iDRAC Card Profile 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Document Number: DCIM1043 Document Type: Specification Document Status: Published Document Language: E Date: 2012-03-08 Version: 1.2.
32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 THIS PROFILE IS FOR INFORMATIONAL PURPOSES ONLY, AND MAY CONTAIN TYPOGRAPHICAL ERRORS AND TECHNICAL INACCURACIES. THE CONTENT IS PROVIDED AS IS, WITHOUT EXPRESS OR IMPLIED WARRANTIES OF ANY KIND. ABSENT A SEPARATE AGREEMENT BETWEEN YOU AND DELL™ WITH REGARD TO FEEDBACK TO DELL ON THIS PROFILE SPECIFICATION, YOU AGREE ANY FEEDBACK YOU PROVIDE TO DELL REGARDING THIS PROFILE SPECIFICATION WILL BE OWNED AND CAN BE FREELY USED BY DELL.
67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 CONTENTS 1 2 3 4 5 6 7 Scope .................................................................................................................................................... 7 Normative References........................................................................................................................... 7 Terms and Definitions ..............................................................................
95 Figures 96 97 Figure 1 – iDRAC Card Profile Implementation .......................................................................................... 11 98 Tables 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 Table 1 – Related Profiles ...........................................................................................................................
141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 Table 43 – DCIM_iDRACCardEnumeration Remote Racadm Configuration ............................................. 34 Table 44 – DCIM_iDRACCardInteger Remote Racadm Configuration ...................................................... 35 Table 45 – DCIM_iDRACCardString RAC Remote Hosts .................................
190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 Table 88 – CreateTargetedConfigJob( ) Method: Return Code Values ...................................................... 58 Table 89 – CreateTargetedConfigJob( ) Method: Parameters .................................................................... 58 Table 90 – CreateTargetedConfigJob( ) Method: Standard Messages ...................................................... 59 Table 91 – DeletePendingConfiguration( ) Method: Return Code Values .
iDRAC Card Profile 208 209 1 210 211 212 213 214 The DCIM iDRAC Card Profile describes the properties and interfaces for executing system management tasks related to the management of basic properties of iDRAC card.
240 3 241 For the purposes of this document, the following terms and definitions apply. 242 243 can - Used for statements of possibility and capability, whether material, physical, or causal. 244 245 Terms and Definitions 3.1 3.2 cannot - Used for statements of possibility and capability, whether material, physical, or causal. 3.3 246 247 248 conditional - Indicates requirements to be followed strictly in order to conform to the document when the specified conditions are met.
3.13 272 273 Interop Namespace: root/interop 274 275 Interop Namespace: root/interop is where instrumentation instantiates classes to advertise its capabilities for client discovery. 276 277 3.14 Implementation Namespace: root/dcim 278 279 Implementation Namespace: root/dcim is where instrumentation instantiates classes relevant to executing core management tasks. 280 281 282 3.15 ENUMERATE - Refers to WS-MAN ENUMERATE operation as described in Section 8.2 of DSP0226_V1.1 and Section 9.
303 5 304 Profile Name: iDRAC Card 305 Version: 1.2.0 306 Organization: Dell 307 CIM Schema Version: 2.26 Experimental 308 Dell Schema Version: 1.0.0 309 Interop Namespace: root/interop 310 Implementation Namespace: root/dcim 311 Central Class: DCIM_iDRACCardView 312 Scoping Class: DCIM_ComputerSystem 313 314 The Dell iDRAC Card Profile is a component profile that contains the Dell specific implementation requirements for remote access card view.
318 6 319 320 The Dell iDRAC Card Profile describes the platform’s iDRAC remote access card. Each remote access card’s information is represented by an instance of DCIM_iDRACCardView class. 321 322 323 Figure 1 details typical Dell iDRAC Card Profile implementation for a platform with iDRAC remote access card. For the client to discover the instrumentation’s support of this profile, iDracProfile is instantiated in the Interop Namespace:root/dcim.
329 7 330 This section describes the requirements and guidelines for implementing Dell iDRAC Card Profile. Implementation Description 331 Table 2 – Class Requirements: iDRAC Card Profile Element Name Requirement Description DCIM_iDRACCardView Mandatory The class shall be implemented in the Implementation Namespace: root/dcim. [1] See section 7.1. DCIM_iDRACCardEnumeration Mandatory The class shall be implemented in the Implementation Namespace: root/dcim. [2] See section 7.2.
