wlsrStaRxPktsAt2Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.25 wlsrStaRateStatsEntry 25 wlsrStaRxBytesAt2Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.26 wlsrStaRateStatsEntry 26 wlsrStaRxPktsAt5Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.27 wlsrStaRateStatsEntry 27 wlsrStaRxBytesAt5Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.
wlsrStaTxPktsAt1Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets transmitted by the station at 1 Mbps rate. wlsrStaTxBytesAt1Mbps Syntax Counter32 Max-Access read-only Status current Description The number of octets transmitted by the station at 1 Mbps rate. wlsrStaTxPktsAt2Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets transmitted by the station at 2 Mbps rate.
wlsrStaTxBytesAt5Mbps Syntax Counter32 Max-Access read-only Status current Description The number of octets transmitted by the station at 5 Mbps rate. wlsrStaTxPktsAt11Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets transmitted by the station at 11 Mbps rate. wlsrStaTxBytesAt11Mbps Syntax Counter32 Max-Access read-only Status current Description The number of octets transmitted by the station at 11 Mbps rate.
wlsrStaTxPktsAt12Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets transmitted by the station at 12 Mbps rate. wlsrStaTxBytesAt12Mbps Syntax Counter32 Max-Access read-only Status current Description The number of octets transmitted by the station at 12 Mbps rate. wlsrStaTxPktsAt18Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets transmitted by the station at 18 Mbps rate.
wlsrStaTxBytesAt24Mbps Syntax Counter32 Max-Access read-only Status current Description The number of octets transmitted by the station at 24 Mbps rate. wlsrStaTxPktsAt36Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets transmitted by the station at 36 Mbps rate. wlsrStaTxBytesAt36Mbps Syntax Counter32 Max-Access read-only Status current Description The number of octets transmitted by the station at 36 Mbps rate.
wlsrStaTxPktsAt54Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets transmitted by the station at 54 Mbps rate. wlsrStaTxBytesAt54Mbps Syntax Counter32 Max-Access read-only Status current Description The number of octets transmitted by the station at 54 Mbps rate. wlsrStaRxPktsAt1Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets received by the station at 1 Mbps rate.
wlsrStaRxBytesAt2Mbps Syntax Counter32 Max-Access read-only Status current Description The number of octets received by the station at 2 Mbps rate. wlsrStaRxPktsAt5Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets received by the station at 5 Mbps rate. wlsrStaRxBytesAt5Mbps Syntax Counter32 Max-Access read-only Status current Description The number of octets received by the station at 5 Mbps rate.
wlsrStaRxPktsAt6Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets received by the station at 6 Mbps rate. wlsrStaRxBytesAt6Mbps Syntax Counter32 Max-Access read-only Status current Description The number of octets received by the station at 6 Mbps rate. wlsrStaRxPktsAt12Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets received by the station at 12 Mbps rate.
wlsrStaRxBytesAt18Mbps Syntax Counter32 Max-Access read-only Status current Description The number of octets received by the station at 18 Mbps rate. wlsrStaRxPktsAt24Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets received by the station at 24 Mbps rate. wlsrStaRxBytesAt24Mbps Syntax Counter32 Max-Access read-only Status current Description The number of octets received by the station at 24 Mbps rate.
wlsrStaRxPktsAt48Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets received by the station at 48 Mbps rate. wlsrStaRxBytesAt48Mbps Syntax Counter32 Max-Access read-only Status current Description The number of octets received by the station at 48 Mbps rate. wlsrStaRxPktsAt54Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets received by the station at 54 Mbps rate.
Table 16 wlsrStaDATypeStatsTable OIDs (Continued) Object OIDs wlsrStaTxDAMulticastBytes 1.3.6.1.4.1.14823.2.3.1.1.3.4.3.1.4 wlsrStaDATypeStatsEntry 4 wlsrStaTxDAUnicastPkts 1.3.6.1.4.1.14823.2.3.1.1.3.4.3.1.5 wlsrStaDATypeStatsEntry 5 wlsrStaTxDAUnicastBytes 1.3.6.1.4.1.14823.2.3.1.1.3.4.3.1.6 wlsrStaDATypeStatsEntry 6 wlsrStaDATypeStatsEntry Syntax wlsrStaDATypeStatsEntry Max-Access not-accessible Status current Description Station statistics based on the destination address.
wlsrStaTxDAMulticastBytes Syntax Counter32 Max-Access read-only Status current Description The number of multicast bytes transmitted by this station. wlsrStaTxDAUnicastPkts Syntax Counter32 Max-Access read-only Status current Description The total of unicast packets transmitted by this station. wlsrStaTxDAUnicastBytes Syntax Counter32 Max-Access read-only Status current Description The total of unicast bytes transmitted by this station.
Table 17 wlsrStaFrameTypeStatsTable OIDs (Continued) Object Object ID wlsrStaRxCtrlBytes 1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.10 wlsrStaFrameTypeStatsEntry 10 wlsStaRxDataPkts 1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.11 wlsrStaFrameTypeStatsEntry 11 wlsrStaRxDataBytes 1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.12 wlsrStaFrameTypeStatsEntry 12 wlsrStaFrameTypeStatsEntry Syntax wlsrStaFrameTypeStatsEntry Max-Access not-accessible Status current Description Station frame type statistics entry.
wlsrStaTxCtrlBytes Syntax Counter32 Max-Access read-only Status current Description The transmitted control bytes from a station. wlsrStaTxDataPkts Syntax Counter32 Max-Access read-only Status current Description The transmitted data packets from a station. wlsrStaTxDataBytes Syntax Counter32 Max-Access read-only Status current Description The transmitted data bytes observed on this channel.
wlsrStaRxCtrlPkts Syntax Counter32 Max-Access read-only Status current Description The number of received control packets at a station. wlsrStaRxCtrlBytes Syntax Counter32 Max-Access read-only Status current Description The number of received control bytes at a station. wlsStaRxDataPkts Syntax Counter32 Max-Access read-only Status current Description The number of received data packets at a station.
Table 18 wlsrStaPktSizeStatsTable OIDs (Continued) Object Object ID wlsrStaTxPkts128To255 1.3.6.1.4.1.14823.2.3.1.1.3.3.5.1.3 wlsrChannelPktSizeStatsEntry 3 wlsrStaTxPkts256To511 1.3.6.1.4.1.14823.2.3.1.1.3.3.5.1.4 wlsrChannelPktSizeStatsEntry 4 wlsrStaTxPkts512To1023 1.3.6.1.4.1.14823.2.3.1.1.3.3.5.1.5 wlsrChannelPktSizeStatsEntry 5 wlsrStaTxPkts1024To1518 1.3.6.1.4.1.14823.2.3.1.1.3.3.5.1.
wlsrStaTxPkts256To511 Syntax Counter32 Max-Access read-only Status current Description The number of packets transmitted by the station that were between 256 and and 511 bytes long. wlsrStaTxPkts512To1023 Syntax Counter32 Max-Access read-only Status current Description The number of packets transmitted by the station that were between 512 and 1023 bytes long.
wlsrStaRxPkts128To255 Syntax Counter32 Max-Access read-only Status current Description The number of packets received by the station that were between 128 and 255 bytes long. wlsrStaRxPkts256To511 Syntax Counter32 Max-Access read-only Status current Description The number of packets received by the station that were between 256 and 511 bytes long.
Table 19 wlsrAirMonitorApListTable OIDs (Continued) Object Object ID wlsrAmChannel 1.3.6.1.4.1.14823.2.3.1.1.4.1.1.3 wlsrAirMonitorApListEntry 3 wlsrAmPhysicalType 1.3.6.1.4.1.14823.2.3.1.1.4.1.1.4 wlsrAirMonitorApListEntry 4 wlsrAmAccessPointType 1.3.6.1.4.1.14823.2.3.1.1.4.1.1.5 wlsrAirMonitorApListEntry 5 wlsrAmRAPType 1.3.6.1.4.1.14823.2.3.1.1.4.1.1.6 wlsrAirMonitorApListEntry 6 wlsrAmRSSI 1.3.6.1.4.1.14823.2.3.1.1.4.1.1.7 wlsrAirMonitorApListEntry 7 wlsrAmMonitoredTime 1.3.6.1.4.1.
wlsrAmChannel Syntax Integer(1..165) Max-Access read-only Status current Description The channel on which this access point is operating. wlsrAmPhysicalType Syntax Integer dot11b(1) dot11a(2) dot11g(3) Max-Access read-only Status current Description The physical layer type. wlsrAmAccessPointType Syntax Integer genericAp(1) softAp(2) ciscoAp(3) Max-Access read-only Status current Description The type of access point.
wlsrAmRSSI Syntax Integer32 Max-Access read-only Status current Description The access point receiver signal strength. wlsrAmMonitoredTime Syntax TimeTicks Max-Access read-only Status current Description Time in ticks since the air monitor is observing this access point. wlsrAmInactivityTime Syntax TimeTicks Max-Access read-only Status current Description Access point inactivity time.
Table 20 wlsrTrapsGroup OIDs (Continued) Object Object ID wlsrTargetApChannel 1.3.6.1.4.1.14823.2.3.1.1.100.100.3 wlsrTrapObjectsGroup 3 wlsrSourceMac 1.3.6.1.4.1.14823.2.3.1.1.100.100.4 wlsrTrapObjectsGroup 4 wlsrNodeMac 1.3.6.1.4.1.14823.2.3.1.1.100.100.5 wlsrTrapObjectsGroup 5 wlsrFrameType 1.3.6.1.4.1.14823.2.3.1.1.100.100.6 wlsrTrapObjectsGroup 6 wlsrAddressType 1.3.6.1.4.1.14823.2.3.1.1.100.100.7 wlsrTrapObjectsGroup 7 wlsrSignatureName 1.3.6.1.4.1.14823.2.3.1.1.100.100.
wlsrTargetApChannel Syntax Integer(1..165) Max-Access read-only Status current Description This object is used in the traps to indicate the channel of the access point for which we are raising the trap. If an air monitor is sending the trap, this will indicate access point. If an access point is sending the trap, it will point to itself. wlsrSourceMac Syntax MacAddress Max-Access read-only Status current Description This object is used in the traps to indicate the MAC address of the source.
wlsrAddressType Syntax Integer srcAddress(1) dstAddress(2) bssid(3) Max-Access read-only Status current Description This object is used in the traps to indicate the address type. wlsrSignatureName Syntax Octet String (Size (0..64)) Max-Access read-only Status current Description This object is used in the traps to indicate the signature name. wlsrMatchedMac Syntax MacAddress Max-Access read-only Status current Description This object is used in the traps to indicate the MAC address.
wlsrTransmitterMac Syntax MacAddress Max-Access read-only Status current Description This object is used in the traps to indicate the MAC address of the transmitter. wlsrRSSI Syntax Integer32 Max-Access read-only Status current Description This object is used in the traps to indicate the signal strength indicator. wlsrRogueInfoURL Syntax DisplayString(Size(0..
Table 21 wlsrTrapsGroup OIDs (Continued) Object Object ID wlsrChannelMisconfiguration 1.3.6.1.4.1.14823.2.3.1.1.100.1005 wlsrTrapsGroup 1005 wlsrOUIMisconfiguration 1.3.6.1.4.1.14823.2.3.1.1.100.1006 wlsrTrapsGroup 1006 wlsrSSIDMisconfiguration 1.3.6.1.4.1.14823.2.3.1.1.100.1007 wlsrTrapsGroup 1007 wlsrShortPreableMisconfiguration 1.3.6.1.4.1.14823.2.3.1.1.100.1008 wlsrTrapsGroup 1008 wlsrWPAMisconfiguration 1.3.6.1.4.1.14823.2.3.1.1.100.1009 wlsrTrapsGroup 1009 wlsrAdhocNetworkDetected 1.
Table 21 wlsrTrapsGroup OIDs (Continued) Object Object ID wlsrWEPMisconfiguration 1.3.6.1.4.1.14823.2.3.1.1.100.1039 wlsrTrapsGroup 1039 wlsrStaRepeatWEPIVViolation 1.3.6.1.4.1.14823.2.3.1.1.100.1040 wlsrTrapsGroup 1040 wlsrStaWeakWEPIVViolation 1.3.6.1.4.1.14823.2.3.1.1.100.1041 wlsrTrapsGroup 1041 wlsrStaAssociatedToUnsecureAp 1.3.6.1.4.1.14823.2.3.1.1.100.1042 wlsrTrapsGroup 1042 wlsrAdhocNetworkBridgeDetected 1.3.6.1.4.1.14823.2.3.1.1.100.
wlsrChannelMisconfiguration Objects {wlsrTargetApBSSID, wlsrTargetApSSID, wlsrLocation, wlsrCurrentChannel} Status current Description This trap indicates that an Access Point has a bad channel configuration. wlsrOUIMisconfiguration Objects {wlsrTargetApBSSID, wlsrTargetApSSID, wlsrLocation, wlsrCurrentChannel} Status current Description This trap indicates that an Access Point has a bad OUI configuration.
wlsrStaPolicyViolation Objects {wlsrTargetApBSSID, wlsrNodeMac, wlsrLocation, wlsrCurrentChannel} Status current Description This trap indicates that a Valid Station policy is violated. wlsrRepeatWEPIVViolation Objects {wlsrTargetApBSSID, wlsrTargetApSSID, wlsrLocation, wlsrCurrentChannel} Status current Description This trap indicates that an AP/AM detected a Repeat WEP-IV violation.
wlsrFrameRetryRateExceeded Objects {wlsrTargetApBSSID, wlsrTargetApSSID, wlsrLocation, wlsrCurrentChannel} Status current Description This trap indicates that an AM/AP located at wlsrLocation is reporting that an AP wlsrTargetApBSSID has exceeded an upper threshold for frame retry rate for AP wlsrTargetApBSSID.
wlsrFrameNonUnicastRateExceeded Objects {wlsrNodeMac, wlsrTargetApBSSID, wlsrTargetApSSID, wlsrLocation, wlsrCurrentChannel} Status current Description This trap indicates that an AM/AP located at wlsrLocation is reporting that a station wlsrStaAddress has exceeded the non-unicast traffic rate.
wlsrChannelRateAnomaly Objects {wlsrFrameType, wlsrLocation, wlsrCurrentChannel} Status current Description This trap indicates that an AP/AM at wlsrLocation detected frames of type wlsrFrameType on wlsrCurrentChannel which exceeds the configured IDS rate threshold.
wlsrApFloodAttack Objects {wlsrLocation} Status current Description This trap is triggered when the number of spurious AP’s detected by an AP/AM at wlsrLocation exceeds the configured IDS threshold. wlsrAdhocNetwork Objects {wlsrSourceMac, wlsrTargetApBSSID, wlsrTargetApSSID, wlsrRSSI, wlsrLocation} Status current Description This trap indicates that an AP/AM at wlsrLocation detected an ad hoc network. Node wlsrSourceMac is connected to an ad hoc AP wlsrTargetAApBSSID with wlsrTargetApSSID.
wlsrStaRepeatWEPIVViolation Objects {wlsrTargetApBSSID, wlsrTargetApSSID, wlsrNodeMac, wlsrLocation, wlsrCurrentChannel} Status current Description This trap indicates that an AP/AM detected a repeat WEP-IV violation for a station. wlsrStaWeakWEPIVViolation Objects {wlsrTargetApBSSID, wlsrTargetApSSID, wlsrNodeMac, wlsrLocation, wlsrCurrentChannel} Status current Description This trap indicates that an AP/AM detected a weak WEP-IV violation for a station.
| AP and AM Dell PowerConnect ArubaOS 5.
Chapter 4 Authentication The Authentication module provides information about the authentication server, as well as entities that are attempting to access the network.Authentication is used to verify the entity that is communicating to a device. Figure 6 shows the architecture of the Auth MIB relative to 1.3.6.1.4.1.14823 (iso.org.dod.internet.private.enterprise.aruba). The Authentication MIBs are listed in the file aruba-auth.my.
The Authentication MIB consists of several tables, which are listed and summarized in Table 22. The objects of each table are described in the following sections. Table 22 Authentication MIB Tables Group Description wlsxAuthenticationServerTable Contains the users (both wired and wireless) currently connected to the controller. Users are identified by their IP addresses. wlsxPortalServerTable Contains the configured captive portal servers. wlsxLdapServerStateTable Contains the LDAP server state.
wlsxAuthenticationServerEntry Syntax wlsxAuthenticationServerEntry Max-Access not-accessible Status current Description Server entry. Index { authServerName } authServerName Syntax DisplayString(SIZE(0..32)) Max-Access not-accessible Status current Description The name of the authentication server. authServerType Syntax ArubaAuthServerType Max-Access read-only Status current Description The type of the authentication server.
authServerRetryCount 106 | Authentication Syntax Integer32 Max-Access read-create Status current Description The configured retry count. Dell PowerConnect ArubaOS 5.
authServerTimeOutValue Syntax nteger32 Max-Access read-create Status current Description The configured timeout value. authServerState Syntax ArubaEnableValue Max-Access read-only Status current Description The state of the authentication server. authServerInservice Syntax TruthValue Max-Access read-only Status current Description An indication of whether or not the authentication server is in service.
Max-Access read-only Status current Description The number of times this server responded with failure. authServerTimeouts Syntax Counter32 Max-Access read-only Status current Description The number of times this communication with this server timed out. authServerAvgResponseTime Syntax Integer32 Max-Access read-only Status current Description The average response time of the server in milliseconds.
Table 24 wlsxPortalServerTable OIDs Object Object ID wlsxPortalServerEntry 1.3.6.1.4.1.14823.2.2.1.8.1.2.1 wlsxPortalServerTable 1 portalServerIndex 1.3.6.1.4.1.14823.2.2.1.8.1.2.1.1 wlsxPortalServerEntry 1 portalServerHost 1.3.6.1.4.1.14823.2.2.1.8.1.2.1.2 wlsxPortalServerEntry 2 portalServerPort 1.3.6.1.4.1.14823.2.2.1.8.1.2.1.3 wlsxPortalServerEntry 3 portalServerPage 1.3.6.1.4.1.14823.2.2.1.8.1.2.1.4 wlsxPortalServerEntry 4 portalServerProtocol 1.3.6.1.4.1.14823.2.2.1.8.1.2.1.
wlsxPortalServerEntry Syntax wlsxPortalServerEntry Max-Access not-accessible Status current Description Portal Server Entry Index { portalServerIndex } portalServerIndex Syntax DisplayString(SIZE(0..256)) Max-Access not-accessible Status current Description Portal server index. portalServerHost Syntax DisplayString(SIZE(0..256)) Max-Access read-only Status current Description The IP address of the portal server.
portalServerProtocol Syntax DisplayString Max-Access read-only Status current Description The portal server protocol (e.g., HTTP or HTTPS). wlsxLdapServerStateTable The objects of the wlsx Ldap Server State table provide information about the state of the LDAP server. Table 25 wlsxLdapServerStateTable Object Object ID wlsxLdapServerStateEntry 1.3.6.1.4.1.14823.2.2.1.8.1.5.1 wlsxLdapServerStateTable 1 ldapInitDone 1.3.6.1.4.1.14823.2.2.1.8.1.5.1.
wlsxLdapServerStateEntry Syntax wlsxLdapServerStateEntry Max-Access not-accessible Status current Description LDAP Server Entry. Index { authServerName } ldapInitDone Syntax TruthValue Max-Access read-only Status current Description Indicates whether the controller is initialized with the server. ldapAdminBound Syntax Integer no(1) yes(2) inProgress(3) Max-Access read-only Status current Description Indicates whether the controller is bound to the server.
Chapter 5 External Services Interface The External Services Interface (ESI) module provides information about the Wireless Management System (WMS) in the Dell controller. ESI is used for redirecting traffic to a virus scanner, context filter, or other third party network appliances. Figure 7 shows the architecture of the ESI MIB relative to 1.3.6.1.4.1.14823 (iso.org.dod.internet.private.enterprise.aruba). The ESI MIBs are listed in the file aruba-esi.my.
The objects of the wlsx ESI Server table provide information of the ESI servers that are configured on the controller. Table 27 wlsxESIServerTable OIDs Object Object ID wlsxESIServerEntry 1.3.6.1.4.1.14823.2.2.1.10.1.1.1 wlsxESIServerTable 1 esiServerName 1.3.6.1.4.1.14823.2.2.1.10.1.1.1.1 wlsxESIServerEntry 1 esiServerGroup 1.3.6.1.4.1.14823.2.2.1.10.1.1.1.2 wlsxESIServerEntry 2 esiServerMode 1.3.6.1.4.1.14823.2.2.1.10.1.1.1.3 wlsxESIServerEntry 3 esiServerTrustedIP 1.3.6.1.4.1.14823.2.2.1.
esiServerMode Syntax ArubaESIServerMode Max-Access read-only Status current Description The mode of this server. esiServerTrustedIP Syntax IpAddress Max-Access read-only Status current Description The trusted IP address of this server, or 0.0.0.0 if it is not set. esiServerUntrustedIP Syntax IpAddress Max-Access read-only Status current Description The untrusted IP address of this server, or 0.0.0.0 if it is not set.
esiServerUntrustedSlot Syntax Integer32 Max-Access read-only Status current Description The slot number of the untrusted interface for this server. esiServerUntrustedPort Syntax Integer32 Max-Access read-only Status current Description The port number of the untrusted interface for this server. esiServerStatus Syntax ArubaESIServerStatus Max-Access read-only Status current Description Indicates the status of this ESI server.
Chapter 6 IF External IF External (IF EXT) MIB objects provide system-level information about the Dell controller—physical ports, configured VLANs, the port memberships, and the interfaces that define the VLANs. Figure 8 shows the architecture of the IF EXT MIB relative to 1.3.6.1.4.1.14823 (iso.org.dod.internet.private.enterprise.aruba). The IF External MIBs are listed in the file aruba-ifext.my. For information about downloading Aruba MIB files, see “Downloading MIB Files” on page 23.
The objects of the wlsx External Port table define the physical ports of the controller. Table 29 wlsxIfExtPortTable OIDs 118 | IF External Object Object ID wlsxIfExtPortEntry 1.3.6.1.4.1.14823.2.2.1.3.1.1.1 wlsxIfExtPortTable 1 ifExtSlotNumber 1.3.6.1.4.1.14823.2.2.1.3.1.1.1.1 wlsxIfExtPortEntry 1 ifExtPortNumber 1.3.6.1.4.1.14823.2.2.1.3.1.1.1.2 wlsxIfExtPortEntry 2 ifExtPortIfIndex 1.3.6.1.4.1.14823.2.2.1.3.1.1.1.3 wlsxIfExtPortEntry 3 ifExtAdminState 1.3.6.1.4.1.14823.2.2.1.3.1.1.1.
wlsxIfExtPortEntry Syntax wlsxIfExtPortEntry Max-Access not-accessible Status current Description An entry for one processor contained by the controller. Index { ifExtSlotNumber, ifExtPortNumber } ifExtSlotNumber Syntax Integer32 Max-Access not-accessible Status current Description This object represents the physical slot of the interface. ifExtPortNumber Syntax Integer32 Max-Access not-accessible Status current Description This object represents the physical port of the interface.
ifExtOperState Syntax Integer up(1) down(2) testing(3) Max-Access read-only Status current Description The current operational state of the interface. ifExtPoeState Syntax ArubaPoeState Max-Access read-write Status current Description The current state of the power over ethernet capability of the port. ifExtIsTrusted Syntax TruthValue Max-Access read-write Status current Description The object indicates if the port is used in the trusted side of the network or the untrusted side.
ifExtAccessVLANId Syntax ArubaVLANValidRange Max-Access read-write Status current Description The VLAN ID when the port is in access mode. ifExtTrunkNativeVLANId Syntax ArubaVLANValidRange Max-Access read-write Status current Description The native VLAN ID of the Port when the port is in dot1q mode.
ifExtIngressACLName Syntax DisplayString(SIZE(0..64)) Max-Access read-write Status current Description This object represents the ingress ACL name applied to the port. An empty string indicates that ACL is not applied on this port. ifExtEgressACLName Syntax DisplayString(SIZE(0..64)) Max-Access read-write Status current Description This object represents the egress ACL name applied to the port. An empty string indicates that ACL is not applied on this port.
ifExtIsMux Syntax TruthValue Max-Access read-write Status current Description This object indicates if the port is used as a MUX Port. ifExtUserSlotNumber Syntax Integer32 Max-Access read-only Status current Description The user-visible (zero-based) slot number. ifExtUserPortNumber Syntax Integer32 Max-Access read-only Status current Description The user-visible (zero-based) port number.
ifExtPortType Syntax ArubaPortType Max-Access read-only Status current Description The type of the port. ifExtDescr Syntax DisplayString Max-Access read-only Status current Description Port description. wlsxIfExtVLANTable The objects of the wlsx IF External VLAN table provide information about the VLANs of the controller. Table 30 wlsxIfExtVLANTable OIDs Object Object ID wlsxIfExtVLANEntry 1.3.6.1.4.1.14823.2.2.1.3.1.2.1 wlsxIfExtVLANTable 1 ifExtVLANId 1.3.6.1.4.1.14823.2.2.1.3.1.2.
ifExtVLANId Syntax ArubaVLANValidRange Max-Access not-accessible Status current Description This object represents the VLAN ID of the interface. ifExtVLANName Syntax DisplayString(SIZE(0..64)) Max-Access read-create Status current Description Name of the VLAN. ifExtVLANStatus Syntax Row Status Max-Access read-create Status current Description A row status object used to create/modify the row.
wlsxIfExtVLANMemberEntry Syntax wlsxIfExtVLANMemberEntry Max-Access not-accessible Status current Description An entry for one processor contained by the controller. Index { ifExtVLANId, ifIndex } ifExtVLANMemberStatus Syntax Row Status Max-Access read-create Status current Description A row status object used to create/modify and indicate the status row.
wlsxIfExtVLANInterfaceTable The objects of the wlsx IF EXT VLAN Interface table provide information about Layer 3 VLAN interfaces. Table 32 wlsxIfExtVLANInterfaceTable OIDs130 Object Object ID wlsxIfExtVLANInterfaceEntry 1.3.6.1.4.1.14823.2.2.1.3.1.4.1 wlsxIfExtVLANInterfaceTable 1 ifExtVLANInterfaceIfIndex 11.3.6.1.4.1.14823.2.2.1.3.1.4.1.1 wlsxIfExtVLANInterfaceEntry 1 ifExtVLANInterfaceDescription 11.3.6.1.4.1.14823.2.2.1.3.1.4.1.
ifExtVLANInterfaceDescription Syntax DisplayString(SIZE(0..64)) Max-Access read-create Status current Description The description of the VLAN interface. ifExtVLANInterfaceBWContract Syntax DisplayString(SIZE(0..64)) Max-Access read-create Status current Description This object indicates the bandwidth contract on the interface. ifExtVLANInterfaceAdminState Syntax ArubaEnableValue Max-Access read-create Status current Description This object indicates the IP address of the interface.
ifExtVLANInterfaceIpMask Syntax IpAddress Max-Access read-create Status current Description This object indicates the IP mask of the interface. ifExtVLANInterfaceIsLocalArp Syntax ArubaEnableValue Max-Access read-create Status current Description This object indicates if the Local Arp is set on the interface. ifExtVLANInterfaceStatus Syntax Row Status Max-Access read-create Status current Description A row status object used to create/modify and indicate the status row.
ifExtVlanInterfaceIpIgmpSnooping 130 | IF External Syntax ArubaEnableValue Max-Access read-create Status current Description This object indicates if the IP IGMP snooping is set on the interface. History Added in ArubaOS 3.2.0.0. Dell PowerConnect ArubaOS 5.
Chapter 7 Mesh The Mesh module provides information about Mesh portal and topology in the Dell controller. Mesh is a new addition to the ArubaOS MIB family. Figure 9 shows the architecture of the Mesh MIB relative to 1.3.6.1.4.1.14823 (iso.org.dod.internet.private.enterprise.aruba). The Mesh MIBs are listed in the file aruba-mesh.my. For information about downloading Dell MIB files, see “Downloading MIB Files” on page 23. Figure 9 Mesh Hierarchy 1.3.6.1.4.1.
wlsxMeshNodeTotal Syntax Unsigned32 Max-Access read-only Status current Description Total Number of mesh nodes in the controller. History Added in ArubaOS 3.2.0.0. wlsxMeshNodeTable The objects of the wlsx Mesh Node table provide information about the Mesh Node. Table 34 Mesh Node Table OIDs Object Object ID wlsxMeshNodeEntry 1.3.6.1.4.1.14823.2.2.1.13.1.1.2.1 wlsxMeshNodeTable 1 wlsxMeshRole 1.3.6.1.4.1.14823.2.2.1.13.1.1.2.1.1 wlsxMeshNodeEntry 1 wlsxMeshNodeParent 1.3.6.1.4.1.14823.2.
wlsxMeshRole Syntax ArubaMeshRole MAX-ACCES read-only Status current Description Mesh role. History Added in ArubaOS 3.2.0.0. wlsxMeshNodeParent Syntax MacAddress Max-Access read-only Status current Description Mesh node parent. History Added in ArubaOS 3.2.0.0. wlsxMeshNodeChildrenCount Syntax Unsigned32 Max-Access read-only Status current Description Mesh node children count. History Added in ArubaOS 3.2.0.0. wlsxMeshNodeCluster Syntax DisplayString(SIZE(0..
wlsxMeshNodeRfBand Syntax ArubaPhyType Max-Access read-only Status current Description Mesh node RF band. History Added in ArubaOS 3.2.0.0. wlsxMeshNodePathCost Syntax Integer32 Max-Access read-only Status current Description Mesh topology path cost. History Added in ArubaOS 3.2.0.0. wlsxMeshNodeNodeCost Syntax Integer32 Max-Access read-only Status current Description Mesh topology node cost. History Added in ArubaOS 3.2.0.0.
wlsxMeshNodeHopCount Syntax Integer32 Max-Access read-only Status current Description Mesh topology hop cost. History Added in ArubaOS 3.2.0.0. Dell PowerConnect ArubaOS 5.
| Mesh Dell PowerConnect ArubaOS 5.
Chapter 8 Mobility The Mobility module provides information about the subsystem in the Dell controller, such as the home agent (HA) or foreign agent (FA) of a roaming agent. Figure 10 shows the architecture of the Mobility MIB relative to 1.3.6.1.4.1.14823 (iso.org.dod.internet.private.enterprise.aruba). The Mobility MIBs are listed in the file aruba-mobility.my. For information about downloading Dell MIB files, see “Downloading MIB Files” on page 23. Figure 10 Mobility Hierarchy 1.3.6.1.4.1.
