User’s Guide Dell SE2717H/SE2717HX Model No.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. WARNING: A WARNING indicates a potential for property damage, personal injury or death. _________________________ Information in this document is subject to change without notice. © 2016 Dell Inc. All rights reserved.
Contents .About your monitor................................................................. 5 Package contents................................................................................... 5 Product features.....................................................................................6 Identifying parts and controls.............................................................. 7 Monitor specifications.........................................................................
.Troubleshooting.....................................................................39 Self-Test..................................................................................................39 Built-in diagnostics............................................................................. 40 Common problems...............................................................................41 Product-specific problems.................................................................43 .Appendix.............
About your monitor Package contents Your monitor ships with the components shown below. Ensure that you have received all the components and see Contacting Dell for more information if something is missing. NOTE: Some items may be optional and may not ship with your monitor. Some features or media may not be available in certain countries. NOTE: To set up with any other stand, please refer to the respective stand setup guide for setup instructions.
∞∞ HDMI Cable (for SE2717HX) DellTM SE2717H/SE2717HX Monitor ∞∞ Drivers and Documentation Media ∞∞ Quick Setup Guide ∞∞ Safety and Regulatory Information Product features The Dell SE2717H/SE2717HX flat panel display has an active matrix, Thin-Film Transistor (TFT), Liquid Crystal Display (LCD), anti-static, and LED backlight. The monitor features include: ∞∞ SE2717H/SE2717HX: 68.6 cm (27 inch) viewable area display (measured diagonally).
Identifying parts and controls Front view 1 2 Control buttons Label Description 1 Function buttons (For more information, see Operating your monitor) 2 Power On/Off button NOTE: For displays with glossy bezels the user should consider the placement of the display as the bezel may cause disturbing reflections from surrounding light and bright surfaces.
Back view 4 SE2717H/SE2717HX SVC Tag: xxxxxxx Express Service Code: xxx xxx xxx x S/N: CN-12MWY64180-341-001L -A00 SE2717Hc 1.5A XXXXX CAN ICES-3(B)/BMB-3(B) Apparatet må lkoples jordet s kkontakt. Apparaten skall anslutas ll jordat u ag. Laite on liite ävä suojakoske milla varuste uun pistorasiaan. Apparatets s kprop skal lslu es en s kkontakt med jord, som giver forbindelse l s kproppens jord. R33037 RoHS 䊂 Date of Mfg/⭕ӝᰛᵕ ⭕⭘ᰛᵕ: May. 2015 Date of Mfg/ Consumo de energía: xx.
Side view Bottom view 1 2 3 Bottom view without monitor stand Label Description Use 1 Power port Connect the power cable. 2 HDMI port Connect your computer with HDMI cable. 3 VGA port Connect your computer with VGA cable.
Monitor specifications Model SE2717H/SE2717HX Screen type Active matrix-TFT LCD Panel type In-Plane Switching Viewable image Diagonal 686.00 mm (27 in) Horizontal, Active Area 597.89 mm (23.54 in) Vertical, Active Area 336.31 mm (13.24 in) Area 2010.76 cm² (311.67 in²) Pixel pitch 0.
Resolution specifications Model SE2717H/SE2717HX Horizontal scan range 30 kHz to 83 kHz (automatic) Vertical scan range 48 Hz to 76 Hz (automatic) Maximum preset resolution 1920 x 1080 at 60 Hz for VGA port. 1920 x 1080 at 75 Hz for HDMI port.
Electrical specifications Model SE2717H/SE2717HX Video input signals ∞∞ HDMI 1.4, 600mV for each differential line, 100 ohm input impedance per differential pair, Analog RGB, 0.7 Volts +/-5%, positive polarity at 75 ohm input impedance 100 VAC to 240 VAC / 50 Hz or 60 Hz ± 3 Hz / 1.5A AC input voltage/frequency/ current Inrush current Note: The AC input current need to be 1.5A (typical). ∞∞ 120 V: 30 A (Max.) at 0°C (cold start) ∞∞ 240 V: 60 A (Max.
Environmental characteristics Model SE2717H/SE2717HX Temperature Operating 0°C to 40°C (32°F to 104°F) Non-operating ∞∞ Storage: -20°C to 60°C (-4°F to 140°F) ∞∞ Shipping: -20°C to 60°C (-4°F to 140°F) Humidity Operating 20% to 80% (non-condensing) Non-operating ∞∞ Storage 10% to 90% (non-condensing) ∞∞ Shipping 10% to 90% (non-condensing) Altitude Operating (maximum) 5,000 m (16,400 ft) Non-operating (maximum) 12,192 m (40,000 ft) Thermal dissipation ∞∞ 105.85 BTU/hour (maximum) ∞∞ 68.
NOTE: PON: Power consumption of on mode as defined in Energy Star 7.0 version. ETEC: Total energy consumption in KWh as defined in Energy Star 7.0 version. This document is informational only and reflects laboratory performance. Your product may perform differently, depending on the software, components and peripherals you ordered and shall have no obligation to update such information.