342 343 344 The instance Resource URI for DCIM_iDRACCardView instance shall be: “http://schemas.dell.com/wbem/wscim/1/cimschema/2/DCIM_iDRACCardView?__cimnamespace=root/dcim+InstanceID=” 345 7.1.2 346 The following table lists the implemented operations on DCIM_iDRACCardView. Operations 347 Table 3 – DCIM_iDRACCardView - Operations Operation Name Get Enumerate Requirements Mandatory Mandatory Required Input Instance URI Class URI 348 349 7.1.
357 358 359 Each DCIM_iDRACCardEnumeration instance is logically associated to a DCIM_iDRACCardView instance, where the DCIM_iDRACCardEnumeration. FQDD property is equal to the FQDD property on the DCIM_iDRACCardView instance. 360 This class shall be instantiated in the Implementation Namespace: root/dcim. 361 7.2.1 362 363 The class Resource URI shall be “http://schemas.dell.
377 Table 6 – Class: DCIM_iDRACCardEnumeration Properties Type Notes Additional Requirements InstanceID String Mandatory The property value shall be formed as follows: “##”. AttributeName String Mandatory The property value shall be from the “AttributeName” column in Tables in section 7.5. AttributeDisplayName String Mandatory The property value shall be from the “AttributeDisplayName” column in Tables in section 7.5.
380 7.3 381 This section describes the implementation for the DCIM_iDRACCardString class. 382 383 384 Each DCIM_iDRACCardString instance is logically associated to a DCIM_iDRACCardView instance, where the DCIM_iDRACCardString. FQDD property is equal to the FQDD property on the DCIM_iDRACCardView instance. 385 This class shall be instantiated in the Implementation Namespace: root/dcim. 386 7.3.1 387 388 The class Resource URI shall be “http://schemas.dell.
402 Table 8 – Class: DCIM_iDRACCardString Properties Type Notes Additional Requirements InstanceID String Mandatory The property value shall be formed as follows: “##”. AttributeName String Mandatory The property value shall be from the “AttributeName” column in Tables in section 7.5. AttributeDisplayName String Mandatory The property value shall be from the “AttributeDisplayName” column in in Tables in section 7.5.
412 The key property shall be the InstanceID. 413 414 415 416 The instance Resource URI for DCIM_iDRACCardInteger instance shall be: “http://schemas.dell.com/wbem/wscim/1/cimschema/2/DCIM_iDRACCardInteger?__cimnamespace=root/dcim+InstanceID=##” 417 7.4.2 418 The following table lists the implemented operations on DCIM_iDRACCardInteger. 419 Operations Table 9 – DCIM_iDRACCardInteger - Operations Operation Name Get Enumerate DCIM_iDRACCardService.
426 Table 10 – Class: DCIM_iDRACCardInteger Properties Type Requirement Additional Requirements InstanceID String Mandatory The property value shall be formed as follows: “##”. AttributeName String Mandatory The property value shall be from the “AttributeName” column in Tables in section 7.5. AttributeDisplayName String Mandatory The property value shall be from the “AttributeDisplayName” column in Tables in section 7.5.
432 433 The GroupID property for the DCIM_iDRACCardEnumeration, DCIM_iDRACCardString, and DCIM_iDRACCardInteger shall be “ActiveDirectory.1”. 434 435 The GroupDisplayName property for the DCIM_iDRACCardEnumeration, DCIM_iDRACCardString, and DCIM_iDRACCardInteger shall be “Active Directory”. 436 437 438 439 440 The following table describes the values for the DCIM_iDRACCardEnumeration of this group. Each column heading corresponds to a property name on the DCIM_iDRACCardEnumeration class.
Attribute Description AttributeName 447 448 449 IsReadOnly Display Order MinLength MaxLength DCLookupDomainName Active Directory Lookup Domain Name FALSE 787 0 254 GCRootDomain Active Directory Root Domain FALSE 786 0 254 The following table describes the values for the DCIM_iDRACCardInteger of this group. Each column heading corresponds to a property name on the DCIM_iDRACCardInteger class. Each row contains the values for the properties listed in the column headings.
