Dell S2722DC Monitor User’s Guide Model: S2722DC Regulatory model: S2722DCb
NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Copyright © 2021 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . 6 About your monitor . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Product features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Identifying parts and controls . . . . . . . . . . . . . . . . . . . . . . 9 Front view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Side View .
Maintenance guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Cleaning your monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Setting up the monitor . . . . . . . . . . . . . . . . . . . . . . 28 Setting up the stand. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Connecting your monitor . . . . . . . . . . . . . . . . . . . . . . . . . 31 Connecting the USB Type-C and power cables . . . . . . . . . . . . . . .
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Self-test. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Built-in diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Common problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Product specific problems . . . . . . . . . . . . . . . . . . . . . . . . Universal Serial Bus (USB) specific problems . . . . . . . . . Speakers Specific Problems . . . . . . . . . . . . . . . . . .
Safety instructions CAUTION: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards. • Place the monitor on a solid surface and handle it carefully. The screen is fragile and can be damaged if dropped or hit sharply. • Always be sure that your monitor is electrically rated to operate with the AC power available in your location. • Keep the monitor in room temperature.
About your monitor Package contents Your monitor ships with the components shown in the table below. If any component is missing, contact Dell. For more information, see Contact Dell. NOTE: Some items may be optional and may not ship with your monitor. Some features may not be available in certain countries. NOTE: If you are connecting a stand that you purchased from any other source, follow the setup instructions that are included with the stand.
USB Type-C to USB Type-C 3.2 Gen 1 cable (cable length: 1.80 M) • Quick Setup Guide • Safety, Environmental, and Regulatory Information Product features The Dell S2722DC monitor has an active matrix, Thin-Film Transistor (TFT), Liquid Crystal Display (LCD) and LED backlight. The monitor features include: • 68.47 cm (26.95 in.) viewable area (measured diagonally). • 2560 x 1440 (16:9) resolution, plus full-screen support for lower resolutions.
• Optimize eye comfort with a flicker-free screen and ComfortView feature which minimizes blue light emission. WARNING: The possible long-term effects of blue light emission from the monitor may cause damage to the eyes, including eye fatigue, digital eye strain, and so on. ComfortView feature is designed to reduce the amount of blue light emitted from the monitor to optimize eye comfort.
Side View Back view Back view with monitor stand Label Description Use 1 VESA mounting holes (100 mm x 100 mm - behind attached VESA Cover) Wall-mount the monitor using VESAcompatible wall mount kit (100 mm x 100 mm).
2 Barcode, serial number, and Service Tag label Refer to this label if you need to contact Dell for technical support. The Service Tag is a unique alphanumeric identifier that enables Dell service technicians to identify the hardware components in your monitor and access warranty information. 3 Stand-release button Releases stand from the monitor. 4 Regulatory label Lists the regulatory approvals. 5 Cable-management slot Use to organize cables by inserting them through the slot.
5 USB Type-C upstream Connect the USB Type-C cable that came with port your monitor to the computer. This port supports USB Power Delivery, Data, and DisplayPort video signal. The SuperSpeed USB 5 Gbps (USB 3.2 Gen 1) Type-C port supports Alternate Mode DP1.2 with a maximum resolution of 2560 x 1440 at 75 Hz, PD 20 V/ 3.25 A, 15 V/3 A, 9 V/3 A, 5 V/3 A. NOTE: USB Type-C is not supported on versions of Windows prior to Windows 10. 6 Line-out port Connect your speakers.
Monitor specifications Model S2722DC Screen type Active matrix - TFT LCD Panel technology IPS Aspect ratio 16:9 Viewable image Diagonal 684.67 mm (26.95 in.) Width (active area) 596.74 mm (23.49 in.) Height (active area) 335.66 mm (13.21 in.) Total area 200302.79 mm2 (310.47 in.2) Pixel pitch 0.2331 x 0.