The Mobility MIB contains the following objects. The objects of each table are described in the following sections. Table 35 Mobility Objects Table Description wlsxMobilityDomainTable This table lists all mobility domains configured on the controller. wlsxMobilityHostTable This table lists all mobile hosts on the controller. wlsxMobilityProxyStatsGroup This group contains proxy state machine statistics—the number of packets handled by the MobileIP Proxy state machine.
mobilityDomainName Syntax DisplayString Max-Access not-accessible Status current Description The name of the active mobility domain(s) this controller belongs to. History Update in ArubaOS 3.1—description. mobilityDomainIsExclusive Syntax ArubaEnableValue Max-Access read-only Status deprecated Description Indicates whether this mobility domain is exclusive or not. History Deprecated in ArubaOS 3.1.0.0.
wlsxMobilityHomeAgentEntry Syntax wlsxMobilityHomeAgentEntry Max-Access not-accessible Status current Description Mobility home agent entry. Index { mobilityHomeAgentSubnet, mobilityHomeAgentMask, mobiltityHomeAgentIp } mobilityHomeAgentSubnet Syntax IpAddress Max-Access read-only Status current Description Subnet of the home agent. mobilityHomeAgentMask Syntax IpAddress Max-Access read-only Status current Description Subnet mask of the home agent.
wlsxMobilityHostTable The objects of the wlsx Mobility Host table provide information about the mobile hosts on the controller. Table 38 wlsxMobilityHostTable OIDs Object Object ID wlsxMobilityHostEntry 1.3.6.1.4.1.14823.2.2.1.9.1.4.1 wlsxMobilityHostTable 1 mobilityHostMac 1.3.6.1.4.1.14823.2.2.1.9.1.4.1.1 wlsxMobilityHostEntry 1 mobilityHostIp 1.3.6.1.4.1.14823.2.2.1.9.1.4.1.2 wlsxMobilityHostEntry 2 mobilityHostStatus 1.3.6.1.4.1.14823.2.2.1.9.1.4.1.
mobilityHostStatus Syntax DisplayString Max-Access read-only Status current Description Roaming status of the mobile host. mobilityHostServiceTime Syntax Integer32 Max-Access read-only Status current Description The time (seconds) mobility service is provided to the mobile host. mobilityHostHomeVLAN Syntax Integer32 Max-Access read-only Status current Description Home VLAN of the mobile host.
mobilityHostDhcpInfo Syntax DisplayString Max-Access read-only Status current Description DHCP details of the mobile host. wlsxMobilityProxyStatsGroup The objects of this group provide information of the number of packets MobileIP Proxy state machine handled. Table 39 wlsxMobilityProxyStats OIDs Object Object ID mobilityProxyPktRx 1.3.6.1.4.1.14823.2.2.1.9.2.1 wlsxMobilityProxyStatsGroup 1 mobilityProxyPktHandled 1.3.6.1.4.1.14823.2.2.1.9.2.
mobilityProxyPktFwd Syntax Counter32 Max-Access read-only Status current Description The number of packets the proxy state machine forwarded back to data path. mobilityProxyPktDrop Syntax Counter32 Max-Access read-only Status current Description The number of packets the proxy state machine dropped. mobilityProxyBusy Syntax Counter32 Max-Access read-only Status current Description The number of mobility events the proxy state machine ignored because it was busy.
mobilityProxyClientEssidChg Syntax Counter32 Max-Access read-only Status current Description The number of times mobility detected client ESSID change. wlsxMobilityProxyDHCPStats Group The objects of this group provide information of the number of DHCP packages the Mobile IP state machine handles. Table 40 wlsxMobilityProxyDHCPStats Object Object ID mobilityProxyDhcpBootpRx 1.3.6.1.4.1.14823.2.2.1.9.3.1 wlsxMobilityProxyDHCPStatsGroup 1 mobilityProxyDhcpPktProc 1.3.6.1.4.1.14823.2.2.1.9.3.
mobilityProxyDhcpPktFwd Syntax Counter32 Max-Access read-only Status current Description The number of DHCP messages forwarded. mobilityProxyDhcpPktDrop Syntax Counter32 Max-Access read-only Status current Description The number of DHCP messages dropped. mobilityProxyDHCPNak Syntax Counter32 Max-Access read-only Status current Description The number of DHCP NAK received from the server.
mobilityProxyDHCPNoHomeVLAN Syntax Counter32 Max-Access read-only Status current Description The number of DHCP-requested IP for which home VLAN does not exist. mobilityProxyDHCPUnexpFrame Syntax Counter32 Max-Access read-only Status current Description The number of unexpected DHCP frames received from client. mobilityProxyDHCPUnexpRemote Syntax Counter32 Max-Access read-only Status current Description The number of unexpected DHCP frames received from remote HA/FA.
Table 41 wlsxMobilityHAStats OIDs (Continued) Object Object ID mobilityHAMalform 1.3.6.1.4.1.14823.2.2.1.9.4.11 wlsxMobilityHAStatsGroup 11 mobilityHATooManyBnd 1.3.6.1.4.1.14823.2.2.1.9.4.12 wlsxMobilityHAStatsGroup 12 mobilityHABndExpire 1.3.6.1.4.1.14823.2.2.1.9.4.13 wlsxMobilityHAStatsGroup 13 mobilityHARxRRQ Syntax Counter32 Max-Access read-only Status current Description The number of registration requests received by HA.
mobilityHARRQIgnore Syntax Counter32 Max-Access read-only Status current Description The number of registration requests ignored by HA. mobilityHARRQAdminDeny Syntax Counter32 Max-Access read-only Status current Description The number of registration requests denied for administrative reasons by HA. mobilityHARRQNoResource Syntax Counter32 Max-Access read-only Status current Description The number of registration requests denied due to lack of resources by HA.
mobilityHABadID Syntax Counter32 Max-Access read-only Status current Description The number of mobile IP messages rejected by HA due to bad identification. mobilityHAMalform Syntax Counter32 Max-Access read-only Status current Description The number of mobile IP messages rejected by HA due to being poorly formed. mobilityHATooManyBnd Syntax Counter32 Max-Access read-only Status current Description The number of registration requests rejected due to too many bindings at HA.
Table 42 wlsxMobilityFAStats OIDs (Continued) Object Object ID mobilityFARRQReject 1.3.6.1.4.1.14823.2.2.1.9.5.4 wlsxMobilityFAStatsGroup 4 mobilityMNHAauthFAIL 1.3.6.1.4.1.14823.2.2.1.9.5.5 wlsxMobilityFAStatsGroup 5 mobilityFAHAauthFAIL 1.3.6.1.4.1.14823.2.2.1.9.5.6 wlsxMobilityFAStatsGroup 6 mobilityFABadID 1.3.6.1.4.1.14823.2.2.1.9.5.7 wlsxMobilityFAStatsGroup 7 mobilityFAMalfor 1.3.6.1.4.1.14823.2.2.1.9.5.
mobilityMNHAauthFAIL Syntax Counter32 Max-Access read-only Status current Description The number of times MN-HA authentication failed. mobilityFAHAauthFAIL Syntax Counter32 Max-Access read-only Status current Description The number of FA-HA authentications that failed. mobilityFABadID Syntax Counter32 Max-Access read-only Status current Description The number of mobile IP messages rejected by FA due to bad identification.
Table 43 wlsxMobilityHAFARevocationStats Object Object ID mobilitySentRRVAck 1.3.6.1.4.1.14823.2.2.1.9.6.4 wlsxMobilityHAFARevocationStatsGroup 4 mobilityRRVRQIgnore 1.3.6.1.4.1.14823.2.2.1.9.6.5 wlsxMobilityHAFARevocationStatsGroup 5 mobilityRRVAckIgnore 1.3.6.1.4.1.14823.2.2.1.9.6.6 wlsxMobilityHAFARevocationStatsGroup 6 mobilitySentRRVRQ Syntax Counter32 Max-Access read-only Status current Description The number of registration revocation requests sent.
mobilityRRVRQIgnore Syntax Counter32 Max-Access read-only Status current Description The number of registration revocation requests ignored. mobilityRRVAckIgnore 154 | Mobility Syntax Counter32 Max-Access read-only Status current Description The number of registrations that revocation ACK ignored. Dell PowerConnect ArubaOS 5.
Chapter 9 Monitor The Monitor module provides information about network traffic. Monitoring access points can be used to observe network traffic, such as the number of packets transferred at a specific rate, the number of errors per access point, and so on. Figure 11 shows the architecture of the Monitor MIB relative to 1.3.6.1.4.1.14823 (iso.org.dod.internet.private.enterprise.aruba). The Monitor MIBs are listed in the file aruba-mon.my.
1.3.6.1.4.1.14823 Aruba wlsx Enterprise Mib Modules 1.3.6.1.4.1.14823.2 Switch 1.3.6.1.4.1.14823.2.2 wlsx Enterprise MIB Modules 1.3.6.1.4.1.14823.2.2.1 wlsx Mon MIB 1.3.6.1.4.1.14823.2.2.1.6 wlsx Mon Stats Gr oup 1.3.6.1.4.1.14823.2.2.1.6.6 1.3.6.1.4.1.14823.2.2.1.6.6.1 wlsx Mon Access Point Stats Group wlsx Mon AP Stats Table 1.3.6.1.4.1.14823.2.2.1.6.6.1.1 wlsx Mon AP Rate Stats Table 1.3.6.1.4.1.14823.2.2.1.6.6.1.2 wlsx Mon AP DAT Type Stats Table 1.3.6.1.4.1.14823.2.2.1.6.6.1.3 1.3.6.
Table 44 Monitor MIB Tables (Continued) Table Description wlsxMonAPDATypeStatsTable This table lists the per BSSID packet and byte counts that are sorted by the destination address. wlsxMonAPFrameTypeStatsTable This table lists the per BSSID packet and byte counts that are sorted by frame type. wlsxMonAPPktSizeStatsTable This table lists the per BSSID packet and byte counts that are sorted by packet size.
Table 45 wlsxMonApStatsTable OIDs (Continued) Object Object ID monAPRxBytes 1.3.6.1.4.1.14823.2.2.1.6.6.1.1.1.11 wlsxMonAPStatsEntry 11 monAPTxDeauthentications 1.3.6.1.4.1.14823.2.2.1.6.6.1.1.1.12 wlsxMonAPStatsEntry 12 monAPRxDeauthentications 1.3.6.1.4.1.14823.2.2.1.6.6.1.1.1.13 wlsxMonAPStatsEntry 13 monAPChannelThroughput 1.3.6.1.4.1.14823.2.2.1.6.6.1.1.1.14 wlsxMonAPStatsEntry 14 monAPFrameRetryRate 1.3.6.1.4.1.14823.2.2.1.6.6.1.1.1.15 wlsxMonAPStatsEntry 15 monAPFrameLowSpeedRate 1.
monRadioNumber Syntax Integer32 Max-Access not-accessible Status current Description The radio number of the air monitor that is monitoring the access point. monitoredApBSSID Syntax MacAddress Max-Access not-accessible Status current Description The BSSID of the monitored access point. monPhyType Syntax ArubaPhyType Max-Access read-only Status current Description The PHY type of the monitored access point.
monAPTxPkts Syntax Counter32 Max-Access read-only Status current Description The number of packets transmitted by this monitored access point. History Update in ArubaOS 3.1—description. monAPTxBytes Syntax Counter32 Max-Access read-only Status current Description The number of bytes transmitted by this monitored access point. History Update in ArubaOS 3.1—description.
monAPTxDeauthentications Syntax Counter32 Max-Access read-only Status current Description The number of deauthentications transmitted by this monitored access point. History Update in ArubaOS 3.1—description. monAPRxDeauthentications Syntax Counter32 Max-Access read-only Status current Description The number of deauthentications received by this monitored access point. History Update in ArubaOS 3.1—description.
monAPFrameLowSpeedRate Syntax Integer32 Max-Access read-only Status current Description The number of low data rate (<= 18 Mbps for A/G bands and <=2 Mbps for B band) packets as a percentage of the total packets transmitted and received by this monitored access point. History Update in ArubaOS 3.1—description. monAPFrameNonUnicastRate Syntax Integer32 Max-Access read-only Status current Description The multicast rate on this monitored access point. History Update in ArubaOS 3.
monAPFrameRetryErrorRate Syntax Integer32Status Max-Access read-only Status deprecated Description The number of error packets as a percentage of the total packets received on this monitored access point. History Deprecated in ArubaOS 3.1.0.0. monAPChannelErrorRate Syntax Integer32 Max-Access read-only Status current Description The number of error packets as a percentage of the total packets received on the current channel. History Update in ArubaOS 3.1—description.
monAPFrameReceiveErrorRate Syntax Integer32 Max-Access read-only Status current Description The number of error packets as a percentage of the total packets received on this monitored access point. History Added in ArubaOS 3.1 wlsxMonAPRateStatsTable The objects of the wlsx Monitor AP Rate Statistics table provide AP statistics that are sorted by rate categories. Table 46 wlsxMonAPRateStatsTable OIDs 164 | Monitor Object OID wlsxMonAPRateStatsEntry 1.3.6.1.4.1.14823.2.2.1.6.6.1.2.
Table 46 wlsxMonAPRateStatsTable OIDs Object OID monAPStatsTotPktsAt9Mbps 1.3.6.1.4.1.14823.2.2.1.6.6.1.2.1.23 wlsxMonAPRateStatsEntry 23 monAPStatsTotBytesAt9Mbps 1.3.6.1.4.1.14823.2.2.1.6.6.1.2.1.24 wlsxMonAPRateStatsEntry 24 wlsxMonAPRateStatsEntry Syntax Sequence of wlsxMonAPRateStatsEntry Max-Access not-accessible Status current Description Data rate-based packet and byte count entry for a monitored access point.
monAPStatsTotBytesAt2Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of bytes observed from this BSSID at 2 Mbps rate. monAPStatsTotPktsAt5Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observed from this BSSID at 5 Mbps rate.
monAPStatsTotPktsAt6Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observed from this BSSID at 6 Mbps rate. monAPStatsTotBytesAt6Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of bytes observed from this BSSID at 6 Mbps rate.
monAPStatsTotBytesAt18Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of bytes observed from this BSSID at 18 Mbps rate. monAPStatsTotPktsAt24Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observed from this BSSID at 24 Mbps rate.
monAPStatsTotPktsAt48Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observed from this BSSID at 48 Mbps rate. monAPStatsTotBytesAt48Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of bytes observed from this BSSID at 48 Mbps rate.
monAPStatsTotBytesAt9Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of bytes observed from this BSSID at 9 Mbps rate. wlsxMonAPDATypeStatsTable The objects of the wlsx Mon Access Point DA Type Statistics table provide information about all the BSSID packet and byte counts, which are sorted by the Destination Address (DA) Type. Table 47 wlsxMonAPDATypeStatsTable OIDs Object Object ID wlsxMonAPDATypeStatsEntry 1.3.6.1.4.1.14823.2.2.
monAPStatsTotDABroadcastPkts Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of broadcast packets observed from this BSSID. monAPStatsTotDABroadcastBytes Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of broadcast bytes observed from this BSSID.
monAPStatsTotDAUnicastBytes Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of unicast bytes observed from this BSSID. wlsxMonAPFrameTypeStatsTable The objects of the wlsx Mon Access Point Frame Type Stats table provide statistics of the BSSID packet and byte counts, which are sorted by Destination Address (DA) Type.
monAPStatsTotCtrlPkts Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of control packets observed from this BSSID. monAPStatsTotCtrlBytes Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of control bytes observed from this BSSID.
wlsxMonAPPktSizeStatsEntry Syntax wlsxMonAPPktSizeStatsEntry Max-Access not-accessible Status current Description Packet size-based packet count entry for a BSSID. Index { monPhyAddress, monRadioNumber, monitoredApBSSID } monAPStatsPkts63Bytes Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets transmitted by the access point that were less than 64 bytes long. History Updated in ArubaOS 3.1—description.
monAPStatsPkts256To511 Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets transmitted by the access point that were between 256 and 511 bytes long. monAPStatsPkts512To1023 Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets transmitted by the access point that were between 512 and 1023 bytes long.
wlsxMonAPHTRateStatsEntry Syntax WlsxMonAPHTRateStatsEntry Max-Access not-accessible Status current Description Data rate based packet and byte count entry for a monitored AP.
wlsxMonStationStatsTable The objects of the wlsx Monitor Station Statistics table provide aggregate statistics collected for a station. Table 49 MonStationStats Table Object Object ID wlsxMonStationStatsEntry 1.3.6.1.4.1.14823.2.2.1.6.6.2.1.1 wlsxMonStationStatsTable 1 monitoredStaPhyAddress 1.3.6.1.4.1.14823.2.2.1.6.6.2.1.1.1 wlsxMonStationStatsEntry 1 monStaChannelNum 1.3.6.1.4.1.14823.2.2.1.6.6.2.1.1.2 wlsxMonStationStatsEntry 2 monStaTxPkts 1.3.6.1.4.1.14823.2.2.1.6.6.2.1.1.
wlsxMonStationStatsEntry Syntax MonStationStatsEntry Max-Access not-accessible Status current Description Monitored Station Stats Entry. Index { monPhyAddress, monRadioNumber, monitoredStaPhyAddress } monitoredStaPhyAddress Syntax MacAddress Max-Access not-accessible Status current Description MAC address of the monitored station. monStaChannelNum Syntax Unsigned32 Max-Access read-only Status current Description The channel the station is currently using.
monStaRxPkts Syntax Counter32 Max-Access read-only Status current Description The number of packets received by this station. monStaRxBytes Syntax Counter32 Max-Access read-only Status current Description The number of bytes received by this station. monStaTxBCastPkts Syntax Counter32 Max-Access read-only Status current Description The number of broadcast packets transmitted by this station.
monStaTxMCastBytes Syntax Counter32 Max-Access read-only Status current Description The number of multicast bytes transmitted by this station. monStaDataPkts Syntax Counter32 Max-Access read-only Status current Description The total number of data packets transmitted by this station. monStaCtrlPkts Syntax Counter32 Max-Access read-only Status current Description The total number of control packets transmitted by this station.
monStaTxDeauthentications Syntax Counter32 Max-Access read-only Status current Description The number of deauthentication frames transmitted by this station. monStaRxDeauthentications Syntax Counter32 Max-Access read-only Status current Description The number of deauthentication frames received by this station.
monStaFrameFragmentationRate Syntax Integer32 Max-Access read-only Status current Description The number of fragments as a percentage of the total packets transmitted by this station. monStaFrameBandwidthRate Syntax Integer32 Max-Access read-only Status current Description The bandwidth of this station in Kbps.
monStaPhyType Syntax ArubaPhyType Max-Access read-only Status current Description PHY type of the monitored station. monStaRSSI Syntax Integer32 Max-Access read-only Status current Description SNR of the monitored station. monStaFrameReceiveErrorRate Syntax Integer32 Max-Access read-only Status current Description The number of error packets as a percentage of the total packets received by this station. History Added in ArubaOS 3.1.0.0.
Table 50 wlsxMonStaRateStatsTable OIDs (Continued) 184 | Monitor Object Object ID monStaTxBytesAt6Mbps 1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.10 wlsxMonStaRateStatsEntry 10 monStaTxPktsAt12Mbps 1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.11 wlsxMonStaRateStatsEntry 11 monStaTxBytesAt12Mbps 1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.12 wlsxMonStaRateStatsEntry 12 monStaTxPktsAt18Mbps 1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.13 wlsxMonStaRateStatsEntry 13 monStaTxBytesAt18Mbps 1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.
Table 50 wlsxMonStaRateStatsTable OIDs (Continued) Object Object ID monStaRxBytesAt54Mbps 1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.44 wlsxMonStaRateStatsEntry 44 monStaTxPktsAt9Mbps 1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.45 wlsxMonStaRateStatsEntry 45 monStaTxBytesAt9Mbps 1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.46 wlsxMonStaRateStatsEntry 46 monStaRxPktsAt9Mbps 1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.47 wlsxMonStaRateStatsEntry 47 monStaRxBytesAt9Mbps 1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.
monStaTxBytesAt2Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of octets transmitted by the station at 2 Mbps rate. monStaTxPktsAt5Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of packets transmitted by the station at 5 Mbps rate.
monStaTxPktsAt6Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of packets transmitted by the station at 6 Mbps rate. monStaTxBytesAt6Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of octets transmitted by the station at 6 Mbps rate.
monStaTxBytesAt18Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of octets transmitted by the station at 18 Mbps rate. monStaTxPktsAt24Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of packets transmitted by the station at 24 Mbps rate.
monStaTxPktsAt48Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of packets transmitted by the station at 48 Mbps rate. monStaTxBytesAt48Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of octets transmitted by the station at 48 Mbps rate.
monStaRxBytesAt1Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of octets received by the station at 1 Mbps rate. monStaRxPktsAt2Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of packets received by the station at 2 Mbps rate.
monStaRxPktsAt11Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of packets received by the station at 11 Mbps rate. monStaRxBytesAt11Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of octets received by the station at 11 Mbps rate.
monStaRxBytesAt12Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of octets received by the station at 12 Mbps rate. monStaRxPktsAt18Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of packets received by the station at 18 Mbps rate.
monStaRxPktsAt36Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of packets received by the station at 36 Mpbs rate. monStaRxBytesAt36Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of octets received by the station at 36 Mpbs rate.
monStaRxPktsAt54Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of packets received by the station at 54 Mbps rate. monStaRxBytesAt54Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of octets received by the station at 54 Mbps rate.
monStaRxBytesAt9Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of octets received by the station at 9 Mbps rate. wlsxMonStaDATypeStatsTable The objects of the wlsx Monitor Station DA Type Statistics table provide station statistics sorted by Destination Address (DA) types. Table 51 MonStaDATypeStatsTable OIDs Object Object ID wlsxMonStaDATypeStatsEntry 1.3.6.1.4.1.14823.2.2.1.6.6.2.3.
monStaTxDABroadcastBytes Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of broadcast bytes transmitted by this station. monStaTxDAMulticastPkts Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of multicast packets transmitted by this station.
wlsxMonStaFrameTypeStatsTable The objects of the wlsx Monitor Station Frame Type Statistics table provide packet and byte counts for monitored stations. The information is sorted by frame type. Table 52 MonStaFrameTypeStatsTable OIDs Object Object ID wlsxMonStaFrameTypeStatsEntry 1.3.6.1.4.1.14823.2.2.1.6.6.2.4.1 wlsxMonStaFrameTypeStatsTable 1 monStaTxMgmtPkts 1.3.6.1.4.1.14823.2.2.1.6.6.2.4.1.1 wlsxMonStaFrameTypeStatsTable 1 monStaTxMgmtBytes 1.3.6.1.4.1.14823.2.2.1.6.6.2.4.1.
monStaTxMgmtBytes Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the transmitted management bytes from a station. monStaTxCtrlPkts Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the transmitted control packets from a station. monStaTxCtrlBytes Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the transmitted control bytes from a station.
monStaRxMgmtPkts Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of received management packets at a station. monStaRxMgmtBytes Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of received management bytes at a station. monStaRxCtrlPkts Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of received control packets at a station.
monStaRxDataBytes Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of received data bytes at a station. wlsxMonStaPktSizeStatsTable The objects of the wlsx Monitor Station Packet Size Statistics table provide packet and byte counts for monitored stations. The information is sorted by packet sizes. Table 53 wlsxMonStaPktSizeStatsTable OIDs Object Object ID wlsxMonStaPktSizeStatsEntry 1.3.6.1.4.1.14823.2.2.1.6.6.2.5.
monStaTxPkts63Bytes Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of packets transmitted by the station that were less than 64 bytes long. monStaTxPkts64To127 Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of packets transmitted by the station that were between 64 and 127 bytes long.
monStaTxPkts1024To1518 Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of packets transmitted by the station that were between 1024 and 1518 bytes long. monStaRxPkts63Bytes Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of packets received by the station that were less than 64 bytes long.
monStaRxPkts512To1023 Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of packets received by the station that were between 512 and 1023 bytes long. monStaRxPkts1024To1518 Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of packets received by the station that were between 1024 and 1518 bytes long.
wlsxMonAPInfoEntry Syntax wlsxMonAPInfoEntry Max-Access not-accessible Status current Description Access Point Info entry Index { monPhyAddress, monRadioNumber, monitoredApBSSID } monAPInfoPhyType Syntax ArubaPhyType Max-Access read-only Status current Description PHY type of the monitored access point. monAPInfoCurrentChannel Syntax Unsigned32 Max-Access read-only Status current Description Channel the monitored access point is using.
monAPInfoRSSI Syntax Integer32 Max-Access read-only Status current Description SNR of the monitored access point. monAPInfoMonitorTime Syntax TimeTicks Max-Access read-only Status current Description This attribute indicates how long the access point has been monitored. monAPInfoInactivityTime Syntax TimeTicks Max-Access read-only Status current Description This attribute indicates how long the access point has been inactive.
monAPInfoStatus Syntax Integer up(1) down(2) Max-Access read-only Status current Description Indicates whether this access point is considered to be up or down. monAPInfoConfidence Syntax Integer32 Max-Access read-only Status current Description Indicates the confidence that a suspected rogue access point is in fact a rogue in terms of percentage. History Added in ArubaOS 3.1.0.0.
monAPInfoHTMode Syntax ArubaHTMode Max-Access read-only Status current Description Indicates the HT mode of the monitored AP, if any. History Added in ArubaOS 3.3.0.0. wlsxMonStationInfoTable The objects of the wlsx Monitor Station Information table provide statistics of all the wireless stations that are monitored. Table 55 wlsxMonStationInfoTable OIDs Object Object ID wlsxMonStationInfoEntry 1.3.6.1.4.1.14823.2.2.1.6.7.2.1.1 wlsxMonStationInfoTable 1 monStaInfoChannelNummonStaInfoB 1.3.6.
monStaInfoChannelNummonStaInfoBSSID Syntax Unsigned32 Max-Access read-only Status current Description The channel the station is currently using. History Updated in ArubaOS 3.1—description. Syntax MacAddress Max-Access read-only Status current Description BSSID of the monitored station. History Updated in ArubaOS 3.1—description. monStaInfoESSID Syntax DisplayString Max-Access read-only Status current Description ESSID of the monitored station. History Updated in ArubaOS 3.
monStaInfoRSSI Syntax Integer32 Max-Access read-only Status current Description SNR of the monitored station. History Updated in ArubaOS 3.1—description. monStaInfoClassification Syntax ArubaStationType Max-Access read-only Status current Description Classification of the monitored station. monStaInfoMonitorTime Syntax TimeTicks Max-Access read-only Status current Description This attribute indicates how long the station has been monitored. History Updated in ArubaOS 3.
monStaInfoSnrSignalPkts Syntax Integer32 Max-Access read-only Status current Description The number of signal packets observed by the monitoring station during this sample time. History Updated in ArubaOS 3.1—description. monStaInfoSnrSampleTime Syntax Integer32 Max-Access read-only Status current Description The sample time in which SNR data was collected.
wlsxMonEventCountTable The objects of the wlsx Monitor Event Count table provide the event ID and the number of events of the event type. Table 56 wlsxMonEventCountTable OIDs Object Object ID wlsxMonEventCountEntry 1.3.6.1.4.1.14823.2.2.1.6.6.2.6.1 wlsxMonEventCountTable 1 monEventID 1.3.6.1.4.1.14823.2.2.1.6.6.2.6.1.1 wlsxMonEventCountEntry 1 monEventCount 1.3.6.1.4.1.14823.2.2.1.6.6.2.6.1.
wlsxMonStationHTRateStatsTable This table contains all the monitored AP Packet and Byte Counts but represented in terms of HT rate categories. Table 57 wlsxMonStationHTRateStatsTable OIDs Object Object ID wlsxMonStationHTRateStatsEntry 1.3.6.1.4.1.14823.2.2.1.6.6.1.6.2.7 wlsxMonStationHTRateStatsTable 1 monStaTxHTPkts 1.3.6.1.4.1.14823.2.2.1.6.6.1.6.2.7.1 wlsxMonStationHTRateStatsEntry 1 monStaTxHTBytes 1.3.6.1.4.1.14823.2.2.1.6.6.1.6.2.7.2 wlsxMonStationHTRateStatsEntry 2 monStaRxHTPkts 1.3.6.
monStaRxHTPkts Syntax Counter32 Max-Access read-only Status current Description The total number of packets received at the indicated rate. History Added in ArubaOS 3.3.0.0. monStaRxHTBytes Syntax Counter32 Max-Access read-only Status current Description The total number of bytes received at the indicated rate. History Added in ArubaOS 3.3.0.0. Dell PowerConnect ArubaOS 5.
| Monitor Dell PowerConnect ArubaOS 5.
Chapter 10 Signal Noise Ratio The Signal Noise Ratio (SNR) module provides information about signal quality and packets. One value of SNR is the signal quality during a sample period. The signal quality affects the quality of the transmitted packets. The available SNR values include signal strength (total, maximum, minimum). Additional information is the number of packets that were transmitted during the sample time. Figure 12 shows the architecture of the SNR MIB relative to 1.3.6.1.4.1.14823 (iso.org.
The SNR MIB contains the following tables. The objects of each table are described in the following sections. Table 58 SNR Tables Table Description wlsxAPSnrTable This table lists SNR information about monitored APs. wlsxStaSnrTable This table lists SNR information about monitored stations. wlsxAPSnrBSSIDTable This table lists SNR information about monitored access points. wlsxStaSnrPhyTable This table lists SNR information about monitored stations.
wlsxAPSnrEntry Syntax wlsxAPSnrEntry Max-Access not-accessible Status current Description Station management entry. Index {monPhyAddress, monRadioNumber, monitoredApBSSID} apSnrAverageSignalStrength Syntax Integer32 Max-Access read-only Status current Description The total signal strength observed by the monitoring station during this sample time.
apSnrSampleTime Syntax Integer32 Max-Access read-only Status current Description The sample time in which this data is collected. wlsxStaSnrTable The objects of the station SNR table provide signal information about the access points connected to this controller. Table 60 wlsxStaSnrTable OIDs Object Object ID wlsxAPSnrEntry 1.3.6.1.4.1.14823.2.2.1.7.1.2.1 wlsxStaSnrTable 1 apSnrAverageSignalStrength 1.3.6.1.4.1.14823.2.2.1.7.1.2.1.1 wlsxStaSnrEntry 1 apSnrSignalPkts 1.3.6.1.4.1.14823.2.2.
Max-Access read-only Status current Description The number of signal packets observed by the monitoring station during this sample time. staSnrHighestRxSignalStrength Syntax Integer32 Max-Access read-only Status current Description The highest signal strength observed by the monitoring station during this sample time.
wlsxAPSnrBSSIDEntry Syntax wlsxAPSnrBSSIDEntry Max-Access not-accessible Status current Description Station management entry. Index {monitoredApBSSID, monPhyAddress, monRadioNumber} apSnrBSSIDAverageSignalStrength Syntax Integer32 Max-Access read-only Status current Description The total signal strength observed by the monitoring station during this sample time.
apSnrBSSIDSampleTime Syntax Integer32 Max-Access read-only Status current Description The sample time in which this data is collected. wlsxStaSnrPhyTable The objects of the wlsx Station SNR PHY table provide information of the monitored stations. Table 62 wlsxStaSnrPhyTable OIDs Object Object ID wlsxStaSnrPhyEntry 1.3.6.1.4.1.14823.2.2.1.7.1.4.1 wlsxStaSnrPhyTable 1 staSnrPhyAverageSignalStrength 1.3.6.1.4.1.14823.2.2.1.7.1.4.1.1 wlsxStaSnrPhyEntry 1 staSnrPhySignalPkts 1.3.6.1.4.1.14823.
wlsxStaSnrPhyEntry Syntax wlsxStaSnrPhyEntry Max-Access not-accessible Status current Description Station management entry. Index {monitoredStaPhyAddress, monPhyAddress, monRadioNumber} staSnrPhyAverageSignalStrength Syntax Integer32 Max-Access read-only Status current Description The total signal strength observed by the monitoring station during this sample time.
staSnrPhySampleTime Syntax Integer32 Max-Access read-only Status current Description The sample time in which this data is collected. Dell PowerConnect ArubaOS 5.
| Signal Noise Ratio Dell PowerConnect ArubaOS 5.