465 Table 15 – DCIM_iDRACCardInteger AD Group Configuration AttributeName Privilege AttributeDisplayName IsReadOnly AD Group Privilege FALSE Display Order 803, 813, 823, 833, 843, LowerBound 0 UpperBound 511 466 7.5.3 Email Alert 467 This section describes the attributes for iDRAC’s Email Alert Configuration. 468 469 The GroupID property for the DCIM_iDRACCardEnumeration, DCIM_iDRACCardString, and DCIM_iDRACCardInteger shall be “EmailAlert.<#>” where <#> is a number 1 through 4.
7.5.4 iDRAC Information 483 484 This section describes the attributes for iDRAC’s Active Directory Configuration. 485 486 The GroupID property for the DCIM_iDRACCardEnumeration, DCIM_iDRACCardString, and DCIM_iDRACCardInteger shall be “Info.1”. 487 488 The GroupDisplayName property for the DCIM_iDRACCardEnumeration, DCIM_iDRACCardString, and DCIM_iDRACCardInteger shall be “RAC Information”. 489 490 491 492 The following table describes the values for the DCIM_iDRACCardString of this group.
511 Table 20 – DCIM_iDRACCardEnumeration IP Blocking AttributeName 512 513 514 515 IsReadOnly Display Order PossibleValues RangeEnable Tune IP Range Enable FALSE 721 “Disabled”, “Enabled” BlockEnable Tune IP Range Enable FALSE 724 “Disabled”, “Enabled” The following table describes the values for the DCIM_iDRACCardString of this group. Each column heading corresponds to a property name on the DCIM_iDRACCardString class.
534 Table 23 – DCIM_iDRACCardEnumeration IPMI Lan AttributeName 535 536 537 538 AttributeDisplayName IsReadOnly Display Order PossibleValues Enable Enable or Disable IPMI over LAN FALSE 201 “Disabled”, “Enabled” PrivLimit Privilege Limit FALSE 202 “Administrator”, “User”, “Operator” AlertEnable Enable or Disable Alerts over LAN FALSE 205 “Disabled”, “Enabled” The following table describes the values for the DCIM_iDRACCardString of this group.
AttributeName AttributeDisplayName IsReadOnly Display Order PossibleValues EchoControl2 IPMI Serial Echo Control FALSE 627 “Disabled”, “Enabled” HandshakeControl IPMI Serial Handshake Control FALSE 628 “Disabled”, “Enabled” NewLineSeq IPMI Serial New Line Sequence FALSE 629 None, CR-LF, NULL, CR, LFCR, LF InputNewLineSeq IPMI Serial Input New Line Sequence FALSE 630 Enter, Null 552 553 NOTE: 1 – Enables or disables delete control on the IPMI serial interface.
AccumulateInterval1 IPMI SOL Accumulate Interval FALSE 644 1 255 SendThreshold IPMI SOL Send Threshold FALSE 645 1 255 572 573 NOTE: 1 – The typical amount of time in 5 ms increments that the BMC will wait before transmitting a partial SOL character data packet. See Intelligent Platform Management Interface Specification for more details. 574 7.5.9 575 This section describes the attributes for iDRAC’s Active Directory Configuration.
593 594 The GroupID property for the DCIM_iDRACCardEnumeration, DCIM_iDRACCardString, and DCIM_iDRACCardInteger shall be “IPv6.1”. 595 596 The GroupDisplayName property for the DCIM_iDRACCardEnumeration, DCIM_iDRACCardString, and DCIM_iDRACCardInteger shall be “IPv6 Information”. 597 598 599 600 601 The following table describes the values for the DCIM_iDRACCardEnumeration of this group. Each column heading corresponds to a property name on the DCIM_iDRACCardEnumeration class.
AttributeName 613 614 615 AttributeDisplayName IsReadOnly Display Order MinLength MaxLength Gateway IPV6 Gateway FALSE 155 0 63 LinkLocalAddress IPV6 Link Local Address FALSE 156 0 63 DNS1 IPV6 DNS Server1 FALSE 158 0 63 DNS2 IPV6 DNS Server2 FALSE 159 0 63 Address1 IPV6 Address 1 TRUE 154 0 63 Address2 IPV6 Address 2 TRUE 161 0 63 Address3 IPV6 Address 3 TRUE 162 0 63 Address4 IPV6 Address 4 TRUE 163 0 63 Address5 IPV6 Address 5 TRUE 164 0 63 Add
AttributeName AttributeDisplayName IsReadOnly Display Order LowerBound UpperBound PrefixLength IPV6 Link Local Prefix Length FALSE 157 1 128 IPV6NumOfExtAddress Total Number of Extended IP FALSE 160 0 255 621 622 7.5.11 LDAP 623 This section describes the attributes for iDRAC’s LDAP Configuration. 624 625 The GroupID property for the DCIM_iDRACCardEnumeration, DCIM_iDRACCardString, and DCIM_iDRACCardInteger shall be “LDAP.1”.
