Dell™ S320/S320wi Projector User’s Guide
Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your projector CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. ____________________ Information in this document is subject to change without notice. © 2012 Dell Inc. All rights reserved.
Contents 1 Your Dell Projector . . . . . . . . . . . . . . . . . . About Your Projector . . . . . . . . . . . . . . . . About Your Interactive Pen 2 . . . . . . . . . . . . . Connecting Your Projector . . . . . . . . . . . . Installing the Optional Wireless Module Kit . . . . Installing the Optional Interactive Module Kit 11 13 14 15 . . . . . . . . . . . 16 . . . . . . . . . . . . . . . . 17 . . . . 17 . . . . .
Connection With Commercial RS232 Control Box . 27 . . . . . . . 28 Using Your Projector . . . . . . . . . . . . . . . . 30 Turning Your Projector On . . . . . . . . . . . . . . . . 30 Connecting With Your Interactive Pen 3 Turning Your Projector Off . . . . . . . . . . . . . . . . Adjusting the Projected Image . . . . . . . . . . . . . Raising the Projector Height . . . . . . . . . . . . Lowering the Projector Height Adjusting the Projector Focus . 31 31 . . . . . . . . . . . . . 32 .
AUTO ADJUST . . . . . . . . . . . . . . . . . . . BRIGHTNESS/CONTRAST 53 . . . . . . . . . . . . . . . . . . . . 53 . . . . . . . . . . . . . . . . . . . . . . 54 VIDEO MODE VOLUME . AUDIO INPUT . . . . . . . . . . . . . . . . . . . . ADVANCED SETTINGS 54 . . . . . . . . . . . . . . . 55 . . . . . . . . . . . . . . . . . . . . . 72 . . . . . . . . . . . . . . . . . . . . . . . . 73 LANGUAGE HELP . 52 . . . . . . . . . . . . . Wireless Networking Installation . . . . . . . . . . . .
Configuring the Network Setting Accessing Web Management . . . . . . . . . . 95 . . . . . . . . . . . 95 Managing the Projector From Web Management (Network RJ45 Kit is Optional for S320) . . . . . . . . . . . . . . . . 110 110 . . . . . . . . . . . . . . . . 111 . . . . . . . . . . . . . . . . 125 Accessing Web Management Make Application Token 4 Troubleshooting Your Projector Troubleshooting your Interactive Pen . Guiding Signals 6 Contacting Dell . . . . . . . . . . . . . . . . . . . . .
1 Your Dell Projector Your projector comes with all the items shown below. Ensure that you have all the items, and contact Dell if anything is missing. S320 Standard Package Contents Power cable 1.8 m VGA cable (VGA to VGA) AAA Batteries (2) Remote control POWER A A ENTER A A MENU A SOURCE ASPECT VOL VIDEO MODE A MUTE KEYSTONE VOL AUTO ADJ.
S320wi Standard Package Contents Power cable 1.8 m VGA cable (VGA to VGA) AAA Batteries (2) Remote control POWER A A ENTER A A MENU A SOURCE ASPECT VOL VIDEO MODE A MUTE KEYSTONE VOL AUTO ADJ.
S320wi Standard Package Contents 5 m Mini USB cable (USB-A to Mini USB-B) USB cable (USB-A to USB-B) Dell Interactive wireless dongle (Optional) DPB2701 Your Dell Projector 9
About Your Projector Top View Bottom View 10 7 26.0±0.1 14.0±0.1 9 1 82.30±0.15 5 4 3 2 110.00±0.15 6 10 8 1 Control panel 2 5W speaker 3 Focus ring 4 Lens 5 IR receivers 6 Lens cap 7 Lamp cover 8 Mounting holes for wall mount: Screw hole M3 x 6.5 mm depth.
About Your Interactive Pen Top View Bottom View 4 5 3 6 7 2 8 1 1 Replaceable nib 2 Lens 3 Control buttons 4 LED indicators 5 Wrist strap holder 6 Power switch 7 Firmware upgrade connector 8 Mini USB charge connector NOTE: Optional (can be bought separately), or comes with S320wi only. CAUTION: Safety Instructions 1 Do not use the projector near appliances that generate a lot of heat. 2 Do not use the projector in areas where there is an excessive amount of dust.
8 Do not place any objects near or in front of the projector or cover its lens while the projector is on as the heat may cause the object to melt or burn. 9 Do not use the wireless projector near cardiac pacemakers. 10 Do not use the wireless projector near medical equipment. 11 Do not use the wireless projector near microwave ovens. NOTE: • Do not attempt to wall mount the projector by yourself. It should be installed by a qualified technician. • Recommended Projector Wall Mount Kit (P/N: 4TVT8/V3RTH).
Connecting Your Projector 1 VGA-OUT 2 3 4 VGA-A IN VGA-B IN HDMI Audio-In 15 Audio-Out Composite 14 13 12 S-Video 5 6 USB-A DOUSB 2 7 RJ45 RS232 Mini-USB 11 10 9 8 1 VGA output (monitor loop through) connector 9 Security cable slot 2 VGA-A input (D-sub) connector 10 Mini USB (Mini Type B) connector for remote mouse, Interactive function, and firmware upgrade 3 VGA-B input (D-sub) connector 11 S-Video connector 4 HDMI connector 12 Composite Video connector 5 USB Type
Installing the Optional Wireless Module Kit Your projector must be installed with the wireless module kit if you want to use the wireless networking option. Refer to "Wireless Networking Installation" on page 74. The wireless module kit is not shipped with your S320 projector. You can purchase it on the Dell website at www.dell.com. NOTE: Wireless module kit embedded for S320wi.
Installing the Optional Interactive Module Kit Your projector must be installed with Interactive module kit if you want to use the Interactive feature. The Interactive module kit is not shipped with your S320 projector. You can purchase it on the Dell website at www.dell.com. NOTE: Interactive module kit embedded for S320wi.
Installing the Optional RJ45 Kit Your projector must be installed with RJ45 kit if you want to use the network option. The RJ45 kit is not shipped with your S320 projector. You can purchase it on the Dell website at www.dell.com. NOTE: RJ45 is embedded in the S320wi.
Connecting to a Computer Connecting a Computer Using a VGA Cable VGA-OUT VGA-A IN VGA-B IN HDMI USB-A Audio-In 1 Audio-Out Composite S-Video DOUSB 2 RJ45 RS232 Mini-USB 3 MOLEX 1 Power cord 2 VGA to VGA cable 3 USB-A to Mini USB-B cable NOTE: The Mini USB cable must be connected if you want to use the Page Up and Page Down features on the remote control.
Monitor Loop-Through Connection Using VGA Cables VGA-OUT VGA-A IN VGA-B IN HDMI USB-A Audio-In 1 2 1 Power cord 2 VGA to VGA cable Audio-Out Composite S-Video Mini-USB DOUSB RJ45 RS232 2 NOTE: Only one VGA cable is shipped with your projector. An additional VGA cable can be purchased on the Dell website at www.dell.com.