Color depth 16.7 million colors (8 bit) Color gamut sRGB 99% (typical) Connectivity • 1 x USB Type-C upstream port (Alternate mode with DisplayPort 1.2, Power Delivery up to 65 W)* • 1 x SuperSpeed USB 5 Gbps (USB 3.2 Gen 1) with BC1.2 charging capability at 2 A (maximum) • 1 x SuperSpeed USB 5 Gbps (USB 3.2 Gen 1) downstream port • 2 x HDMI ports version 1.4 (HDCP 1.4) • 1 x audio line-out port Border width (edge of monitor to active area) Top 7.42 mm Left/Right 7.43 mm/7.43 mm Bottom 21.
Resolution specifications Model S2722DC Horizontal scan range 30 kHz to 114 kHz (automatic) Vertical scan range 48 Hz to 75 Hz (automatic) Maximum preset resolution 2560 x 1440 at 75 Hz Supported video modes Model S2722DC Video display capabilities (HDMI 480p, 480i, 576p, 576i, 720p, 1080i, 1080p, & USB Type-C alternate mode) QHD Preset display modes HDMI Display mode Horizontal frequency (kHz) Vertical frequency (Hz) Pixel clock (MHz) Sync polarity (Horizontal/ Vertical) 720 x 400 31.
VESA, 1920 x 1080 67.50 60.00 148.50 +/+ 2048 x 1080 66.70 60.00 147.18 +/- 2560 x 1440 88.79 59.95 241.50 +/- 2560 x 1440 111.00 74.98 298.50 +/- Horizontal frequency (kHz) Vertical frequency (Hz) Pixel clock (MHz) Sync polarity (Horizontal/ Vertical) 720 x 400 31.47 70.08 28.32 -/+ VESA, 640 x 480 31.50 60.00 25.20 -/- VESA, 640 x 480 37.50 75.00 31.50 -/- VESA, 800 x 600 37.90 60.30 40.00 +/+ VESA, 800 x 600 46.90 75.00 49.50 +/+ VESA, 1024 x 768 48.
Electrical specifications Model S2722DC Video input signals • HDMI 1.4, 600 mV for each differential line, 100 Ω input impedance per differential pair • USB Type-C (Alternate mode with DisplayPort 1.2), 90 Ω input impedance per differential pair AC input voltage/ frequency/current 100 VAC to 240 VAC / 50 Hz or 60 Hz ± 3 Hz / 2 A (typical) Inrush current • 120 V: 40 A (Max.) at 0°C (cold start) • 240 V: 80 A (Max.) at 0°C (cold start) Power consumption • 0.2 W (Off mode)1 • 0.
Accordingly, the customer should not rely upon this information in making decisions about electrical tolerances or otherwise. No warranty as to accuracy or completeness is expressed or implied. Physical characteristics Model S2722DC Signal cable type • Digital: HDMI, 19 pins (cable not included) • Digital: Universal Series Bus: Type-C, 24 pins NOTE: Dell monitors are designed to work optimally with the video cables that are shipped with your monitor.
Weight without stand assembly (For wall mount or VESA mount considerations - no cables) 5.40 kg (11.91 lb) Weight of stand assembly 1.50 kg (3.31 lb) Environmental characteristics Model S2722DC Compliant standards • RoHS-compliant • BFR/PVC reduce monitor (Its circuit boards are made from BFR/PVC-free laminates.
Pin assignments HDMI connector Pin number 19-pin side of the connected signal cable 1 TMDS DATA 2+ 2 TMDS DATA 2 SHIELD 3 TMDS DATA 2- 4 TMDS DATA 1+ 5 TMDS DATA 1 SHIELD 6 TMDS DATA 1- 7 TMDS DATA 0+ 8 TMDS DATA 0 SHIELD 9 TMDS DATA 0- 10 TMDS CLOCK+ 11 TMDS CLOCK SHIELD 12 TMDS CLOCK- 13 CEC 14 Reserved (N.C.
Plug and play capability You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so that the system can configure itself and optimize the monitor settings. Most monitor installations are automatic; you can select different settings if desired. For more information about changing the monitor settings, see Operating the monitor.