AttributeName AttributeDisplayName IsReadOnly Display Order MinLength MaxLength Server LDAP Server FALSE 1082 0 1024 BaseDN1 LDAP Base Domain Name FALSE 1084 0 254 UserAttribute LDAP User Attribute FALSE 1085 0 254 GroupAttribute LDAP Group Attribute FALSE 1086 0 254 BindDN2 LDAP Bind Distinguished Name FALSE 1088 0 254 BindPassword LDAP Bind Password FALSE* (this attribute is for setting only) 1089 0 255 SearchFilter LDAP Search Filter FALSE 1090 0 1024 645 NOTE: 1
AttributeName AttributeDisplayName LDAP Role Group Domain Name DN 663 664 665 IsReadOnly Display Order 1101, 1111, 1121, 1131, 1141 FALSE MinLength 0 MaxLength 1024 The following table describes the values for the DCIM_iDRACCardInteger of this group. Each column heading corresponds to a property name on the DCIM_iDRACCardInteger class. Each row contains the values for the properties listed in the column headings.
684 685 The GroupDisplayName property for the DCIM_iDRACCardEnumeration, DCIM_iDRACCardString, and DCIM_iDRACCardInteger shall be “NIC Information”. 686 687 688 689 690 The following table describes the values for the DCIM_iDRACCardEnumeration of this group. Each column heading corresponds to a property name on the DCIM_iDRACCardEnumeration class. The Description column contains the description for each of the attribute. Each row contains the values for the properties listed in the column headings.
702 Table 41 – DCIM_iDRACCardInteger NIC Information AttributeName AttributeDisplayName IsReadOnly Display Order LowerBound UpperBound MTU NIC MTU FALSE 58 576 1500 VLanID VLAN ID FALSE 65 0 4094 VLanPriority VLAN Priority FALSE 64 0 7 703 704 7.5.15 OS-BMC Passthru Configuration 705 This section describes the attributes for iDRAC’s OS-BMC Passthru Configuration..
728 729 730 The following table describes the values for the DCIM_iDRACCardInteger of this group. Each column heading corresponds to a property name on the DCIM_iDRACCardInteger class. Each row contains the values for the properties listed in the column headings.
AttributeName AttributeDisplayName CSR Key Size CsrKeySize 759 760 761 762 Display Order IsReadOnly PossibleValues 768 FALSE 1024, 2048 The following table describes the values for the DCIM_iDRACCardString of this group. Each column heading corresponds to a property name on the DCIM_iDRACCardString class. The Value Expression column contains constraints on string value formulation. Each row contains the values for the properties listed in the column headings.
AttributeName Serial Console No Authentication NoAuth 778 779 780 781 AttributeDisplayName Display Order IsReadOnly PossibleValues 604 FALSE “Disabled”, “Enabled” The following table describes the values for the DCIM_iDRACCardString of this group. Each column heading corresponds to a property name on the DCIM_iDRACCardString class. The Value Expression column contains constraints on string value formulation. Each row contains the values for the properties listed in the column headings.
AttributeName AttributeDisplayName Serial Communication Redirection Enable Enable 803 804 805 806 Display Order IsReadOnly FALSE 611 PossibleValues “Disabled”, “Enabled” The following table describes the values for the DCIM_iDRACCardString of this group. Each column heading corresponds to a property name on the DCIM_iDRACCardString class. The Value Expression column contains constraints on string value formulation. Each row contains the values for the properties listed in the column headings.
831 Table 54 – DCIM_iDRACCardEnumeration SNMP Configuration AttributeName AgentEnable 832 833 834 835 AttributeDisplayName SNMP Agent Enable IsReadOnly FALSE Display Order PossibleValues 701 “Disabled”, “Enabled” The following table describes the values for the DCIM_iDRACCardString of this group. Each column heading corresponds to a property name on the DCIM_iDRACCardString class. The Value Expression column contains constraints on string value formulation.
AttributeName DestIPv4Addr 855 856 857 Attribute Description Destination IPv4 Address IsReadOnly Display Order 1193, 1203, 1213, 1223 FALSE MinLength MaxLength 0 15 The following table describes the values for the DCIM_iDRACCardInteger of this group. Each column heading corresponds to a property name on the DCIM_iDRACCardInteger class. Each row contains the values for the properties listed in the column headings.
