Release Notes

Storage Center Drive Firmware Updates 2019
Drive firmware updates are installed through Storage Center software updates. You can either download and apply the updates
immediately, or download the updates and then apply them later. See the Storage Manager Administrator's Guide or the Unisphere and
Unisphere Central Administrator's Guide for more information.
Topics:
Revision History
Update Priority
2019 Q4 Drive Firmware Updates
2019 Q3 Drive Firmware Updates
2019 Q2 Drive Firmware Updates
2019 Q1 Drive Firmware Updates
Revision History
Revision
Date Description
A March 2019 Initial release
B June 2019 Q2 2019 Updates
C September 2019 Q3 2019 Updates
D December 2019 Q4 2019 Updates
Update Priority
The following sections list the drive firmware updates by software version and product ID. Each update is assigned a priority to indicate
when to perform the update:
Recommended: Dell recommends applying this update during your next scheduled update cycle. The update contains feature
enhancements or changes that will help keep your system software current and compatible with other system modules (firmware,
BIOS, drivers and software).
Urgent: Dell highly recommends applying this update as soon as possible. The update contains changes to improve the reliability and
availability of your Dell system.
Optional: Dell recommends the customer review specifics about the update to determine if it applies to your system. The update
contains changes that impact only certain configurations, or provides new features that may or may not apply to your environment.
NOTE:
Storage Center version 6.6.x and later supports plug-and-play discovery for most new drive introductions. Drive
firmware package updates are not needed to accept new drives. Plug-and-play discovery support for 4K sector drives (8 TB
and 10 TB) requires Storage Center version 7.1.1 or later.
Document Number: 680-123-009
Rev. D
2019 - 12
Storage Center Drive Firmware Updates 2019 1

Summary of content (7 pages)