USB Type-C connector Pin Number Signal Name Pin Number Signal Name A1 GND B1 GND A2 TX1+ B2 TX2+ A3 TX1- B3 TX2- A4 VBUS B4 VBUS A5 CC1 B5 CC2 A6 D+ B6 D+ A7 D- B7 D- A8 SBU1 B8 SBU2 A9 VBUS B9 VBUS A10 RX2- B10 RX1- A11 RX2+ B11 RX1+ A12 GND B12 GND USB 3.
6 SSRX+ 7 GND 8 SSTX- 9 SSTX+ USB ports • 1 USB Type-C (USB 3.2 Gen 1, 5 Gbps) upstream - rear • 1 SuperSpeed USB Type-A (USB 3.2 Gen 1, 5 Gbps) downstream - rear • 1 SuperSpeed USB Type-A (USB 3.2 Gen 1, 5 Gbps) downstream - bottom Power Charging Port - the port with battery icon; supports up to 2 A fast-charging capability if the device is BC1.2 compatible. NOTE: SuperSpeed USB 5 Gbps (USB 3.2 Gen 1) functionality requires a SuperSpeed USB 5 Gbps (USB 3.2 Gen 1)-capable computer.
Ergonomics CAUTION: Improper or prolonged usage of keyboard may result in injury. CAUTION: Viewing the monitor screen for extended periods of time may result in eye strain. For comfort and efficiency, observe the following guidelines when setting up and using your computer workstation: • Position your computer so that the monitor and keyboard are directly in front of you as you work. Special shelves are commercially available to help you correctly position your keyboard.
• Vary your work activities. Try to organize your work so that you do not have to sit and work for extended periods of time. Try to stand or get up and walk around at regular intervals. • Keep the area under your desk clear of obstructions and cables or power cords that may interfere with comfortable seating or present a potential trip hazard.
Handling and moving your display To ensure the monitor is handled safely when lifting or moving it, follow the guidelines mentioned below: • Before moving or lifting the monitor, turn off your computer and the monitor. • Disconnect all cables from the monitor. • Place the monitor in the original box with the original packing materials. • Hold the bottom edge and the side of the monitor firmly without applying excessive pressure when lifting or moving the monitor.
• When lifting or moving the monitor, do not turn the monitor upside down while holding the stand base or stand riser. This may result in accidental damage to the monitor or cause personal injury. Maintenance guidelines Cleaning your monitor CAUTION: Read and follow the Safety instructions before cleaning the monitor. WARNING: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet.
Setting up the monitor Setting up the stand NOTE: The stand is not factory-installed. NOTE: The following steps are specifically for setting up the stand that is shipped with your monitor.If you are attaching a stand that you purchased from any other source, follow the setup instructions that were included with the stand. To set up the monitor stand: 1. Follow the instructions on the flaps of packaging box to remove the stand from the cushion that secures it. 2.
6. Open the protective cover to access the VESA slot on the display. NOTE: Before attaching the stand assembly to the display, ensure that the front plate flap is opened to allow space for assembly. 7. Attach the stand assembly to the display. a. Align and slide the tabs on the stand riser into the VESA slot. b. Press the stand down until it snaps into place.
8. Hold the stand riser with both hands firmly and lift the monitor. Then place the monitor in an upright position on a flat surface. NOTE: Hold the stand riser firmly when lifting the monitor to avoid any accidental damage. 9. Lift the protective cover from the monitor.
Connecting your monitor WARNING: Before you begin any of the procedures in this section, follow the Safety instructions. NOTE: Dell monitors are designed to work optimally with Dell-supplied inbox cables. Dell does not guarantee the video quality and performance if non-Dell cables are used. NOTE: Route the cables through the cable-management slot before connecting them. NOTE: Do not connect all the cables to the computer at the same time. NOTE: The images are for the purpose of illustration only.
Connecting the HDMI and power cables (optional) Organizing your cables While connecting all the necessary cables (see Connecting your monitor for cable attachment), organize all the cables as shown above.