Chapter 11 Switch The Switch module provides statistical information about Dell controllers, including storage and memory utilization, and the wireless stations associated with the access points. Figure 13 shows the architecture of the Switch MIB relative to 1.3.6.1.4.1.14823 (iso.org.dod.internet.private.enterprise.aruba). The Switch MIBs are listed in the file aruba-switch.my. For information about downloading Dell MIB files, see “Downloading MIB Files” on page 23. Figure 13 Switch Hierarchy 1.3.6.1.4.
Table 63 System X Group MIB Objects (Continued) Tables wlsxSwitchLicenseTable This table lists all valid licenses installed on the switch. wlsxSysXProcessorTable This table lists all the processors and the corresponding load. wlsxSysXStorageTable This table lists the storage devices in the switch and their utilization numbers. wlsxSysXMemoryTable This table lists the memory utilization of the switch.
wlsxHostname Syntax DisplayString (Size(1.32)) Max-Access read-only Status current Description Name of the switch. wlsxModelName Syntax DisplayString (Size(1..32)) Max-Access read-only Status current Description Model name of the switch. wlsxSwitchIp Syntax IpAddress Max-Access read-only Status current Description Switch IP as configured by the user. This IP address uniquely identifies the switch.
wlsxSwitchListTable The objects of the wlsx Switch List table list the switches in the domain. Note: This table is only populated on the master switch—information can only be queried from the master switch. If a local switch is queried, an empty table will be returned. Table 65 wlsxSwitchListTable OIDs 228 | Switch Object Object ID wlsxSwitchListEntry 1.3.6.1.4.1.14823.2.2.1.1.1.6.1 wlsxSwitchListTable 1 switchListSwitchIPAddress 1.3.6.1.4.1.14823.2.2.1.1.1.6.1.
wlsxSwitchListEntry Syntax MxSwitchListEntry Max-Access not-accessible Status current Description Switch List Entry. Index { switchListSwitchIPAddress } switchListSwitchIPAddress Syntax IpAddress Max-Access not-accessible Status current Description P Address of the switch. switchListSwitchRole Syntax Integer master(1) local(2) standbymaster(3) Max-Access read-only Status current Description Role of the switch.
Table 66 wlsxSwitchLicenseTable OIDs (Continued) 230 | Switch Object Object ID licenseIndex 1.3.6.1.4.1.14823.2.2.1.1.1.8.1.1 wlsxLicenseEntry 1 licenseKey 1.3.6.1.4.1.14823.2.2.1.1.1.8.1.2 wlsxLicenseEntry 2 licenseInstalled 1.3.6.1.4.1.14823.2.2.1.1.1.8.1.3 wlsxLicenseEntry 3 licenseExpires 1.3.6.1.4.1.14823.2.2.1.1.1.8.1.4 wlsxLicenseEntry 4 licenseFlags 1.3.6.1.4.1.14823.2.2.1.1.1.8.1.5 wlsxLicenseEntry 5 licenseService 1.3.6.1.4.1.14823.2.2.1.1.1.8.1.
wlsxLicenseEntry Syntax LicenseEntry Max-Access not-accessible Status current Description License Entry. Index { licenseIndex } licenseIndex Syntax Integer32 Max-Access not-accessible Status current Description License ID number. licenseKey Syntax DisplayString Max-Access read-only Status current Description License Key. licenseInstalled Syntax DisplayString Max-Access read-only Status current Description License installation time.
licenseFlags Syntax DisplayString Max-Access read-only Status current Description License flags E – enabled A – auto-generated R – reboot required to activate licenseService Syntax DisplayString Max-Access read-only Status current Description The service enabled by this license. wlsxSysXProcessorTable The objects of the wlsx Sys XProcessor table list all the processors and the corresponding load.
wlsxSysXProcessorEntry Syntax wlsxSysXProcessorEntry Max-Access not-accessible Status current Description An entry for one processor contained by the switch. History Added in ArubaOS 2.3. sysXProcessorID Syntax Integer32 Max-Access not-accessible Status current Description Processor Index. History Added in ArubaOS 2.3. sysXProcessorDescr Syntax DisplayString(Size(0..64)) Max-Access read-only Status current Description Description of the processor. History Added in ArubaOS 2.3.
The objects of the wlsx Sys XStorage table list the storage devices in the switch. Table 68 wlsxSysXStorageTable OIDs 234 | Switch Object Object ID wlsxSysXStorageEntry 1.3.6.1.4.1.14823.2.2.1.1.1.10.1 wlsxSysXStorageTable 1 sysXStorageIndex 1.3.6.1.4.1.14823.2.2.1.1.1.10.1.1 wlsxSysXStorageEntry 1 sysXStorageType 1.3.6.1.4.1.14823.2.2.1.1.1.10.1.2 wlsxSysXStorageEntry 2 sysXStorageSize 1.3.6.1.4.1.14823.2.2.1.1.1.10.1.3 wlsxSysXStorageEntry 3 sysXStorageUsed 1.3.6.1.4.1.14823.2.2.1.1.1.
wlsxSysXStorageEntry Syntax wlsxSysXStorageEntry Max-Access not-accessible Status current Description An entry for one long-term storage device contained by the switch. History Added in ArubaOS 2.3. sysXStorageIndex Syntax Integer32 Max-Access not-accessible Status current Description The storage index. History Added in ArubaOS 2.3. sysXStorageType Syntax Integer ram(1) flashMemory(2) Max-Access read-only Status current Description The storage type is indicated by Syntax.
Max-Access read-only Status current Description The size of the storage file system in MB. History Added in ArubaOS 2.3. sysXStorageName Syntax DisplayString(Size(0..64)) Max-Access read-only Status current Description The name of the storage file system. History Added in ArubaOS 2.3. wlsxSysXMemoryTable The objects of the wlsx Sys XMemory table describes the memory utilization of the switch. Table 69 wlsxSysXMemoryTable OIDs 236 | Switch Object Object ID wlsxSysXMemoryEntry 1.3.6.1.
wlsxSysXMemoryEntry Syntax WlsxSysXMemoryEntry Max-Access not-accessible Status current Description An entry for one memory region on the switch. Currently, only the CP region is monitored. History Added in ArubaOS 2.3. ysysXMemoryIndex Syntax Integer32 Max-Access not-accessible Status current Description Memory index. History Added in ArubaOS 2.3. sysXMemorySize Syntax Integer32 Max-Access read-only Status current Description Total memory in KB. History Added in ArubaOS 2.3.
Status current Description Free memory in KB. History Added in ArubaOS 2.3. wlsxSwitchLicenseSerialNumber Syntax DisplayString Max-Access read-only Status current Description The license serial number of the switch. wlsxSwitchUserTable The objects of the wlsx Switch User table list all the users (wired and wireless) that are connected to the switch. Users are identified by their IP addresses. Table 70 wlsxSwitchUserTable OIDs 238 | Switch Object Object ID wlsxSwitchUserEntry 1.3.6.1.4.1.
wlsxSwitchUserEntry Syntax MxSwitchUserEntry Max-Access not-accessible Status current Description User entry. Index { userIpAddress } userIpAddress Syntax IpAddress Max-Access not-accessible Status current Description IP address from which the user connected to the switch. userPhyAddress Syntax MacAddress Max-Access read-only Status current Description Physical address of the station from which the user connected to the switch. userName Syntax DisplayString(Size(0..
userUpTime Syntax TimeTicks Max-Access read-only Status current Description Time since the user was connected to the switch. userAuthenticationMethod Syntax Integer none(1) other(2) web(3) dot1x(4) vpn(5) mac(6) Max-Access read-only Status current Description Authentication mechanism used by the user to connect to the switch. userLocation Syntax DisplayString(Size(0..32)) Max-Access read-only Status current Description Location of the access point (in Building.Floor....
Description VLAN on which the user is connected to the switch. Dell PowerConnect ArubaOS 5.
userConnectedSlot Syntax Integer32 Max-Access read-only Status current Description Slot on switch where the user connection terminates. userConnectedPort Syntax Integer32 Max-Access read-only Status current Description Port on switch where the user connection terminates. userBWContractName Syntax DisplayString(Size(0..32)) Max-Access read-only Status current Description Name of the bandwidth contract applied to this user.
Table 71 wlsxSwitchUser6Table OIDs (Continued) Object Object ID user6PhyAddress wlsxSwitchUser6Entry 2 user6Name wlsxSwitchUser6Entry 3 user6Role wlsxSwitchUser6Entry 4 user6UpTime wlsxSwitchUser6Entry 5 user6AuthenticationMethod wlsxSwitchUser6Entry 6 user6Location wlsxSwitchUser6Entry 7 user6ServerName wlsxSwitchUser6Entry 8 user6ConnectedVlan wlsxSwitchUser6Entry 9 user6ConnectedSlot wlsxSwitchUser6Entry 10 user6ConnectedPort wlsxSwitchUser6Entry 11 user6BWContractName wlsxSwitchUs
wlsxSwitchUser6Entry Syntax wlsxSwitchUser6Entry Max-Access not-accessible Status current Description User Entr Index { user6IpAddress } History Added in ArubaOS 3.3.0.0. user6IpAddress Syntax DisplayString(SIZE(0..32)) Max-Access not-accessible Status current Description IPv6 Address from which the user connected to the switch. History Added in ArubaOS 3.3.0.0.
Max-Access read-only Status current Description The Role configured for this user. History Added in ArubaOS 3.3.0.0. Dell PowerConnect ArubaOS 5.
user6UpTime Syntax TimeTicks Max-Access read-only Status current Description Time since the user is connected to the switch. History Added in ArubaOS 3.3.0.0. user6AuthenticationMethod Syntax Integer none(1) other(2) web(3) dot1x(4) vpn(5) mac(6) Max-Access read-only Status current Description Authentication mechanism used by the user to connect to the switch. History Added in ArubaOS 3.3.0.0. user6Location Syntax DisplayString(SIZE(0..
user6ConnectedVlan Syntax Integer32 Max-Access read-only Status current Description Vlan on which the user is connected to the switch. History Added in ArubaOS 3.3.0.0. user6ConnectedSlot Syntax Integer32 Max-Access read-only Status current Description Slot on switch, where the user connection terminates. History Added in ArubaOS 3.3.0.0. user6ConnectedPort Syntax Integer32 Max-Access read-only Status current Description Port on switch, where the user connection terminates.
Max-Access read-only Status current Description Indicates how the Bandwidth Contract is used. History Added in ArubaOS 3.3.0.0. wlsxSwitchStationMgmtTable The objects of the wlsx Switch Station Management table provide information about the wireless stations associated with the access points connected to this switch. Table 72 wlsxSwitchStationMgmtTable OIDs 248 | Switch Object Object ID wlsxSwitchStationMgmtEntry 1.3.6.1.4.1.14823.2.2.1.1.2.2.1 wlsxSwitchStationMgmtTable 1 staPhyAddress 1.
wlsxSwitchStationMgmtEntry Syntax MxSwitchStationMgmtEntry Max-Access not-accessible Status current Description Station management entry. Index { staPhyAddress, staAccessPointBSSID } staPhyAddress Syntax MacAddress Max-Access not-accessible Status current Description The physical address of the station. staAccessPointBSSID Syntax MacAddress Max-Access not-accessible Status current Description BSSID of the access point through which the station is connected to the switch.
staAssociationID Syntax Unsigned32 Max-Access read-only Status current Description Association ID with which the station is associated with this system. staAccessPointESSID Syntax DisplayString(Size(0..64)) Max-Access read-only Status current Description ESSID of the access point. staSignalToNoiseRatio Syntax Integer32 Max-Access read-only Status current Description SNR for the BSSID.
staReceiveRate Syntax Integer rate1Mbps(1) rate2Mbps(2) rate5point5Mbps(3) rate6Mbps(4) rate9Mbps(5) rate11Mbps(6) rate12Mbps(7) rate18Mbps(8) rate24Mbps(9) rate36Mbps(10) rate48Mbps(11) rate54Mbps(12) Max-Access read-only Status current Description The receive rate of the channel. wlsxSwitchStationStatsTable The objects of the wlsx Switch Station Stats table provide information about the statistics of the wireless stations associated with the access points connected to this switch.
wlsxSwitchStationStatsEntry Syntax MxSwitchStationStatsEntry Max-Access not-accessible Status current Description Station statistics entry. Index { staPhyAddress, staAccessPointBSSID } staTxPackets Syntax Counter32 Max-Access read-only Status current Description Total packets transmitted by the station. staTxBytes Syntax Counter32 Max-Access read-only Status current Description Total bytes transmitted by the station.
staBwRate Syntax Integer32 Max-Access read-only Status current Description Bandwidth rate in Kbps of the station. staFrameRetryRate Syntax Integer32 Max-Access read-only Status current Description Station frame retry rate. staFrameLowSpeedRate Syntax Integer32 Max-Access read-only Status current Description Station frame low speed rate. staFrameNonUnicastRate Syntax Integer32 Max-Access read-only Status current Description Station frame non-unicast packet rate.
Max-Access read-only Status current Description Station frame receive error rate. wlsxAccessPointInfoGroup The wlsx Access Point Info group contains tables that provide access point information. Table 74 wlsxAccessPointInfoGroup OIDs Object Object ID wlsxSwitchTotalNumAccessPoints 1.3.6.1.4.1.14823.2.2.1.1.3.1. wlsxAccessPointInfoGroup 2 wlsxSwitchTotalNumStationsAssociated 1.3.6.1.4.1.14823.2.2.1.1.3.
Table 75 wlsxSwitchAccessPointTable OIDs (Continued) Object Object ID apPhyType 1.3.6.1.4.1.14823.2.2.1.1.3.3.1.6 wlsxSwitchAccessPointEntry 6 apType 1.3.6.1.4.1.14823.2.2.1.1.3.3.1.7 wlsxSwitchAccessPointEntry 7 apCurrentChannel 1.3.6.1.4.1.14823.2.2.1.1.3.3.1.8 wlsxSwitchAccessPointEntry 8 apLocation 1.3.6.1.4.1.14823.2.2.1.1.3.3.1.9 wlsxSwitchAccessPointEntry 9 apTotalTime 1.3.6.1.4.1.14823.2.2.1.1.3.3.1.10 wlsxSwitchAccessPointEntry 10 apInactiveTime 1.3.6.1.4.1.14823.2.2.1.1.3.3.1.
wlsxSwitchAccessPointEntry Syntax MxSwitchAccessPointEntry Max-Access not-accessible Status current Description Station management entry. Index { apBSSID } apBSSID Syntax MacAddress Max-Access not-accessible Status current Description The physical address of the access point. apESSID Syntax DisplayString(Size(0..64)) Max-Access read-only Status current Description ESSID of the access point.
apIpAddress Syntax IpAddress Max-Access read-only Status current Description Address of the access point. apPhyType Syntax Integer dot11a(1) dot11b(2) dot11g(3) Max-Access read-only Status current Description Physical layer protocol support of the access point. apType Syntax Integer ap(1) am(2) Max-Access read-only Status current Description Indicates whether the access point is an air monitor or an access point. apCurrentChannel Syntax Integer(1..
apTotalTime Syntax TimeTicks Max-Access read-only Status current Description Time since the access point was connected to the switch. apInactiveTime Syntax TimeTicks Max-Access read-only Status current Description Time since the access point has been inactive. apLoadBalancing Syntax TruthValue Max-Access read-only Status current Description Indicates whether load balancing is enabled or not.
apTransmitRate Syntax Integer rate1Mbps(1) rate2Mbps(2) rate5point5Mbps(3) rate6Mbps(4) rate9Mbps(5) rate11Mbps(6) rate12Mbps(7) rate18Mbps(8) rate24Mbps(9) rate36Mbps(10) rate48Mbps(11) rate54Mbps(12) Max-Access read-only Status current Description Indicates transmit rate of the channel.
Table 76 wlsxSwitchGlobalAPTable OIDs 260 | Switch Object Object ID wlsxSwitchGlobalAPEntry 1.3.6.1.4.1.14823.2.2.1.1.3.4.1 wlsxSwitchGlobalAPTable 1 globalAPLocation 1.3.6.1.4.1.14823.2.2.1.1.3.4.1.1 wlsxSwitchGlobalAPEntry 1 globalAPAddress 1.3.6.1.4.1.14823.2.2.1.1.3.4.1.2 wlsxSwitchGlobalAPEntry 2 globalAPLocalSwitch 1.3.6.1.4.1.14823.2.2.1.1.3.4.1.3 wlsxSwitchGlobalAPEntry 3 globalAPdot11aPhyAddr 1.3.6.1.4.1.14823.2.2.1.1.3.4.1.4 wlsxSwitchGlobalAPEntry 4 globalAPdot11bPhyAddr 1.3.
wlsxSwitchGlobalAPEntry Syntax MxSwitchGlobalAPEntry Max-Access not-accessible Status current Description Station Management Entry. Index { globalAPLocation, globalAPAddress } globalAPLocation Syntax DisplayString(Size(0..32)) Max-Access not-accessible Status current Description Physical location of the AP, defined in building.floor.location format. globalAPAddress Syntax IpAddress Max-Access not-accessible Status current Description Address of the access point.
globalAPdot11bPhyAddr Syntax MacAddress Max-Access read-only Status current Description Physical MAC address of the module supporting dot11b in the access point. AP can have support for both dot11a and dot11b physical layer. tvglobalAPState Syntax Integer(1..7) Max-Access read-only Status current Description Values are deprecated.
Table 77 wlsxSwitchAccessPointStatsTable OIDs (Continued) Object Object ID apBSSTxBytes 1.3.6.1.4.1.14823.2.2.1.1.3.5.1.9 wlsxSwitchAccessPointStatsEntry 9 apBSSRxPackets 1.3.6.1.4.1.14823.2.2.1.1.3.5.1.10 wlsxSwitchAccessPointStatsEntry 10 apBSSRxBytes 1.3.6.1.4.1.14823.2.2.1.1.3.5.1.11 wlsxSwitchAccessPointStatsEntry 11 apBSSBwRate 1.3.6.1.4.1.14823.2.2.1.1.3.5.1.12 wlsxSwitchAccessPointStatsEntry 12 apBSSFrameRetryRate 1.3.6.1.4.1.14823.2.2.1.1.3.5.1.
wlsxSwitchAccessPointStatsEntry Syntax MxSwitchAccessPointStatsEntry Max-Access not-accessible Status current Description Access point stats entry. Index { apBSSID } apStatsChannel Syntax Integer(1..165) Max-Access read-only Status current Description Channel on which the access point is operating. apChannelBwRate Syntax Integer32 Max-Access read-only Status current Description Bandwidth rate in Kbps of the access point channel.
apChannelFrameNonUnicastRate Syntax Integer32 Max-Access read-only Status current Description Access point channel frame non-unicast packet rate. apChannelFrameFragmentationRate Syntax Integer32 Max-Access read-only Status current Description Access point channel frame fragmentation rate. apChannelFrameReceiveErrorRate Syntax Integer32 Max-Access read-only Status current Description Access point channel frame receive error rate.
| Switch Max-Access read-only Status current Description Total packets received by the access point on this BSSID. Dell PowerConnect ArubaOS 5.
apBSSRxBytes Syntax Counter32 Max-Access read-only Status current Description Total bytes received by the access point on this BSSID. apBSSBwRate Syntax Integer32 Max-Access read-only Status current Description Bandwidth rate in Kbps of the access point on this BSSID. apBSSFrameRetryRate Syntax Integer32 Max-Access read-only Status current Description Frame retry rate on this BSSID.
Max-Access read-only Status current Description Frame fragmentation rate on this BSSID. apBSSFrameReceiveErrorRate Syntax Integer32 Max-Access read-only Status current Description Frame receive error rate on this BSSID. wlsxSwitchTraps Group The objects of the wlsx Switch Traps group define the objects (variables) that may be returned with a trap listed in the swith traps (see Table 79 on page 277). Table 78 wlsxSwitchTraps OIDs 268 | Switch Object Object ID wlsxAuthServerName 1.3.6.1.4.
Table 78 wlsxSwitchTraps OIDs (Continued) Object Object ID wlsxApTxPower 1.3.6.1.4.1.14823.2.2.1.1.100.100.22 wlsxSwitchTrapObjectsGroup 22 wlsxESIServerGrpName 1.3.6.1.4.1.14823.2.2.1.1.100.100.23 wlsxSwitchTrapObjectsGroup 23 wlsxESIServerName 1.3.6.1.4.1.14823.2.2.1.1.100.100.24 wlsxSwitchTrapObjectsGroup 24 wlsxESIServerIpaddress 1.3.6.1.4.1.14823.2.2.1.1.100.100.25 wlsxSwitchTrapObjectsGroup 25 wlsxLicenseDaysRemaining 1.3.6.1.4.1.14823.2.2.1.1.100.100.
wlsxAuthServerName Syntax DisplayString(Size(0..64)) Max-Access read-only Status current Description This object is used in the traps to indicate the authentication server used for authentication. wlsxAuthServerTimeout Syntax Integer32 Max-Access read-only Status current Description This object is used in the traps to indicate the authentication server timeout.
Max-Access read-only Status current Description This object is used in the traps to indicate the voltage value in float. Dell PowerConnect ArubaOS 5.
wlsxTemperatureValue Syntax DisplayString(Size(0..64)) Max-Access read-only Status current Description This object is used in the traps to indicate temperature value. wlsxProcessName Syntax DisplayString(Size(0..64)) Max-Access read-only Status current Description This object is used in the traps to indicate a process name. wlsxStationMacAddress Syntax MacAddress Max-Access read-only Status current Description The physical address of the station.
Status current Description This object is used in a trap to identify a spoofed IP address. Dell PowerConnect ArubaOS 5.
wlsxSpoofedOldPhyAddress Syntax MacAddress Max-Access read-only Status current Description This object is used in a trap to identify a old MAC address. wlsxSpoofedNewPhyAddress Syntax MacAddress Max-Access read-only Status current Description This object is used in a trap to identify a new MAC address. wlsxDBName Syntax DisplayString(Size(0..64)) Max-Access read-only Status current Description This object is used in a trap to identify name of the database.
wlsxDBType Syntax Integer mssql(1) mysql(2) Max-Access read-only Status current Description This object is used in a trap to identify the port of the user. wlsxVrID Syntax Integer32 Max-Access read-only Status current Description This object contains the virtual router identifier. wlsxVrMasterIp Syntax IpAddress Max-Access read-only Status current Description This object contains the master IP address.
wlsxESIServerGrpName Syntax DisplayString(Size(0..64)) Max-Access read-only Status current Description This object represents the External Services Interface (ESI) Server Group name. wlsxESIServerName Syntax DisplayString(Size(0..64)) Max-Access read-only Status current Description This object represents the External Services Interface (ESI) Server name.
Switch Traps–Notifications Notification provides an acknowledge to the device that sent the trap message. Table 79 Switch Trap Notification OIDs Object Object OID wlsxSwitchIPChanged 1.3.6.1.4.1.14823.2.2.1.1.100.1001 wlsxSwitchTraps 1001 wlsxSwitchRoleChange 1.3.6.1.4.1.14823.2.2.1.1.100.1002 wlsxSwitchTraps 1002 wlsxUserEntryCreated 1.3.6.1.4.1.14823.2.2.1.1.100.1003 wlsxSwitchTraps 1003 wlsxUserEntryDeleted 1.3.6.1.4.1.14823.2.2.1.1.100.
Table 79 Switch Trap Notification OIDs (Continued) 278 | Switch Object Object OID wlsxChannelChanged 1.3.6.1.4.1.14823.2.2.1.1.100.1033 wlsxSwitchTraps 1033 wlsxStationAddedToBlackList 1.3.6.1.4.1.14823.2.2.1.1.100.1034 wlsxSwitchTraps 1034 wlsxStationRemovedFromBlackList 1.3.6.1.4.1.14823.2.2.1.1.100.1035 wlsxSwitchTraps 1035 wlsxIpSpoofingDetected 1.3.6.1.4.1.14823.2.2.1.1.100.1036 wlsxSwitchTraps 1036 wlsxDBCommunicationFailure 1.3.6.1.4.1.14823.2.2.1.1.100.
wlsxSwitchIPChanged Objects { wlsxSwitchIp } Status current Description A trap which indicates that the switch IP address has changed. wlsxSwitchRoleChange Objects { wlsxSwitchRole } Status current Description A trap which indicates that the role of the switch has changed in the domain—authentication traps. wlsxUserEntryCreated Objects { userPhyAddress } Status current Description A trap which indicates that a new user is created.
| Switch Status current Description A trap which indicates that a user authentication has failed. Dell PowerConnect ArubaOS 5.
wlsxAuthServerReqTimedOut Objects { wlsxAuthServerName } Status current Description A trap which indicates that the authentication server request timed out. wlsxAuthServerTimedOut Objects { wlsxAuthServerName, wlsxAuthServerTimeout } Status current Description A trap which indicates that the authentication server timed out. wlsxAuthServerIsUp Objects { wlsxAuthServerName } Status current Description A trap which indicates that the authentication server is up.
wlsxFanFailure Objects { wlsxFanNumber } Status current Description A trap which indicates that the fan has failed. wlsxOutOfRangeVoltage Objects { wlsxVoltageType, wlsxVoltageValue } Status current Description A trap which indicates that the switch received out-of-range voltage. wlsxOutOfRangeTemperature Objects { wlsxTemperatureValue } Status current Description A trap which indicates that the temperature is out of bounds.
wlsxProcessExceedsMemoryLimits Objects { wlsxProcessName } Status current Description A trap which indicates that a process is consuming large amounts of memory. wlsxLowOnFlashSpace Status current Description A trap which indicates that the switch is running low on flash space. wlsxLowMemory Status current Description A trap which indicates that the system free memory is low. wlsxFanTrayRemoved Status current Description A trap which indicates that the fan tray is removed.
wlsxAccessPointIsUp Objects { apLocation, apIpAddress } Status current Description Access point up trap—a trap which indicates that an access point at location apLocation and address apIpAddress is up. wlsxAccessPointIsDown Objects { apLocation, apIpAddress } Status current Description Access point down trap—a trap which indicates that an access point at location apLocation and address apIpAddress is down.
wlsxIpSpoofingDetected Objects { wlsxSpoofedIpAddress, wlsxSpoofedOldPhyAddress, wlsxSpoofedNewPhyAddress } Status current Description A trap indicating that the switch detected IP spoofing. wlsxDBCommunicationFailure Objects { wlsxDBName, wlsxDBUserName, wlsxDBIpAddress, wlsxDBType } Status current Description A trap to indicate that communication with database failed.
wlsxLicenseExpiry Objects { wlsxLicenseDaysRemaining } Status current Description A trap which indicates that one or more licenses on the switch will expire in days. IPv6 Authentication Traps wlsxUser6EntryCreated Objects { user6PhyAddress } Status current Description A trap which indicates that a New user is created. History Added in ArubaOS 3.3.0.0.
wlsxUser6AuthenticationFailed Objects { user6PhyAddress } Status current Description A trap which indicates that a user authentication has failed. History Added in ArubaOS 3.3.0.0. Dell PowerConnect ArubaOS 5.
| Switch Dell PowerConnect ArubaOS 5.
Chapter 12 System External The System External module provides information about resource usages such as memory and CPU. Figure 14 shows the architecture of the System External MIB relative to 1.3.6.1.4.1.14823 (iso.org.dod.internet.private.enterprise.aruba). The System External MIBs are listed in the file aruba-systemext.my. For information about downloading Dell MIB files, see “Downloading MIB Files” on page 23. Figure 14 Stem Ext Hierarchy 1.3.6.1.4.1.
The System EXT MIB contains the following tables. The objects of each table are described in the following sections. Table 80 System External Group Tables Table Description wlsxSysExtProcessorTable The table of processors contained by the controller. wlsxSysExtStorageTable The table of storage devices contained by the controller. wlsxSysExtMemoryTable The memory status of the controller. wlsxSysExtCardTable The table of hardware modules in the controller.
wlsxSysExtModelName Syntax DisplayString (Size(1..32)) Max-Access read-only Status current Description Model name of the controller. History Added in ArubaOS 2.3. wlsxSysExtSwitchRole Syntax ArubaSwitchRole Max-Access read-only Status current Description Role of this controller in the Dell Switch Domain. History Added in ArubaOS 2.3. wlsxSysExtSwitchMasterIp Syntax IpAddress Max-Access read-only Status current Description Switch IP of the master controller.
Status current Description The base MAC address of the switch. History Added in ArubaOS 2.3. 292 | System External Dell PowerConnect ArubaOS 5.
wlsxSysExtFanTrayAssemblyNumber Syntax DisplayString(Size(0..64)) Max-Access read-only Status current Description Assembly number of the fan tray. History Added in ArubaOS 2.3. wlsxSysExtFanTraySerialNumber Syntax DisplayString(Size(0..64)) Max-Access read-only Status current Description Serial number of the fan tray. History Added in ArubaOS 2.3. wlsxSysExtInternalTemparature Syntax DisplayString(Size(0..
Status current Description The number of licenses installed on the controller. History Added in ArubaOS 2.3. 294 | System External Dell PowerConnect ArubaOS 5.
wlsxSysExtMMSCompatLevel Syntax Integer32 Max-Access read-only Status current Description Lists the compatibility level of this controller with the MMS. History Added in version 3.1 wlsxSysExtMMSConfigID Syntax Integer32 Max-Access read-only Status current Description This object represents the value of the MMS Configuration ID in the controller. History Added in version 3.
Status current Description The reason for the last controller reload. History Added in version 2.5 wlsxSysExtLastStatsReset Syntax TimeTicks Max-Access read-only Status current Description Last time controller stats was reset. History Added in version 3.2 wlsxSysExtProcessorTable The objects of the wlsx System External Process table list all the processors and the corresponding loads. Table 81 wlsxSysExtProcessorTable OIDs Object Object ID wlsxSysExtProcessorEntry 1.3.6.1.4.1.14823.2.2.
wlsxSysExtProcessorEntry Syntax wlsxSysExtProcessorEntry Max-Access not-accessible Status current Description An entry for one processor contained by the controller. History Added in ArubaOS 2.3. sysExtProcessorID Syntax Integer32 Max-Access not-accessible Status current Description Processor index. History Added in ArubaOS 2.3. sysExtProcessorDescr Syntax DisplayString(Size(0..64)) Max-Access read-only Status current Description Description of the processor.