860 7.5.24 SNMP Trap IPv6 861 This section describes the attributes for iDRAC’s SNMP Trap IPv6 Configuration. 862 863 The GroupID property for the DCIM_iDRACCardEnumeration, DCIM_iDRACCardString, and DCIM_iDRACCardInteger shall be “SNMPTrapIPv6.<#>” where <#> is a number from 1 to 4. 864 865 The GroupDisplayName property for the DCIM_iDRACCardEnumeration, DCIM_iDRACCardString, and DCIM_iDRACCardInteger shall be “SNMP Trap IPv6”.
884 885 The GroupID property for the DCIM_iDRACCardEnumeration, DCIM_iDRACCardString, and DCIM_iDRACCardInteger shall be “SSH.1”. 886 887 The GroupDisplayName property for the DCIM_iDRACCardEnumeration, DCIM_iDRACCardString, and DCIM_iDRACCardInteger shall be “RAC SSH”. 888 889 890 891 892 The following table describes the values for the DCIM_iDRACCardEnumeration of this group. Each column heading corresponds to a property name on the DCIM_iDRACCardEnumeration class.
914 915 Table 65 – DCIM_iDRACCardInteger Telnet Configuration AttributeName AttributeDisplayName IsReadOnly Display Order LowerBound UpperBound Port Telnet Port FALSE 552 10 65535 Timeout1 Timeout FALSE 553 60 10800 916 NOTE: 1 - Specifies the number of seconds after which an idle Telnet session is automatically terminated. 917 7.5.27 Sys Log 918 This section describes the attributes for iDRAC’s Sys Log Configuration.
938 Table 68 – DCIM_iDRACCardInteger Sys Log AttributeName Port AttributeDisplayName IsReadOnly Sys Log Port FALSE Display Order 1072 LowerBound UpperBound 1 65535 939 940 7.5.28 iDRAC Firmware Update 941 This section describes the attributes for iDRAC’s Update Configuration. 942 943 The GroupID property for the DCIM_iDRACCardEnumeration and DCIM_iDRACCardString shall be “Update.1”.
964 965 966 967 The following table describes the values for the DCIM_iDRACCardString of this group. Each column heading corresponds to a property name on the DCIM_iDRACCardString class. The Value Expression column contains constraints on string value formulation. Each row contains the values for the properties listed in the column headings.
990 Table 73 – DCIM_iDRACCardString iDRAC Users AttributeName AttributeDisplayName User Admin User Name UserName Password2 User Admin Password Display Order IsReadOnly MinLength MaxLength FALSE1 251, 261, … , 401 0 16 FALSE 252, 262, … , 402 0 20 991 992 NOTE: 1 – UserName attribute for Users.1 GroupID is Read-Only, but for the GroupID Users.2 to Users.16, the attribute is settable.
AttributeName 1015 1016 1017 AttributeDisplayName IsReadOnly Display Order PossibleValues LocalVideo Local Video FALSE 583 “Disabled”, “Enabled” PluginType Plugin Type FALSE 584 “Active X”, “Java” EncryptEnable Encrypt Enable FALSE 582 “None”, “AES” The following table describes the values for the DCIM_iDRACCardInteger of this group. Each column heading corresponds to a property name on the DCIM_iDRACCardInteger class.
1032 7.5.33 RAC Web Server 1033 This section describes the attributes for iDRAC’s Web Server Configuration. 1034 1035 The GroupID property for the DCIM_iDRACCardEnumeration, DCIM_iDRACCardString, and DCIM_iDRACCardInteger shall be “WebServer.1”. 1036 1037 The GroupDisplayName property for the DCIM_iDRACCardEnumeration, DCIM_iDRACCardString, and DCIM_iDRACCardInteger shall be “RAC Web Server”.
AttributeName DaylightOffset AttributeDisplayName Display Order IsReadOnly Tune Day Light Offset FALSE 752 LowerBound UpperBound 0 60 1058 7.5.35 Remote File Share Configuration 1059 This section describes the attributes for iDRAC’s Remote File Share Configuration. 1060 1061 The GroupID property for the DCIM_iDRACCardEnumeration, DCIM_iDRACCardString, and DCIM_iDRACCardInteger shall be “RFS.1”.