Pin assignments VGA connector Pin Number 15-pin Side of the Connected Signal Cable 1 Video-Red 2 Video-Green 3 Video-Blue 4 GND 5 Self-test 6 GND-R 7 GND-G 8 GND-B 9 Computer 5V/3.
HDMI connector Pin Number 19-pin Side of the Connected Signal Cable 1 TMDS DATA 2+ 2 TMDS DATA 2 SHIELD 3 TMDS DATA 2- 4 TMDS DATA 1+ 5 TMDS DATA 1 SHIELD 6 TMDS DATA 1- 7 TMDS DATA 0+ 8 TMDS DATA 0 SHIELD 9 TMDS DATA 0- 10 TMDS CLOCK+ 11 TMDS CLOCK SHIELD 12 TMDS CLOCK- 13 CEC 14 Reserved (N.C.
Plug and play capability You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. Most monitor installations are automatic, you can select different settings if desired. For more information about changing the monitor settings, see Operating your monitor.
Setting up the monitor Connecting the stand NOTE: The stand is detached when the monitor is shipped from the factory. NOTE: This is applicable for a monitor with a stand. When any other stand is bought, please refer to the respective stand setup guide for the set up instructions. To attach the monitor stand: 1. Place the monitor on a soft cloth or cushion. 2. Insert the tabs on the upper part of the stand in to the grooves on the back of the monitor. 3. Press down the stand till it snaps into place.
Connecting the VGA cable (sold separately for SE2717HX) Connecting the HDMI cable (sold separately for SE2717H) Organizing cables Use the cable-management slot to organize the cables connected to your monitor.
Removing the stand NOTE: To prevent scratches on the LCD screen while removing the stand, ensure that the monitor is placed on a soft and clean surface. NOTE: This is applicable for a monitor with a stand. When any other stand is bought, please refer to the respective stand setup guide for the set-up instructions. To remove the stand: 1. Place the monitor on a soft cloth or cushion. 2. Use a long and thin screwdriver to push the release latch. 3.
Operating your monitor Power on the monitor Press the button to turn on the monitor. Using the control buttons Use the control buttons on the bottom of the monitor to adjust the image being displayed. 1 2 3 4 1 2 3 4 5 Control buttons The following table describes the control buttons: Control Buttons Description Use this button to choose from a list of preset modes.
Use the Brightness/Contrast key to direct access to the "Brightness" and "Contrast" control menu. 2 Shortcut key/ Brightness/Contrast 3 Menu Use the Menu button to launch the On-Screen Display (OSD) and select the OSD Menu. See Accessing the OSD menu. Use this button to go back to the main menu or exit the OSD main menu. 4 Exit 5 Use the Power button to turn the monitor on and off. Power (with power light ) Solid white light indicates the monitor is On and fully functional.
Using the on-screen display (OSD) menu Accessing the OSD menu NOTE: Any changes you make are automatically saved when you move to another menu, exit the OSD menu, or wait for the OSD menu to automatically close. 1. Press the button to display the OSD main menu. Main Menu for analog (VGA) input Dell SE2717H/HX Energy Use Brightness / Contrast Auto Adjust Input Source Color Display Energy 75% 75% Menu Personalize Others Resolution: 1920x1080, 60Hz 2.
Icon Menu and Submenus Description Brightness/ Contrast Use this menu to activate brightness/contrast adjustment. Dell SE2717H/HX Energy Use Brightness / Contrast Auto Adjust Input Source Color Display Energy 75% 75% Menu Personalize Others Resolution: 1920x1080, 60Hz Brightness Brightness adjusts the luminance of the backlight. button to increase the brightness and press Press the button to decrease the brightness (min. 0 / max. the 100).
Auto Adjust Use this key to activate automatic setup and adjust menu. Dell SE2717H/HX Energy Use Brightness / Contrast Auto Adjust Press to adjust the screen automatically. Input Source Color Display Energy Menu Personalize Others Resolution: 1920x1080, 60Hz The following dialog appears on a black screen as the monitor self-adjusts to the current input: Auto Adjustment in Progress... Auto adjustment allows the monitor to self-adjust to the incoming video signal.
Input Source Use the input source menu to select between the different video signals that may be connected to your monitor. Dell SE2717H/HX Energy Use Brightness / Contrast VGA Auto Adjust HDMI Input Source Auto Select Color Reset Input Source On Display Energy Menu Personalize Others Resolution: 1920x1080, 60Hz VGA Select VGA input when you are using the analog (VGA) connector. Push to select the VGA input source. HDMI Select HDMI input when you are using the HDMI connector.
Preset Modes When you select preset modes, you can choose standard, comfortview, multimedia, movie, game, warm, cool, or custom color from the list. ∞∞ Standard: Loads the monitor's default color settings. This is the default preset mode. ∞∞ ComfortView: Decreases the level of blue light emitted from the screen to make viewing more comfortable for your eyes. ∞∞ Multimedia: Loads color settings ideal for multimedia applications. ∞∞ Movie: Loads color settings ideal for movies.
Input Color Format Allows you to set the video input mode to: ∞∞ RGB: Select this option if your monitor is connected to a computer or DVD player using the HDMI cable. ∞∞ YPbPr: Select this option if your DVD player supports only YPbPr output.
