Dell Storage Center SCv300 and SCv320 Expansion Enclosure Getting Started Guide Regulatory Model: E03J/E04J Regulatory Type: E03J001/E04J001
Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Copyright © 2017 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Setting Up the Expansion Enclosure Before setting up your SCv300/SCv320 expansion enclosure, consider the following best practices. • Before connecting any cables between the storage system and expansion enclosure, physically label each port and connector. • Always follow proper power-up and power-down procedures when cycling power across the network. Verify that critical network components are on separate power circuits.
Figure 1. SCv300/SCv320 Expansion Enclosure Components 1. Power cables 2. SAS cables 3. Front bezel 4. Documentation 5. Expansion enclosure 6. Rack rails (2) Installing the Expansion Enclosure in a Rack Install the SCv300/SCv320 expansion enclosure in a rack. NOTE: Mount the expansion enclosure in a manner that allows for expansion in the rack and prevents the rack from becoming top‐heavy. 1.
Install the Front Bezel Install the bezel on the front of the expansion enclosure. 1. Hook the right end of the bezel onto the expansion enclosure. Figure 3. Front Bezel 2. Insert the left end of the bezel into the securing slot until the release latch snaps into place. 3. Secure the bezel with the keylock. Connecting the Power Cables Connect the power cables to the expansion enclosure. 1.
Col. Lomas Atlas 11950 México, D.F. Model number E03J and E04J Supply voltage 100–240 VAC Frequency 50/60 Hz Current consumption 8.6–4.3 A Technical Specifications The technical specifications of the SCv300/SCv320 expansion enclosures are displayed in the following tables. Drives SAS hard drives SCv300: Up to 12 hot-swappable 3.5-inch 12 Gbps SAS hard drives or SAS solid state drives (SSDs) SCv320: Up to 24 hot-swappable 2.
Power Supplies AC power supply (per power supply) Wattage 600 W Voltage 100–240 VAC (8.6–4.3 A), autoranging, 50/60 Hz Heat dissipation AC – 2047 BTU/hr Available Hard Drive Power (per Slot) Supported hard drive power consumption (continuous) Up to 1.2 A at +5 V, up to 0.5 A at +12 V Physical Height 8.7 cm (3.43 in.) Width 48.2 cm (18.98 in.) Depth SCv300: 59.4 cm (23.39 in.) SCv320: 54.1 cm (21.3 in.) Weight (maximum configuration) SCv300: 28.59 kg (63.
Environmental Storage 8 –16 to 10,600 m (–50 to 35,000 ft)