Connecting a Computer Using a RS232 cable VGA-OUT VGA-A IN VGA-B IN HDMI USB-A Audio-In Audio-Out Composite S-Video Mini-USB 1 1 Power cord 2 RS232 (9-pin D-sub female to female pin2-3 swap) cable DOUSB RJ45 RS232 2 NOTE: The RS232 (9-pin D-sub female to female pin2-3 swap) cable is not shipped with your projector. Consult a professional installer for the cable and RS232 remote control software.
Connecting a Computer by USB Cable VGA-OUT VGA-A IN VGA-B IN HDMI USB-A Audio-In Audio-Out Composite S-Video DOUSB RJ45 RS232 Mini-USB 1 2 MOLEX 1 Power cord 2 USB-A to USB-B cable NOTE: Plug and Play. Only one USB cable is shipped with your projector. An additional USB cable can be purchased on the Dell website at www.dell.com.
Connecting a Computer Using Wireless Dongle (Optional) NOTE: A USB wireless dongle is embedded in the Dell S320wi. NOTE: Wireless functionality is an optional feature on the Dell S320. If you would like to include wireless functionality, please install a wireless module and a USB wireless dongle into your Dell S320. See step-by-step installation guide on page 13. Wireless modules and USB wireless dongles are available and sold separately on www.dell.com.
Connecting a DVD Player Connecting a DVD Player Using an S-Video Cable VGA-OUT VGA-A IN VGA-B IN HDMI USB-A Audio-In Audio-Out Composite 1 S-Video Mini-USB DOUSB RJ45 RS232 2 UPQ!NFOV IENJ NFOV PQFO0DMPTF TUBOECZ0PO EWE0VTC 1 Power cord 2 S-Video cable VTC FOUFS IPNF NFOV SFUVSO NOTE: The S-Video cable is not shipped with your projector. You can purchase the S-Video extension (50 ft/100 ft) cable on the Dell website at www.dell.com.
Connecting a DVD Player Using a Composite Video Cable VGA-OUT VGA-A IN VGA-B IN HDMI USB-A Audio-In Audio-Out Composite 1 S-Video Mini-USB DOUSB RJ45 RS232 2 UPQ!NFOV IENJ NFOV PQFO0DMPTF TUBOECZ0PO EWE0VTC 1 Power cord 2 Composite Video cable VTC FOUFS IPNF NFOV SFUVSO NOTE: The Composite Video cable is not shipped with your projector. You can purchase the Composite Video Extension (50 ft/100 ft) cable on the Dell website at www.dell.com.
Connecting a DVD Player Using a Component Video Cable VGA-OUT VGA-A IN VGA-B IN HDMI USB-A Audio-In 1 Audio-Out Composite S-Video Mini-USB DOUSB RJ45 RS232 2 UPQ!NFOV IENJ NFOV PQFO0DMPTF TUBOECZ0PO EWE0VTC 1 Power cord 2 VGA to Component Video cable VTC FOUFS IPNF NFOV SFUVSO NOTE: The VGA to Component Video cable is not shipped with your projector. You can purchase the VGA to Component Video Extension (50 ft/100 ft) cable on the Dell website at www.dell.com.
Connecting a DVD Player Using a HDMI Cable VGA-OUT VGA-A IN VGA-B IN HDMI USB-A Audio-In Audio-Out Composite S-Video Mini-USB DOUSB RJ45 RS232 2 1 UPQ!NFOV IENJ NFOV PQFO0DMPTF TUBOECZ0PO EWE0VTC 1 Power cord 2 HDMI cable VTC FOUFS IPNF NFOV SFUVSO NOTE: The HDMI cable is not shipped with your projector. You can purchase the HDMI cable on the Dell website at www.dell.com.
Connecting to Local Area Network To project an image and control the projector that is connected to a network through a RJ45 cable. VGA-OUT VGA-A IN VGA-B IN HDMI USB-A Audio-In Audio-Out Composite S-Video 1 Mini-USB DOUSB RJ45 RS232 2 Local Area Network (LAN) 1 Power cord 2 RJ45 cable NOTE: The RJ45 cable is not shipped with your projector. You can purchase the RJ45 cable on the Dell website at www.dell.com. NOTE: LAN module kit is not shipped with your S320 projector.
Connection With Commercial RS232 Control Box VGA-OUT VGA-A IN VGA-B IN HDMI USB-A Audio-In Audio-Out Composite S-Video DOUSB Mini-USB 1 RJ45 RS232 2 3 1 Power cord 2 RS232 (9-pin D-sub female to female pin2-3 swap) cable 3 Commercial RS232 control box NOTE: The RS232 (9-pin D-sub female to female pin2-3 swap) cable is not shipped with your projector. Consult a professional technician to obtain the cable.
Connecting With Your Interactive Pen VGA-OUT VGA-A IN VGA-B IN HDMI USB-A Audio-In Audio-Out Composite S-Video DOUSB RJ45 RS232 Mini-USB 4 1 2 3 MOLEX 5 1 Power cord 2 VGA to VGA cable 3 USB-A to Mini USB-B cable 4 Projection screen 5 Interactive Pen 28 Connecting Your Projector
NOTE: Interactive module kit is not shipped with your S320 projector. If you want to use the Interactive feature, see "Installing the Optional Interactive Module Kit" on page 15. You can purchase it on the Dell website at www.dell.com. NOTE: 1 Interactivity is supported only in the following input modes: VGA and HDMI from a PC, and Wireless Display, USB Display, and LAN Display. 2 To enable Interactive Pen, the 2nd connection between computer and projector is required.
Using Your Projector 3 Turning Your Projector On NOTE: Turn on the projector before you turn on the source (computer, DVD player, etc.). The Power button light blinks blue until pressed. 1 Remove the lens cap. 2 Connect the power cord and appropriate signal cables to the projector. For information about connecting the projector, see "Connecting Your Projector" on page 13. 3 Press the Power button (see "Using the Control Panel" on page 35 to locate the Power button).
3 To power off the projector quickly, press the Power button and hold for 1 second while the projector’s cooling fans are still running. NOTE: Before you turn on the projector again, wait for 60 seconds to allow the internal temperature to stabilize. 4 Disconnect the power cord from the electrical outlet and the projector. Adjusting the Projected Image Raising the Projector Height 1 Raise the projector to the desired display angle, and use the front tilt adjustment wheel to fine-tune the display angle.
Adjusting the Projector Focus CAUTION: To avoid damaging the projector, ensure that the front tilt adjustment wheel is fully retracted before moving the projector or placing the projector in its carrying case. NOTE: The carrying case is not shipped with your projector. You can purchase the carrying case (P/N: 8R3VM) on the Dell website at www.dell.com. 1 Rotate the focus tab until the image is clear. The projector focuses at distances ranging between 1.31 ft to 12.5 ft (0.4 m to 3.82 m).
Adjusting Projection Image Size S320/S320wi 300" (762.00 cm) 246" (624.84 cm) 139" (353.06 cm) 86" (218.44 cm) 3.51' (1.07 m) 5.71' (1.74 m) 7.91' (2.41 m) 31.45" (79.88 cm) 10.1' (3.08 m) 12.5' (3.82 m) Projector to screen distance 193" (490.22 cm) 1.31' (0.