Display Use the display to adjust image.
Energy Dell SE2717H/HX Energy Use Brightness / Contrast Power Button LED Auto Adjust Reset Energy On During Active Input Source Color Display Energy Menu Personalize Others Resolution: 1920x1080, 60Hz Power Button LED Allows you to set the power LED indicator on during active or off during active to save energy. Reset Energy Select this option to restore default Energy settings.
Menu Select this option to adjust the settings of the OSD, such as, the languages of the OSD, the amount of time the menu remains on screen and so on.
Personalize Users can choose a feature from shortcut key 1, shortcut key 2, reset personalization, preset modes or Brightness/ Contrast and set it as a shortcut key.
DDC/CI DDC/CI (display data channel/command interface) allows your monitor parameters (brightness, color balance and etc.) to be adjustable via the software on your computer. You can disable this feature by selecting disable. Enable this feature for best user experience and optimum performance of your monitor.
OSD warning messages When the Dynamic Contrast feature is enabled (in these preset modes: Game or Movie), the manual brightness adjustment is disabled. Dell SE2717H/HX To allow manual adjustment of brightness, the Dynamic Contrast will be switched off. Do you want to continue? No Yes When the monitor does not support a particular resolution mode, the following message is displayed: Dell SE2717H/HX The current input timing is not supported by the monitor display.
Dell SE2717H/HX ? No VGA signal from your device. Press any key on the keyboard or move the mouse to wake it up. If there is no display, press the monitor button again to select the correct input source. If VGA or HDMI cable is not connected, a floating dialog box as shown below appears. The monitor will enter Power Save Mode after 4 minutes if left at this state. Dell SE2717H/HX ? No VGA Cable The display will go into Power Save Mode in 4 minutes. www.dell.
Setting up your monitor Setting the maximum resolution To set the maximum resolution for the monitor: In Windows 7, Windows 8, Windows 8.1 and Windows 10: 1. For Windows 8 and Windows 8.1, select the Desktop tile to switch to classic desktop. 2. Right-click on the desktop and click Screen Resolution. 3. Click the Dropdown list of the Screen Resolution and select 1920 x 1080. 4. Click OK. If you do not see 1920 x 1080 as an option, you may need to update your graphics driver.
6. Refer to the graphic card provider website for updated driver (for example, http://www.ATI.com OR http://www.AMD.com). 7. After installing the drivers for your graphics adapter, attempt to set the resolution to 1920 x 1080 again. NOTE: If you are unable to set the recommended resolution, contact the manufacturer of your computer or consider purchasing a graphics adapter that will support the video resolution.
Using tilt NOTE: This is applicable for a monitor with a stand. When any other stand is bought, please refer to the respective stand setup guide for set up instructions. Tilt NOTE: The stand is detached when the monitor is shipped from the factory.
Troubleshooting WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions. Self-Test Your monitor provides a self-test feature that allows you to check if your monitor is functioning properly. If your monitor and computer are properly connected but the monitor screen remains dark, run the monitor self-test by performing the following steps: 1. Turn off both your computer and the monitor. 2. Disconnect all video cables from the monitor.
Built-in diagnostics Your monitor has a built-in diagnostic tool that helps you determine if any screen abnormality you experience is an inherent problem with your monitor, or with your computer and video card. NOTE: You can run the built-in diagnostics only when the video cable is unplugged and the monitor is in self-test mode. 1 2 3 4 5 To run the built-in diagnostics: 1. Ensure that the screen is clean (no dust particles on the surface of the screen). 2.
Common problems The following table contains general information about common monitor problems you might encounter and the possible solutions: Common Symptoms Possible Solutions No Video/Power LED off ∞∞ Ensure that the video cable connecting the monitor and the computer is properly connected and secure. ∞∞ Verify that the power outlet is functioning properly using any other electrical equipment. ∞∞ Ensure that the power button is pressed.
Horizontal/Vertical Lines ∞∞ Reset the monitor to Factory Settings (Factory Reset). ∞∞ Perform monitor self-test feature check and determine if these lines are also in self-test mode. ∞∞ Check for bent or broken pins in the video cable connector. ∞∞ Run the built-in diagnostics. Synchronization Problems ∞∞ Reset the monitor to Factory Settings (Factory Reset). ∞∞ Perform monitor self-test feature check to determine if the scrambled screen appears in self-test mode.
Product-specific problems Specific Symptoms Screen image is too small Possible Solutions ∞∞ Check the Aspect Ratio setting in the Display settings OSD. ∞∞ Reset the monitor to Factory Settings (Factory Reset). Cannot adjust the ∞∞ Turn Off the monitor, unplug the power cord, plug it back, and then monitor with the turn On the monitor. buttons on the bottom ∞∞ Check if the OSD menu is locked. If yes, press and hold the menu of the panel button for 10 seconds to unlock. (For more information, see Lock).
Appendix WARNING: Safety Instructions WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards. For information on safety instructions, see the Product Information Guide. FCC notices (U.S. Only) and other regulatory information For FCC notices and other regulatory information, see the regulatory compliance website located at www.dell.com/regulatory_compliance.