The objects of the wlsx System External Storage table provide information of the storage devices in the controller. Table 82 wlsxSysExtStorageTable OIDs Object Object ID wlsxSysExtStorageEntry 1.3.6.1.4.1.14823.2.2.1.2.1.14.1 wlsxSysExtStorageTable 1 sysExtStorageIndex 1.3.6.1.4.1.14823.2.2.1.2.1.14.1.1 wlsxSysExtStorageEntry 1 sysExtStorageType 1.3.6.1.4.1.14823.2.2.1.2.1.14.1.2 wlsxSysExtStorageEntry 2 sysExtStorageSize 1.3.6.1.4.1.14823.2.2.1.2.1.14.1.
sysExtStorageIndex Syntax Integer32 Max-Access not-accessible Status current Description Index of the table. History Added in ArubaOS 2.3. sysExtStorageType Syntax Integer ram(1) flashMemory(2) Max-Access read-only Status current Description Type of the storage. History Added in ArubaOS 2.3. sysExtStorageSize Syntax Integer32 Max-Access read-only Status current Description Total size of the storage file system in MB. History Added in ArubaOS 2.3.
Max-Access read-only Status current Description Name of the storage file system. History Added in ArubaOS 2.3. wlsxSysExtMemoryTable The objects of the wlsx System External Memory table describe the memory utilization of the controller. Object Object ID wlsxSysExtMemoryEntry 1.3.6.1.4.1.14823.2.2.1.2.1.15.1 wlsxSysExtMemoryTable 1 sysExtMemoryIndex 1.3.6.1.4.1.14823.2.2.1.2.1.15.1.1 wlsxSysExtMemoryEntry 1 sysExtMemorySize 1.3.6.1.4.1.14823.2.2.1.2.1.15.1.
wlsxSysExtMemoryEntry Syntax wlsxSysExtMemoryEntry Max-Access not-accessible Status current Description An entry for one memory region on the controller. Currently, only the control processor memory is monitored. History Added in ArubaOS 2.3. Update in ArubaOS 3.2.0.0.—description. sysExtMemoryIndex Syntax Integer32 Max-Access not-accessible Status current Description Index of the table. History Added in ArubaOS 2.3.
sysExtMemoryUsed Syntax Integer32 Max-Access read-only Status current Description Used memory in KB. History Added in ArubaOS 2.3. sysExtMemoryFree Syntax Integer32 Max-Access read-only Status current Description Free memory in KB. History Added in ArubaOS 2.3. wlsxSysExtCardTable The objects of the wlsx System External Card table list the different hardware modules in the controller. Table 83 wlsxSysExtCardTable Objects Object ID wlsxSysExtCardEntry 1.3.6.1.4.1.14823.2.2.1.2.1.16.
wlsxSysExtCardEntry Syntax wlsxSysExtCardEntry Max-Access not-accessible Status current Description An entry for one hardware module in the controller. History Added in ArubaOS 2.3. sysExtCardSlot Syntax Integer32 Max-Access not-accessible Status current Description Slot in which this card is located, offset by one. For the user-visible slot number, see sysExtCardUserSlot. History Added in ArubaOS 2.3.
Status current Description Number of fast ethernet ports on the card. History Added in ArubaOS 2.3. 304 | System External Dell PowerConnect ArubaOS 5.
sysExtCardNumOfGigPorts Syntax Integer32 Max-Access read-only Status current Description Number of gigabit ethernet ports on the card. History Added in ArubaOS 2.3. sysExtCardSerialNo Syntax DisplayString(Size(0..64)) Max-Access read-only Status current Description Serial number of the card. History Added in ArubaOS 2.3. sysExtCardAssemblyNo Syntax DisplayString(Size(0..64)) Max-Access read-only Status current Description Assembly number of the card. History Added in ArubaOS 2.
Status current Description Hardware revision of the card. History Added in ArubaOS 2.3. 306 | System External Dell PowerConnect ArubaOS 5.
sysExtCardFpgaRevision Syntax DisplayString(Size(0..64)) Max-Access read-only Status current Description FPGA revision number. History Added in ArubaOS 2.3. sysExtCardSwitchChip Syntax DisplayString(Size(0..64)) Max-Access read-only Status current Description Switching chip version. History Added in ArubaOS 2.3. sysExtCardStatus Syntax ArubaActiveState Max-Access read-only Status current Description Status of the card. History Added in ArubaOS 2.3.
The objects of the wlsx System External Fan table list the fans of the controller. Table 84 wlsxSysExtFanTable OID Object Object ID wlsxSysExtFanEntry 1.3.6.1.4.1.14823.2.2.1.2.1.17.1 wlsxSysExtFanTable 1 sysExtFanIndex 1.3.6.1.4.1.14823.2.2.1.2.1.17.1 wlsxSysExtFanEntry 1 sysExtFanStatus 1.3.6.1.4.1.14823.2.2.1.2.1.17.2 wlsxSysExtFanEntry 2 wlsxSysExtFanEntry Syntax wlsxSysExtFanEntry Max-Access not-accessible Status current Description An entry for one fan. History Added in ArubaOS 2.
Status current Description The table of power supplies in the controller. History Added in ArubaOS 2.3. Table 85 wlsxSysExtPowerSupplyTable Object Object ID wlsxSysExtPowerSupplyEntry 1.3.6.1.4.1.14823.2.2.1.2.1.18.1 wlsxSysExtPowerSupplyTable 1 sysExtPowerSupplyIndex 1.3.6.1.4.1.14823.2.2.1.2.1.18.1.1 wlsxSysExtPowerSupplyEntry 1 sysExtPowerSupplyStatus 1.3.6.1.4.1.14823.2.2.1.2.1.18.1.2 wlsxSysExtPowerSupplyEntry 2 Dell PowerConnect ArubaOS 5.
wlsxSysExtPowerSupplyEntry Syntax wlsxSysExtPowerSupplyEntry Max-Access not-accessible Status current Description An entry for one power supply. History Added in ArubaOS 2.3. sysExtPowerSupplyIndex Syntax Integer32 Max-Access not-accessible Status current Description Index of the table. History Added in ArubaOS 2.3. sysExtPowerSupplyStatus Syntax ArubaActiveState Max-Access read-only Status current Description Status of the power supply. History Added in ArubaOS 2.3.
Table 86 wlsxSysExtSwitchListTable OIDs (Continued) Object Object ID sysExtSwitchIPAddress 1.3.6.1.4.1.14823.2.2.1.2.1.19.1.1 wlsxSysExtSwitchListEntry 1 sysExtSwitchRole 1.3.6.1.4.1.14823.2.2.1.2.1.19.1.2 wlsxSysExtSwitchListEntry 2 sysExtSwitchLocation 1.3.6.1.4.1.14823.2.2.1.2.1.19.1.3 wlsxSysExtSwitchListEntry 3 sysExtSwitchSWVersion 1.3.6.1.4.1.14823.2.2.1.2.1.19.1.4 wlsxSysExtSwitchListEntry 4 sysExtSwitchStatus 1.3.6.1.4.1.14823.2.2.1.2.1.19.
wlsxSysExtSwitchListEntry Syntax wlsxSysExtSwitchListEntry Max-Access not-accessible Status current Description Switch list entry. Index { sysExtSwitchIPAddress} History Added in ArubaOS 2.3. sysExtSwitchIPAddress Syntax IpAddress Max-Access not-accessible Status current Description IP address of the controller. History Added in ArubaOS 2.3. sysExtSwitchRole Syntax ArubaSwitchRole Max-Access read-only Status current Description Role of the switch. History Added in ArubaOS 2.3.
Max-Access read-only Status current Description Software version the controller is running. History Added in ArubaOS 2.3. sysExtSwitchStatus Syntax ArubaActiveState Max-Access read-only Status current Description Status of the controller. History Added in ArubaOS 2.3. sysExtSwitchName Syntax DisplayString(Size(0..128)) Max-Access read-only Status current Description Host name of the controller. History Added in ArubaOS 2.3. sysExtSwitchSerNo Syntax DisplayString(Size(0..
Table 87 wlsxSysExtSwitchLicenseTable OIDs (Continued) Object Object ID sysExtLicenseKey 1.3.6.1.4.1.14823.2.2.1.2.1.20.1.2 wlsxSysExtLicenseEntry 2 sysExtLicenseInstalled 1.3.6.1.4.1.14823.2.2.1.2.1.20.1.3 wlsxSysExtLicenseEntry 3 sysExtLicenseExpires 1.3.6.1.4.1.14823.2.2.1.2.1.20.1.4 wlsxSysExtLicenseEntry 4 sysExtLicenseFlags 1.3.6.1.4.1.14823.2.2.1.2.1.20.1.5 wlsxSysExtLicenseEntry 5 sysExtLicenseService 1.3.6.1.4.1.14823.2.2.1.2.1.20.1.
wlsxSysExtLicenseEntry Syntax wlsxSysExtLicenseEntry Max-Access not-accessible Status current Description License entry. Index { sysExtLicenseIndex } History Added in ArubaOS 2.3. sysExtLicenseIndex Syntax Integer32 Max-Access not-accessible Status current Description License ID number. History Added in ArubaOS 2.3. sysExtLicenseKey Syntax DisplayString Max-Access read-only Status current Description License key. History Added in ArubaOS 2.3.
Max-Access read-only Status current Description License expiry time. History Added in ArubaOS 2.3. sysExtLicenseFlags Syntax DisplayString Max-Access read-only Status current Description License flags E - enabled A - auto-generated R - reboot required to activate History Added in ArubaOS 2.3. sysExtLicenseService Syntax DisplayString Max-Access read-only Status current Description The service enabled by this license. History Added in ArubaOS 2.3.
wlsxSysExtStorageEntry Syntax wlsxSysExtStorageEntry Max-Access not-accessible Status current Description An entry for one long-term storage device contained by the controller. Index { sysExtStorageIndex } sysExtStorageIndex Syntax Integer32 Max-Access not-accessible Status current Description Index of the table. sysExtStorageType Syntax Integer ram(1) flashMemory(2) Max-Access read-only Status current Description Type of the storage.
sysExtStorageName Syntax DisplayString(Size(0..64)) Max-Access read-only Status current Description Name of the storage file system. wlsxSysExtMemoryTable The objects of the wlsx System External Memory table contain the memory status of the controller. Table 89 wlsxSysExtMemoryTable OIDs Object Object ID wlsxSysExtMemoryEntry 1.3.6.1.4.1.14823.2.2.1.2.1.15.1 wlsxSysExtMemoryTable 1 sysExtMemoryIndex 1.3.6.1.4.1.14823.2.2.1.2.1.15.1.1 wlsxSysExtMemoryEntry 1 sysExtMemorySize 1.3.6.1.4.1.
wlsxSysExtMemoryEntry Syntax wlsxSysExtMemoryEntry Max-Access not-accessible Status current Description An entry for one memory region on the controller. Currently, only the CP region is monitored. Index { sysExtMemoryIndex } sysExtMemoryIndex Syntax Integer32 Max-Access not-accessible Status current Description Index of the table. sysExtMemorySize Syntax Integer32 Max-Access read-only Status current Description Total memory in KB.
The objects of the wlsx System External Table Generated Number group list the number of modifications that occurred since the last reboot. Table 90 wlsxSystemExtTableGenNumberGroup OIDs Object Object ID wlsxSysExtUserTableGenNumber 1.3.6.1.4.1.14823.2.2.1.2.2.1 wlsxSystemExtTableGenNumberGroup 1 wlsxSysExtAPBssidTableGenNumber 1.3.6.1.4.1.14823.2.2.1.2.2.2 wlsxSystemExtTableGenNumberGroup 2 wlsxSysExtAPRadioTableGenNumber 1.3.6.1.4.1.14823.2.2.1.2.2.
wlsxSysExtUserTableGenNumber Syntax Integer32 Max-Access read-only Status current Description This object denotes the number of times the user table was modified since reboot. History Added in version 3.1 wlsxSysExtAPBssidTableGenNumber Syntax Integer32 Max-Access read-only Status current Description This object denotes the number of times the AP BSSID table was modified since reboot. History Added in version 3.
Status current Description This object denotes the number of times the switch list table was modified since reboot. History Added in version 3.1. 322 | System External Dell PowerConnect ArubaOS 5.
wlsxSysExtPortTableGenNumber Syntax Integer32 Max-Access read-only Status current Description This object denotes the number of times the port table was modified since reboot. History Added in version 3.1. wlsxSysExtVlanTableGenNumber Syntax Integer32 Max-Access read-only Status current Description This object denotes the number of times the VLAN table was modified since reboot. History Added in version 3.1.
Status current Description This object denotes the number of times the monitored AP table was modified since reboot. History Added in version 3.1. wlsxSysExtMonStationTableGenNumber Syntax Integer32 Max-Access read-only Status current Description This object denotes the number of times the monitored station table was modified since reboot. History Added in version 3.1 324 | System External Dell PowerConnect ArubaOS 5.
Chapter 13 Textual Conventions This chapter provides information about the Textual Conventions, which define the data structures of Dell object types. Textual Conventions are found in the file aruba-tc.my. For information about downloading Dell MIB files, see “Downloading MIB Files” on page 23. Note: Textual Conventions do not have OIDs. Following is a list of the Textual Conventions, which are described below.
ArubaEnableValue Syntax Integer enable(1) disable(2) Status current Description Represents a flag which is either enabled or disabled. ArubaFrameType Syntax Integer associateRequest(0) associateResponse(1) reassociateRequest(2) reassociateResponse(3) probeRequest(4) probeResponse(5) beacon(8) atim(9) disassociate(10) auth(11) deauth(12) Status current Description Represents the frame type. History Updated in ArubaOS 3.
Description Represents the HT status of the access point or client. History Added in ArubaOS 3.3.0.0. Dell PowerConnect ArubaOS 5.
ArubaHTExtChannel Syntax Integer none(1) above(2) below(3) } Description Represents the extension channel offset relative to the current channel. Status current History Added in ArubaOS 3.3.0.0. ArubaSwitchRole Syntax Integer master(1) local(2) backupmaster(3) Status current Description Represents the role of the controller. ArubaSupportStatus Syntax Integer unsupported(1) supported(2) Status current Description Represents if a feature is supported or unsupported.
Description Represents both the source and destination to which an ACL rule will be applied. Dell PowerConnect ArubaOS 5.
ArubaACLNetworkServiceType Syntax Integer alias(1) any(2) tcp(3) udp(4) protocol(5) Status current Description Represents the network service in an ACL Rule. ArubaACLAction Syntax Integer deny(1) permit(2) srcNAT(3) dstNAT(4) redirect(5) Status current Description Represents the actions in an ACL rule. ArubaDaysOfWeek Syntax Integer sun(1) mon(2) tue(3) wed(4) thu(5) fri(6) sat(7) Status current Description Represents the actions of an ACL rule.
ArubaAuthenticationMethods Syntax Integer none(0) web(1) mac(2) vpn(3) dot1x(4) kerberos(5) secureId(7) pubcookie(15) xSec(16) xSecMachine(17) other(255) Status current Description Authentication method. ArubaSubAuthenticationMethods Syntax Integer authPAP(1) authCHAP(2) authMSCHAP(3) authMSCHAPv2(4) eapTLS(5) eapTTLS(6) eapLEAP(7) eapMD5(8) Status current Description Sub-authentication (e.g., EAP type).
ArubaStationType Syntax Integer valid(1) interfering(2) dos(3) Status current Description Represents the station type. ArubaEncryptionMethods Syntax Bits disabled(0) static-wep(1) dynamic-wep(2) static-wpa(3) dynamic-wpa(4) wpa2-psk-aes(5) wpa2-8021x-aes(6) wpa2PreAuth(7) xsec(8) wpa-psk-aes(9) wpa-aes(10) wpa2-psk-tkip(11) wpa2-8021x-tkip(12) Status current Description Represents the actions in an ACL rule. History Updated in ArubaOS 3.
ArubaPortMode Syntax Integer access(1) dot1q(2)} Status current Description Represents the switch port mode. ArubaDot1dState Syntax Integer disabled(1), blocked(2), listening(3), learning(4), forwarding(5) Status current Description Represents the switch port mode. History Updated in ArubaOS 3.1—syntax, addition of items (2)–(5) ArubaPoeState Syntax Integer disabled(1) enabled(2) enabledCisco(3) Status current Description Represents the switch port mode.
History 334 | Textual Conventions Updated in ArubaOS 3.1—syntax, addition of items (8)–(11) Dell PowerConnect ArubaOS 5.
ArubaESIServerMode Syntax Integer bridged(1) routed(2) nat(3) Status current Description The mode of the ESI server. History Updated in ArubaOS 3.1—addition of nat(3) ArubaESIServerStatus Syntax Integer up(1) down(2) Status current Description The status of the ESI server. ArubaIfType Syntax Integer port(1) VLAN(2) tunnel(3) loopback(4) Status current Description The type interface referred to by the value of ifIndex.
ArubaAccessPointMode Syntax Integer airMonitor(1), accessPoint(2), accessPointAndMonitor(3) meshPortal(4) meshPoint(5) Status current Description The mode of the access point. History Update in ArubaOS 3.2.0.0.—addition of items (4) and (5) in Syntax. ArubaAuthServerType Syntax Integer internaldb(1) radius(2) ldap(3) kerberos(4) tacacs(5) Status current Description The mode of the access point.
ArubaDBType Syntax Integer mssql(1) mysql(2) Status current Description Database type. ArubaVrrpState Syntax Integer initialize(1) backup(2) master(3) Status current Description Database type. ArubaOperStateValue Syntax Integer up(1) down(2) testing(3) Syntax current Description Represents operational state of an interface. ArubaAntennaSetting Syntax Integer notPresent(1) enabled(2) disabled(3) Syntax current Description Represents the status of the external antenna.
ArubaPortSpeed Syntax Integer speed10Mbps(1) speed100Mbps(2) speed1000Mbps(3) speedAuto(4) speed10Gbps(5) Status current Description Port speed. History Update in ArubaOS 3.2.0.0.—addition of item (5) in Syntax. ArubaPortDuplex Syntax Integer half(1) full(2) auto(3) Status current Description Port duplexity. ArubaPortType Syntax Integer fastethernet(1) gigabitethernet(2) xgigabitethernet(3) Status current Description Port type. History Update in ArubaOS 3.2.0.0.
ArubaUnprovisionedStatus Syntax Integer yes(1) no(2) Status current Description Represents whether the AP is provisioned or not. ArubaMonitorMode Syntax Integer Status current Description Represents whether the AP has any radios dedicated to monitoring. ArubaConfigurationState Syntax Integer success(1), error(2) Status current Description Configuration transfer types. History Added in ArubaOS 3.
ArubaCallStates Syntax Integer idle(0) initiated(1) connecting(2) delivered(3) connected(4) offered(5) alerting(6) releasing(7) cancelling(8) transient(9) dummy503(10) succ(11), fail(12) aborted(13) blocked(14) Status current Description The call state. History Added in ArubaOS 3.1 ArubaVoipProtocol Syntax Integer sccp(1) svp(2) vocera(3) sip(9) ua(11) Status current Description VoIP protocol used. History Added in ArubaOS 3.
ArubaVoiceCdrDirection Syntax Integer og(0) ic(1) Status current Description VoIP CDR direction. History Added in ArubaOS 3.1 ArubaVoiceCacBit Syntax Bits cacActiveLoadBalancing(0) cacHighCapThresholdReached(1) cacHandRsrvThresholdReached(2) cacPeakCapacityReached(3) Status current Description Voice CAC bit flags. History Added in ArubaOS 3.1 ArubaMeshRole Syntax Integer nonmesh(0) point(1) portal(2) Status current Description Mesh role. History Added in ArubaOS 3.2.0.0.
ArubaHTRate Syntax Integer unknown(0) ht6dot5(1) ht13(2) ht13dot5(3) ht15(4) ht19dot5(5) ht26(6) ht27(7) ht30(8) ht39(9) ht40dot5(10) ht45(11) ht52(12) ht54(13) ht58dot5(14) ht60(15) ht65(16) ht78(17) ht81(18) ht90(19) ht104(20) ht108(21) ht117(22) ht120(23) ht121dot5(24) ht130(25) ht135(26) ht150(27) ht162(28) ht180(29) ht216(30) ht240(31) ht243(32) ht270(33) ht300(34) Status current Description Represents HT rate. History Added in ArubaOS 3.2.0.0.
Chapter 14 Traps This module defines the Traps that can be generated by the controller. Traps are MIB objects (variables) that transmit information to the SNMP Manager when an event occurs. Traps are included as varbinds (variable bindings) in the trap protocol data unit (PDU). Varbinds are defined in the Description section below. Figure 15 shows the architecture of the Traps MIB relative to 1.3.6.1.4.1.14823 (iso.org.dod.internet.private.enterprise.aruba). The Traps are listed in the file aruba-trap.
wlsx Trap Objects Group Table 91 wlsxTraps Object Group OIDs 344 | Traps Object Object ID wlsxTrapAPMacAddress 1.3.6.1.4.1.14823.2.3.1.11.1.1.1 wlsxTrapObjectsGroup 1 wlsxTrapAPIpAddress 1.3.6.1.4.1.14823.2.3.1.11.1.1.2 wlsxTrapObjectsGroup 2 wlsxTrapAPBSSID 1.3.6.1.4.1.14823.2.3.1.11.1.1.3 wlsxTrapObjectsGroup 3 wlsxTrapEssid 1.3.6.1.4.1.14823.2.3.1.11.1.1.4 wlsxTrapObjectsGroup 4 wlsxTrapTargetAPBSSID 1.3.6.1.4.1.14823.2.3.1.11.1.1.5 wlsxTrapObjectsGroup 5 wlsxTrapTargetAPSSID 1.3.6.1.
Table 91 wlsxTraps Object Group OIDs (Continued) Object Object ID wlsxTrapStationBlackListReason 1.3.6.1.4.1.14823.2.3.1.11.1.1.34 wlsxTrapObjectsGroup 34 wlsxTrapSpoofedIpAddress 1.3.6.1.4.1.14823.2.3.1.11.1.1.35 wlsxTrapObjectsGroup 35 wlsxTrapSpoofedOldPhyAddress 1.3.6.1.4.1.14823.2.3.1.11.1.1.36 wlsxTrapObjectsGroup 36 wlsxTrapSpoofedNewPhyAddress 1.3.6.1.4.1.14823.2.3.1.11.1.1.37 wlsxTrapObjectsGroup 37 wlsxTrapDBName 1.3.6.1.4.1.14823.2.3.1.11.1.1.
Table 91 wlsxTraps Object Group OIDs (Continued) 346 | Traps Object Object ID wlsxTrapUpdateFailedObj 1.3.6.1.4.1.14823.2.3.1.11.1.1.68 wlsxTrapObjectsGroup 68 wlsxTrapTableEntryChangeType 1.3.6.1.4.1.14823.2.3.1.11.1.1.69 wlsxTrapObjectsGroup 69 wlsxTrapGlobalConfigObj 1.3.6.1.4.1.14823.2.3.1.11.1.1.70 wlsxTrapObjectsGroup 70 wlsxTrapTableGenNumber 1.3.6.1.4.1.14823.2.3.1.11.1.1.71 wlsxTrapObjectsGroup 71 wlsxTrapLicenseId 1.3.6.1.4.1.14823.2.3.1.11.1.1.
wlsxTrapAPMacAddress Syntax MacAddress Max-Access accessible-for-notify Status current Description This object is used in the trap to indicate the wired MAC address of an access point. wlsxTrapAPIpAddress Syntax IpAddress Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the IP address of an access point for which we are raising the trap.
wlsxTrapTargetAPSSID Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the SSID of the access point for which we are raising the trap. If an air monitor is sending the trap, this will indicate AP. If an access point is sending the trap, then it will point to itself.
wlsxTrapTransmitterMac Syntax MacAddress Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the MAC address of the transmitter. wlsxTrapReceiverMac Syntax MacAddress Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the MAC address of the transmitter.
| Traps Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the address type. Dell PowerConnect ArubaOS 5.
wlsxTrapAPLocation Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the location of the AP. wlsxTrapAPChannel Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the current channel.
| Traps Max-Access accessible-for-notify Status current Description This object is used to point to the WEBUI Rogue AP information URL. Dell PowerConnect ArubaOS 5.
wlsxTrapVLANId Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the VLAN ID. wlsxTrapAdminStatus Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the admin status of VLAN.
| Traps Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the slot in which this card is present. Dell PowerConnect ArubaOS 5.
wlsxTrapTemperatureValue Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the temperature value. wlsxTrapProcessName Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the process name.
| Traps Max-Access accessible-for-notify Status current Description The reason for which a station is black listed. Dell PowerConnect ArubaOS 5.
wlsxTrapSpoofedIpAddress Syntax IpAddress Max-Access accessible-for-notify Status current Description This object is used in a trap to identify a spoofed IP address. wlsxTrapSpoofedOldPhyAddress Syntax MacAddress Max-Access accessible-for-notify Status current Description This object is used in a trap to identify an old MAC address.
| Traps Max-Access accessible-for-notify Status current Description This object is used in a trap to identify the IP address of the database. Dell PowerConnect ArubaOS 5.
wlsxTrapDBType Syntax ArubaDBType Max-Access accessible-for-notify Status current Description This object is used in a trap to identify the port of the user. wlsxTrapVrrpID Syntax Integer32 Max-Access accessible-for-notify Status current Description This object contains the virtual router identifier. wlsxTrapVrrpMasterIp Syntax IpAddress Max-Access accessible-for-notify Status current Description This object contains the master IP address.
| Traps Max-Access accessible-for-notify Status current Description This object represents the External Services Interface (ESI) server name. Dell PowerConnect ArubaOS 5.
wlsxTrapESIServerIpAddress Syntax IpAddress Max-Access accessible-for-notify Status current Description This object represents the External Services Interface (ESI) server IP address. wlsxTrapLicenseDaysRemaining Syntax Integer32 Max-Access accessible-for-notify Status current Description This object represents the number of days remaining prior to a license expiry.
| Traps Max-Access accessible-for-notify Status current Description This object represents the MAC address of the user. Dell PowerConnect ArubaOS 5.
wlsxTrapUserName Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the user name. wlsxTrapUserRole Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the authentication method of the user.
| Traps Max-Access accessible-for-notify Status current Description This object is used to point to the WEBGUI Rogue interfering access point information URL. Dell PowerConnect ArubaOS 5.
wlsxTrapPortNumber Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the port number. wlsxTrapTime Syntax DateAndTime Max-Access accessible-for-notify Status current Description This object is used in all the enterprise traps to indicate the time when the trap is generated on the controller.
wlsxTrapCTSURL Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the URL from which the transfer should happen. History Added in ArubaOS 3.1.0.0. wlsxTrapCTSTransferType Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the transfer type, upload or download. History Added in ArubaOS 3.1.0.0.
Status current Description This variable represents the AMAPI object which is the reason for the update failure. History Added in ArubaOS 3.1.0.0. Dell PowerConnect ArubaOS 5.
wlsxTrapTableEntryChangeType Syntax ArubaConfigurationChangeType Max-Access accessible-for-notify Status current Description This object represents the type of the configuration change. History Added in ArubaOS 3.1.0.0. wlsxTrapGlobalConfigObj Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This variable represents the AMAPI object corresponding to the global configuration change. History Added in ArubaOS 3.1.0.0.
Status current Description This object is used in the traps to indicate the confidence level as a percentage. History Added in ArubaOS 3.1.0.0. Dell PowerConnect ArubaOS 5.
wlsxTrapMissingLicenses Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This variable indicates any licenses that are not present during a configuration update. History Added in ArubaOS 3.1.0.0. wlsxVoiceCurrentNumCdr Syntax Integer32 Max-Access accessible-for-notify Status current Description This object represents the number of CDRs in buffer. History Added in ArubaOS 3.1.0.0.
Status current Description This object represents the tunnel up reason. History Added in ArubaOS 3.1.0.0. Dell PowerConnect ArubaOS 5.
wlsxTrapTunnelDownReason Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the tunnel down reason. History Added in ArubaOS 3.1.0.0. wlsxTrapApSerialNumber Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the AP serial number. History Added in ArubaOS 3.4. wlsxTraptimeStr Syntax DisplayString(Size(0..
Status current Description This object represents the local IP address. History Added in ArubaOS 3.4.1 wlsxTrapMasterName Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the master controller name. History Added in ArubaOS 3.4.1 Dell PowerConnect ArubaOS 5.
wlsxTrapLocalName Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the local controller name. History Added in ArubaOS 3.4.1 wlsxTrapPrimaryControllerIp Syntax IpAddress Max-Access accessible-for-notify Status current Description This object represents the IP address of the AP's primary controller. History Added in ArubaOS 3.4.
Table 92 wlsx Trap Definitions Group OIDs (Continued) Object Object ID wlsxFanOK 1.3.6.1.4.1.14823.2.3.1.11.1.2.1009 wlsxTrapDefinitionsGroup 1009 wlsxInRangeVoltage 1.3.6.1.4.1.14823.2.3.1.11.1.2.1010 wlsxTrapDefinitionsGroup 1010 wlsxCoverageHoleResolved 1.3.6.1.4.1.14823.2.3.1.11.1.2.1011 wlsxTrapDefinitionsGroup 1011 wlsxNSwitchIPChanged 1.3.6.1.4.1.14823.2.3.1.11.1.2.1012 wlsxTrapDefinitionsGroup 1012 wlsxNSwitchRoleChange 1.3.6.1.4.1.14823.2.3.1.11.1.2.
Table 92 wlsx Trap Definitions Group OIDs (Continued) 376 | Traps Object Object ID wlsxNChannelChanged 1.3.6.1.4.1.14823.2.3.1.11.1.2.1043 wlsxTrapDefinitionsGroup 1043 wlsxNStationAddedToBlackList 1.3.6.1.4.1.14823.2.3.1.11.1.2.1044 wlsxTrapDefinitionsGroup 1044 wlsxNStationRemovedFromBlackList 1.3.6.1.4.1.14823.2.3.1.11.1.2.1045 wlsxTrapDefinitionsGroup 1045 wlsxNIpSpoofingDetected 1.3.6.1.4.1.14823.2.3.1.11.1.2.1046 wlsxTrapDefinitionsGroup 1046 wlsxNDBCommunicationFailure 1.3.6.1.4.1.
Table 92 wlsx Trap Definitions Group OIDs (Continued) Object Object ID wlsxFrameBandWidthRateExceeded 1.3.6.1.4.1.14823.2.3.1.11.1.2.1077 wlsxTrapDefinitionsGroup 1077 wlsxFrameLowSpeedRateExceeded 1.3.6.1.4.1.14823.2.3.1.11.1.2.1078 wlsxTrapDefinitionsGroup 1078 wlsxFrameNonUnicastRateExceeded 1.3.6.1.4.1.14823.2.3.1.11.1.2.1079 wlsxTrapDefinitionsGroup 1079 wlsxLoadbalancingEnabled 1.3.6.1.4.1.14823.2.3.1.11.1.2.1080 wlsxTrapDefinitionsGroup 1080 wlsxLoadbalancingDisabled 1.3.6.1.4.1.14823.