S320/S320wi Screen size Top (Min zoom) Desired Distance (m) Diagonal (inch) W (cm) x H (cm) From base to top of image (cm) 31.45 65 x 49 56 0.4 1.07 86 174 x 130 150 1.74 139 283 x 212 244 2.41 193 392 x 294 338 3.08 246 501 x 376 432 3.82 300 610 x 457 526 C Height (Hd): 244 cm * This graph is for user reference only. * Offset Ratio: 115±5% B 139" onal: Diag A s Di 34 Using Your Projector 1.
Using the Control Panel 1 2 3 4 10 5 6 9 8 7 1 Power Turns the projector on or off. For more information, see "Turning Your Projector On" on page 30 and "Turning Your Projector Off" on page 30. 2 Up / Keystone adjustment Press to navigate through the On-Screen Display (OSD) Menu items. Press to adjust image distortion caused by tilting the projector (+37/-40 degrees).
4 TEMP warning light If the TEMP amber indicator is on or blinking, one of the following problems could be occurring: • Internal temperature of the projector is too high • Color wheel failure For more information, see "Troubleshooting Your Projector" on page 126 and "Guiding Signals" on page 132. 5 Enter Press to confirm the selection item. 6 IR Receiver Point the remote control towards the IR receiver and press a button. 7 Right Press to navigate through the On-Screen Display (OSD) Menu items.
Using the Remote Control POWER 1 14 2 15 ENTER MENU 16 17 18 19 20 21 3 ASPECT 5 SOURCE VOL VIDEO MODE KEYSTONE VOL AUTO ADJ. FREEZE 25 26 1 Power 2 Enter 3 4 Right Down 6 7 MUTE MOUSE 8 9 BLANK 22 23 24 4 ZOOM ZOOM INFO VGA VIDEO S-VIDEO 10 11 12 13 Turns the projector on or off. For more information, see "Turning Your Projector On" on page 30 and "Turning Your Projector Off" on page 30. ENTER Press to confirm the selection.
5 Aspect Ratio Press to change the aspect ratio of a displayed image. 6 Mute Press to mute or un-mute the projector speaker. 7 Video mode The projector has preset configurations that are optimized for displaying data (presentation slides) or video (movies, games, etc.). Press the Video Mode button to toggle between Presentation mode, Bright mode, Movie mode, sRGB, or Custom mode. Pressing the Video Mode button once will show the current display mode.
19 Volume down 20 Keystone adjustment + Press to adjust image distortion caused by tilting the projector (+37/-40 degrees). 21 Keystone adjustment Press to adjust image distortion caused by tilting the projector (+37/-40 degrees). 22 Auto Adjust Press to synchronize the projector with the input source. Auto adjust does not operate if the OSD is displayed. VOL Press to decrease the volume. 23 Zoom + Press to increase the image. 24 Zoom Press to decrease the image.
Using the Interactive Pen Top View Bottom View 1 2 6 3 7 5 8 4 1 Replaceable nib Press the nib to draw or write. When the nib is engaged, it works like left clicking your mouse to draw or write. NOTE: • If the nib is engaged, the Pen will switch to Draw mode and the button function will be temporarily disabled. • When the nib wears out, change the nib head as shown below.
2 Left This button acts like the left click button of a mouse. 3 Function Functions available are listed in the OSD Menu "Set function" (see page 70). NOTE: Double-clicking the Function button will act as Undo, if supported by the software. 4 Mini USB charge connector Allow you use Mini USB cable to charge. See "Charging the Interactive Pen Battery" on page 44. 5 LED indicators Two LED indicators are available: Green and Amber (see "Interactive Pen LED Guiding Signals" on page 133).
Using the Wrist Strap Please use the wrist strap as a safety precaution in case of loss of grip on the Interactive Pen, and prevent damage to the Interactive Pen, surrounding objects, or injury to other people. 1 Feed the cord on the wrist strap through the connector holder. 2 Wear the wrist strap on your wrist.
Installing the Remote Control Batteries NOTE: Remove the batteries from the remote control when not in use. 1 Press the tab to lift the battery compartment cover. 2 Check the polarity (+/-) marking on the batteries. 1 2 according to the marking in the battery compartment. AAA AAA 3 Insert the batteries and align their polarity correctly 3 NOTE: Avoid mixing different types of batteries or using new and old batteries together. AAA AAA 4 Slip the battery cover back.
Charging the Interactive Pen Battery When the Interactive Pen amber battery light starts to blink, its internal battery is low (If the battery is fully discharged, you will not be able to turn the Interactive Pen on by pressing its nib, left, right or set function buttons). To charge the battery, connect a mini USB cable between the Interactive Pen and your computer or laptop (If connecting to computer or laptop, make sure the computer or laptop is powered on).
Docking Charger Introduction (Optional) Front View Back View 1 2 3 1 Power LED light 2 Mini USB connector 3 Power switch 4 Power cord connector 4 NOTE: The Docking Charger is not shipped with your S320 or S320wi projector. You can purchase the Docking Charger on the Dell website at www.dell.com. LED Indicator on Docking Charger Green LED Solid On When the docking charger is switched on, the Green LED will turn solid ON.
LED Indicator on Interactive Pen Amber LED Solid On The Amber LED will turn solid ON during the charge process. Amber LED Off Once battery is fully charged, the LED will turn OFF indicating "Charge Complete". Amber LED Flashing If the Amber LED starts FLASHING (0.4 sec ON, 0.6 sec OFF, 1 sec per flashing cycle), it indicates no charging takes place. Charger error or bad battery is identified.
Charging the Interactive Pen Battery by Docking Charger When the Interactive Pen amber battery light starts to blink, its internal battery is low (If the battery is fully discharged, you won't be able to turn the Interactive Pen on by pressing its nib, left, right or set function buttons). To charge the battery, you can follow the following steps: 1 Connect the power cable to the wall outlet. 2 Plug the Interactive Pen into the Mini USB port of the docking charger.
NOTE: During the charging process, Interactive Pen amber battery light will be lit all the time until the charging process is complete. NOTE: For first time use, it takes at least 4-5 hours to fully charge the battery. A fully charged battery will allow up to 25 hours of non-stop use or up to 4 weeks in standby. CAUTION: If your docking charger cannot charge, contact DELL.
Operating Range with Remote Control TM S-VIDEO VIDEO VGA INFO ZOOM ZOOM KEYSTONE VOL BLANK MOUSE ±20° MUTE SOURCE VIDEO MODE VOL ASPECT 7 m/22.97 feet MENU ENTER Distance AUTO ADJ. FREEZE Operating range Angle POWER Distance Angle Angle e nc sta Di WER PO U MEN R TE EN CE UR SO VO NE TO YS KE L VO L ZO J.
Operating Range with Interactive Pen Distance Angle Operating range Angle 0° 20° 45° Distance 9 m/29.53 feet 7 m/22.97 feet 5 m/16.4 feet Angle e nc sta Di NOTE: • Projector is at 2000 lm brightness, with 100 inches image size, and in Bright mode. • Can support multiple pens (up to 10 pens) connecting to one projector but the pens cannot be used simultaneously. • Actual operating range may slightly differ from the diagram. • The projector brightness decay will affect the operating range of the pen.