1085 1086 7.6.2 Class Properties 1087 1088 1089 1090 1091 The following table details the implemented properties for DCIM_iDRACCardServcie instance representing the integer type attributes of a remote access card in a system. The “Requirements” column shall denote whether the property is implemented (for requirement definitions, see section 3). The “Additional Requirements” column shall denote either possible values for the property, or requirements on the value formulation.
1110 7.7.3 Class Properties 1111 1112 1113 1114 The following table details the implemented properties for DCIM_LCRegisteredProfile instance representing iDRAC Card Profile implementation. The “Requirements” column shall denote whether the property is implemented (for requirement definitions, see section 3). The “Additional Requirements” column shall denote either possible values for the property, or requirements on the value formulation.
1131 1132 Table 82 – SetAttribute( ) Method: Return Code Values Value Description 0 Completed with no error 2 Failed 1133 Table 83 – SetAttribute( ) Method: Parameters Qualifiers Name Type Description/Values IN, REQ Target String FQDD of the iDRAC Card IN, REQ AttributeName String Shall be formatted in the following way: #. Example: “MyGroup#MyAttribute” IN, REQ AttributeValue[] String Shall contain the required attribute value.
MessageID (OUT parameter) Message RAC010 Invalid character value RAC011 Job already exists Cannot process more Sets RAC012 User is not Authorized to perform this operation RAC013 Invalid FQDD RAC014 Invalid Attribute was Entered RAC015 Not one of the Possible Values for AttributeName RAC016 Invalid AttributeName RAC017 Job created to apply the attribute value RAC018 Completed with Errors RAC019 Job did not complete successfully.
MessageID (OUT parameter) Message MessageArguments[] RAC035 No Pending Configurations RAC037 No pending configurations to delete. RAC038 Unable to perform the operation due to an unknown error in iDRAC. RAC039 Invalid parameter value for . AttributeName, AttributeValue, Target RAC040 Missing parameters . AttributeName, AttributeValue, Target RAC041 The set operation on the event filters failed. RAC042 Invalid number of input parameters.
1140 1141 1142 1143 specified by the AttributeName parameter and the values specified by the AttributeValue parameter if the respective DCIM_IDRACCardAttribute.IsReadOnly property is FALSE. Invocation of this method when the respective DCIM_IDRACCardAttribute.IsReadOnly property is TRUE shall result in no change to the corresponding value of the DCIM_IDRACCardAttribute.CurrentValue property.
1152 1153 Table 87 – SetAttributes( ) Method: Standard Messages MessageID (OUT parameter) Message RAC001 The command was successful RAC002 General failure RAC003 Missing required parameter AttributeName, AttributeValue, Target RAC004 Invalid parameter value for AttributeName, AttributeValue, Target RAC005 Mismatch in AttributeName and AttributeValue count RAC006 AttributeValue cannot be changed for ReadOnly Attrinbute Name RAC007 Input out of range RAC008 Invalid
MessageID (OUT parameter) Message RAC027 Auto negotiation is Enabled so cannot set values for Speed or Duplex RAC028 DHCP is Disabled so cannot Enable DNS Domain Name From DHCP or DNS From DHCP RAC029 Required Dependancy not found in input RAC030 Required Attribute that this Attribute is dependent on has incorrect value RAC031 Invalid Value specified for the User name RAC032 Invalid Value specified for the DNS RAC name RAC033 IPv4 is Disabled so cannot enable attribute RAC034 Job Control Fa
MessageID (OUT parameter) Message MessageArguments[] existing Export job is completed or the job is cancelled. JCP019 Cannot create new jobs until the existing Import System Profile job is completed or cancelled. FM002 Feature(s) not available. FM003 A required license is missing or expired. The following features are not enabled: 1154 1155 8.3 DCIM_iDRACCardService.
Qualifiers Name Type Description/Values IN RebootJobType Uint16 Shall contain the requested reboot type: • 1 - PowerCycle • 2 - Graceful Reboot without forced shutdown • 3 - Graceful Reboot with forced shutdown. IN ScheduledStartTime String Start time for the job execution in format: yyyymmddhhmmss. The string "TIME_NOW" means immediate. IN UntilTime String End time for the job execution in format: yyyymmddhhmmss.
MessageID (OUT parameter) Message RAC018 Completed with Errors RAC019 Job did not complete successfully.