Table 92 wlsx Trap Definitions Group OIDs (Continued) 378 | Traps Object Object ID wlsxColdStart 1.3.6.1.4.1.14823.2.3.1.11.1.2.1111 wlsxTrapDefinitionsGroup 1111 wlsxWarmStart 1.3.6.1.4.1.14823.2.3.1.11.1.2.1112 wlsxTrapDefinitionsGroup 1112 wlsxAPImpersonation 1.3.6.1.4.1.14823.2.3.1.11.1.2.1113 wlsxTrapDefinitionsGroup 1113 wlsxInformQueueOverFlow 1.3.6.1.4.1.14823.2.3.1.11.1.2.1114 wlsxTrapDefinitionsGroup 1114 wlsxNAuthServerIsDown 1.3.6.1.4.1.14823.2.3.1.11.1.2.
Table 92 wlsx Trap Definitions Group OIDs (Continued) Object Object ID wlsxWindowsBridgeDetectedSta 1.3.6.1.4.1.14823.2.3.1.11.1.2.1145 wlsxTrapDefinitionsGroup 1145 wlsxAdhocNetworkBridgeDetectedAP 1.3.6.1.4.1.14823.2.3.1.11.1.2.1146 wlsxTrapDefinitionsGroup 1146 wlsxAdhocNetworkBridgeDetectedSta 1.3.6.1.4.1.14823.2.3.1.11.1.2.1147 wlsxTrapDefinitionsGroup 1147 wlsxDisconnectStationAttackAP 1.3.6.1.4.1.14823.2.3.1.11.1.2.1148 wlsxTrapDefinitionsGroup 1148 wlsxDisconnectStationAttackSta 1.3.
wlsxVLANLinkUp Objects { wlsxTrapVLANId, wlsxTrapAdminStatus, wlsxTrapOperStatus } Status current Description This trap indicates that a VLAN interface is up. wlsxVLANLinkDown Objects { wlsxTrapVLANId, wlsxTrapAdminStatus, wlsxTrapOperStatus } Status current Description This trap indicates that a VLAN interface is down.
wlsxNormalTemperature Objects { wlsxTrapTemperatureValue } Status current Description This trap indicates that the temperature has returned to an acceptable range. wlsxProcessRestart Objects { wlsxTrapProcessName } Status current Description This trap indicates that the named process has been restarted. wlsxFlashSpaceOK Status current Description This trap indicates that the system flash space is back to a sufficient level.
wlsxCoverageHoleResolved Objects { wlsxTrapAPBSSID, wlsxTrapAPLocation, wlsxTrapNodeMac } Status current Description This trap indicates that a coverage hole at location wlsxTrapAPLocation has been resolved. History Updated in ArubaOS 3.1—description. wlsxNSwitchIPChanged Objects { wlsxTrapSwitchIp } Status current Description This trap indicates that the controller IP address has changed.
History Added in ArubaOS 3.1.0.0. Dell PowerConnect ArubaOS 5.
wlsxNUserEntryDeAuthenticated Objects { wlsxTrapUserIpAddress, wlsxTrapUserPhyAddress } Status current Description This trap indicates that a user is deauthenticated. History Added in ArubaOS 3.1.0.0. wlsxNUserAuthenticationFailed Objects { wlsxTrapUserIpAddress, wlsxTrapUserPhyAddress } Status current Description This trap indicates that a user authentication has failed. History Added in ArubaOS 3.1.0.0.
Description This trap indicates that the user entries table is full and cannot add any more entries. History Added in ArubaOS 3.1.0.0. Dell PowerConnect ArubaOS 5.
wlsxNAuthMaxAclEntries Status current Description This trap indicates the ACL entries table is full and cannot add any more entries. History Added in ArubaOS 3.1.0.0. wlsxNAuthMaxBWContracts Status current Description This trap indicates the controller reached the maximum number of configurable bandwidth contracts. History Added in ArubaOS 3.1.0.0. wlsxNPowerSupplyFailure Status current Description This trap indicates the power supply has failed. History Added in ArubaOS 3.1.0.0.
History Added in ArubaOS 3.1.0.0. Dell PowerConnect ArubaOS 5.
wlsxNLCInserted Objects { wlsxTrapCardSlot } Status current Description This trap indicates that a line card is inserted. History Added in ArubaOS 3.1.0.0. wlsxNSCInserted Objects { wlsxTrapCardSlot } Status current Description This trap indicates that a supervisor card is inserted. History Added in ArubaOS 3.1.0.0. wlsxNGBICInserted Status current Description This trap indicates that a GBIC is inserted in a line card. History Added in ArubaOS 3.1.0.0.
Description This trap indicates that the controller is running low on flash space. History Added in ArubaOS 3.1.0.0. Dell PowerConnect ArubaOS 5.
wlsxNLowMemory Status current Description This trap indicates that the system free memory is low. The system memory threshold is 5 MB. History Added in ArubaOS 3.1.0.0. wlsxNFanTrayRemoved Status current Description This trap indicates that a fan tray is removed. History Added in ArubaOS 3.1.0.0. wlsxNFanTrayInserted Status current Description This trap indicates that a fan tray is inserted. History Added in ArubaOS 3.1.0.0.
wlsxNAccessPointIsDown Objects { wlsxTrapAPMacAddress } Status current Description This trap indicates that an access point is down. History Added in ArubaOS 3.1.0.0. wlsxNCoverageHoleDetected Objects { wlsxTrapAPBSSID, wlsxTrapAPLocation, wlsxTrapNodeMac } Status current Description This trap indicates that an access point at location wlsxTrapAPLocation has detected a coverage hole. History Added in ArubaOS 3.1.0.0.
wlsxNIpSpoofingDetected Objects { wlsxTrapSpoofedIpAddress, wlsxTrapSpoofedOldPhyAddress, wlsxTrapSpoofedNewPhyAddress } Status current Description A trap indicating that the controller detected IP spoofing. History Added in ArubaOS 3.1.0.0. wlsxNDBCommunicationFailure Objects { wlsxTrapDBName, wlsxTrapDBUserName, wlsxTrapDBIpAddress, wlsxTrapDBType } Status current Description This trap indicates that communication with the database failed. History Added in ArubaOS 3.1.0.0.
wlsxNLicenseExpiry Objects { wlsxTrapLicenseDaysRemaining } Status current Description This trap indicates that one or more licenses on the controller will expire in wlsxTrapLicenseDaysRemaining days.
| Traps Status current Description This trap indicates that an air monitor detected an access point violating valid SSID configuration. Dell PowerConnect ArubaOS 5.
wlsxChannelMisconfiguration Objects { wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an air monitor detected an access point that has a bad channel configuration.
Description 396 | Traps This trap indicates that an air monitor has detected an ad hoc network. Dell PowerConnect ArubaOS 5.
wlsxAdhocNetworkRemoved Objects { wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that a previously detected ad hoc network is no longer present in the network.
wlsxAPInterferenceDetected Objects { wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an air monitor has detected an AP interference on a channel.
Description This trap indicates that an air monitor is reporting that an AP has exceeded an upper threshold for frame receive error rate for AP. Dell PowerConnect ArubaOS 5.
wlsxFrameFragmentationRateExceeded Objects { wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapTargetAPChannel, wlsxTrapAPLocation } Status current Description This trap indicates that an air monitor is reporting that an AP has exceeded an upper threshold for frame fragmentation rate for AP.
wlsxLoadbalancingDisabled Objects { wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an air monitor is reporting that an AP has enabled load balancing.
Description 402 | Traps This trap indicates that we detected a signature match from a station. Dell PowerConnect ArubaOS 5.
wlsxChannelRateAnomaly Objects { wlsxTrapFrameType, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an air monitor detected frames on a channel which exceed the configured IDS rate threshold.
| Traps Status current Description This trap indicates that an air monitor received packets from an AP which exceeds the acceptable sequence number difference. The acceptable sequence number difference is an IDS configuration object. Dell PowerConnect ArubaOS 5.
wlsxSequenceNumberAnomalySta Objects { wlsxTrapSourceMac, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation } Status current Description This trap indicates that an air monitor received packets from a node which exceeds the acceptable sequence number difference. The acceptable sequence number difference is an IDS Configuration object.
| Traps Status current Description This trap indicates that an air monitor detected an invalid MAC OUI in transmission from an AP. Dell PowerConnect ArubaOS 5.
wlsxInvalidMacOUISta Objects { wlsxTrapAddressType, wlsxTrapNodeMac, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation } Status current Description This trap indicates that an air monitor detected an invalid MAC OUI in transmission from a station.
| Traps Status current Description This trap indicates that a previously detected unsecure AP association is no longer present. Dell PowerConnect ArubaOS 5.
wlsxAdhocNetworkBridgeDetected Objects { wlsxTrapSourceMac, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an air monitor has detected an ad hoc network that is bridging to a wired network.
Description 410 | Traps This trap indicates that an access point is down. Dell PowerConnect ArubaOS 5.
wlsxColdStart Status current Description An enterprise version of cold start trap, which contains the controller time stamp. wlsxWarmStart Status current wlsxAPImpersonation Objects { wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an air monitor detected station impersonation.
| Traps Description This trap indicates the status of the configuration transfer from the management station. History Added in ArubaOS 3.1.0.0. Dell PowerConnect ArubaOS 5.
wlsxConfigurationUpdateError Objects { wlsxTrapTime, wlsxTrapConfigurationId, wlsxTrapUpdateFailureReason, wlsxTrapUpdateFailedObj } Status current Description This trap indicates the configuration update status. History Added in ArubaOS 3.1.0.0. wlsxConfigurationUpdateSucceeded Objects { wlsxTrapTime, wlsxTrapConfigurationId } Status current Description This trap indicates the configuration update status. History Added in ArubaOS 3.1.0.0.
wlsxAPRadioEntryChanged Objects { wlsxTrapTime, wlsxTrapTableGenNumber, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapTableEntryChangeType } Status current Description This trap indicates that the radio configuration has changed. History Added in ArubaOS 3.1.0.0. wlsxAPEntryChanged Objects { wlsxTrapTime, wlsxTrapTableGenNumber, wlsxTrapAPMacAddress, wlsxTrapTableEntryChangeType } Status current Description This trap indicates that the AP configuration has changed.
wlsxVlanInterfaceEntryChanged Objects { wlsxTrapTime, wlsxTrapTableGenNumber, wlsxTrapVlanId, wlsxTrapTableEntryChangeType } Status current Description This trap indicates that the VLAN Interface configuration has changed. History Added in ArubaOS 3.1.0.0.
wlsxMonStationEntryChanged Objects { wlsxTrapTime, wlsxTrapTableGenNumber, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapNodeMac, wlsxTrapTableEntryChangeType } Status current Description This trap indicates that a monitored station entry changed. History Added in ArubaOS 3.1.0.0.
Status current Description This trap indicates that the system detected a signature match for ASLEAP from a station. For more information refer to: http://www.wve.org/entries/show/WVE-2005-0027 History Added in ArubaOS 3.1.0.0. Dell PowerConnect ArubaOS 5.
wlsxSignAPAirjack Objects { wlsxTrapTime, wlsxTrapSignatureName, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation } Status current Description This trap indicates that the system detected a signature match for AirJack from an AP. For more information refer to: http://www.wve.org/entries/show/WVE-2005-0018 History Added in ArubaOS 3.1.0.0.
wlsxSignAPDeauthBcast Objects { wlsxTrapTime, wlsxTrapSignatureName, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation } Status current Description This trap indicates that the system detected a signature match for Deauth-Broadcast from an AP. For more information refer to: http://www.wve.org/entries/show/WVE-2005-0019 http://www.wve.org/entries/show/WVE-2005-0045 History Added in ArubaOS 3.1.0.0.
wlsxAdhocNetworkBridgeDetectedAP Objects { wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an air monitor has detected an ad hoc network that is bridging to a wired network. History Added in ArubaOS 3.1.0.0.
wlsxSuspectUnsecureAPDetected Objects { wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPRadioNumber, wlsxTrapMatchedMac, wlsxTrapMatchedIp, wlsxTrapConfidenceLevel, wlsxTrapAPLocation, wlsxTrapRogueInfoURL } Status current Description This trap indicates that a suspected unsecure access point is detected by a controller. The access point is suspected to be unsecure with the supplied confidence level, because it was matched to the wired MAC address or IP address.
History 422 | Traps Added in ArubaOS 3.1.0.0. Dell PowerConnect ArubaOS 5.
wlsxTunnelDown Objects { wlsxTrapTime, wlsxTrapTunnelId, wlsxTrapTunnelDownReason, wlsxTrapTunnelStatus } Status current Description This trap indicates that a tunnel interface is down. History Added in ArubaOS 3.1.0.0. wlsxMeshNodeEntryChanged Objects { wlsxTrapTime, wlsxTrapTableGenNumber,wlsxTrapAPMacAddress, wlsxTrapTableEntryChangeType } Status current Description This trap indicates that the mesh node configuration has changed. History Added in ArubaOS 3.2.0.0.
wlsxNAuthServerAllInService Objects { wlsxTrapTime, wlsxTrapESIServerGrpName } Status current Description This trap indicates that all authentication servers in a server group are brought back in service History Added in ArubaOS 3.4.
Description A trap which indicates that the xSec user limit is reached. History Added in ArubaOS 3.4.1 Dell PowerConnect ArubaOS 5.
wlsxNVpnMaxSessions Objects { wlsxTrapTime } Status current Description A trap which indicates that the VPN session limit is reached. History Added in ArubaOS 3.4.1 wlsxNRapExpiredPSK Objects { wlsxTrapTime, wlsxTrapAPIpAddress, wlsxTrapApSerialNumber } Status current Description A trap which indicates that the RAP is using the Expired PSK. History Added in ArubaOS 3.4.
Chapter 15 User The User module provides information about the user, the party connected to the controller. Information includes the total number of users, name and access-level of the user, the physical location of the user’s station, and so on. User MIBs support IPv4. For IPv6 support, see Chapter 16 on page 447. Figure 16 shows the architecture of the User MIB relative to 1.3.6.1.4.1.14823 (iso.org.dod.internet.private.enterprise.aruba). The User MIBs are listed in the file aruba-user.my.
Table 93 User MIB Tables (Continued) Table Description wlsxUserTable This table lists all the users (both wired and wireless) currently connected to the controller. Users are identified by their MAC address and IP address. wlsxUserSessionTimeTable This table lists the user session time counts on an ESSID. The session times are sorted by time length (duration). wlsxUserStatsGroup This table lists the user count information based on the authentication type.
Table 94 wlsxUserTable OIDs (Continued) Object Object ID nUserDefaultVLAN 1.3.6.1.4.1.14823.2.4.1.2.1.16 wlsxUserEntry 16 nUserAssignedVLAN 1.3.6.1.4.1.14823.2.4.1.2.1.17 wlsxUserEntry 17 nUserBWContractName 1.3.6.1.4.1.14823.2.4.1.2.1.18 wlsxUserEntry 18 nUserBWContractUsage 1.3.6.1.4.1.14823.2.4.1.2.1.19 wlsxUserEntry 19 nUserBWContractId 1.3.6.1.4.1.14823.2.4.1.2.1.20 wlsxUserEntry 20 nUserIsProxyArpEnabled 1.3.6.1.4.1.14823.2.4.1.2.1.21 wlsxUserEntry 21 nUserCurrentVLAN 1.3.6.1.4.1.
wlsxUserEntry Syntax wlsxUserEntry Max-Access not-accessible Status current Description User entry Index { nUserPhyAddress, nUserIpAddress } History Added in ArubaOS 2.3. nUserPhyAddress Syntax MacAddress Max-Access not-accessible Status current Description Physical address of the station from which the user connected to the controller. History Added in ArubaOS 2.3.
nUserName Syntax DisplayString(SIZE(0..128)) Max-Access read-only Status current Description Name of the user. History Added in ArubaOS 2.3. nUserRole Syntax DisplayString(SIZE(0..64)) Max-Access read-only Status current Description The role configured for this user. History Added in ArubaOS 2.3. nUserUpTime Syntax TimeTicks Max-Access read-only Status current Description Time since the user connected to the controller. History Added in ArubaOS 2.3.
| User Status current Description Sub-authentication method History Added in ArubaOS 2.3. Dell PowerConnect ArubaOS 5.
nUserAuthServerName Syntax DisplayString(SIZE(0..32)) Max-Access read-only Status current Description Name of the authentication server used to authenticate the user. History Added in ArubaOS 2.3. Updated in ArubaOS 3.2.0.0.—description nUserExtVPNAddress Syntax IpAddress Max-Access read-only Status current Description External VPN IP address if this is a VPN user, or 0.0.0.0 if not. History Added in ArubaOS 2.3. Updated in ArubaOS 3.2.0.0.—description.
| User Status current Description The object will indicate if the controller is the home controller for the user or not. History Added in ArubaOS 2.3. Dell PowerConnect ArubaOS 5.
nUserHomeAgentIpAddress Syntax IpAddress Max-Access read-only Status current Description The home agent IP address of the user. If this user is already on the home controller, then this IP is the controller IP address. Otherwise, it is the home controller IP address History Added in ArubaOS 2.3. nUserMobilityStatus Syntax Integer visitor(1) away(2) associated(3) wired(4) Max-Access read-only Status current Description The mobility status of the user. History Added in ArubaOS 2.3.
nUserAssignedVLAN Syntax Integer32 Max-Access read-only Status current Description This VLAN will be different from the default VLAN if the user has a derived VLAN configuration. History Added in ArubaOS 2.3. nUserBWContractName Syntax DisplayString(SIZE(0..32)) Max-Access read-only Status deprecated Description Name of the bandwidth contract applied to this user. History Added in ArubaOS 2.3. Deprecated in ArubaOS 3.2.0.0.
nUserIsProxyArpEnabled Syntax TruthValue Max-Access read-only Status current Description Indicates if the controller is proxy ARPing for the user. nUserCurrentVLAN Syntax Integer32 Max-Access read-only Status current Description The VLAN to which the user is currently bound. nUserIsWired Syntax TruthValue Max-Access read-only Status current Description Indicates whether this is a wired or wireless user. History Added in ArubaOS 2.3.
History 438 | User Added in ArubaOS 2.3. Dell PowerConnect ArubaOS 5.
nUserPhyType Syntax ArubaPhyType Max-Access read-only Status current Description The wireless PHY type to which the user is associated or wired. History Added in ArubaOS 3.1 nUserMobilityDomainName Syntax DisplayString(SIZE(0..64)) Max-Access read-only Status current Description The name of the mobility domain to which the mobile user belongs. History Added in ArubaOS 3.1 nUserUPBWContractName Syntax DisplayString(SIZE(0..
| User Max-Access read-only Status current Description Upstream bandwidth contract ID assigned to the user. History Added in ArubaOS 3.2.0.0. Dell PowerConnect ArubaOS 5.
nUserDNBWContractName Syntax DisplayString(SIZE(0..32)) Max-Access read-only Status current Description Name of the downstream bandwidth contract applied to this user. History Added in ArubaOS 3.2.0.0. nUserDNBWContractUsage Syntax Integer user(1) shared(2) Max-Access read-only Status current Description Indicates how the downstream bandwidth contract is used. History Added in ArubaOS 3.2.0.0.
| User Max-Access read-only Status current Description The User mode. History Added in ArubaOS 5.0 Dell PowerConnect ArubaOS 5.
nUserEncryptionMethod Syntax ArubaEncryptionMethod Max-Access read-only Status current Description Provides encryption method information through SNMP. History Added in ArubaOS 3.4 wlsxUserSessionTimeTable The objects of the wlsx User Session Time table list the user session time counts on an ESSID. The sessions are sorted by time length. The sessions that last longer than 240 minutes are sorted in the 240 minute bucket.
wlsxUserSessionTimeCount Syntax Counter32 Max-Access read-only Status current Description Number of users that are connected to the ESSID whose sessions expired in this time interval. History Added in ArubaOS 3.1.0.0. wlsxUserStatsGroup The objects of the wlsx User Stats Group table provide user statistics information based on authentication types. Table 96 wlsxUserStatsGroup OIDs Object Object ID wlsxNumOfUsers8021x 1.3.6.1.4.1.14823.2.2.1.4.1.4.1 wlsxUserStatsGroup 1 wlsxNumOfUsersVPN 1.
wlsxNumOfUsersCP Syntax Unsigned32 Max-Access read-only Status current Description The number of Captive Portal users. History Added in ArubaOS 3.4 wlsxNumOfUsersMAC Syntax Unsigned32 Max-Access read-only Status current Description The number of MAC users. History Added in ArubaOS 3.4 wlsxNumOfUsersStateful8021x Syntax Unsigned32 Max-Access read-only Status current Description The number of stateful 802.1x users. History Added in ArubaOS 3.4 Dell PowerConnect ArubaOS 5.
| User Dell PowerConnect ArubaOS 5.
Chapter 16 User6 The User6 module supports IPv6 users. This module provides information about the users, the party connected to the controller. Information includes the total number of users, name and access-level of the user, the physical location of the user’s station, and so on. For IPv4 support, see Chapter 15 on page 427. Figure 17 shows the architecture of the User6 MIB relative to 1.3.6.1.4.1.14823 (iso.org.dod.internet.private.enterprise.aruba). The User MIBs are listed in the file aruba-user6.my.
Table 97 User6 MIB Tables (Continued) Table Description wlsxUser6Table This table lists all the users (both wired and wireless) currently connected to the controller. Users are identified by their MAC address and IP address. wlsxUser6SessionTimeTable This table lists the user session time counts on an ESSID. The session times are sorted by time length (duration). wlsxUser6AllInfoGroup The wlsx User6 All Information Group contains information about the users in the controller.
Table 98 wlsxUser6AllInfoGroup Objects Object Object ID nUser6MobilityStatus 1.3.6.1.4.1.14823.2.2.1.14.1.2.14 wlsxUser6Entry 14 nUser6HomeVLAN 1.3.6.1.4.1.14823.2.2.1.14.1.2.15 wlsxUser6Entry 15 nUser6DefaultVLAN 1.3.6.1.4.1.14823.2.2.1.14.1.2.16 wlsxUser6Entry 16 nUser6AssignedVLAN 1.3.6.1.4.1.14823.2.2.1.14.1.2.17 wlsxUser6Entry 17 nUser6BWContractName 1.3.6.1.4.1.14823.2.2.1.14.1.2.18 wlsxUser6Entry 18 nUser6BWContractUsage 1.3.6.1.4.1.14823.2.2.1.14.1.2.
wlsxUser6Entry Syntax wlsxUser6Entry Max-Access not-accessible Status current Description User Entry Index { nUser6PhyAddress, nUser6IpAddress } nUser6PhyAddress Syntax MacAddress Max-Access not-accessible Status current Description MAC address of the station from which the user connected to the controller. History Added in ArubaOS 3.3.0.0. nUser6IpAddress Syntax DisplayString(SIZE(0..128)) Max-Access not-accessible Status current Description IPv6 Address of the user.
Status current Description The Role configured for this user. History Added in ArubaOS 3.3.0.0. Dell PowerConnect ArubaOS 5.
nUser6UpTime Syntax TimeTicks Max-Access read-only Status current Description Time since the user connected to the controller. History Added in ArubaOS 3.3.0.0. nUser6AuthenticationMethod Syntax ArubaAuthenticationMethods Max-Access read-only Status current Description Authentication mechanism used by the user to connect to the controller. History Added in ArubaOS 3.3.0.0.
Status current Description External VPN IP Address, if this is a VPN user or 0.0.0.0 if not. History Added in ArubaOS 3.3.0.0. Dell PowerConnect ArubaOS 5.
nUser6ApLocation Syntax DisplayString(SIZE(0..32)) Max-Access read-only Status current Description Location of the access point to which the user is associated. History Added in ArubaOS 3.3.0.0. nUser6ApBSSID Syntax MacAddress Max-Access read-only Status current Description BSSID of the access point that the user used to connect to the controller. History Added in ArubaOS 3.3.0.0.
nUser6MobilityStatus Syntax Integer visitor(1) away(2) associated(3) wired(4) } Max-Access read-only Status current Description The Mobility Status of the User. History Added in ArubaOS 3.3.0.0. nUser6HomeVLAN Syntax Integer32 Max-Access read-only Status current Description Home VLAN of the User. If the user is on the home controller then this VLAN will be same as userDefaultVLAN. History Added in ArubaOS 3.3.0.0. Dell PowerConnect ArubaOS 5.
nUser6DefaultVLAN Syntax Integer32 Max-Access read-only Status current Description Default VLAN of the User based on the AP configuration. History Added in ArubaOS 3.3.0.0. nUser6AssignedVLAN Syntax Integer32 Max-Access read-only Status current Description This VLAN will be different from the Default VLAN if the user has a derived VLAN Configuration. History Added in ArubaOS 3.3.0.0. nUser6BWContractName Syntax DisplayString(SIZE(0..
Max-Access read-only Status deprecated Description Bandwidth Contract Id Assigned to the User History Added in ArubaOS 3.3.0.0. Dell PowerConnect ArubaOS 5.
nUser6IsProxyArpEnabled Syntax TruthValue Max-Access read-only Status current Description This object will indicate if the controller is proxy ARPing for the user. History Added in ArubaOS 3.3.0.0. nUser6CurrentVLAN Syntax Integer32 Max-Access read-only Status current Description The VLAN to which the user is currently bound. History Added in ArubaOS 3.3.0.0.
Status current Description The port to which the user is connected, if wired. History Added in ArubaOS 3.3.0.0. Dell PowerConnect ArubaOS 5.
nUser6PhyType Syntax ArubaPhyType Max-Access read-only Status current Description The wireless PHY type to which the user is associated, or 'wired'. History Added in ArubaOS 3.3.0.0. nUser6MobilityDomainName Syntax DisplayString(SIZE(0..64)) Max-Access read-only Status current Description The name of mobility domain to which the mobile user belongs. History Added in ArubaOS 3.3.0.0. nUser6UPBWContractName Syntax DisplayString(SIZE(0..
Status current Description Upstream Bandwidth Contract Id Assigned to the User History Added in ArubaOS 3.3.0.0. Dell PowerConnect ArubaOS 5.
nUser6DNBWContractName Syntax DisplayString(SIZE(0..32)) Max-Access read-only Status current Description Name of the Downstream Bandwidth Contract applied to this user. History Added in ArubaOS 3.3.0.0. nUser6DNBWContractUsage Syntax Integer user(1) shared(2) Max-Access read-only Status current Description Indicates how the Downstream Bandwidth Contract is used. History Added in ArubaOS 3.3.0.0.
240min bucket. Table 99 wlsxUser6SessionTimeTable OIDs Object ID Object wlsxUser6SessionTimeEntry 1.3.6.1.4.1.14823.2.2.1.14.1.3 wlsxUser6SessionTimeTable 1 wlsxUser6SessionTimeLength 1.3.6.1.4.1.14823.2.2.1.14.1.3.1 wlsxUser6SessionTimeEntry 1 wlsxUser6SessionTimeCount 1.3.6.1.4.1.14823.2.2.1.14.1.3.
| User6 Dell PowerConnect ArubaOS 5.
Chapter 17 Voice The Voice module provides information about Voice call status and call detail reporting. Figure 18 shows the architecture of the User MIB relative to 1.3.6.1.4.1.14823 (iso.org.dod.internet.private.enterprise.aruba). The Voice MIBs are listed in the file aruba-voice.my. For information about downloading Dell MIB files, see “Downloading MIB Files” on page 23. Dell PowerConnect ArubaOS 5.
Figure 18 Voice Hierarchy 1.3.6.1.4.1.14823 Aruba Aruba E nterprise MIB Modules 1.3.6.1.4.1.14823.2 Aruba AP 1.3.6.1.4.1.14823.2.3 1.3.6.1.4.1.14823.2.2.1 wlsr E nterprise MIB Modules wlsx Voice MIB Modules 1.3.6.1.4.1.14823.2.3.1.12 wlsx Voice S tats Group 1.3.6.1.4.1.14823.2.3.1.12.1 wlsx Voice C dr Info Group 1.3.6.1.4.1.14823.2.3.1.12.1.1 wlsx Voice C all C trs Group 1.3.6.1.4.1.14823.2.3.1.12.1.2 1.3.6.1.4.1.14823.2.3.1.12.1.2.
wlsxVoiceCdrTotal The integer object of wlsx Voice CDR total lists the total number of Call Detail Records of the controller. Syntax Unsigned32 Max-Access read-only Status current Description Total number of CDR information in the controller. History Added in ArubaOS 3.2.0.0. wlsxVoiceCdrTable The objects of the wlsx Voice CDR table list information of the Call Detail Records of the controller. Table 101 wlxs Voice CDR Table OIDs Object Object ID wlsxVoiceCdrEntry 1.3.6.1.4.1.14823.2.2.1.12.1.
wlsxVoiceCdrEntry Syntax VoiceCdrEntry Max-Access not-accessible Status current Description Entry point. Index {voiceCdrId} History Added in ArubaOS 3.2.0.0. voiceCdrId Syntax Unsigned32 Max-Access not-accessible Status current Description Voice CDR ID/ History Added in ArubaOS 3.2.0.0. voiceCdrIp Syntax IpAddress Max-Access read-only Status current Description Voice CDR IP. History Added in ArubaOS 3.2.0.0.
Max-Access read-only Status current Description Voice CDR name. History Added in ArubaOS 3.2.0.0. Dell PowerConnect ArubaOS 5.
voiceCdrDialNum Syntax DisplayString Max-Access read-only Status current Description Voice CDR dialed number. History Added in ArubaOS 3.2.0.0. voiceCdrDir Syntax ArubaVoiceCdrDirection Max-Access read-only Status current Description Voice CDR direction incoming or outgoing. History Added in ArubaOS 3.2.0.0. voiceCdrOrigTime Syntax Unsigned32 Max-Access read-only Status current Description Voice CDR original time. History Added in ArubaOS 3.2.0.0.
Status current Description Voice CDR tear-down number. History Added in ArubaOS 3.2.0.0. Dell PowerConnect ArubaOS 5.
voiceCdrStatus Syntax ArubaCallStates Max-Access read-only Status current Description Voice CDR status. History Added in ArubaOS 3.2.0.0. voiceCdrReason Syntax DisplayString Max-Access read-only Status current Description Voice CDR reason. History Added in ArubaOS 3.2.0.0. voiceCdrDuration Syntax Integer32 Max-Access read-only Status current Description Voice CDR duration. History Added in ArubaOS 3.2.0.0.