Securing your monitor using Kensington lock (optional) The security lock slot is located at the bottom of the monitor (see Security-lock slot). For more information on using the Kensington lock (sold separately), see the documentation that is shipped with the lock. Secure your monitor to a table using the Kensington security lock. NOTE: The image is for the purpose of illustration only. The appearance of the lock may vary.
Removing the monitor stand NOTE: To prevent scratches on the LCD screen when removing the stand, ensure that the monitor is placed on a soft, clean surface. NOTE: The following steps are specifically for removing the stand that is shipped with your monitor. If you are removing a stand that you purchased from any other source, follow the setup instructions that were included with the stand. To remove the stand: 1. Place the monitor on a soft cloth or cushion. 2.
3. Using a Phillips screwdriver, remove the four screws that secure the display back cover. 4. Install the mounting bracket from the wall mounting kit to the display. 5. Mount the monitor on the wall. For more information, see the documentation that is shipped with the wall mounting kit. NOTE: For use only with UL or CSA or GS-listed wall mount bracket with minimum weight or load bearing capacity of 21.60 kg.
Operating the monitor Turning on the monitor Press the Power button to turn On the monitor. Using the front-panel controls Use the control buttons on the front of the monitor to adjust settings. The following table describes the front-panel buttons: Front-panel button 1 Description Use this button to choose from a list of preset color modes. Shortcut key/ Preset Modes To directly access the Volume adjustment slider.
Use the MENU button to launch the On-Screen Display (OSD). See Accessing the menu system. 3 Menu Use this button to exit the OSD main menu. 4 Exit 5 To turn the monitor on or off. Power (with power light indicator) Solid white light indicates that the monitor is turned on and functioning normally. Blinking white light indicates that the monitor is in Standby Mode. Front-panel button Use the buttons on the front of the monitor to adjust the image settings.
Using the On-Screen Display (OSD) menu Accessing the menu system NOTE: If you change the settings and then either proceed to another menu or exit the OSD menu, the monitor automatically saves those changes. The changes are also saved if you change the settings and then wait for the OSD menu to disappear. 1. Press the button to launch the OSD menu and display the main menu. 2. Press the and buttons to move between the setting options. As you move from one icon to another, the option name is highlighted.
Icon Menu and Submenus Description Brightness/ Contrast Adjusts the brightness and the contrast of the display. Brightness Brightness adjusts the luminance of the backlight. Press the button to increase the brightness and button to decrease the brightness (min. press the 0 / max. 100). Contrast Adjusts the Brightness first, and then adjust the Contrast only if further adjustment is necessary. Press the button to increase the contrast and button to decrease the contrast (min. 0 press the / max.
Input Source Selects between the different video signals that may be connected to your monitor. USB-C Select the USB-C input when you are using the USB Type-C connector. Press the the selection. button to confirm HDMI 1 Select the HDMI 1 or HDMI 2 input when you are HDMI 2 using the HDMI connector. Press the confirm the selection. Auto Select Automatically scans for available input sources. Press the Auto Select for USB-C button to button to confirm the selection.
Color Preset Modes Use Color to adjust the color setting mode. Allows you to choose a preset mode from the list. • Standard: Loads the monitor's default color settings. This is the default preset mode.
Preset Modes • ComfortView: Decreases the level of blue light emitted from the screen to make viewing more comfortable for your eyes. WARNING: The possible long-term effects of blue light emission from the monitor may cause personal injury such as digital eye strain, eye fatigue and damage to the eyes. Using monitor for extended periods of time may also cause pain in parts of body such as neck, arm, back and shoulder. For more information, see Ergonomics. • Movie: Loads color settings ideal for movies.
Input Color Format Allows you to set the video input mode to: • RGB: Select this option if your monitor is connected to a computer or a media player that supports RGB output. • YCbCr: Select this option if your media player supports only YCbCr output. Press the Hue button to confirm the selection. This feature can shift the color of the video image to green or purple. This is used to adjust the desired or flesh tone color. Use '0' to '100'.