MessageID (OUT parameter) Message MessageArguments[] settings. RAC044 Unable to update some event filter settings. RAC045 Event filter does not exist for input parameter combination. RAC046 Unsupported event notification for the event filter specified. RAC047 Unsupported event action for the specified event filter. RAC048 The operation was successful. RAC049 Resource allocation failure.
1193 1194 62 Version 1.2.
1195 Table 92 – DeletePendingConfiguration( ) Method: Parameters Qualifiers Name Type Description/Values IN, REQ Target String FQDD of the iDRAC Card OUT MessageID String Error Message ID may be used to look-up in the Dell Message registry files. For more information, see Error Message Registry.
MessageID (OUT parameter) Message RAC023 The User Password is not configured so cannot Enable the User or set values for IPMILan IPMISerial or User Admin Privilege RAC024 VLAN is Disabled so cannot set VLAN Priority RAC025 DNS from DHCP is Enabled so cannot set values for DNS1 or DNS2 RAC026 Domain Name from DHCP Enabled so cannot set DNS Domain Name RAC027 Auto negotiation is Enabled so cannot set values for Speed or Duplex RAC028 DHCP is Disabled so cannot Enable DNS Domain Name From DHCP or
MessageID (OUT parameter) Message RAC048 The operation was successful. RAC049 Resource allocation failure. RAC050 Invalid country code RAC051 Unsupported parameter name JCP017 Job creation request unsuccessful. Maximum number of jobs reached. JCP018 Cannot create new jobs until the existing Export job is completed or the job is cancelled. JCP019 Cannot create new jobs until the existing Import System Profile job is completed or cancelled. FM002 Feature(s) not available.
1199 1200 8.5 1201 The ApplyAttributes() method is used to set or change the value of a iDRAC Card attribute. 1202 1203 NOTE: If setting numerous attributes at the same time, please make sure that WSMAN client has a timeout of at least 120 seconds. DCIM_iDRACCardService.
MessageID (OUT parameter) Message RAC010 Invalid character value RAC011 Job already exists, cannot process more sets RAC012 User is not authorized to perform this operation RAC013 Invalid FQDD RAC014 Invalid attribute was entered RAC015 Not one of the possible values for AttributeName AttributeName RAC016 Invalid AttributeName %s AttributeName RAC017 Job created to apply the attribute value RAC018 Completed with errors RAC019 Failed RAC020 Completed RAC021 DHCP is enabled.
MessageID (OUT parameter) Message MessageArguments[] RAC037 Attribute dependency failed RAC038 The command failed RAC039 Invalid parameter value for %s AttributeName, AttributeValue, Target RAC040 Missing parameter(s) %s AttributeName, AttributeValue, Target JCP017 Maximum job limit reached, cannot create new jobs JCP018 Backup job is running, cannot create new jobs until the existing backup job is completed or is cancelled.
MessageID (OUT parameter) Message MessageArguments[] AttributeValue count RAC006 AttributeValue cannot be changed for ReadOnly Attrinbute Name RAC007 Input out of range RAC008 Invalid boolean Value RAC009 String exceeds maximum length RAC010 Invalid character value RAC012 User is not Authorized to perform this operation RAC013 Invalid FQDD RAC014 Invalid Attribute was Entered RAC015 Not one of the Possible Values for AttributeName RAC016 Invalid AttributeName RAC018 Completed with Er
MessageID (OUT parameter) Message MessageArguments[] RAC035 No Pending Configurations RAC037 No pending configurations to delete. RAC038 Unable to perform the operation due to an unknown error in iDRAC. RAC039 Invalid parameter value for . AttributeName, AttributeValue, Target RAC040 Missing parameters . AttributeName, AttributeValue, Target RAC041 The set operation on the event filters failed. RAC042 Invalid number of input parameters.
1220 Table 101 – SendTestSNMPTrap( ) Method: Parameters Qualifiers Name Type Description/Values IN, REQ InstanceID String The property shall have the value of the InstanceID property of the attribute for which the test email alert is generated. OUT MessageID String Error Message ID may be used to look-up in the Dell Message registry files. For more information, see Error Message Registry.