Using the On-Screen Display • The projector has a multi-language On-Screen Display (OSD) Menu that can be displayed with or without an input source. • Press the Menu button on the control panel or the remote control to enter the Main Menu. or buttons on • To navigate through the tabs in the Main Menu, press the your projector's control panel or remote control. or button on your projector’s control • To select a submenu, press the panel or remote control.
NOTE: The WIRELESS/USB can be used after the "Wireless and LAN" option is turned on. INPUT SOURCE WIRELESS/USB The Input Source Wireless/USB menu allows you to activate the Wireless Display, USB Display, and USB Viewer. to access the projector's Wireless Guide screen. See WIRELESS DISPLAY—Press "Wireless Guide screen" on page 76. USB DISPLAY—Allows you to display the computer/laptop screen to your projector via the USB cable. USB VIEWER—Allows you to display photo and PPT files from your USB flash.
BRIGHTNESS/CONTRAST The Brightness/Contrast menu allows you adjust the brightness/contrast settings of your projector. BRIGHTNESS—Use CONTRAST—Use and and to adjust the brightness of the image. to adjust the display contrast. NOTE: If you adjust the settings for Brightness and Contrast the projector automatically switch to Custom mode.
VOLUME The Volume menu allows you adjust the volume settings of your projector. VOLUME—Press to increase the volume and to decrease the volume. AUDIO INPUT The Audio Input menu allows you to select your audio input source. The options are: Analog In, HDMI, and Wireless/LAN. NOTE: Avoid line input signal from plugging into microphone port. Otherwise, user may listen to noises from speakers due to clamping and distortion of audio signal.
ADVANCED SETTINGS The Advanced Settings menu allows you to change settings for Image, Display, Projector, LAN, Wireless, Menu, Power, Interactive, and Information. IMAGE SETTINGS (IN PC MODE)—Select and press to activate image settings. The image settings menu provides the following options: COLOR TEMPERATURE—Allows you to adjust the color temperature. The screen appears cooler at higher color temperatures and warmer at lower color temperatures.
The image settings menu provides the following options: COLOR TEMPERATURE—Allows you to adjust the color temperature. The screen appears cooler at higher color temperatures and warmer at lower color temperatures. When you adjust the values in the Color Adjust menu, the Custom mode is activated. The values are saved in the Custom mode. RGB COLOR ADJUST—Allows you to manually adjust the colors red, green, and blue.
The image settings menu provides the following options: VGA OUTPUT—Select On or Off the VGA output function at projector standby status. Default is Off. to activate display settings. DISPLAY SETTINGS (IN PC MODE)—Select and press The display settings menu provides the following options: HORIZONTAL POSITION—Press the image left. VERTICAL POSITION—Press image down.
•16:9 — The input source scales to fit the width of the screen to project a 16:9 screen image. •4:3 — The input source scales to fit the screen and projects a 4:3 image. ZOOM—Press and to zoom and view the image. Adjust the image scale by pressing or to view on your remote control and press only. ZOOM NAVIGATION—Press Navigation menu. Use to activate the Zoom to navigate the projection screen. 3D DISPLAY—Select On to start the 3D display function (default is Off). NOTE: 1.
3D FORMAT—Allows you to select the 3D format. Options are: Side By Side, Side By Side Full, Frame Sequential, Field Sequential, Top/Bottom, and Top/Bottom Full. 3D SYNC INVERT—If you see a discrete or overlapping image while wearing DLP 3D goggles, you may need to execute 'Invert' to get best match of left/right image sequence to get the correct image. (For DLP 3D goggles) to activate display settings.
a Computer/Laptop with a 120 Hz signal output quad-buffered graphics card. b "Active" 3D glasses with DLP Link™. c 3D content. See "Note 4". d 3D Player. (Example: Stereoscopic Player...) 2. Enable the 3D function when it satisfies any of the below-mentioned conditions: a Computer/Laptop with graphics card, capable of outputting at 120 Hz signal via VGA or HDMI cable. b Input a suite of 3D content via Video and S-Video. 3.
AUTO SOURCE—Select Off (the default) to lock the current input signal. If you press the Source button when the Auto Source mode is set to Off, you can manually select the input signal. Select On to auto detect the available input signals. If you press the Source button when the projector is on, it automatically finds the next available input signal. AUTO KEYSTONE—Select On to automatically adjust image distortion caused by tilting the projector.
buttons on the control panel simultaneously for 2 seconds. You can also and buttons invoke the test pattern 2 by pressing and holding down on the control panel simultaneously for 2 seconds. Test Pattern 1: Test Pattern 2: FACTORY RESET—Select and press to reset all settings to its factory default. The below warning message appears: Reset items include both computer sources and Video source settings.
LAN SETTINGS—Select and press to activate LAN settings. The LAN settings menu provides the following options: WIRELESS AND LAN—Select Enabled to activate the Wireless and LAN function. DHCP—If a DHCP server exists in the network to which the projector is connected, the IP address will automatically be acquired when you select DHCP On. If DHCP is Off, manually set the IP Address, Subnet Mask, and to select the number of IP address, Subnet and Gateway. Use Mask, and Gateway.
3. After the IP Address, Subnet Mask, Gateway, and DNS is set up, button to store the settings. select Store and press 4. If you select Store without pressing the Enter button, the system will keep the original settings. RESET—Press to reset network configuration. to activate wireless settings. The wireless WIRELESS SETTINGS—Select and press settings menu provides the following options: WIRELESS—If your projector has been installed the wireless dongle, this option is the Connected.
3. After the IP Address, Subnet Mask, Gateway, and DNS is set up, button to store the settings. select Store and press 4. If you select Store without pressing the Enter button, the system will keep the original settings. RESET—Press to reset wireless configuration. to activate the menu settings. The menu MENU SETTINGS—Select and press settings consists of the following options: MENU POSITION—Allows you to change the position of the OSD menu on the screen.
a Go to Menu Settings, press the password settings. and then select Password to Enabled b Enabling the Password function will pop up a change screen. Key in a . 4-digit number from the screen and press S320wi Password screen S320 Password screen c To confirm, enter the password again. d If the password verification is successful, you may resume with accessing the projector's functions and its utilities. 2 If you have entered an incorrect password, you will be given another two chances.
CHANGE PASSWORD—Key in the original password. Then, enter the new password and confirm the new password again. S320wi Change Password screen S320 Change Password screen to activate power settings.
QUICK SHUTDOWN—Select On to turn off the projector with a single press of the Power button. This function allows the projector to quickly power off with an accelerated fan speed. Slightly higher acoustic noise is expected during quick power off. NOTE: Before you turn on the projector again, wait for 60 seconds to allow the internal temperature to stabilize. The projector will take a longer time to turn on if you try to power on immediately.
INTERACTIVE SETTINGS—Select and press to activate Interactive settings. The Interactive settings menu provides the following options: NOTE: The S320 projector must be installed with a Interactive Module Kit if you want to use the Interactive feature. Refer to "Installing the Optional Interactive Module Kit" on page 15. INTERACTIVE—Default option is On. Select Off to disable the Interactive Pen function. NOTE: 1. Ensure that the Interactive Pen is connected.