Display Use the Display menu to adjust the images. Aspect Ratio Adjusts the image ratio to 16:9, 4:3, or 5:4. Sharpness This feature can make the image look sharper or softer. Use '100'. Response Time Reset Display or to adjust the sharpness from '0' to Allows you to set the Response Time to Normal, Fast, or Extreme. Resets all display settings to the factory preset values.
Audio Volume Adjusts the volume of speakers. Use '100'. Speaker Reset Audio or to adjust the volume level from '0' to Allows you to enable or disable the speaker function. Select this option to restore default audio settings.
Menu Select this option to adjust the settings of the OSD, such as, the languages of the OSD, the amount of time the menu remains on screen, and so on. Language Sets the OSD display to one of the eight languages (English, Spanish, French, German, Brazilian Portuguese, Russian, Simplified Chinese, or Japanese). Transparency Select this option to change the menu transparency by pressing the 100). Timer and buttons (min. 0 / max.
Lock With the control buttons on the monitor locked, you can prevent people from accessing the controls. It also prevents accidental activation in multiple monitors side-by-side setup. • Menu Buttons: All Menu/function buttons (except the Power button) are locked and not accessible by the user. • Power Button: Only the Power button is locked and not accessible by the user. • Menu + Power Buttons: Both the Menu/ function and Power buttons are locked and not accessible by the user.
Personalize Shortcut Key 1 Shortcut Key 2 Allows you to choose a feature from Preset Modes, Brightness/Contrast, Input Source, Aspect Ratio, or Volume and set it as a shortcut key. Power Button LED Allows you to set the power LED indicator on or off to save energy. USB-C Charging The default setting is Off in Off Mode. Selecting On in Off Mode may automatically charge your notebook or mobile devices through the USB Type-C cable even when the monitor is in off mode.
Others Display Info DDC/CI Select this option to adjust the OSD settings, such as DDC/CI, LCD Conditioning, and so on. Displays the monitor's current settings. DDC/CI (Display Data Channel/Command Interface) allows your monitor parameters (brightness, color balance, etc.) to be adjustable via the software on your computer. You can disable this feature by selecting Off. Enable this feature for best user experience and optimum performance of your monitor.
LCD Conditioning Firmware Service Tag Helps reduce minor cases of image retention. Depending on the degree of image retention, the program may take some time to run. You can enable this feature by selecting On. Displays the firmware version of your monitor Displays the service tag of your monitor. This string is required when you look for phone support, check your warranty status, update drivers on Dell's website, etc. Reset Others Resets all settings under the Others menu to the factory preset values.
OSD warning message When the monitor does not support a particular resolution mode, you will see the following message: This means that the monitor cannot synchronize with the signal that it is receiving from the computer. See Monitor specifications for the Horizontal and Vertical frequency ranges addressable by this monitor. The recommended mode is 2560 x 1440. NOTE: The message may slightly differ, depending on the connected input signal.
When you change the default setting of power saving features for the first time, such as USB-C Charging or Other USB Charging, the following message appears: NOTE: If you select Yes for either of the features mentioned above, the message will not appear the next time you change the settings of these features. When you perform a factory reset, the message will appear again.
The OSD functions only in the normal operation mode. If you press any button other than the power button during the Standby mode, the following message will appear depending on the selected input: Activate the computer and the monitor to gain access to the OSD. NOTE: The message may slightly differ, depending on the connected input signal.
When Factory Reset is selected, the following message appears: When Yes is selected, the following message appears: See Troubleshooting for more information.
Setting the maximum resolution NOTE: The steps may vary slightly depending on the version of Windows you have. To set the maximum resolution for the monitor: In Windows® 7, Windows® 8, and Windows® 8.1: 1. For Windows® 8 and Windows® 8.1 only, select the Desktop tile to switch to classic desktop. 2. Right-click on the desktop and click Screen resolution. 3. If you have more than 1 monitor connected, ensure to select S2722DC. 4. Click the dropdown list of the Screen resolution and select 2560 x 1440. 5.