MessageID (OUT parameter) Message MessageArguments[] VLAN Priority RAC025 DNS from DHCP is Enabled so cannot set values for DNS1 or DNS2 RAC026 Domain Name from DHCP Enabled so cannot set DNS Domain Name RAC027 Auto negotiation is Enabled so cannot set values for Speed or Duplex RAC028 DHCP is Disabled so cannot Enable DNS Domain Name From DHCP or DNS From DHCP RAC029 Required Dependancy not found in input RAC030 Required Attribute that this Attribute is dependent on has incorrect value RAC03
MessageID (OUT parameter) Message MessageArguments[] FM002 Feature(s) not available. FM003 A required license is missing or expired. The following features are not enabled: 1222 1223 1224 9 1225 See Lifecycle Controller (LC) Integration Best Practices Guide. 1226 10 1227 1228 Use Cases CIM Elements No additional details specified. 1229 11 1230 1231 1232 The following table describes the privilege and license requirements for the listed operations .
Class and Method Instance (GroupID.Attribute Name) Operation Required User Privilege Required License DCIM_iDRACCardView ENUMERA TE, GET Login None. DCIM_iDRACCardService ENUMERA TE, GET Login None.
Class and Method DCIM_iDRACCardService. SetAttribute(); DCIM_iDRACCardService. SetAttributes(); DCIM_iDRACCardService. ApplyAttributes() Instance (GroupID.Attribute Name) Operation Required User Privilege Required License Users.Privilege INVOKE Login, Configure Users LM_REMOTE_CONFIG URATION DCIM_iDRACCardService. CreateTargetedConfigJob() INVOKE Login, Configure LM_REMOTE_CONFIG URATION DCIM_iDRACCardService.
Class and Method Instance (GroupID.Attribute Name) Operation Required User Privilege Required License DCIM_iDRACCardString IPv6.Address4 ENUMERA TE, GET Login LM_IPV6 DCIM_iDRACCardString IPv6.Address5 ENUMERA TE, GET Login LM_IPV6 DCIM_iDRACCardString IPv6.Address6 ENUMERA TE, GET Login LM_IPV6 DCIM_iDRACCardString IPv6.Address7 ENUMERA TE, GET Login LM_IPV6 DCIM_iDRACCardString IPv6.Address8 ENUMERA TE, GET Login LM_IPV6 DCIM_iDRACCardString IPv6.
Required User Privilege Instance (GroupID.Attribute Name) Operation DCIM_iDRACCardEnumeration IPBlocking.BlockEnabl e ENUMERA TE, GET Login LM_SECURITY_LOCKO UT DCIM_iDRACCardInteger IPBlocking.FailCount ENUMERA TE, GET Login LM_SECURITY_LOCKO UT DCIM_iDRACCardInteger IPBlocking.FailWindow ENUMERA TE, GET Login LM_SECURITY_LOCKO UT DCIM_iDRACCardInteger IPBlocking.PenaltyTim e ENUMERA TE, GET Login LM_SECURITY_LOCKO UT DCIM_iDRACCardEnumeration SysLog.
Class and Method Instance (GroupID.Attribute Name) Operation Required User Privilege Required License DCIM_iDRACCardString AD.GlobalCatalog1 ENUMERA TE, GET Login LM_DIRECTORY_SER VICES DCIM_iDRACCardString AD.GlobalCatalog2 ENUMERA TE, GET Login LM_DIRECTORY_SER VICES DCIM_iDRACCardString AD.GlobalCatalog3 ENUMERA TE, GET Login LM_DIRECTORY_SER VICES DCIM_iDRACCardEnumeration AD.CertValidationEnab le ENUMERA TE, GET Login LM_DIRECTORY_SER VICES DCIM_iDRACCardEnumeration AD.
Required User Privilege Instance (GroupID.Attribute Name) Operation DCIM_iDRACCardEnumeration SmartCard.SmartCard CRLEnable ENUMERA TE, GET Login LM_TWO_FACTOR_AU THEN DCIM_iDRACCardEnumeration VirtualMedia.Attached ENUMERA TE, GET Login LM_VMEDIA DCIM_iDRACCardEnumeration VirtualMedia.BootOnce ENUMERA TE, GET Login LM_VMEDIA DCIM_iDRACCardEnumeration VirtualMedia.FloppyEm ulation ENUMERA TE, GET Login LM_VMEDIA DCIM_iDRACCardEnumeration VirtualMedia.
ANNEX A (Informative) 1234 1235 1236 1237 Privilege Information 1238 1239 1240 The following annex describes the mapping for iDRAC privileges. The integer value returned for the privilige represents a bit mask, where each bit represents a specific privilege. If a particular bit is set, then the corresponding privilege exists. Table 104 represents the bitmask mapping to the iDRAC privileges.