POINTER MOTION—Allows you to select the Pointer Motion mode: Normal, Draw, and Stable. •Normal — In the Normal mode, pressing the Left button of the Interactive Pen holds the position of the pointer for a moment. This mode is best to use the Interactive Pen like a mouse, i.e., for left click and double click function. •Draw — In Draw mode, the position can move freely for drawing. This mode is best for drawing or writing on the screen.
•Switch Windows (Alt + Tab) — Function as toggling among windows, acting as the keyboard shortcut Alt + Tab. •Esc—Function as the keyboard Esc button. •Show Desktop (Cmd + D) — Function as showing desktop, minimizing all windows. •Open Windows Explorer (Cmd + E) — Set the function as opening the Windows Explorer. •Middle Mouse — Set the function as the scroll wheel of the mouse. •Double Click — Set the function as double-clicking. •Disable — Disable the Function button.
INFORMATION—Allows you to view the Pen 1 or Pen 2 information. INFORMATION—The information menu displays the current S320 or S320wi projector settings. LANGUAGE Allows you to set the language for the OSD. Press menu.
HELP If you encounter problems with your projector, you can access the help menu for troubleshooting.
Wireless Networking Installation NOTE: Your computer must have the following minimum system requirements: Operating System: • Windows Microsoft Windows XP™ Home or Professional Service pack 2 (32-bit recommended), Windows Vista 32-bit, and Windows® 7 Home or Professional 32-bit or 64-bit • MAC MacBook and above, MacOS 10.5 and above Minimum Hardware: a Intel Dual Core 1.
Enable Wireless on the Projector In order to use your projector wirelessly, you need to complete the steps below: 1 Install the optional wireless module kit (optional in S320). See "Installing the Optional Wireless Module Kit" on page 14. NOTE: Wireless module kit embedded for S320wi. 2 Connect the power cable to the wall outlet and press the power button. 3 Press the Menu button on your projector control panel or remote control.
The Wireless Guide Screen shown below appears: 5 Take note of the LOGIN CODE, NETWORK NAME (SSID), and IP ADDRESS. You will need these information to log in in later. Install the Wireless Application Software on Your Computer In order to use your wireless projector, you must install the software on your system. 6 Connect your computer to the S320 or S320wi wireless network. NOTE: • Your computer must have wireless network function to detect the connection.
• When you connect to the S320 or S320wi wireless network, you will lose wireless connectivity with other wireless networks. NOTE: Remember to turn off all proxies. (In Microsoft® Windows Vista: Click Control Panel J Internet Options J Connections J LAN Settings) 7 Open your internet browser. You will be automatically directed to the S320 or S320wi Web Management web page. NOTE: If the web page does not load automatically, enter the IP address (default IP address is 192.168.100.
8 The S320 or S320wi Web Management page opens. For first-time use, click Download. 9 Select the appropriate operating system, then click Download.
10 Click Run to proceed with the one-time installation of the software. NOTE: You may choose to save the file and install it at a latter time. To do this, click Save. NOTE: Audio projection function need install extra driver only in Windows XP. If your computer does not have the driver installed, a pop-up message will appear on-screen prompting you to install the required driver. You can download the “Audio Projection Driver” from the Dell Support site at support.dell.com.
Launch the Wireless Application Once the installation is complete, the S320 or S320wi wireless application will launch and search automatically. If the program not launch automatically, you can double-click the or icon on the desktop to start the application. Login To communicate with your projector, enter the Login Code provided in Step 6 of Wireless Networking Installation, then click OK. NOTE: If the IP Address is not detected, enter the IP Address displayed at the bottom left corner of the screen.
Understanding the Buttons After a successful log in, the following screen appears: 1 2 1 2 3 3 Item Description Status Bar Displays IP and LOGIN CODE information. Menu Click to activate the application menu. Minimize button Click to minimize the application. Close button Click to exit the application. Controls Toolbar Full screen Click to project the image in full screen. Split 1 Click to project the image in the upper left corner of the screen.
• To stop the presentation, click . NOTE: WLAN environment using 802.11g connection, and no screen stretching. NOTE: Your computer will not enter S1 (standby mode) / S3 (sleep mode) / S4 (hibernate mode) when running a wireless, USB Display, or USB Viewer presentation. Using the Menu Click to display the menu. WEB MANAGEMENT—Click to open the Web Management page. See "Managing the Projector From Web Management (for Wireless Network)" on page 95.
Presentation to Go (PtG) Installation Minimum system requirements to install PtG are as follow: Operating System: - Windows Microsoft Windows XP™ Home or Professional Service pack 2/3 (32-bit recommended), Windows® Vista 32-bit, or Windows® 7 Home or Professional 32-bit or 64-bit - Office 2003 or Office 2007 NOTE: Presentation to Go (PtG) installation steps are the same for the S320 and S320wi models.
PtG Viewer System will stay in this page when ready.
PtG/Photo Function Introduction Show valid PtG and Photo files which are stored in the USB disk. NOTE: If only one disk is detected, the system will skip this step.
Photo Overview NOTE: Supports 14 languages of photo files name format (Languages: English, Dutch, French, German, Italian, Japanese, Korean, Polish, Portuguese, Russian, Simplified Chinese, Spanish, Swedish, and Traditional Chinese). Buttons Introduction Use the up, down, and left buttons to navigate and control panel or remote control to select.
Install the PtG Converter Application Software on Your Computer Please follow the on-screen instructions to complete the setup. NOTE: You can download the "PtG Converter - Lite" in the Dell Support website at support.dell.com. Using the PtG Converter 1 Launch the "PtG Converter - Lite.exe" or double-click the desktop to start the application. 2 Click icon on the to select a PowerPoint file and start conversion.
3 Click Browse button to select the storage location and then press OK. NOTE: 1 If your computer does not have MS PowerPoint installed, file convert will fail. 2 PtG converter only supports up to 20 pages. 3 PtG converter only supports conversion of .ppt files to .PtG files.
Audio Projection Installation Audio Projection only supports the Wireless Display and LAN Display input source. Minimum system requirements as follow: Operating System: • Windows Microsoft Windows XP™ Home or Professional Service pack 2/3 (32-bit recommended), Windows Vista 32-bit, or Windows® 7 Home or Professional 32-bit or 64-bit • MAC MacBook Pro and above, MacOS 10.5 and above Minimum Hardware: a Intel® Core™ i5-460 MHz (2.53 GHz/Turbo 2.
NOTE: Ports / Protocol for connection to the projector for projection via Ethernet: 90 UDP: 1047, (backup: 1048, 1049) TCP: (backup: 389, 8080, 21) 3268, 515, 1688, 1041 Using Your Projector
Enable Wireless or LAN on the Projector 1 Install the optional wireless module kit (optional in S320). See "Installing the Optional Wireless Module Kit" on page 14. NOTE: If you select install the LAN module kit (optional), see "Installing the Optional RJ45 Kit" on page 16. 2 Connect the power cable and turn on the projector by pressing the power button.
The Wireless Guide Screen shown below appears: 4 Take note of the LOGIN CODE, NETWORK NAME (SSID), and IP ADDRESS. You will need these information to log in later. Install the Wireless Application Software on Your Computer 5 "Wireless Application Software" is required if the Wireless or LAN is used for the Audio Projection set-up. Please download and install the software the first time you use Audio Projection. If it is already installed, skip Step 5 - 6.