Status current Description Voice CDR AP switch delay. History Added in ArubaOS 3.2.0.0. Dell PowerConnect ArubaOS 5.
voiceCdrCodec Syntax Integer32 Max-Access read-only Status current Description Voice CDR codec. History Added in ArubaOS 3.2.0.0. voiceCdrApName Syntax DisplayString Max-Access read-only Status current Description Voice CDR AP name. History Added in ArubaOS 3.2.0.0. voiceCdrApMac Syntax MacAddress Max-Access read-only Status current Description Voice CDR AP MAC address. History Added in ArubaOS 3.2.0.0.
Status current Description Voice CDR ESSID. History Added in ArubaOS 3.2.0.0. voiceCdrHandovers Syntax Integer32 Max-Access read-only Status current Description Voice CDR client hand overs, AKA mobility rate. History Added in ArubaOS 3.2.0.0. voiceCdrMOS Syntax Integer32 Max-Access read-only Status current Description Voice CDR MOS. History Added in ArubaOS 3.2.0.0.
Table 102 Voice Call Center OIDs (Continued) 476 | Voice Object Object ID voiceCallCtrsReqTerm 1.3.6.1.4.1.14823.2.2.1.12.1.2.12 wlsxVoiceCallCtrsGroup 12 voiceCallCtrsDecline 1.3.6.1.4.1.14823.2.2.1.12.1.2.13 wlsxVoiceCallCtrsGroup 13 voiceCallCtrsUnauth 1.3.6.1.4.1.14823.2.2.1.12.1.2.14 wlsxVoiceCallCtrsGroup 14 voiceCallCtrsMisc 1.3.6.1.4.1.14823.2.2.1.12.1.2.15 wlsxVoiceCallCtrsGroup 15 Dell PowerConnect ArubaOS 5.
voiceCallCtrsTotal Syntax Unsigned32 Max-Access read-only Status current Description Total number of calls. History Added in ArubaOS 3.2.0.0. voiceCallCtrsSuccess Syntax Unsigned32 Max-Access read-only Status current Description Total number of successful calls. History Added in ArubaOS 3.2.0.0. voiceCallCtrsFailed Syntax Unsigned32 Max-Access read-only Status current Description Total number of failed calls. History Added in ArubaOS 3.2.0.0.
| Voice Status current Description Total number of aborted calls. History Added in ArubaOS 3.2.0.0. Dell PowerConnect ArubaOS 5.
voiceCallCtrsOrig Syntax Unsigned32 Max-Access read-only Status current Description Total number of originated calls. History Added in ArubaOS 3.2.0.0. voiceCallCtrsRecvd Syntax Unsigned32 Max-Access read-only Status current Description Total number of received calls. History Added in ArubaOS 3.2.0.0. voiceCallCtrsActive Syntax Unsigned32 Max-Access read-only Status current Description Total number of active calls. History Added in ArubaOS 3.2.0.0.
| Voice Status current Description Total number of busy calls. History Added in ArubaOS 3.2.0.0. Dell PowerConnect ArubaOS 5.
voiceCallCtrsSvc Syntax Unsigned32 Max-Access read-only Status current Description Total number of service unavailable calls. History Added in ArubaOS 3.2.0.0. voiceCallCtrsReqTerm Syntax Unsigned32 Max-Access read-only Status current Description Total number of request terminated calls. History Added in ArubaOS 3.2.0.0. voiceCallCtrsDecline Syntax Unsigned32 Max-Access read-only Status current Description Total number of declined calls. History Added in ArubaOS 3.2.0.0.
Status current Description Total number of miscellaneous calls. History Added in ArubaOS 3.2.0.0. wlsxVoiceClientTotal The wlsx Voice Client Total group provides the total number of active client session of the controller. Syntax Unsigned32 Max-Access read-only Status current Description Total number of active client sessions in the controller. History Added in ArubaOS 3.2.0.0. wlsxVoiceClientTable The objects of the wlsx Voice Client table list voice client information.
wlsxVoiceClientEntry Syntax VoiceClientEntry Max-Access not-accessible Description Entry point. Index { wlanStaPhyAddress } History Added in ArubaOS 3.2.0.0. voiceClientIp Syntax IpAddress Max-Access read-only Status current Description Voice client IP address. History Added in ArubaOS 3.2.0.0. voiceClientProtocol Syntax ArubaVoipProtocol Max-Access read-only Status current Description Voice client protocol used. History Added in ArubaOS 3.2.0.0.
| Voice Status current Description Voice client contact name. History Added in ArubaOS 3.2.0.0. Dell PowerConnect ArubaOS 5.
voiceClientServerName Syntax DisplayString Max-Access read-only Status current Description Voice client server name. History Added in ArubaOS 3.2.0.0. voiceClientEssid Syntax DisplayString Max-Access read-only Status current Description Voice client ESSID. History Added in ArubaOS 3.2.0.0. voiceClientVlanId Syntax ArubaVlanValidRange Max-Access read-only Status current Description Voice client VLAN ID. History Added in ArubaOS 3.2.0.0.
Status current Description Total number of active VoIP information in the controller. History Added in ArubaOS 3.2.0.0. wlsxVoiceAPBssidTable The objects of the wlsx Voice Access Point BSSID table provide active VoIP information. Table 104 wlsxVoiceAPBssidTable OIDs 486 | Voice Object Object ID wlsxVoiceAPBssidEntry 1.3.6.1.4.1.14823.2.2.1.12.1.4.2.1 wlsxVoiceAPBssidTable 1 voiceAPBssidName 1.3.6.1.4.1.14823.2.2.1.12.1.4.2.1.1 wlsxVoiceAPBssidEntry 1 voiceAPBssidGroup 1.3.6.1.4.1.14823.2.
wlsxVoiceAPBssidEntry Syntax VoiceAPBssidEntry max-Access not-accessible Status current Description Entry to AP. Index {wlanAPMacAddress, wlanAPRadioNumber, wlanAPBSSID} History Added in ArubaOS 3.2.0.0. voiceAPBssidName Syntax DisplayString Max-Access read-only Status current Description Voice access point name. History Added in ArubaOS 3.2.0.0. voiceAPBssidGroup Syntax DisplayString Max-Access read-only Status current Description Voice access point group.
Max-Access read-only Status current Description Voice access point total calls. History Added in ArubaOS 3.2.0.0. voiceAPBssidVoiceType Syntax DisplayString Max-Access read-only Status current Description Voice access point type. History Added in ArubaOS 3.2.0.0.
voiceAPBssidUpTime Syntax TimeTicks Max-Access read-only Status current Description Voice access point up time History Added in ArubaOS 3.2.0.0. voiceAPBssid100Sent Syntax Counter32 Max-Access read-only Status current Description Voice 100 sent. History Added in ArubaOS 3.2.0.0. voiceAPBssid503Sent Syntax Counter32 Max-Access read-only Status current Description Voice 503 sent. History Added in ArubaOS 3.2.0.0.
| Voice Status current Description Voice access point kicked off. History Added in ArubaOS 3.2.0.0. Dell PowerConnect ArubaOS 5.
voiceAPBssidTspecDenied Syntax Counter32 Max-Access read-only Status current Description Voice access point Tspec denied. History Added in ArubaOS 3.2.0.0. voiceAPBssidCacFlag Syntax ArubaVoiceCacBit Max-Access read-only Status current Description Voice access point CAC flag. History Added in ArubaOS 3.2.0.0. voiceAPBssidTotVoiceClients Syntax Unsigned32 Max-Access read-only Status current Description Voice access point total number of voice clients. History Added in ArubaOS 3.
Status current Description Voice access point total SIP calls. History Added in ArubaOS 3.2.0.0. voiceAPBssidCallsSVP Syntax Unsigned32 Max-Access read-only Status current Description Voice access point total SVP calls. History Added in ArubaOS 3.2.0.0. voiceAPBssidCallsVocera Syntax Unsigned32 Max-Access read-only Status current Description Voice access point total Vocera calls. History Added in ArubaOS 3.2.0.0.
Chapter 18 WLAN The wireless local area network (WLAN) module provides information about the Wireless Management System (WMS) in the Dell controller. Figure 19 shows the architecture of the WLAN MIB relative to 1.3.6.1.4.1.14823 (iso.org.dod.internet.private.enterprise.aruba). The WLAN MIBs are listed in the file aruba-wlan.my. For information about downloading Dell MIB files, see “Downloading MIB Files” on page 23. Dell PowerConnect ArubaOS 5.
Figure 19 WLAN Hierarchy Aruba 1.3.6.1.4.1.14823 Aruba Enterprise MIB Modules Switch 1.3.6.1.4.1.14823.2 1.3.6.1.4.1.14823.2.2 wlsx Enterprise MIB Modules wlsx Switch 1.3.6.1.4.1.14823.2.2.1 1.3.6.1.4.1.14823.2.2.1.5 wlsx Wlan Config Group 1.3.6.1.4.1.14823.2.2.1.5.1 wlsx Wlan State Group 1.3.6.1.4.1.14823.2.2.1.5.2 1.3.6.1.4.1.14823.2.2.1.5.3.1 wlsx Wlan Access Point Info Group wlsx Wlan Access Point Info Group 1.3.6.1.4.1.14823.2.2.1.5.2.1.1 1.3.6.1.4.1.14823.2.2.1.5.2.1.
The WLAN MIB contains the following tables. Table 105 WLAN MIB Tables Table Description wlsxWlanAPGroupTable This table lists all the access points groups configured in the Dell controller. wlsxWlanAPTable This table lists all the access points connected to the controller. wlsxWlanRadioTable This table lists all the radios known to the controller. wlsxWlanAPBssidTable This table lists all the BSSIDs advertised by this controller.
wlsxWlanAccessPointInfoGroup The wlsxWlanAccessPointInfoGroup contains the following tables: z wlsxWlanTotalNumAccessPoints (local), which lists all the APs connected to the controller z wlsxWlanTotalNumStationsAssociated (global), which lists all the APs in the Dell Domain. This table is valid only on the master controllers. The group also contains two scalar objects, which indicate the total number of APs and the total number of clients connected.
wlsxWlanAPGroupEntry Syntax WlanAPGroupEntry Max-Access not-accessible Status current Description Index {wlanAPGroup} History Added in ArubaOS 2.3. wlanAPGroup Syntax DisplayString Max-Access not-accessible Status current Description The name of an AP group. History Added in ArubaOS 2.3. Updated in ArubaOS 3.1—description. wlanAPNumAps Syntax Integer32 Max-Access read-only Status current Description The number of APs in the AP group. History Added in ArubaOS 2.3.
Table 108 wlsxWlanAPTable OIDs (Continued) 498 | WLAN Object Object ID wlanAPModel 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.5 wlsxWlanAPEntry 5 wlanAPSerialNumber 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.6 wlsxWlanAPEntry 6 wlanAPdot11aAntennaGain 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.7 wlsxWlanAPEntry 7 wlanAPdot11gAntennaGain 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.8 wlsxWlanAPEntry 8 wlanAPNumRadios 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.9 wlsxWlanAPEntry 9 wlanAPEnet1Mode 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.
wlsxWlanAPEntry Syntax WlanAPEntry Max-Access not-accessible Status current Description Access point entry. Index {wlanAPMacAddress} wlanAPMacAddress Syntax MacAddress Max-Access not-accessible Status current Description Ethernet MAC address of the access point. History Added in ArubaOS 2.3. wlanAPIpAddress Syntax IpAddress Max-Access read-only Status current Description IP address of the access point. History Added in ArubaOS 2.3.
| WLAN Status current Description Group name of the access point. History Added in ArubaOS 2.3. Updated in ArubaOS 3.1—changed Max-Access to read-only. Dell PowerConnect ArubaOS 5.
wlanAPModel Syntax Object Identifier MAX-ACCES read-only Status current Description Sys OID of the access point. History Added in ArubaOS 2.3. wlanAPSerialNumber Syntax DisplayString(Size(0..32)) Max-Access read-only Status current Description Serial number of the access point. History Added in ArubaOS 2.3. wlanAPdot11aAntennaGain Syntax Integer32 Max-Access read-only Status current Description Configured antenna gain for ‘A’ radio. History Added in ArubaOS 2.3.
| WLAN Status current Description Number of radios in the access point. History Added in ArubaOS 2.3. Updated in ArubaOS 3.2.0.0.—description. Dell PowerConnect ArubaOS 5.
wlanAPEnet1Mode Syntax ArubaEnet1Mode Max-Access read-only Status current Description ENET1 mode of the access point. History Added in ArubaOS 2.3. wlanAPIpsecMode Syntax ArubaEnableValue Max-Access read-only Status current Description IPsec mode of the access point. History Added in ArubaOS 2.3. wlanAPUpTime Syntax TimeTicks Max-Access read-only Status current Description Time (in hundredths of seconds) since the last time the access point boot strapped with the controller.
| WLAN Status current Description Location of the access point History Added in ArubaOS 2.3. Dell PowerConnect ArubaOS 5.
wlanAPBuilding Syntax Integer32 Max-Access read-only Status current Description AP building number. History Added in ArubaOS 2.3. wlanAPFloor Syntax Integer32 Max-Access read-only Status current Description AP floor number. History Added in ArubaOS 2.3. wlanAPLoc Syntax Integer32 Max-Access read-only Status current Description AP location. History Added in ArubaOS 2.3.
| WLAN Status current Description AP status. History Added in ArubaOS 2.3. Dell PowerConnect ArubaOS 5.
wlanAPNumBootstraps Syntax Integer32 Max-Access read-only Status current Description Number of times the AP has boot strapped with the controller. History Added in ArubaOS 2.3. wlanAPNumReboots Syntax Integer32 Max-Access read-only Status current Description Number of times the AP has rebooted. History Added in ArubaOS 2.3.
| WLAN Max-Access read-only Status current Description The building component of the AP’s FQLN. History Added in ArubaOS 3.1.0.0. Dell PowerConnect ArubaOS 5.
wlanAPFQLNFloor Syntax DisplayString Max-Access read-only Status current Description The floor component of the AP’s FQLN. History Added in ArubaOS 3.1.0.0. wlanAPFQLN Syntax DisplayString Max-Access read-only Status current Description The AP’s fully qualified location name (FQLN). History Added in ArubaOS 3.1.0.0. wlanAPFQLNCampus Syntax DisplayString Max-Access read-only Status current Description The campus component of the AP’s FQLN. History Added in ArubaOS 3.
Status current Description Latitude of the AP. signed floating-point value. History Added in ArubaOS 3.2.0.0. wlanAPAltitude Syntax DisplayString Max-Access read-only Status current Description Altitude of the AP signed floating-point value. History Added in ArubaOS 3.2.0.0. wlanAPMeshRole Syntax ArubaMeshRole Max-Access read-only Status current Description AP mesh role. History Added in ArubaOS 3.2.0.0.
Table 109 wlsxWlanRadioTable OIDs (Continued) Object Object ID wlanAPRadioNumMonitoredBSSIDs 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.10 wlsxWlanRadioEntry 10 wlanAPRadioBearing 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.11 wlsxWlanRadioEntry 11 wlanAPRadioTiltAngle 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.12 wlsxWlanRadioEntry 12 wlanAPRadioHTMode 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.13 wlsxWlanRadioEntry 13 wlanAPRadioHTExtChannel 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.14 wlsxWlanRadioEntry 14 wlanAPRadioHTChannel 1.
wlsxWlanRadioEntry Syntax WlanRadioEntry Max-Access not-accessible Status current Description Index {wlanAPMacAddress, wlanAPRadioNumber} History Added in ArubaOS 2.3. wlanAPRadioNumber Syntax Integer32 Max-Access not-accessible Status current Description The number of the radio History Added in ArubaOS 2.3. Updated in ArubaOS 3.2.0.0.—description. wlanAPRadioType Syntax ArubaPhyType Max-Access read-write Status current Description Type of the radio History Added in ArubaOS 2.3.
Max-Access read-only Status current Description The current power level of the access point radio. History Added in ArubaOS 2.3. Updated in ArubaOS OS 3.2—description. Dell PowerConnect ArubaOS 5.
wlanAPRadioMode Syntax ArubaAccessPointMode Max-Access read-only Status current Description The mode in which the access point radio is operating. History Added in ArubaOS 2.3. Updated in ArubaOS OS 3.2—description. wlanAPRadioUtilization Syntax Integer32 Max-Access read-only Status current Description The utilization of the radio as a percentage of the total capacity. History Added in ArubaOS 2.3.
Status current Description The number of AP BSSIDs this radio is monitoring. History Added in ArubaOS 2.3. Updated in ArubaOS 3.2.0.0.—description. Dell PowerConnect ArubaOS 5.
wlanAPRadioNumMonitoredBSSIDs Syntax Integer32 Max-Access read-only Status current Description The number of AP BSSIDs we are monitoring on this radio. History Added in ArubaOS 2.3. wlanAPRadioBearing Syntax DisplayString Max-Access read-only Status current Description Antenna bearing in degrees from true north. Unsigned floating-point value. Range: 0-360. History Added in ArubaOS 3.2.0.0.
wlanAPRadioHTExtChannel Syntax ArubaHTExtChannel Max-Access read-only Status current Description Indicates the offset of the 40MHz extension channel, if any. History Added in ArubaOS 3.3.0.0. wlanAPRadioHTChannel Syntax DisplayString Max-Access read-write Status current Description A display string indicating the current channel. If wlanAPRadioHTExtChannel is set to 'above' or 'below', then the channel number will be appended with '+' or '-' respectively. History Added in ArubaOS 3.3.0.0.
Table 110 wlsxWlanAPBssidTable OIDs (Continued) 518 | WLAN Object Object ID wlanAPBssidRogueType 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.6 wlsxWlanAPBssidEntry 6 wlanAPBssidMode 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.7 wlsxWlanAPBssidEntry 7 wlanAPBssidChannel 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.8 wlsxWlanAPBssidEntry 8 wlanAPBssidUpTime 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.9 wlsxWlanAPBssidEntry 9 wlanAPBssidInactiveTime 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.
wlsxWlanAPBssidEntry Syntax WlanAPBssidEntry Max-Access not-accessible Status current Description Station management entry. Index {wlanAPMacAddress, wlanAPRadioNumber, wlanAPBSSID} History Added in ArubaOS 2.3. wlanAPBSSID Syntax MacAddress Max-Access not-accessible Status current Description The MAC address of the access point. History Added in ArubaOS 2.3. Updated in ArubaOS 3.2.0.0.—description. wlanAPESSID Syntax DisplayString(Size(0..
wlanAPBssidPort Syntax Unsigned32 Max-Access read-only Status current Description Port to which the access point is connected. History Added in ArubaOS 2.3. wlanAPBssidPhyType Syntax ArubaPhyType Max-Access read-only Status current Description Physical layer protocol support of the AP. History Added in ArubaOS 2.3. wlanAPBssidRogueType Syntax ArubaRogueApType Max-Access read-only Status current Description The type of the rogue. History Added in ArubaOS 2.3.
wlanAPBssidChannel Syntax Integer(1..165) Max-Access read-only Status current Description The current operating channel. History Added in ArubaOS 2.3. Updated in ArubaOS 3.2.0.0.—description. wlanAPBssidUpTime Syntax TimeTicks Max-Access read-only Status current Description Time (in hundredths of seconds) since a tunnel is created between the access point and controller. History Added in ArubaOS 2.3.
| WLAN Status current Description Indicates the number of stations associated to this BSSID. History Added in ArubaOS 2.3. Updated in ArubaOS 3.2.0.0.—description. Dell PowerConnect ArubaOS 5.
wlanAPBssidAPMacAddress Syntax MacAddress Max-Access read-only Status current Description Indicates the access point to which this BSSID belongs. History Added in ArubaOS 2.3. wlanAPBssidPhyNumber Syntax Integer32 Max-Access read-only Status current Description Indicates the radio number to which this BSSID belongs. History Added in ArubaOS 2.3. wlanAPBssidHTMode Syntax ArubaHTMode Max-Access read-only Status current Description Indicates the HT mode of this BSSID, if any.
Status current Description A display string indicating the current channel. If wlanAPBssidHTExtChannel is set to 'above' or 'below', then the channel number will be appended with '+' or '-' respectively. History Added in ArubaOS 3.3.0.0. wlsxWlanESSIDTable The objects of the wlsx WLAN ESSID table provide information of the access points to the controller. Table 111 wlsxWlanESSIDTableOBJECT OIDs 524 | WLAN Object Object ID wlsxWlanESSIDEntry 1.3.6.1.4.1.14823.2.2.1.5.2.1.8.
wlsxWlanESSIDEntry Syntax WlanESSIDEntry Max-Access not-accessible Status current Description ESSID entry. Index {wlanESSID} History Added in ArubaOS 2.3. Update in ArubaOS 3.1—description. wlanESSID Syntax DisplayString(Size(0..64)) Max-Access not-accessible Status current Description The ESSID being advertised. History Added in ArubaOS 2.3. Updated in ArubaOS 3.1—description.
wlanESSIDNumAccessPointsDown Syntax Unsigned32 Max-Access read-only Status current Description The number of APs configured to advertise this ESSID that are not currently operational. History Added in ArubaOS 2.3. Updated in ArubaOS 3.1—description. wlanESSIDEncryptionType Syntax ArubaEncryptionMethods Max-Access read-only Status current Description The encryption methods supported on this ESSID. History Added in ArubaOS 2.3. Updated in ArubaOS 3.1—description.
wlsxWlanESSIDVLANPoolEntry Syntax WlanESSIDVLANPoolEntry Max-Access not-accessible Status current Description Station management entry. History Added in ArubaOS 2.3. wlanESSIDVLANId Syntax Unsigned32 Max-Access not-accessible Status current Description VLAN which is part of the VLAN pool for this ESSID. History Added in ArubaOS 2.3. wlanESSIDVLANPoolStatus Syntax Row Status Max-Access read-create Status current Description Row status object used to indicate the status of the row.
Table 113 wlsxWlanStationTable OIDs (Continued) 528 | WLAN Object Object ID wlanStaVLANId 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.7 wlsxWlanStationEntry 7 wlanStaVOIPState 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.8 wlsxWlanStationEntry 8 wlanStaVOIPProtocol 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.9 wlsxWlanStationEntry 9 wlanStaTransmitRate 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.10 wlsxWlanStationEntry 10 wlanStaAssociationID 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.
wlsxWlanStationEntry Syntax WlanStationEntry Max-Access not-accessible Status current Description Station entry. Index {wlanStaPhyAddress} History Added in ArubaOS 2.3. wlanStaPhyAddress Syntax MacAddress Max-Access not-accessible Status current Description The physical address of the station. History Added in ArubaOS 2.3. wlanStaApBssid Syntax MacAddress Max-Access not-accessible Status current Description The access point with which this station was last associated.
| WLAN Max-Access read-only Status current Description Indicates whether the station is authenticated. History Added in ArubaOS 2.3. Updated in ArubaOS 3.1—description. Dell PowerConnect ArubaOS 5.
wlanStaIsAssociated Syntax TruthValue Max-Access read-only Status current Description Indicates whether the station is associated. History Added in ArubaOS 2.3. Updated in ArubaOS 3.1—description. wlanStaChannel Syntax Integer(1..165) Max-Access read-only Status current Description Channel on which the station is associated. History Added in ArubaOS 2.3. wlanStaVLANId Syntax ArubaVLANValidRange Max-Access read-only Status current Description VLAN in which the station is present.
| WLAN Status current Description If VoIP is enabled, the type of the protocol supported. History Added in ArubaOS 2.3. Dell PowerConnect ArubaOS 5.
wlanStaTransmitRate Syntax Unsigned32 Max-Access read-only Status current Description AID with which the station is associated with this system. History Added in ArubaOS 2.3. wlanStaAssociationID Syntax Unsigned32 Max-Access read-only Status current Description AID with which the station is associated with this system. History Added in ArubaOS 2.3. wlanStaAccessPointESSID Syntax DisplayString(Size(0..64)) Max-Access read-only Status current Description ESSID of the access point.
Status current Description Signal-to-noise ratio for the station. History Added in ArubaOS 2.3. wlanStaUpTime Syntax TimeTicks Max-Access read-only Status current Description Time since the station associated to the current BSSID. History Added in ArubaOS 2.3. wlanStaHTMode Syntax ArubaHTMode Max-Access read-only Status current Description The HT status of the station. History Added in ArubaOS 3.3.0.
Table 114 wlsxWlanAPStatsTable OIDs (Continued) Object Object ID wlanAPFrameLowSpeedRate 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.11 wlsxWlanAPStatsEntry 11 wlanAPFrameNonUnicastRate 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.12 wlsxWlanAPStatsEntry 12 wlanAPFrameFragmentationRate 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.13 wlsxWlanAPStatsEntry 13 wlanAPFrameBandwidthRate 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.14 wlsxWlanAPStatsEntry 14 wlanAPFrameRetryErrorRate 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.
wlsxWlanAPStatsEntry Syntax WlanAPStatsEntry Max-Access not-accessible Status current Description Access point stats entry. Index {wlanAPMacAddress, wlanAPRadioNumber, wlanAPBSSID} History Added in ArubaOS 2.3. wlanAPCurrentChannel Syntax Unsigned32 Max-Access read-only Status current Description The channel the AP is currently using. History Added in ArubaOS 2.3. Updated in ArubaOS 3.1—description.
wlanAPTxBytes Syntax Counter32 Max-Access read-only Status current Description The number of bytes transmitted on this BSSID. History Added in ArubaOS 2.3. Updated in ArubaOS 3.1—description. wlanAPRxPkts Syntax Counter32 Max-Access read-only Status current Description The number of packets received on this BSSID. History Added in ArubaOS 2.3. Updated in ArubaOS 3.1—description.
| WLAN Max-Access read-only Status current Description The number of deauthentications received on this BSSID. History Added in ArubaOS 2.3. Updated in ArubaOS 3.1—description. Dell PowerConnect ArubaOS 5.
wlanAPChannelThroughput Syntax Integer32 Max-Access read-only Status current Description The throughput achieved on this channel. History Added in ArubaOS 2.3. Updated in ArubaOS 3.1—description. wlanAPFrameRetryRate Syntax Integer32 Max-Access read-only Status current Description The number of retry packets as a percentage of the total packets transmitted and received by this BSSID. History Added in ArubaOS 2.3. Updated in ArubaOS 3.1—description.
wlanAPFrameFragmentationRate Syntax Integer32 Max-Access read-only Status current Description The number of fragments as a percentage of the total packets transmitted by this BSSID. History Added in ArubaOS 2.3. Updated in ArubaOS 3.1—description. wlanAPFrameBandwidthRate Syntax Integer32 Max-Access read-only Status current Description The bandwidth of this BSSID in Kbps. History Added in ArubaOS 2.3. Updated in ArubaOS 3.1—description.
wlanAPFrameReceiveErrorRate Syntax Integer32 Max-Access read-only Status current Description The number of error packets as a percentage of the total packets received on this BSSID. History Added in ArubaOS 2.5. wlanAPRxDataPkts Syntax Counter32 Max-Access read-only Status deprecated Description The number of packets received on this BSSID. History Added in ArubaOS 2.5. Deprecated in ArubaOS 3.2.0.0.
| WLAN Max-Access read-only Status deprecated Description The number of bytes transmitted on this BSSID. History Added in ArubaOS 2.5. Deprecated in ArubaOS 3.2.0.0. Dell PowerConnect ArubaOS 5.
wlanAPRxDataPkts64 Syntax Counter64 Max-Access read-only Status current Description The number of packets received on this BSSID. History Added in ArubaOS 3.2.0.0. wlanAPRxDataBytes64 Syntax Counter64 Max-Access read-only Status current Description The number of bytes received on this BSSID. History Added in ArubaOS 3.2.0.0. wlanAPTxDataPkts64 Syntax Counter64 Max-Access read-only Status current Description The number of packets transmitted on this BSSID.
Table 115 wlsxWlanAPRateStatsTable OIDs Object Object ID wlsxWlanAPRateStatsEntry 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1 wlsxWlanAPRateStatsTable 1 wlanAPStatsTotPktsAt1Mbps 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.1 wlsxWlanAPRateStatsEntry 1 wlanAPStatsTotBytesAt1Mbps 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.2 wlsxWlanAPRateStatsEntry 2 wlanAPStatsTotPktsAt2Mbps 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.3 wlsxWlanAPRateStatsEntry 3 wlanAPStatsTotBytesAt2Mbps 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.
Table 115 wlsxWlanAPRateStatsTable OIDs (Continued) Object Object ID wlanAPStatsTotBytesAtHT19dot5Mbps 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.34 wlsxWlanAPRateStatsEntry 34 wlanAPStatsTotPktsAtHT26Mbps 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.35 wlsxWlanAPRateStatsEntry 35 wlanAPStatsTotBytesAtHT26Mbps 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.36 wlsxWlanAPRateStatsEntry 36 wlanAPStatsTotPktsAtHT27Mbps 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.37 wlsxWlanAPRateStatsEntry 37 wlanAPStatsTotBytesAtHT27Mbps 1.3.6.1.4.1.