NOTE: If the LAN is used for audio projection, connect the LAN cable to the projector and the computer. Launch the Wireless Application 7 Once the installation is complete, the program will launch automatically. Or you can double-click the or icon on the desktop to start the application. NOTE: 1 When you select the LAN for projection, click "Skip". 2 When you select the Wireless for projection, select the Dell S320 Wireless or Dell S320wi Interactive, and the click "OK".
Login 8 To communicate with your projector, enter the Login Code (see Step 4), and then click OK. NOTE: If the IP Address is not detected, enter the IP Address displayed at the bottom left corner of the wireless screen. 9 You are now logged into the S320 or S320wi Wireless Application. Click the "Play" button in the application to starting the LAN or wireless projection. NOTE: You may use the controls to either project in full screen mode or in split screen mode.
Managing the Projector From Web Management (for Wireless Network) Configuring the Network Setting If the projector is connected to a network, you can access the projector using a web browser. For configuring the network setting, refer to "LAN Settings" on page 63. Accessing Web Management Use Internet Explorer 5.0 and above or Firefox 1.5 and above and enter the IP address. You can now access Web Management and manage the projector from a remote location.
Download the Wireless Application Software See also "Wireless Networking Installation" on page 74. Click the Download button of the corresponding operating system of your computer.
Conference Control This allows you to host conference presentations from different sources without using projector cables and lets you control how each presentation will appear on screen. NOTE: Without Conference Play Control, the last user to hit the "Play" button on the application will take control of the full-screen projection. Computer Name: Lists the computers logged for conference control. Play Control: Click the buttons to control how each computer’s projection will appear on screen.
Managing Properties Admin An administrator password is required to access the Admin page. • 98 Admin Password: Enter the administrator password and then click Login. The default password is "admin". To change the password, see "Change Passwords" on page 103.
System Status Displays the Network Status, Connection Status, and Projector Status information.
Network Status See OSD section on page 63. IP Setup • Choose Obtain an IP address automatically to assign an IP address to the projector automatically, or Use the following IP address to assign an IP address manually. DHCP Server Setup • Choose Auto to automatically set up the Start IP, End IP, Subnet Mask, Default Gateway, and DNS Server address from a DHCP server, or Disable to disable this function.
SSID: Up to maximum length of 32 characters. Encryption: You can Disable WPA key or select one of 64-bit or 128-bit in ASCII or HEX string. Key: If Encryption is enabled, you have to set key value according to the Encryption mode you selected. RADIUS Server Setup • Set up the IP address, Port, and Key information. GateKeeper • There are three options: All Pass: Allow users to access the office network via the wireless projector.
Projection Setup Projection Setup • Resolution: Allows you to select the resolution. Options are: XGA (1024 x 768) and WXGA (1280 x 800). • Login Code: Select how you want the login code to be generated by the projector. There are three options: • Disable: Login code will not be required when logging in to the system. • Random: Default is Random. Login code will be randomly generated. • Use the following code: Enter a 4-digit code. This code will be used to log in to the system.
Change Passwords This page allows you to change the administrator password. • Enter New Password: Enter the new password. • Confirm New Password: Enter the password again and click Apply. NOTE: Contact Dell if you forget your administrator password.
Reset to Default Click the Apply button to restore the wireless/network setup to its factory default settings.
Firmware Upgrade Use the Firmware Upgrade page to update your projector’s wireless firmware. NOTE: Please disable and enable wireless/network using the OSD to restart the network card for the projector after firmware upgrade is successful. To start firmware update, follow these steps: 1 Press Browse to select the file to update. 2 Click the Update button to start. Wait while the system updates the firmware in your device.
Projector Control Panel Projector Information • Projector Status: There are five states: Lamp On, Standby, Power Saving, Cooling, and Warming up. Click Refresh to refresh the status and control settings. • Power Saving: Power Saving can be set to Off, 30, 60, 90, or 120 minutes. For more information, see "Power Saving" on page 68. • Alert Status: There are three alert states: Lamp warning, Low lamp life, and Temperature warning.
Image Control • Projector Mode: Allows you to select the projector mode, depending on how the projector is mounted. There are four projection modes: Front Projection-Desktop, Front Projection-Wall Mount, Rear Projection-Desktop, and Rear Projection-Wall Mount. • Source Select: The Source Select menu allows you to select your projector's input source. You can select VGA-A, VGA-B, S-Video, Composite Video, HDMI, Wireless Display, USB Display, or USB Viewer.
Alert Setting E-mail Alert • E-mail Alert: You can set whether to be notified by email (Enable) or not (Disable). • To/Cc/From: You can enter email address of sender (From) and recipients (To/Cc) to receive notification when an abnormality or warning occurs. • Subject: You can enter the subject line of the email. Click the E-mail Alert Test button to test the e-mail alert settings. SMTP Setting • Out going SMTP server, User name, and Password should be provided by your network administrator or MIS.
Reboot System Click Reboot to reboot the system. Crestron For Crestron function.
Managing the Projector From Web Management (Network RJ45 Kit is Optional for S320) Configuring the Network Setting If the projector is connected to a network, you can access the projector using a web browser by configuring the network setting (TCP/IP). When using the network function, the IP address should be unique. For configuring the network setting, refer to "LAN Settings" on page 63. The RJ45 kit is not shipped with your S320 projector. You can purchase it on the Dell website at www.dell.com.
Managing Properties Home • Access the Web Management Home page by entering the projector’s IP address at the web browser. See "LAN Settings" on page 63. • Language: Allows you to set the language for web management.
Network Settings • Set up the Model Name, Projector Name, Location, and Contact information (up to 21 characters for each field). Press Save to store the settings. • Choose DHCP to assign an IP address to the projector from a DHCP server automatically, or Manual to assign an IP address manually. • Set up the IP Address, Device ID, and Port information on the Crestron function.
Projector Status and Control Page • Projector Status: There are 5 status: Lamp On, Standby, Power Saving, Cooling, and Warming up. Click the Refresh button to refresh the status and control settings. • Power Saving: Power Saving can be set to Off, 30, 60, 90, or 120 minutes. Refer to page 68. • Alert Status: There are three error status: Lamp warning, Low lamp life, and Temperature warning. Your projector might lock up in protection mode if any of the alerts is activated.
- Bright: Maximum brightness and contrast. - Movie: For viewing movie & photo. - sRGB: Provide a more accurate color representation. - Custom: User preferred settings. • Blank Screen: You can select On or Off. • Aspect Ratio: Allows you to select the aspect ratio to adjust how the image appears. • Brightness: Select value to adjust the brightness of the image. • Contrast: Select value to adjust the display contrast. Click the Auto Adjust button to adjust the settings automatically.
E-mail Alert • E-mail Alert: You can set whether to be notified by email (Enable) or not (Disable). • To/Cc/From: You can enter email address of sender (From) and recipients (To/Cc) to receive notification when an abnormality or warning occurs. • Out going SMTP server, User name, and Password should be provided by your network administrator or MIS. • Alert Condition: You can select the abnormalities or warnings to be notified by email.
Password Setting Use Password Setting to set up an administrator password to access the Web Management. When enabling password for the first time, set the password before enabling it. When the password function is enabled, the administrator password will be required for accessing the Web Management. • New Password: Enter new password • Confirm Password: Enter password again and submit • Write Community: Set security for SNMP. Enter password and submit.
Login Page • Administrator Password: Enter the Administrator Password and click Login.
Firmware Upgrade Use the Firmware Update page to update your projector’s firmware. Press Update to start. • 118 Please wait till the count reaches 0.
• Wait for 3 seconds and it will proceed to the next step automatically. • Select the file to upgrade and click the Upgrade button. When upgrading is in progress, the Cancel button is disabled.
• Please wait till the count reaches 0. • When upgrade is complete, please click the Re Login button to go back to the Web Management Home Page. Crestron For Crestron function.
FAQS: I would like to remotely access the projector via the Internet. What is the best setting for the browser? To have the best setting for the browser, please follow the below steps: 1 Open Control Panel Internet Options General tab Temporary Internet Files Settings Select Every visit to the pages. 2 Some firewall or anti-virus may block the HTTP application. If possible, turn off the firewall or anti-virus.
Why am I unable to access the SMTP server? Why am I unable to receive the test alert email even though the projector already indicates the test mail is already sent? 122 Using Your Projector 1 Check with your MIS or network administrator whether the SMTP server function is open for the projector and the IP assigned to the projector is allowed to access the SMTP server. The projector’s SMTP socket port number is 25, this cannot be changed.
Firewall Configuration and FAQ Q: Why can’t I access the Web Management Page? A: Your computer’s firewall configuration may prevent you from accessing the Web Management Web Page. Please refer to the following configuration settings: Firewall Protection McAfee Security Center Norton AntiVirus Sygate Personal Firewall Configuration 1 Launch McAfee Security Center (Start > All Programs > McAfee > McAfee Security Center). 2 On the personal firewall plus tab, click View the Internet Applications List.
Firewall Protection Windows Firewall Zone Alarm 124 Configuration 1 Open Windows Firewall (Start > All Programs > Control Panel). Double-click on Windows Firewall. 2 On the General tab, uncheck Don’t allow exceptions. 3 On the Exceptions tab, click the Add Program... button. 4 Find and select Dell S320 or S320wi Projector from the list of programs, then click OK. 5 Click OK to confirm exceptions settings. 1 Open Zone Alarm Firewall (Start > All Programs > Zone Labs > Zone Labs Center).
Make Application Token The Application Token lets you perform Plug and Show using a USB token. NOTE: This is only application to S320wi or a wireless-enabled S320. 1 From the application software, click 2 The following screen appears. Click Next. 3 Plug a flash drive into any of the USB ports on your computer. Select the drive from the list, then click Next. 4 Click Finish to close the wizard. > Make Application Token.
Troubleshooting Your Projector 4 If you experience problems with your projector, see the following troubleshooting tips. If the problem persists, contact Dell™ (see Contacting Dell™ on page 144). Problem Possible Solution No image appears on the screen • Ensure that you have chosen the correct input source on the INPUT SOURCE menu. • Ensure the external graphics port is enabled. If you are using a Dell™ laptop (Fn+F8). For computer, press other computers, see your respective documentation.
Problem (continued) Partial, scrolling, or incorrectly displayed image Possible Solution (continued) 1 Press the Auto Adjust button on the remote control or the control panel. 2 If you are using a Dell™ laptop computer, set the resolution of the computer to WXGA (1280 x 800): a Right-click the unused portion of your Microsoft® Windows® desktop, click Properties, and then select Settings tab. b Verify that the setting is 1280 x 800 pixels for the external monitor port. c Press (Fn+F8).
Problem (continued) Image is out of focus Possible Solution (continued) 1 Adjust the focus ring on the projector lens. 2 Ensure that the projection screen is within the required distance from the projector 1.31 ft [0.4 m] to 12.5 ft [3.82 m]. The image is stretched when displaying a 16:9 DVD The projector automatically detects the input signal format. It will maintain the aspect ratio of the projected image according to input signal format with an Original setting.
Problem (continued) Possible Solution (continued) TEMP light is solid amber The projector has overheated. The display automatically shuts down. Turn the display on again after the projector cools down. If the problem persists, contact Dell™. TEMP light is blinking amber If the projector fan fails, the projector will automatically shut down. Try to clear the projector mode by pressing and holding the Power button for 10 seconds. Please wait for about 5 minutes and try to power up again.
Troubleshooting your Interactive Pen Problem (continued) Possible Solution (continued) Cannot use the Pen or cannot connect the Pen • Check if the input source is PC (VGA, HDMI, Wireless and LAN source) • Check if the Interactive function is turned On. (Menu -> Advanced Settings -> Interactive Settings -> Interactive) • Check if the Connection option is set correctly.
Cannot use the Pen in 3D source. a Supports the VGA and HDMI output signal at 120 Hz only. b Composite/S-Video output signal at 60 Hz and Component output signal are not supported. Cannot use the Pen in Composite Video or S-Video source. Composite Video or S-Video source is not supported. Cannot use Nib If the Nib is worn out, replace with a new Nib. When using USB Display, can Wireless USB function be used? Wireless USB function is not supported.
Guiding Signals Control Buttons Projector Status Description Indicator Power TEMP (Amber) LAMP (Amber) Standby mode Projector in Standby mode. Ready to power on. BLUE Flashing OFF OFF Warming up mode Projector takes some time to warm up and power on. BLUE OFF OFF Lamp on Projector in Normal mode, ready to display an image. Note: The OSD menu is not accessed. BLUE OFF OFF Cooling mode Projector is cooling to shutdown.
Interactive Pen LED Guiding Signals PEN Status Description Normal Mode 1 Pen faces the screen with the link. Normal Mode 2 Pen doesn’t faces the screen but with the link. Search for Open network mode When Pen searching for open network (Green LED flashing twice every 2 sec). After holding down Nib and Function button for 5 secs, the pen will change to this mode. Search for Fixed When Pen searching for network mode fixed network.
Changing the Lamp CAUTION: Before you begin any of the procedures in this section, follow the Safety Instructions as described on page 11. Replace the lamp when the message "Lamp is approaching the end of its useful life in the operation. Replacement suggested! www.dell.com/lamps" appears on the screen. If this problem persists after replacing the lamp, contact Dell™. For more information, see Contacting Dell™on page 144.
9 Reset the lamp usage time by selecting "Yes" for Lamp Reset in the OSD Power Settings of the Advanced Setting menu (see Power Settings of the Advanced Setting menu on page 67). When a new lamp module has been changed, the projector will automatically detect and reset the lamp hours. CAUTION: Lamp Disposal (for the US only) LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE, OR FEDERAL LAWS. FOR MORE INFORMATION, GO TO WWW.DELL.