Table 115 wlsxWlanAPRateStatsTable OIDs (Continued) Object Object ID wlanAPStatsTotBytesAtHT117Mbps 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.68 wlsxWlanAPRateStatsEntry 68 wlanAPStatsTotPktsAtHT120Mbps 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.69 wlsxWlanAPRateStatsEntry 69 wlanAPStatsTotBytesAtHT120Mbps 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.70 wlsxWlanAPRateStatsEntry 70 wlanAPStatsTotPktsAtHT121dot5Mbps 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.71 wlsxWlanAPRateStatsEntry 71 wlanAPStatsTotBytesAtHT121dot5Mbps 1.3.6.
wlsxWlanAPRateStatsEntry Syntax wlsxWlanAPRateStatsEntry Max-Access not-accessible Status current Description User entry. Index {wlanAPMacAddress, wlanAPRadioNumber, wlanAPBSSID} History Added in ArubaOS 2.3. wlanAPStatsTotPktsAt1Mbps Syntax Counter32 Max-Access read-only Status current Description The total number of packets observed on this BSSID at 1Mbps rate. History Added in ArubaOS 2.3.
| WLAN Max-Access read-only Status current Description The total number of bytes observed on this BSSID at 2 Mbps rate. History Added in ArubaOS 2.3. Dell PowerConnect ArubaOS 5.
wlanAPStatsTotPktsAt5Mbps Syntax Counter32 Max-Access read-only Status current Description The total number of packets observed on this BSSID at 5 Mbps rate. History Added in ArubaOS 2.3. wlanAPStatsTotBytesAt5Mbps Syntax Counter32 Max-Access read-only Status current Description The total number of bytes observed on this BSSID at 5 Mbps rate. History Added in ArubaOS 2.3.
| WLAN Status current Description The total number of packets observed on this BSSID at 6 Mbps rate. History Added in ArubaOS 2.3. Dell PowerConnect ArubaOS 5.
wlanAPStatsTotBytesAt6Mbps Syntax Counter32 Max-Access read-only Status current Description The total number of bytes observed on this BSSID at 6 Mbps rate. History Added in ArubaOS 2.3. wlanAPStatsTotPktsAt12Mbps Syntax Counter32 Max-Access read-only Status current Description The total number of packets observed on this BSSID at 12 Mbps rate. History Added in ArubaOS 2.3.
| WLAN Status current Description The total number of bytes observed on this BSSID at 18 Mbps rate. History Added in ArubaOS 2.3. Dell PowerConnect ArubaOS 5.
wlanAPStatsTotPktsAt24Mbps Syntax Counter32 Max-Access read-only Status current Description The total number of packets observed on this BSSID at 24 Mbps rate. History Added in ArubaOS 2.3. wlanAPStatsTotBytesAt24Mbps Syntax Counter32 Max-Access read-only Status current Description The total number of bytes observed on this BSSID at 24 Mbps rate. History Added in ArubaOS 2.3.
| WLAN Status current Description The total number of packets observed on this BSSID at 48 Mbps rate. History Added in ArubaOS 2.3. Dell PowerConnect ArubaOS 5.
wlanAPStatsTotBytesAt48Mbps Syntax Counter32 Max-Access read-only Status current Description The total number of bytes observed on this BSSID at 48 Mbps rate. History Added in ArubaOS 2.3. wlanAPStatsTotPktsAt54Mbps Syntax Counter32 Max-Access read-only Status current Description The total number of packets observed on this BSSID at 54 Mbps rate. History Added in ArubaOS 2.3.
| WLAN Status current Description The total number of bytes observed on this BSSID at 9 Mbps rate. History Added in ArubaOS 2.3. Dell PowerConnect ArubaOS 5.
wlanAPStatsTotPktsAtHT6dot5Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observed on this BSSID at the HT 6.5 rate. History Added in ArubaOS 3.3.0.0. wlanAPStatsTotBytesAtHT6dot5Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of bytes observed on this BSSID at the HT 6.5 rate. History Added in ArubaOS 3.3.0.0.
| WLAN Status current Description This attribute indicates the total number of packets observedon this BSSID at the HT 13.5 rate. History Added in ArubaOS 3.3.0.0. Dell PowerConnect ArubaOS 5.
wlanAPStatsTotBytesAtHT13dot5Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of bytes observed on this BSSID at the HT 13.5 rate. History Added in ArubaOS 3.3.0.0. wlanAPStatsTotPktsAtHT15Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observed on this BSSID at the HT 15.0 rate. History Added in ArubaOS 3.3.0.0.
| WLAN Status current Description This attribute indicates the total number of bytes observed on this BSSID at the HT 19.5 rate. History Added in ArubaOS 3.3.0.0. Dell PowerConnect ArubaOS 5.
wlanAPStatsTotPktsAtHT26Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observed on this BSSID at the HT 26.0 rate. History Added in ArubaOS 3.3.0.0. wlanAPStatsTotBytesAtHT26Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of bytes observed on this BSSID at the HT 26.0 rate. History Added in ArubaOS 3.3.0.0.
| WLAN Status current Description This attribute indicates the total number of packets observed on this BSSID at the HT 30.0 rate. History Added in ArubaOS 3.3.0.0. Dell PowerConnect ArubaOS 5.
wlanAPStatsTotBytesAtHT30Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of bytes observed on this BSSID at the HT 30.0 rate. History Added in ArubaOS 3.3.0.0. wlanAPStatsTotPktsAtHT39Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observed on this BSSID at the HT 39.0 rate. History Added in ArubaOS 3.3.0.0.
| WLAN Description This attribute indicates the total number of bytes observed on this BSSID at the HT 40.5 rate. History Added in ArubaOS 3.3.0.0. Dell PowerConnect ArubaOS 5.
wlanAPStatsTotPktsAtHT45Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observed on this BSSID at the HT 45.0 rate. History Added in ArubaOS 3.3.0.0. wlanAPStatsTotBytesAtHT45Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of bytes observed on this BSSID at the HT 45.0 rate. History Added in ArubaOS 3.3.0.0.
| WLAN Status current Description This attribute indicates the total number of packets observed on this BSSID at the HT 54.0 rate. History Added in ArubaOS 3.3.0.0. Dell PowerConnect ArubaOS 5.
wlanAPStatsTotBytesAtHT54Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of bytes observed on this BSSID at the HT 54.0 rate. History Added in ArubaOS 3.3.0.0. wlanAPStatsTotPktsAtHT58dot5Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observed on this BSSID at the HT 58.5 rate. History Added in ArubaOS 3.3.0.0.
| WLAN Status current Description This attribute indicates the total number of bytes observed on this BSSID at the HT 60.0 rate. History Added in ArubaOS 3.3.0.0. Dell PowerConnect ArubaOS 5.
wlanAPStatsTotPktsAtHT65Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observed on this BSSID at the HT 65.0 rate. History Added in ArubaOS 3.3.0.0. wlanAPStatsTotBytesAtHT65Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of bytes observed on this BSSID at the HT 65.0 rate. History Added in ArubaOS 3.3.0.0.
| WLAN Status current Description This attribute indicates the total number of packets observed on this BSSID at the HT 81.0 rate. History Added in ArubaOS 3.3.0.0. Dell PowerConnect ArubaOS 5.
wlanAPStatsTotBytesAtHT81Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of bytes observed on this BSSID at the HT 81.0 rate. History Added in ArubaOS 3.3.0.0. wlanAPStatsTotPktsAtHT90Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observed on this BSSID at the HT 90.0 rate. History Added in ArubaOS 3.3.0.0.
| WLAN Status current Description This attribute indicates the total number of bytes observed on this BSSID at the HT 104.0 rate. History Added in ArubaOS 3.3.0.0. Dell PowerConnect ArubaOS 5.
\wlanAPStatsTotPktsAtHT108Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observed on this BSSID at the HT 108.0 rate. History Added in ArubaOS 3.3.0.0. wlanAPStatsTotBytesAtHT108Mbps Syntax Counter32 Max-Access read-only Status5 current Description This attribute indicates the total number of bytes observed on this BSSID at the HT 108.0 rate. History Added in ArubaOS 3.3.0.0.
| WLAN Status current Description This attribute indicates the total number of packets observed on this BSSID at the HT 120.0 rate. History Added in ArubaOS 3.3.0.0. Dell PowerConnect ArubaOS 5.
wlanAPStatsTotBytesAtHT120Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of bytes observed on this BSSID at the HT 120.0 rate. History Added in ArubaOS 3.3.0.0. wlanAPStatsTotPktsAtHT121dot5Mbps Syntax Counter32 Max-Access read-only Status current] Description This attribute indicates the total number of packets observed on this BSSID at the HT 121.5 rate. History Added in ArubaOS 3.3.0.0.
| WLAN Status current Description This attribute indicates the total number of bytes observed on this BSSID at the HT 130.0 rate. History Added in ArubaOS 3.3.0.0. Dell PowerConnect ArubaOS 5.
wlanAPStatsTotPktsAtHT135Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observed on this BSSID at the HT 135.0 rate. History Added in ArubaOS 3.3.0.0. wlanAPStatsTotBytesAtHT135Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of bytes observed on this BSSID at the HT 135.0 rate. History Added in ArubaOS 3.3.0.0.
| WLAN Max-Access read-only Status current Description This attribute indicates the total number of packets observed on this BSSID at the HT 162.0 rate. History Added in ArubaOS 3.3.0.0. Dell PowerConnect ArubaOS 5.
wlanAPStatsTotBytesAtHT162Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of bytes observed on this BSSID at the HT 162.0 rate. History Added in ArubaOS 3.3.0.0. wlanAPStatsTotPktsAtHT180Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observedbon this BSSID at the HT 180.0 rate.
| WLAN Description This attribute indicates the total number of bytes observed on this BSSID at the HT 216.0 rate. History Added in ArubaOS 3.3.0.0. Dell PowerConnect ArubaOS 5.
wlanAPStatsTotPktsAtHT240Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observed on this BSSID at the HT 240.0 rate. History Added in ArubaOS 3.3.0.0. wlanAPStatsTotBytesAtHT240Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of bytes observed on this BSSID at the HT 240.0 rate.
Description This attribute indicates the total number of packets observed on this BSSID at the HT 270.0 rate. History Added in ArubaOS 3.3.0.0. wlanAPStatsTotBytesAtHT270Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of bytes observedon this BSSID at the HT 270.0 rate. History Added in ArubaOS 3.3.0.0.
Table 116 wlsxWlanAPDATypeStatsTable OIDs (Continued) Object Object ID wlanAPStatsTotDABroadcastBytes 1.3.6.1.4.1.14823.2.2.1.5.3.1.3.1.2 wlsxWlanAPDATypeStatsEntry 2 wlanAPStatsTotDAMulticastPkts 1.3.6.1.4.1.14823.2.2.1.5.3.1.3.1.3 wlsxWlanAPDATypeStatsEntry 3 wlanAPStatsTotDAMulticastBytes 1.3.6.1.4.1.14823.2.2.1.5.3.1.3.1.4 wlsxWlanAPDATypeStatsEntry 4 wlanAPStatsTotDAUnicastPkts 1.3.6.1.4.1.14823.2.2.1.5.3.1.3.1.5 wlsxWlanAPDATypeStatsEntry 5 wlanAPStatsTotDAUnicastBytes 1.3.6.1.4.1.
wlsxWlanAPDATypeStatsEntry Syntax wlsxWlanAPDATypeStatsEntry Max-Access not-accessible Status current Description User entry. Index {wlanAPMacAddress, wlanAPRadioNumber, wlanAPBSSID} History Added in ArubaOS 2.3. wlanAPStatsTotDABroadcastPkts Syntax Counter32 Max-Access read-only Status current Description The total number of broadcast packets observed on this BSSID. History Added in ArubaOS 2.3.
Max-Access read-only Status current Description The total number of multicast bytes observed on this BSSID. History Added in ArubaOS 2.3. wlanAPStatsTotDAUnicastPkts Syntax Counter32 Max-Access read-only Status current Description The total number of unicast packets observed on this BSSID. History Added in ArubaOS 2.3. wlanAPStatsTotDAUnicastBytes Syntax Counter32 Max-Access read-only Status current Description The total number of unicast bytes observed on this BSSID.
wlsxWlanAPFrameTypeStatsEntry Syntax wlsxWlanAPFrameTypeStatsEntry Max-Access not-accessible Status current Description User entry. Index {wlanAPMacAddress, wlanAPRadioNumber, wlanAPBSSID} History Added in ArubaOS 2.3. wlanAPStatsTotMgmtPkts Syntax Counter32 Max-Access read-only Status current Description The total number of management packets observed on this BSSID. History Added in ArubaOS 2.3.
Max-Access read-only Status current Description The total number of control bytes observed on this BSSID. History Added in ArubaOS 2.3. wlanAPStatsTotDataPkts Syntax Counter32 Max-Access read-only Status current Description The total number of data packets observed on this BSSID. History Added in ArubaOS 2.3. wlanAPStatsTotDataBytes Syntax Counter32 Max-Access read-only Status current Description The total number of data bytes observed on this BSSID. History Added in ArubaOS 2.3.
wlsxWlanAPPktSizeStatsEntry Syntax wlsxWlanAPPktSizeStatsEntry Max-Access not-accessible Status current Description User entry. Index {wlanAPMacAddress, wlanAPRadioNumber, wlanAPBSSID} History Added in ArubaOS 2.3. wlanAPStatsPkts63Bytes Syntax Counter32 Max-Access read-only Status current Description The total number of packets that were less than 64 bytes long. History Added in ArubaOS 2.3.
Max-Access read-only Status current Description The total number of packets that were between 256 and 511 bytes long. History Added in ArubaOS 2.3. wlanAPStatsPkts512To1023 Syntax Counter32 Max-Access read-only Status current Description The total number of packets that were between 512 and 1023 bytes long. History Added in ArubaOS 2.3.
Table 119 wlsxWlanAPChStatsTableOIDs (Continued) 590 | WLAN Object Object OID wlanAPChNoise 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.9 wlsxWlanAPChStatsEntry 9 wlanAPChCoverageIndex 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.10 wlsxWlanAPChStatsEntry 10 wlanAPChInterferenceIndex 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.11 wlsxWlanAPChStatsEntry 11 wlanAPChFrameRetryRate 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.12 wlsxWlanAPChStatsEntry 12 wlanAPFrameLowSpeedRate 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.
wlsxWlanAPChStatsEntry Syntax WlanAPChStatsEntry Max-Access not-accessible Status current Description Access point channel stats entry. Index {wlanAPMacAddress, wlanAPRadioNumber} History Added in ArubaOS 2.3. wlanAPChannelNumber Syntax Integer(1..165) Max-Access read-only Status current Description The channel the AP is currently using. History Added in ArubaOS 2.3. Updated in ArubaOS 3.1—description.
| WLAN Max-Access read-only Status current Description The total bytes observed on this channel. History Added in ArubaOS 2.3. Dell PowerConnect ArubaOS 5.
wlanAPChTotRetryPkts Syntax Counter32 Max-Access read-only Status current Description The total retry packets observed on this channel. History Added in ArubaOS 2.3. wlanAPChTotFragmentedPkts Syntax Counter32 Max-Access read-only Status current Description The total fragmented packets observed on this channel. History Added in ArubaOS 2.3.
| WLAN Status current Description The noise observed on this channel. History Added in ArubaOS 2.3. Updated in ArubaOS 3.1—description. Dell PowerConnect ArubaOS 5.
wlanAPChCoverageIndex Syntax Integer32 Max-Access read-only Status current Description The coverage provided by the AP on this channel. History Added in ArubaOS 2.3. Updated in ArubaOS 3.1—description. wlanAPChInterferenceIndex Syntax Integer32 Max-Access read-only Status current Description The interference observed on this channel. History Added in ArubaOS 2.3. Updated in ArubaOS 3.1—description.
wlanAPChFrameNonUnicastRate Syntax Integer32 Max-Access read-only Status current Description The number of broadcast and multicast packets as a percentage of the total packets transmitted on this channel. History Added in ArubaOS 2.3. Updated in ArubaOS 3.1—description. wlanAPChFrameFragmentationRate Syntax Integer32 Max-Access read-only Status current Description The number of fragments as a percentage of the total packets transmitted on this channel. History Added in ArubaOS 2.3.
wlanAPChBusyRate Syntax Integer32 Max-Access read-only Status current Description How busy this channel is. History Added in ArubaOS 2.3. Updated in ArubaOS 3.1—description. wlanAPChNumAPs Syntax Integer32 Max-Access read-only Status current Description The number of access points observed on this channel. History Added in ArubaOS 2.3. Updated in ArubaOS 3.1—description.
Table 120 wlsxWlanStationStatsTable OIDs (Continued) 598 | WLAN Object Object OID wlanStaRxBytes 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.5 wlsxWlanStationStatsEntry 5 wlanStaTxBCastPkts 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.6 wlsxWlanStationStatsEntry 6 wlanStaRxBCastBytes 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.7 wlsxWlanStationStatsEntry 7 wlanStaTxMCastPkts 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.8 wlsxWlanStationStatsEntry 8 wlanStaRxMCastBytes 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.
wlsxWlanStationStatsEntry Syntax WlanStationStatsEntry Max-Access not-accessible Status current Description Station stats entry. Index {wlanStaPhyAddress} History Added in ArubaOS 2.3. Updated ArubaOS 3.1—description. wlanStaChannelNum Syntax Unsigned32 Max-Access read-only Status current Description The channel the station is currently using. History Added in ArubaOS 2.3. Updated ArubaOS 3.1—description.
wlanStaRxPkts Syntax Counter32 Max-Access read-only Status current Description The number of packets received by this station. History Added in ArubaOS 2.3. Updated ArubaOS 3.1—description. wlanStaRxBytes Syntax Counter32 Max-Access read-only Status current Description The number of bytes received by this station. History Added in ArubaOS 2.3. Updated ArubaOS 3.1—description.
wlanStaTxMCastPkts Syntax Counter32 Max-Access read-only Status current Description The number of multicast packets transmitted by this station. History Added in ArubaOS 2.3. Updated ArubaOS 3.1—description. wlanStaRxMCastBytes Syntax Counter32 Max-Access read-only Status current Description The number of multicast bytes transmitted by this station. History Added in ArubaOS 2.3. Updated ArubaOS 3.1—description.
wlanStaNumAssocRequests Syntax Counter32 Max-Access read-only Status current Description The number of association requests transmitted by this station. History Added in ArubaOS 2.3. Updated ArubaOS 3.1—description. wlanStaNumAuthRequests Syntax Counter32 Max-Access read-only Status current Description The number of authentication requests transmitted by this station. History Added in ArubaOS 2.3. Updated ArubaOS 3.1—description.
wlanStaFrameRetryRate Syntax Integer32 Max-Access read-only Status current Description The number of retry packets as a percentage of the total packets transmitted and received by this station. History Added in ArubaOS 2.3. Updated ArubaOS 3.1—description.
wlanStaFrameBandwidthRate Syntax Integer32 Max-Access read-only Status current Description The bandwidth of this station in Kbps. History Added in ArubaOS 2.3. Updated ArubaOS 3.1—description. wlanStaFrameRetryErrorRate Syntax Integer32 Max-Access read-only Status current Description The number of error packets as a percentage of the total packets received by this station. History Added in ArubaOS 2.3. Updated ArubaOS 3.1—description.
information is grouped by data rate. Table 121 wlsxWlanStaRateStatsTable OIDs Object Object OID wlsxWlanStaRateStatsEntry 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1 wlsxWlanStaRateStatsTable 1 wlanStaTxPktsAt1Mbps 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.1 wlsxWlanStaRateStatsEntry 1 wlanStaTxBytesAt1Mbps 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.2 wlsxWlanStaRateStatsEntry 2 wlanStaTxPktsAt2Mbps 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.3 wlsxWlanStaRateStatsEntry 3 wlanStaTxBytesAt2Mbps 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.
Table 121 wlsxWlanStaRateStatsTable OIDs (Continued) 606 | WLAN Object Object OID wlanStaRxPktsAt12Mbps 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.33 wlsxWlanStaRateStatsEntry 33 wlanStaRxBytesAt12Mbps 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.34 wlsxWlanStaRateStatsEntry 34 wlanStaRxPktsAt18Mbps 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.35 wlsxWlanStaRateStatsEntry 35 wlanStaRxBytesAt18Mbps 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.36 wlsxWlanStaRateStatsEntry 36 wlanStaRxPktsAt24Mbps 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.
wlsxWlanStaRateStatsEntry Syntax wlsxWlanStaRateStatsEntry Max-Access not-accessible Status current Description User entry. Index {wlanStaPhyAddress} wlanStaTxPktsAt1Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets transmitted by the station at 1 Mbps rate. wlanStaTxBytesAt1Mbps Syntax Counter32 Max-Access read-only Status current Description The number of octets transmitted by the station at 1 Mbps rate.
wlanStaTxPktsAt5Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets transmitted by the station at 5 Mbps rate. wlanStaTxBytesAt5Mbps Syntax Counter32 Max-Access read-only Status current Description The number of octets transmitted by the station at 5 Mbps rate. wlanStaTxPktsAt11Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets transmitted by the station at 11 Mbps rate.
Max-Access read-only Status current Description The number of octets transmitted by the station at 6 Mbps rate. Dell PowerConnect ArubaOS 5.
wlanStaTxPktsAt12Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets transmitted by the station at 12 Mbps rate. wlanStaTxBytesAt12Mbps Syntax Counter32 Max-Access read-only Status current Description The number of octets transmitted by the station at 12 Mbps rate. wlanStaTxPktsAt18Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets transmitted by the station at 18 Mbps rate.
Max-Access read-only Status current Description The number of octets transmitted by the station at 24 Mbps rate. Dell PowerConnect ArubaOS 5.
wlanStaTxPktsAt36Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets transmitted by the station at 36 Mbps rate. wlanStaTxBytesAt36Mbps Syntax Counter32 Max-Access read-only Status current Description The number of octets transmitted by the station at 36 Mbps rate. wlanStaTxPktsAt48Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets transmitted by the station at 48 Mbps rate.
Max-Access read-only Status current Description The number of octets transmitted by the station at 54 Mbps rate. Dell PowerConnect ArubaOS 5.
wlanStaRxPktsAt1Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets received by the station at 1 Mbps rate. wlanStaRxBytesAt1Mbps Syntax Counter32 Max-Access read-only Status current Description The number of octets received by the station at 1 Mbps rate. wlanStaRxPktsAt2Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets received by the station at 2 Mbps rate.
Max-Access read-only Status current Description The number of octets received by the station at 5 Mbps rate. Dell PowerConnect ArubaOS 5.
wlanStaRxPktsAt11Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets received by the station at 11 Mbps rate. wlanStaRxBytesAt11Mbps Syntax Counter32 Max-Access read-only Status current Description The number of octets received by the station at 11 Mbps rate. wlanStaRxPktsAt6Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets received by the station at 6 Mbps rate.
Max-Access read-only Status current Description The number of octets received by the station at 12 Mbps rate. Dell PowerConnect ArubaOS 5.
wlanStaRxPktsAt18Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets received by the station at 18 Mbps rate. wlanStaRxBytesAt18Mbps Syntax Counter32 Max-Access read-only Status current Description The number of octets received by the station at 18 Mbps rate. wlanStaRxPktsAt24Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets received by the station at 24 Mbps rate.
Max-Access read-only Status current Description The number of octets received by the station at 36 Mpbs rate. Dell PowerConnect ArubaOS 5.
wlanStaRxPktsAt48Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets received by the station at 48 Mbps rate. wlanStaRxBytesAt48Mbps Syntax Counter32 Max-Access read-only Status current Description The number of octets received by the station at 48 Mbps rate. wlanStaRxPktsAt54Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets received by the station at 54 Mbps rate.
Max-Access read-only Status current Description The number of octets transmitted by the station at 9 Mbps rate. wlanStaRxPktsAt9Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets received by the station at 9 Mbps rate. wlanStaRxBytesAt9Mbps Syntax Counter32 Max-Access read-only Status current Description The number of octets received by the station at 9 Mbps rate.
wlsxWlanStaDATypeStatsEntry Max-Access not-accessible Status current Description User entry Index {wlanStaPhyAddress} wlanStaTxDABroadcastPkts Syntax Counter32 Max-Access read-only Status current Description The number of broadcast packets transmitted by this station. wlanStaTxDABroadcastBytes Syntax Counter32 Max-Access read-only Status current Description The number of broadcast bytes transmitted by this station.
Max-Access read-only Status current Description The total of unicast packets transmitted by this station. wlanStaTxDAUnicastBytes Syntax Counter32 Max-Access read-only Status current Description The total of unicast bytes transmitted by this station. wlsxWlanStaFrameTypeStatsTable The objects of the wlsx WLAN Station Frame Type table provide information on the packet and byte counts per station. The information is sorted by frame type.
wlsxWlanStaFrameTypeStatsEntry Syntax wlsxWlanStaFrameTypeStatsEntry Max-Access not-accessible Status current Description User entry Index {wlanStaPhyAddress} wlanStaTxMgmtPkts Syntax Counter32 Max-Access read-only Status current Description The transmitted management packets from a station. wlanStaTxMgmtBytes Syntax Counter32 Max-Access read-only Status current Description The transmitted management bytes from a station.
wlanStaTxDataPkts Syntax Counter32 Max-Access read-only Status current Description The transmitted data packets from a station. wlanStaTxDataBytes Syntax Counter32 Max-Access read-only Status current Description The transmitted data bytes observed on this channel. wlanStaRxMgmtPkts Syntax Counter32 Max-Access read-only Status current Description The number of received management packets at a station.
Max-Access read-only Status current Description The number of received control bytes at a station. wlanStaRxDataPkts Syntax Counter32 Max-Access read-only Status current Description The number of received data packets at a station. wlanStaRxDataBytes Syntax Counter32 Max-Access read-only Status current Description The number of received data bytes at a station.
wlsxWlanStaPktSizeStatsEntry Syntax wlsxWlanStaPktSizeStatsEntry Max-Access not-accessible Status current Description User entry. Index {wlanStaPhyAddress} wlanStaTxPkts63Bytes Syntax Counter32 Max-Access read-only Status current Description The number of packets transmitted by the station that were less than 64 bytes long.
wlanStaTxPkts512To1023 Syntax Counter32 Max-Access read-only Status current Description The number of packets transmitted by the station that were between 512 and 1023 bytes long. wlanStaTxPkts1024To1518 Syntax Counter32 Max-Access read-only Status current Description The number of packets transmitted by the station that were between 1024 and 1518 bytes long.
wlanStaRxPkts256To511 Syntax Counter32 Max-Access read-only Status current Description The number of packets received by the station that were between 256 and 511 bytes long. wlanStaRxPkts512To1023 Syntax Counter32 Max-Access read-only Status current Description The number of packets received by the station that were between 512 and 1023 bytes long.
| WLAN Dell PowerConnect ArubaOS 5.
Chapter 19 SNMP MIBs Reference This section provides lists of the SNMP MIB OIDs that are related to ArubaOS. The first table (Table 125) defines the sysObjectIds for Dell products. Table 125 SNMP OIDs returned as sysObjectID for Dell Networks products SNMP MIB OID Dell .1.3.6.1.4.1.674 PowerConnect products .1.3.6.1.4.1.674.10895 Dell PowerConnect W-650 Controller .1.3.6.1.4.1.674.10895.5001 Dell PowerConnect W-651 Controller .1.3.6.1.4.1.674.10895.5002 Dell PowerConnect W-3200 Controller .1.3.
Table 126 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID switch .1.3.6.1.4.1.14823.2.2 wlsxEnterpriseMibModules .1.3.6.1.4.1.14823.2.2.1 wlsxSwitchMIB .1.3.6.1.4.1.14823.2.2.1.1 wlsxSystemXGroup .1.3.6.1.4.1.14823.2.2.1.1.1 wlsxHostname .1.3.6.1.4.1.14823.2.2.1.1.1.1 wlsxModelName .1.3.6.1.4.1.14823.2.2.1.1.1.2 wlsxSwitchIp .1.3.6.1.4.1.14823.2.2.1.1.1.3 wlsxSwitchRole .1.3.6.1.4.1.14823.2.2.1.1.1.4 wlsxSwitchMasterIp .1.3.6.1.4.1.14823.2.2.1.1.1.
Table 126 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlsxSysXMemoryTable .1.3.6.1.4.1.14823.2.2.1.1.1.11 wlsxSysXMemoryEntry .1.3.6.1.4.1.14823.2.2.1.1.1.11.1 sysXMemoryIndex .1.3.6.1.4.1.14823.2.2.1.1.1.11.1.1 sysXMemorySize .1.3.6.1.4.1.14823.2.2.1.1.1.11.1.2 sysXMemoryUsed .1.3.6.1.4.1.14823.2.2.1.1.1.11.1.3 sysXMemoryFree .1.3.6.1.4.1.14823.2.2.1.1.1.11.1.4 wlsxSwitchLicenseSerialNumber .1.3.6.1.4.1.14823.2.2.1.1.1.12 wlsxUserInfoGroup .1.3.6.1.4.1.14823.2.2.1.
Table 126 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlsxSwitchStationStatsTable .1.3.6.1.4.1.14823.2.2.1.1.2.3 wlsxSwitchStationStatsEntry .1.3.6.1.4.1.14823.2.2.1.1.2.3.1 staTxPackets .1.3.6.1.4.1.14823.2.2.1.1.2.3.1.1 staTxBytes .1.3.6.1.4.1.14823.2.2.1.1.2.3.1.2 staRxPackets .1.3.6.1.4.1.14823.2.2.1.1.2.3.1.3 staRxBytes .1.3.6.1.4.1.14823.2.2.1.1.2.3.1.4 staBwRate .1.3.6.1.4.1.14823.2.2.1.1.2.3.1.5 staFrameRetryRate .1.3.6.1.4.1.14823.2.2.1.1.2.3.1.
Table 126 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlsxSwitchGlobalAPEntry .1.3.6.1.4.1.14823.2.2.1.1.3.4.1 globalAPLocation .1.3.6.1.4.1.14823.2.2.1.1.3.4.1.1 globalAPAddress .1.3.6.1.4.1.14823.2.2.1.1.3.4.1.2 globalAPLocalSwitch .1.3.6.1.4.1.14823.2.2.1.1.3.4.1.3 globalAPdot11aPhyAddr .1.3.6.1.4.1.14823.2.2.1.1.3.4.1.4 globalAPdot11bPhyAddr .1.3.6.1.4.1.14823.2.2.1.1.3.4.1.5 globalAPState .1.3.6.1.4.1.14823.2.2.1.1.3.4.1.6 globalAPdot11gPhyAddr .1.3.6.1.4.1.
Table 126 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlsxVoltageValue .1.3.6.1.4.1.14823.2.2.1.1.100.100.7 wlsxTemperatureValue .1.3.6.1.4.1.14823.2.2.1.1.100.100.8 wlsxProcessName .1.3.6.1.4.1.14823.2.2.1.1.100.100.9 wlsxStationMacAddress .1.3.6.1.4.1.14823.2.2.1.1.100.100.10 wlsxStationBlackListReason .1.3.6.1.4.1.14823.2.2.1.1.100.100.11 wlsxSpoofedIpAddress .1.3.6.1.4.1.14823.2.2.1.1.100.100.12 wlsxSpoofedOldPhyAddress .1.3.6.1.4.1.14823.2.2.1.1.100.100.
Table 126 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlsxPowerSupplyFailure .1.3.6.1.4.1.14823.2.2.1.1.100.1014 wlsxFanFailure .1.3.6.1.4.1.14823.2.2.1.1.100.1015 wlsxOutOfRangeVoltage .1.3.6.1.4.1.14823.2.2.1.1.100.1016 wlsxOutOfRangeTemperature .1.3.6.1.4.1.14823.2.2.1.1.100.1017 wlsxLCInserted .1.3.6.1.4.1.14823.2.2.1.1.100.1018 wlsxSCInserted .1.3.6.1.4.1.14823.2.2.1.1.100.1019 wlsxGBICInserted .1.3.6.1.4.1.14823.2.2.1.1.100.1020 wlsxProcessDied .1.3.6.1.4.1.
Table 126 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlsxSysExtSwitchRole .1.3.6.1.4.1.14823.2.2.1.2.1.4 wlsxSysExtSwitchMasterIp .1.3.6.1.4.1.14823.2.2.1.2.1.5 wlsxSysExtSwitchDate .1.3.6.1.4.1.14823.2.2.1.2.1.6 wlsxSysExtSwitchBaseMacaddress .1.3.6.1.4.1.14823.2.2.1.2.1.7 wlsxSysExtFanTrayAssemblyNumber .1.3.6.1.4.1.14823.2.2.1.2.1.8 wlsxSysExtFanTraySerialNumber .1.3.6.1.4.1.14823.2.2.1.2.1.9 wlsxSysExtInternalTemparature .1.3.6.1.4.1.14823.2.2.1.2.1.