Specifications Light Valve 0.55" XGA S450 DMD, DarkChip3™ Brightness 3000 ANSI Lumens (Max.) Contrast Ratio 2200:1 Typical (Full On/Full Off) Uniformity 80% Typical (Japan Standard - JBMA) Number of Pixels 1024 x 768 (XGA) Aspect Ratio 4:3 Displayable Color 1.07 billion colors Color Wheel Speed 2X 5 1 X for 3D Display Projection Lens F-Stop: F/ 2.8 Effective Focal length=7.26 mm Fixed Lens, Digital Zoom only Throw ratio =0.
Power Consumption Normal mode: 305 W ± 10% @ 110 Vac Eco mode: 225 W ± 10% @ 110 Vac Power saving mode: <15 W (Wireless and Network On) Standby mode: < 0.5 W (Network Off, and VGA_OUT Off, and Wireless Off) Audio 1 speaker x 5 watt RMS Noise Level 35 dB(A) Normal mode, 31 dB(A) Eco mode Projector Weight 7 lb (3.18 kg) Interactive Pen Weight 0.13 lb (60 g) (with Li-ion battery) Projector Dimensions (W x H x D) 11.3 x 3.6 x 8.7 inches (288 x 92 x 220 mm) 11 .3 "(2 88 mm ) 3.6"(92 mm) 8.
Environmental Operating temperature: 5 ºC - 35 ºC (41 ºF- 95 ºF) Humidity: 80% maximum Storage temperature: 0 ºC to 60 ºC (32 ºF to 140 ºF) Humidity: 90% maximum Shipping temperature: -20 ºC to 60 ºC (-4 ºF to 140 ºF) Humidity: 90% maximum I/O Connectors (for S320/S320wi) Power: One AC power socket (3-pin - C14 inlet) VGA input: Two 15-pin D-sub connectors (Blue), VGA-A and VGA-B, for analog RGB/Component input signals. VGA output: One 15-pin D-sub connector (Black) for VGA-A loop through.
Wireless Dongle (embedded for S320wi) Wireless Standard: IEEE802.11b/g/n Wireless: One WiFi USB (type A) connector for supporting wireless dongle (Embedded WiFi, USB interface). OS environment: Windows 7/Vista/XP/2000, MAC OS X Support: Presentation slides and projector control. Allow connection up to 30 users at the same time. 4-to-1 split screen. Allows four presentation slides to be projected on screen. Conference Control mode. Supports Audio Projection (driver installation may be required.
NOTE: All optical performance is measured under the condition of the Interactive Pen off within user manual or product specification.
RS232 Pin Assignment RS232 Protocol • Communication Settings Connection settings Value Baud Rate 19,200 Data Bits 8 Parity None Stop Bits 1 • Command types To pop up the OSD menu and adjust the settings.
Compatibility Modes (Analog/Digital) 142 Resolution Refresh Rate (Hz) Hsync Frequency (KHz) Pixel Clock (MHz) 640 x 350 70.087 31.469 25.175 640 x 480 59.940 31.469 25.175 640 x 480 p60 59.940 31.469 25.175 720 x 480 p60 59.940 31.469 27.000 720 x 576 p50 50.000 31.250 27.000 720 x 400 70.087 31.469 28.322 640 x 480 75.000 37.500 31.500 848 x 480 60.000 31.020 33.750 640 x 480 85.008 43.269 36.000 800 x 600 60.317 37.879 40.000 800 x 600 75.000 46.875 49.
800 x 600 119.972 76.302 73.250 1024 x 768 119.989 97.551 115.500 1280 x 720 120.000 101.563 146.250 NOTE: The refresh rate of the timings at 120 Hz (gray area) can supported in 3D mode.
Contacting Dell For customers in the United States, call 800-WWW-DELL (800-999 3355). NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog. Dell™ provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area.
Contacting eInstruction eInstuction provides phone based and online technical support options. Availability varies by country, but an e-mail to techsupport@einstruction.com can be directed appropriately for users in any country. USA eInstruction Software Technical Support Phone: 480-443-2214 or 800-856-0732 Email: Techsupport@einstruction.com International eInstruction Software Technical Support, EMEA Phone: +33 1 58 31 1065 Email: EU.Support@einstruction.
Contacting Crestron Crestron provides phone based and online technical support options. Availability varies by country, but an e-mail to getroomview@crestron.com can be directed appropriately for users in any country. Technical Support In the US and Canada Phone: 877-516-5394 Email: roomviewsupport@crestron.com Outside the US and Canada Phone: +1 201-367-1037 Email: roomviewsupport@crestron.
Appendix: Glossary ANSI Lumens — A standard for measuring the brightness. It is calculated by dividing a square meter image into nine equal rectangles, measuring the lux (or brightness) reading at the center of each rectangle, and averaging these nine points. Aspect Ratio — The most popular aspect ratio is 4:3 (4 by 3). Early television and computer video formats are in a 4:3 aspect ratio, which means that the width of the image is 4/3 times the height.
dB — decibel — A unit used to express relative difference in power or intensity, usually between two acoustic or electric signals, equal to ten times the common logarithm of the ratio of the two levels. Diagonal Screen — A method of measuring the size of a screen or a projected image. It measures from one corner to the opposite corner. A 9 FT high, 12 FT wide, screen has a diagonal of 15 FT.
Minimum Distance — The closest position that a projector can focus an image onto a screen. NTSC — National Television Standards Committee. North American standard for video and broadcasting, with a video format of 525 lines at 30 frames per second. PAL — Phase Alternating Line. A European broadcast standard for video and broadcasting, with a video format of 625 lines at 25 frames per second. Reverse Image — Feature that allows you to flip the image horizontally.
Index A Adjusting the Projected Image 31 Adjusting the Projector Height 31 lower the projector Tilt adjustment wheel 31 Adjusting the Projector Focus 32 Focus ring 32 C Changing the Lamp 134 Connecting the Projector Composite Video cable 23 Connecting a Computer with a RS232 cable 19, 20 Connecting with a Component Cable 24 Connecting with a Composite Cable 23 Connecting with an HDMI Cable 25 Connecting with an S-video Cable 22 HDMI cable 25, 26, 27 Power cord 17, 18, 19, 20, 22, 23, 24, 25, 26, 27 RS232 c
13 Contact Dell 7, 129, 134 Control Panel 35 D Dell contacting 144 I Interactive Pen Control panel 11 Firmware upgrade connector 11 LED indicators 11 Mini USB charge connector 11 Photo sensor 11 Power switch 11 Replaceable nib 11 Wrist strap holder 11 O On-Screen Display 51 ADVANCED SETTINGS 55 AUDIO INPUT 54 AUTO ADJUST 52 BRIGHTNESS/CONTRAST 53 HELP 73 INPUT SOURCE 51 INPUT SOURCE MULTIPLE DISPLAY 52 LANGUAGE 72 Main Menu 51 VIDEO MODE 53 VOLUME 54 P phone numbers 144 Powering On/Off the Projector Pow
Displayable Color 136 Environmental 138 I/O Connectors 138 Light Valve 136 Noise Level 137 Number of Pixels 136 Power Consumption 137 Power Supply 136 Projection Distance 136 Projection Lens 136 Projection Screen Size 136 RS232 Protocol 141 Uniformity 136 Video Compatibility 136 Weight 137 support contacting Dell 144 T telephone numbers 144 Troubleshooting 126 Contact Dell 126 152 Index