Table 126 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID sysExtCardSerialNo .1.3.6.1.4.1.14823.2.2.1.2.1.16.1.6 sysExtCardAssemblyNo .1.3.6.1.4.1.14823.2.2.1.2.1.16.1.7 sysExtCardManufacturingDate .1.3.6.1.4.1.14823.2.2.1.2.1.16.1.8 sysExtCardHwRevision .1.3.6.1.4.1.14823.2.2.1.2.1.16.1.9 sysExtCardFpgaRevision .1.3.6.1.4.1.14823.2.2.1.2.1.16.1.10 sysExtCardSwitchChip .1.3.6.1.4.1.14823.2.2.1.2.1.16.1.11 sysExtCardStatus .1.3.6.1.4.1.14823.2.2.1.2.1.16.1.
Table 126 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlsxSysExtMMSConfigID .1.3.6.1.4.1.14823.2.2.1.2.1.22 wlsxSysExtControllerConfigID .1.3.6.1.4.1.14823.2.2.1.2.1.23 wlsxSysExtIsMMSConfigUpdateEnabled .1.3.6.1.4.1.14823.2.2.1.2.1.24 wlsxSysExtSwitchLastReload .1.3.6.1.4.1.14823.2.2.1.2.1.25 wlsxSysExtLastStatsReset .1.3.6.1.4.1.14823.2.2.1.2.1.26 wlsxSystemExtTableGenNumberGroup .1.3.6.1.4.1.14823.2.2.1.2.2 wlsxSysExtUserTableGenNumber .1.3.6.1.4.1.14823.2.2.1.2.2.
Table 126 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID ifExtIngressACLName .1.3.6.1.4.1.14823.2.2.1.3.1.1.1.14 ifExtEgressACLName .1.3.6.1.4.1.14823.2.2.1.3.1.1.1.15 ifExtSessionACLName .1.3.6.1.4.1.14823.2.2.1.3.1.1.1.16 ifExtXsecVlan .1.3.6.1.4.1.14823.2.2.1.3.1.1.1.17 ifExtIsMonitoring .1.3.6.1.4.1.14823.2.2.1.3.1.1.1.18 ifExtIsMux .1.3.6.1.4.1.14823.2.2.1.3.1.1.1.19 ifExtUserSlotNumber .1.3.6.1.4.1.14823.2.2.1.3.1.1.1.20 ifExtUserPortNumber .1.3.6.1.4.1.14823.2.2.
Table 126 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID ifExtVlanInterfaceIpRouting .1.3.6.1.4.1.14823.2.2.1.3.1.4.1.10 ifExtVlanInterfaceIpNatInside .1.3.6.1.4.1.14823.2.2.1.3.1.4.1.11 ifExtVlanInterfaceIpIgmpSnooping .1.3.6.1.4.1.14823.2.2.1.3.1.4.1.12 wlsxUserMIB .1.3.6.1.4.1.14823.2.2.1.4 wlsxUserAllInfoGroup .1.3.6.1.4.1.14823.2.2.1.4.1 wlsxTotalNumOfUsers .1.3.6.1.4.1.14823.2.2.1.4.1.1 wlsxUserTable .1.3.6.1.4.1.14823.2.2.1.4.1.2 wlsxUserEntry .1.3.6.1.4.1.14823.
Table 126 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID nUserMobilityDomainName .1.3.6.1.4.1.14823.2.2.1.4.1.2.1.27 nUserUPBWContractName .1.3.6.1.4.1.14823.2.2.1.4.1.2.1.28 nUserUPBWContractUsage .1.3.6.1.4.1.14823.2.2.1.4.1.2.1.29 nUserUPBWContractId .1.3.6.1.4.1.14823.2.2.1.4.1.2.1.30 nUserDNBWContractName .1.3.6.1.4.1.14823.2.2.1.4.1.2.1.31 nUserDNBWContractUsage .1.3.6.1.4.1.14823.2.2.1.4.1.2.1.32 nUserDNBWContractId .1.3.6.1.4.1.14823.2.2.1.4.1.2.1.
Table 126 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlanAPGroupName .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.4 wlanAPModel .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.5 wlanAPSerialNumber .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.6 wlanAPdot11aAntennaGain .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.7 wlanAPdot11gAntennaGain .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.8 wlanAPNumRadios .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.9 wlanAPEnet1Mode .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.10 wlanAPIpsecMode .1.3.6.1.4.1.
Table 126 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlanAPRadioNumActiveBSSIDs .1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.9 wlanAPRadioNumMonitoredBSSIDs .1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.10 wlanAPRadioBearing .1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.11 wlanAPRadioTiltAngle .1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.12 wlanAPRadioHTMode .1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.13 wlanAPRadioHTExtChannel .1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.14 wlanAPRadioHTChannel .1.3.6.1.4.1.14823.2.2.1.5.2.1.
Table 126 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlsxWlanESSIDVlanPoolTable .1.3.6.1.4.1.14823.2.2.1.5.2.1.9 wlsxWlanESSIDVlanPoolEntry .1.3.6.1.4.1.14823.2.2.1.5.2.1.9.1 wlanESSIDVlanId .1.3.6.1.4.1.14823.2.2.1.5.2.1.9.1.1 wlanESSIDVlanPoolStatus .1.3.6.1.4.1.14823.2.2.1.5.2.1.9.1.2 wlsxWlanStationInfoGroup .1.3.6.1.4.1.14823.2.2.1.5.2.2 wlsxWlanStationTable .1.3.6.1.4.1.14823.2.2.1.5.2.2.1 wlsxWlanStationEntry .1.3.6.1.4.1.14823.2.2.1.5.2.2.1.
Table 126 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlsxWlanAPStatsTable .1.3.6.1.4.1.14823.2.2.1.5.3.1.1 wlsxWlanAPStatsEntry .1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1 wlanAPCurrentChannel .1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.1 wlanAPNumClients .1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.2 wlanAPTxPkts .1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.3 wlanAPTxBytes .1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.4 wlanAPRxPkts .1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.5 wlanAPRxBytes .1.3.6.1.4.1.14823.2.2.1.5.3.
Table 126 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlanAPStatsTotBytesAt5Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.6 wlanAPStatsTotPktsAt11Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.7 wlanAPStatsTotBytesAt11Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.8 wlanAPStatsTotPktsAt6Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.9 wlanAPStatsTotBytesAt6Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.10 wlanAPStatsTotPktsAt12Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.11 wlanAPStatsTotBytesAt12Mbps .1.3.
Table 126 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlanAPStatsTotBytesAtHT30Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.40 wlanAPStatsTotPktsAtHT39Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.41 wlanAPStatsTotBytesAtHT39Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.42 wlanAPStatsTotPktsAtHT40dot5Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.43 wlanAPStatsTotBytesAtHT40dot5Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.44 wlanAPStatsTotPktsAtHT45Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.
Table 126 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlanAPStatsTotBytesAtHT130Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.74 wlanAPStatsTotPktsAtHT135Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.75 wlanAPStatsTotBytesAtHT135Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.76 wlanAPStatsTotPktsAtHT150Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.77 wlanAPStatsTotBytesAtHT150Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.78 wlanAPStatsTotPktsAtHT162Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.
Table 126 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlanAPStatsTotDataBytes .1.3.6.1.4.1.14823.2.2.1.5.3.1.4.1.6 wlsxWlanAPPktSizeStatsTable .1.3.6.1.4.1.14823.2.2.1.5.3.1.5 wlsxWlanAPPktSizeStatsEntry .1.3.6.1.4.1.14823.2.2.1.5.3.1.5.1 wlanAPStatsPkts63Bytes .1.3.6.1.4.1.14823.2.2.1.5.3.1.5.1.1 wlanAPStatsPkts64To127 .1.3.6.1.4.1.14823.2.2.1.5.3.1.5.1.2 wlanAPStatsPkts128To255 .1.3.6.1.4.1.14823.2.2.1.5.3.1.5.1.3 wlanAPStatsPkts256To511 .1.3.6.1.4.1.14823.2.2.1.5.3.
Table 126 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlanStaChannelNum .1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.1 wlanStaTxPkts .1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.2 wlanStaTxBytes .1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.3 wlanStaRxPkts .1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.4 wlanStaRxBytes .1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.5 wlanStaTxBCastPkts .1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.6 wlanStaRxBCastBytes .1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.7 wlanStaTxMCastPkts .1.3.6.1.4.1.14823.2.2.
Table 126 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlanStaTxPktsAt6Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.9 wlanStaTxBytesAt6Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.10 wlanStaTxPktsAt12Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.11 wlanStaTxBytesAt12Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.12 wlanStaTxPktsAt18Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.13 wlanStaTxBytesAt18Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.14 wlanStaTxPktsAt24Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.
Table 126 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlanStaRxPktsAt54Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.43 wlanStaRxBytesAt54Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.44 wlanStaTxPktsAt9Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.45 wlanStaTxBytesAt9Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.46 wlanStaRxPktsAt9Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.47 wlanStaRxBytesAt9Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.48 wlsxWlanStaDATypeStatsTable .1.3.6.1.4.1.14823.2.2.1.5.3.2.
Table 126 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlanStaTxPkts512To1023 .1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.5 wlanStaTxPkts1024To1518 .1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.6 wlanStaRxPkts63Bytes .1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.7 wlanStaRxPkts64To127 .1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.8 wlanStaRxPkts128To255 .1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.9 wlanStaRxPkts256To511 .1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.10 wlanStaRxPkts512To1023 .1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.
Table 126 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID monAPRSSI .1.3.6.1.4.1.14823.2.2.1.6.6.1.1.1.22 monAPFrameReceiveErrorRate .1.3.6.1.4.1.14823.2.2.1.6.6.1.1.1.23 wlsxMonAPRateStatsTable .1.3.6.1.4.1.14823.2.2.1.6.6.1.2 wlsxMonAPRateStatsEntry .1.3.6.1.4.1.14823.2.2.1.6.6.1.2.1 monAPStatsTotPktsAt1Mbps .1.3.6.1.4.1.14823.2.2.1.6.6.1.2.1.1 monAPStatsTotBytesAt1Mbps .1.3.6.1.4.1.14823.2.2.1.6.6.1.2.1.2 monAPStatsTotPktsAt2Mbps .1.3.6.1.4.1.14823.2.2.1.6.6.1.2.1.
Table 126 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID monAPStatsTotDAUnicastPkts .1.3.6.1.4.1.14823.2.2.1.6.6.1.3.1.5 monAPStatsTotDAUnicastBytes .1.3.6.1.4.1.14823.2.2.1.6.6.1.3.1.6 wlsxMonAPFrameTypeStatsTable .1.3.6.1.4.1.14823.2.2.1.6.6.1.4 wlsxMonAPFrameTypeStatsEntry .1.3.6.1.4.1.14823.2.2.1.6.6.1.4.1 monAPStatsTotMgmtPkts .1.3.6.1.4.1.14823.2.2.1.6.6.1.4.1.1 monAPStatsTotMgmtBytes .1.3.6.1.4.1.14823.2.2.1.6.6.1.4.1.2 monAPStatsTotCtrlPkts .1.3.6.1.4.1.14823.2.2.
Table 126 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID monStaTxMCastPkts .1.3.6.1.4.1.14823.2.2.1.6.6.2.1.1.9 monStaTxMCastBytes .1.3.6.1.4.1.14823.2.2.1.6.6.2.1.1.10 monStaDataPkts .1.3.6.1.4.1.14823.2.2.1.6.6.2.1.1.11 monStaCtrlPkts .1.3.6.1.4.1.14823.2.2.1.6.6.2.1.1.12 monStaNumAssocRequests .1.3.6.1.4.1.14823.2.2.1.6.6.2.1.1.13 monStaNumAuthRequests .1.3.6.1.4.1.14823.2.2.1.6.6.2.1.1.14 monStaTxDeauthentications .1.3.6.1.4.1.14823.2.2.1.6.6.2.1.1.
Table 126 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID monStaTxBytesAt18Mbps .1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.14 monStaTxPktsAt24Mbps .1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.15 monStaTxBytesAt24Mbps .1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.16 monStaTxPktsAt36Mbps .1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.17 monStaTxBytesAt36Mbps .1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.18 monStaTxPktsAt48Mbps .1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.19 monStaTxBytesAt48Mbps .1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.
Table 126 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID monStaRxBytesAt9Mbps .1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.48 wlsxMonStaDATypeStatsTable .1.3.6.1.4.1.14823.2.2.1.6.6.2.3 wlsxMonStaDATypeStatsEntry .1.3.6.1.4.1.14823.2.2.1.6.6.2.3.1 monStaTxDABroadcastPkts .1.3.6.1.4.1.14823.2.2.1.6.6.2.3.1.1 monStaTxDABroadcastBytes .1.3.6.1.4.1.14823.2.2.1.6.6.2.3.1.2 monStaTxDAMulticastPkts .1.3.6.1.4.1.14823.2.2.1.6.6.2.3.1.3 monStaTxDAMulticastBytes .1.3.6.1.4.1.14823.2.2.1.6.6.
Table 126 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID monStaRxPkts256To511 .1.3.6.1.4.1.14823.2.2.1.6.6.2.5.1.10 monStaRxPkts512To1023 .1.3.6.1.4.1.14823.2.2.1.6.6.2.5.1.11 monStaRxPkts1024To1518 .1.3.6.1.4.1.14823.2.2.1.6.6.2.5.1.12 wlsxMonEventCountTable .1.3.6.1.4.1.14823.2.2.1.6.6.2.6 wlsxMonEventCountEntry .1.3.6.1.4.1.14823.2.2.1.6.6.2.6.1 monEventID .1.3.6.1.4.1.14823.2.2.1.6.6.2.6.1.1 monEventCount .1.3.6.1.4.1.14823.2.2.1.6.6.2.6.1.
Table 126 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID monStaInfoBSSID .1.3.6.1.4.1.14823.2.2.1.6.7.2.1.1.2 monStaInfoESSID .1.3.6.1.4.1.14823.2.2.1.6.7.2.1.1.3 monStaInfoPhyType .1.3.6.1.4.1.14823.2.2.1.6.7.2.1.1.4 monStaInfoRSSI .1.3.6.1.4.1.14823.2.2.1.6.7.2.1.1.5 monStaInfoClassification .1.3.6.1.4.1.14823.2.2.1.6.7.2.1.1.6 monStaInfoMonitorTime .1.3.6.1.4.1.14823.2.2.1.6.7.2.1.1.7 monStaInfoInactivityTime .1.3.6.1.4.1.14823.2.2.1.6.7.2.1.1.
Table 126 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlsxStaSnrPhyEntry .1.3.6.1.4.1.14823.2.2.1.7.1.4.1 staSnrPhyAverageSignalStrength .1.3.6.1.4.1.14823.2.2.1.7.1.4.1.1 staSnrPhySignalPkts .1.3.6.1.4.1.14823.2.2.1.7.1.4.1.2 staSnrPhyHighestRxSignalStrength .1.3.6.1.4.1.14823.2.2.1.7.1.4.1.3 staSnrPhyLowestRxSignalStrength .1.3.6.1.4.1.14823.2.2.1.7.1.4.1.4 staSnrPhySampleTime .1.3.6.1.4.1.14823.2.2.1.7.1.4.1.5 wlsxAuthMIB .1.3.6.1.4.1.14823.2.2.1.
Table 126 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID ldapInitDone .1.3.6.1.4.1.14823.2.2.1.8.1.5.1.1 ldapAdminBound .1.3.6.1.4.1.14823.2.2.1.8.1.5.1.2 ldapReBindCount .1.3.6.1.4.1.14823.2.2.1.8.1.5.1.3 wlsxAuthenticationInfoGroup .1.3.6.1.4.1.14823.2.2.1.8.2 wlsxAuthenticationGroup .1.3.6.1.4.1.14823.2.2.1.8.3 wlsxMobilityMIB .1.3.6.1.4.1.14823.2.2.1.9 wlsxMobilityConfigGroup .1.3.6.1.4.1.14823.2.2.1.9.1 wlsxMobilityDomainTable .1.3.6.1.4.1.14823.2.2.1.9.1.
Table 126 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID mobilityProxyNoMobility .1.3.6.1.4.1.14823.2.2.1.9.2.6 mobilityProxyClientIPChg .1.3.6.1.4.1.14823.2.2.1.9.2.7 mobilityProxyClientEssidChg .1.3.6.1.4.1.14823.2.2.1.9.2.8 wlsxMobilityProxyDHCPStatsGroup .1.3.6.1.4.1.14823.2.2.1.9.3 mobilityProxyDhcpBootpRx .1.3.6.1.4.1.14823.2.2.1.9.3.1 mobilityProxyDhcpPktProc .1.3.6.1.4.1.14823.2.2.1.9.3.2 mobilityProxyDhcpPktFwd .1.3.6.1.4.1.14823.2.2.1.9.3.
Table 126 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID mobilityFAHAauthFAIL .1.3.6.1.4.1.14823.2.2.1.9.5.6 mobilityFABadID .1.3.6.1.4.1.14823.2.2.1.9.5.7 mobilityFAMalform .1.3.6.1.4.1.14823.2.2.1.9.5.8 wlsxMobilityHAFARevocationStatsGroup .1.3.6.1.4.1.14823.2.2.1.9.6 mobilitySentRRVRQ .1.3.6.1.4.1.14823.2.2.1.9.6.1 mobilityRcvRRVAck .1.3.6.1.4.1.14823.2.2.1.9.6.2 mobilityRcvRRV .1.3.6.1.4.1.14823.2.2.1.9.6.3 mobilitySentRRVAck .1.3.6.1.4.1.14823.2.2.1.9.6.
Table 126 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlsxVoiceMIB .1.3.6.1.4.1.14823.2.2.1.12 wlsxVoiceStatsGroup .1.3.6.1.4.1.14823.2.2.1.12.1 wlsxVoiceCdrInfoGroup .1.3.6.1.4.1.14823.2.2.1.12.1.1 wlsxVoiceCdrTotal .1.3.6.1.4.1.14823.2.2.1.12.1.1.1 wlsxVoiceCdrTable .1.3.6.1.4.1.14823.2.2.1.12.1.1.2 wlsxVoiceCdrEntry .1.3.6.1.4.1.14823.2.2.1.12.1.1.2.1 voiceCdrId .1.3.6.1.4.1.14823.2.2.1.12.1.1.2.1.1 voiceCdrIp .1.3.6.1.4.1.14823.2.2.1.12.1.1.2.1.2 voiceCdrMac .
Table 126 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID voiceCallCtrsRecvd .1.3.6.1.4.1.14823.2.2.1.12.1.2.7 voiceCallCtrsActive .1.3.6.1.4.1.14823.2.2.1.12.1.2.8 voiceCallCtrsNotFnd .1.3.6.1.4.1.14823.2.2.1.12.1.2.9 voiceCallCtrsBusy .1.3.6.1.4.1.14823.2.2.1.12.1.2.10 voiceCallCtrsSvc .1.3.6.1.4.1.14823.2.2.1.12.1.2.11 voiceCallCtrsReqTerm .1.3.6.1.4.1.14823.2.2.1.12.1.2.12 voiceCallCtrsDecline .1.3.6.1.4.1.14823.2.2.1.12.1.2.13 voiceCallCtrsUnauth .1.3.6.1.4.1.14823.
Table 126 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID voiceAPBssidExtraCallDisc .1.3.6.1.4.1.14823.2.2.1.12.1.4.2.1.10 voiceAPBssidKickedOff .1.3.6.1.4.1.14823.2.2.1.12.1.4.2.1.11 voiceAPBssidTspecDenied .1.3.6.1.4.1.14823.2.2.1.12.1.4.2.1.12 voiceAPBssidCacFlag .1.3.6.1.4.1.14823.2.2.1.12.1.4.2.1.13 voiceAPBssidTotVoiceClients .1.3.6.1.4.1.14823.2.2.1.12.1.4.2.1.14 voiceAPBssidCallsSCCP .1.3.6.1.4.1.14823.2.2.1.12.1.4.2.1.15 voiceAPBssidCallsSIP .1.3.6.1.4.1.14823.2.
Table 126 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlsxMeshTopologyTable .1.3.6.1.4.1.14823.2.2.1.13.1.3.2 wlsxMeshTopologyEntry .1.3.6.1.4.1.14823.2.2.1.13.1.3.2.1 wlanAPMeshRole .1.3.6.1.4.1.14823.2.2.1.13.1.3.2.1.1 wlsxMeshTopologyParen .1.3.6.1.4.1.14823.2.2.1.13.1.3.2.1.2 wlsxMeshTopologyPathCost .1.3.6.1.4.1.14823.2.2.1.13.1.3.2.1.3 wlsxMeshTopologyNodeCost .1.3.6.1.4.1.14823.2.2.1.13.1.3.2.1.4 wlsxMeshTopologyLinkCost .1.3.6.1.4.1.14823.2.2.1.13.1.3.2.1.
Table 126 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID nUser6IsProxyArpEnabled .1.3.6.1.4.1.14823.2.2.1.14.2.1.21 nUser6CurrentVlan .1.3.6.1.4.1.14823.2.2.1.14.2.1.22 nUser6IsWired .1.3.6.1.4.1.14823.2.2.1.14.2.1.23 nUser6ConnectedSlot .1.3.6.1.4.1.14823.2.2.1.14.2.1.24 nUser6ConnectedPort .1.3.6.1.4.1.14823.2.2.1.14.2.1.25 nUser6PhyType .1.3.6.1.4.1.14823.2.2.1.14.2.1.26 nUser6MobilityDomainName .1.3.6.1.4.1.14823.2.2.1.14.2.1.27 nUser6UPBWContractName .1.3.6.1.4.1.
Table 126 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlsxTrapTransmitterMac .1.3.6.1.4.1.14823.2.3.1.11.1.1.11 wlsxTrapReceiverMac .1.3.6.1.4.1.14823.2.3.1.11.1.1.12 wlsxTrapSnr .1.3.6.1.4.1.14823.2.3.1.11.1.1.13 wlsxTrapSignatureName .1.3.6.1.4.1.14823.2.3.1.11.1.1.14 wlsxTrapFrameType .1.3.6.1.4.1.14823.2.3.1.11.1.1.15 wlsxTrapAddressType .1.3.6.1.4.1.14823.2.3.1.11.1.1.16 wlsxTrapAPLocation .1.3.6.1.4.1.14823.2.3.1.11.1.1.17 wlsxTrapAPChannel .1.3.6.1.4.1.14823.
Table 126 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlsxTrapESIServerGrpName .1.3.6.1.4.1.14823.2.3.1.11.1.1.45 wlsxTrapESIServerName .1.3.6.1.4.1.14823.2.3.1.11.1.1.46 wlsxTrapESIServerIpAddress .1.3.6.1.4.1.14823.2.3.1.11.1.1.47 wlsxTrapLicenseDaysRemaining .1.3.6.1.4.1.14823.2.3.1.11.1.1.48 wlsxTrapSwitchIp .1.3.6.1.4.1.14823.2.3.1.11.1.1.49 wlsxTrapSwitchRole .1.3.6.1.4.1.14823.2.3.1.11.1.1.50 wlsxTrapUserIpAddress .1.3.6.1.4.1.14823.2.3.1.11.1.1.
Table 126 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlsxTrapTunnelDownReason .1.3.6.1.4.1.14823.2.3.1.11.1.1.79 wlsxTrapApSerialNumber 1.3.6.1.4.1.14823.2.3.1.11.1.1.80 wlsxTraptimeStr 1.3.6.1.4.1.14823.2.3.1.11.1.1.81 wlsxTrapDefinitionsGroup .1.3.6.1.4.1.14823.2.3.1.11.1.2 wlsxVlanLinkUp .1.3.6.1.4.1.14823.2.3.1.11.1.2.1000 wlsxVlanLinkDown .1.3.6.1.4.1.14823.2.3.1.11.1.2.1001 wlsxSignatureMatch .1.3.6.1.4.1.14823.2.3.1.11.1.2.1002 wlsxNodeRateAnomaly .1.3.6.1.4.
Table 126 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlsxNSCInserted .1.3.6.1.4.1.14823.2.3.1.11.1.2.1030 wlsxNGBICInserted .1.3.6.1.4.1.14823.2.3.1.11.1.2.1031 wlsxNProcessDied .1.3.6.1.4.1.14823.2.3.1.11.1.2.1032 wlsxNProcessExceedsMemoryLimits (deprecated) .1.3.6.1.4.1.14823.2.3.1.11.1.2.1033 wlsxNLowOnFlashSpace .1.3.6.1.4.1.14823.2.3.1.11.1.2.1034 wlsxNLowMemory .1.3.6.1.4.1.14823.2.3.1.11.1.2.1035 wlsxNFanTrayRemoved .1.3.6.1.4.1.14823.2.3.1.11.1.2.
Table 126 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlsxAdhocNetworkRemoved .1.3.6.1.4.1.14823.2.3.1.11.1.2.1064 wlsxStaPolicyViolation .1.3.6.1.4.1.14823.2.3.1.11.1.2.1065 wlsxRepeatWEPIVViolation .1.3.6.1.4.1.14823.2.3.1.11.1.2.1066 wlsxWeakWEPIVViolation .1.3.6.1.4.1.14823.2.3.1.11.1.2.1067 wlsxChannelInterferenceDetected .1.3.6.1.4.1.14823.2.3.1.11.1.2.1068 wlsxChannelInterferenceCleared .1.3.6.1.4.1.14823.2.3.1.11.1.2.1069 wlsxAPInterferenceDetected .1.3.6.1.4.
Table 126 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlsxInvalidMacOUIAP .1.3.6.1.4.1.14823.2.3.1.11.1.2.1098 wlsxInvalidMacOUISta .1.3.6.1.4.1.14823.2.3.1.11.1.2.1099 wlsxWEPMisconfiguration .1.3.6.1.4.1.14823.2.3.1.11.1.2.1100 wlsxStaRepeatWEPIVViolation .1.3.6.1.4.1.14823.2.3.1.11.1.2.1101 wlsxStaWeakWEPIVViolation .1.3.6.1.4.1.14823.2.3.1.11.1.2.1102 wlsxStaAssociatedToUnsecureAP .1.3.6.1.4.1.14823.2.3.1.11.1.2.1103 wlsxStaUnAssociatedFromUnsecureAP .1.3.6.1.4.1.
Table 126 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlsxMonAPEntryChanged .1.3.6.1.4.1.14823.2.3.1.11.1.2.1132 wlsxMonStationEntryChanged .1.3.6.1.4.1.14823.2.3.1.11.1.2.1133 wlsxSignAPNetstumbler .1.3.6.1.4.1.14823.2.3.1.11.1.2.1134 wlsxSignStaNetstumbler .1.3.6.1.4.1.14823.2.3.1.11.1.2.1135 wlsxSignAPAsleap .1.3.6.1.4.1.14823.2.3.1.11.1.2.1136 wlsxSignStaAsleap .1.3.6.1.4.1.14823.2.3.1.11.1.2.1137 wlsxSignAPAirjack .1.3.6.1.4.1.14823.2.3.1.11.1.2.
Index A access point ............................................................... 35 agent ....................................................................... 137 air monitor ................................................................ 35 Alarm analog ................................................................. 21 discrete ............................................................... 21 ping ..................................................................... 21 analog alarm inputs ......
sysExtSwitchSerNo .................................... 313 sysExtSwitchStatus.................................... 313 sysExtSwitchSWVersion ........................... 312 sysXMemoryFree ....................................... 237 sysXMemorySize ........................................ 237 sysXMemoryUsed ...................................... 237 sysXProcessorDescr.................................... 233 sysXProcessorID ........................................ 233 sysXProcessorLoad .........................
wlanAPStatsTotDABroadcastPkts ............ 584 wlanAPStatsTotDAMulticastBytes ........... 584 wlanAPStatsTotDAMulticastPkts ............ 584 wlanAPStatsTotDataBytes ........................ 587 wlanAPStatsTotDataPkts .......................... 587 wlanAPStatsTotDAUnicastBytes .............. 585 wlanAPStatsTotDAUnicastPkts ................ 585 wlanAPStatsTotMgmtBytes ...................... 586 wlanAPStatsTotMgmtPkts ........................ 586 wlanAPStatsTotPktsAt11Mbps .................
wlsxWlanStationTable .............................. 527 wlsxWlanTotalNumAccessPoints ............. 496 ArubaOS 2.5 wlanAPFrameReceiveErrorRate ................ 541 wlanAPRxDataBytes .................................. 541 wlanAPRxDataPkts .................................... 541 wlanAPTxDataBytes .................................. 541 wlanAPTxDataPkts.................................... 541 wlsxSysExtControllerConfigID ................ 295 wlsxSysExtIsMMSConfigUpdateEnabled 295 wlsxSysExtMMSConfigID ........
wlsxInterferingApDetected ....................... 409 wlsxLicenseEntryChanged ........................ 415 wlsxMonAPEntryChanged ........................ 415 wlsxMonStationEntryChanged................. 416 wlsxNAccessPointIsDown ......................... 391 wlsxNAccessPointIsUp .............................. 390 wlsxNAuthMaxAclEntries ......................... 386 wlsxNAuthMaxBWContracts ................... 386 wlsxNAuthMaxUserEntries ....................... 384 wlsxNAuthServerIsDown ......................
nUserUPBWContractName ..................... 439 nUserUPBWContractUsage ..................... 439 oiceCdrHandovers ..................................... 475 voiceAPBssid100Sent ................................ 489 voiceAPBssid503Sent ................................ 489 voiceAPBssidCacFlag ................................ 491 voiceAPBssidCallsNoe ............................... 492 voiceAPBssidCallsSCCP ........................... 491 voiceAPBssidCallsSIP ................................
monStaInfoHTMode................................. 210 monStaRxHTBytes .................................... 213 monStaRxHTPkts...................................... 213 monStaTxHTBytes .................................... 212 monStaTxHTPkts ..................................... 212 nUser6ApBSSID ........................................ 454 nUser6ApLocation..................................... 454 nUser6AssignedVLAN ............................... 456 nUser6AuthenticationMethod ..................
wlanAPStatsTotPktsAtHT243Mbps ......... 581 wlanAPStatsTotPktsAtHT26Mbps ........... 561 wlanAPStatsTotPktsAtHT270Mbps ......... 581 wlanAPStatsTotPktsAtHT27Mbps ........... 561 wlanAPStatsTotPktsAtHT300Mbps ......... 582 wlanAPStatsTotPktsAtHT30Mbps ........... 561 wlanAPStatsTotPktsAtHT39Mbps ........... 563 wlanAPStatsTotPktsAtHT40dot5Mbps ... 563 wlanAPStatsTotPktsAtHT45Mbps ........... 565 wlanAPStatsTotPktsAtHT52Mbps ........... 565 wlanAPStatsTotPktsAtHT54Mbps ...........
U switch traps ...................................................... 268 types.................................................................... 21 wlsx trap objects group .................................... 344 user access ............................................................... 427 V VLAN ...................................................................... 117 voice status ............................................................. 465 W wlsxMonAPHTRateStatsEntry .....................
| Index Dell PowerConnect ArubaOS 5.