Using the tilt, swivel, and vertical extension NOTE: The following instructions are applicable only for attaching the stand that was shipped with your monitor. If you are attaching a stand that you purchased from any other source, follow the setup instructions that were included with the stand. With the stand attached to the monitor, you can adjust the monitor for the most comfortable viewing angle. Tilt NOTE: The stand is not installed at the factory when shipped.
Vertical extension NOTE: The stand extends vertically up to 110 mm. The figure below illustrates how to extend the stand vertically. Rotating the display Before you rotate the display, ensure it is completely extended vertically and completely tilted up to avoid hitting the bottom edge of the monitor.
Rotate clockwise Rotate counterclockwise NOTE: To use the Display Rotation function (Landscape versus Portrait view) with your Dell computer, you require an updated graphics driver that is not included with this monitor. To download the graphics driver, go to www.dell.com/support and see the Download section for Video Drivers for latest driver updates. NOTE: In the Portrait mode, you may experience performance degradation when using graphic-intensive applications, such as 3D gaming.
Adjusting the rotation display settings of your system After you have rotated your monitor, you need to complete the procedure below to adjust the Rotation Display Settings of your system. NOTE: If you are using the monitor with a non-Dell computer, you need to go the graphics driver website or your computer manufacturer website for information on rotating the 'contents' on your display. To adjust the Rotation Display Settings: 1. Right-click on the desktop and click Properties. 2.
Troubleshooting WARNING: Before you begin any of the procedures in this section, follow the Safety instructions. Self-test Your monitor provides a self-test feature that allows you to check whether your monitor is functioning properly. If your monitor and computer are properly connected but the monitor screen remains dark, run the monitor self-test by performing the following steps: 1. Turn Off both your computer and the monitor. 2. Unplug the video cable from the computer. 3. Turn On the monitor.
Built-in diagnostics Your monitor has a built-in diagnostic tool that helps you determine if the screen abnormality you are experiencing is an inherent problem with your monitor, or with your computer and video card. To run the built-in diagnostics: 1. Ensure that the screen is clean (no dust particles on the surface of the screen). 2. Press and hold Button 4 for about 4 seconds until a pop menu appears. 3. Use Button 1 or Button 2 to select the diagnostic tool and use Button 3 to confirm.
Common problems The following table contains general information about common monitor problems you might encounter and the possible solutions: Common symptoms No Video/Power LED off What you experience No picture Possible solutions • Ensure that the video cable connecting the monitor and the computer is properly connected and secure. • Verify that the power outlet is functioning properly using any other electrical equipment. • Ensure that the power button is pressed fully.
Missing Pixels LCD screen has spots • Turn the monitor off and then on again. • Pixel that is permanently off is a natural defect that can occur in LCD technology. • For more information on Dell Monitor Quality and Pixel Policy, see Dell support site at: www.dell.com/ pixelguidelines. Stuck-on Pixels LCD screen has bright spots • Turn the monitor off and then on again. • Pixel that is permanently off is a natural defect that can occur in LCD technology.
Synchronization Problems Screen is scrambled or appears torn • Reset the monitor to factory settings. • Invoke the self-test feature (see Selftest) and determine if these lines are also flagged in the self-test mode. • Check for bent or broken pins in the video cable connector. • Restart the computer in the safe mode. Safety Related Issues Visible signs of smoke or sparks • Do not perform any troubleshooting steps. • Contact Dell immediately.
Image retention from a static image left on the monitor for a long period of time Faint shadow from the static image displayed appears on the screen • Set the screen to turn off after a few minutes of screen idle time. These can be adjusted in Windows Power Options or Mac Energy Saver setting. • Alternatively, use a dynamically changing screensaver.
No video at HDMI/ When connected USB Type-C port to some dongle/ docking device at the port, there is no video when unplugging/ plugging the cable from the notebook Unplug the HDMI/USB Type-C cable from dongle/docking device, then plug the docking HDMI/USB Type-C cable to the notebook. Universal Serial Bus (USB) specific problems Common symptoms What you experience USB interface is not working USB peripherals are not working Possible solutions • Check that your monitor is turned On.
SuperSpeed USB 5 Gbps (USB 3.2 Gen 1) interface is slow SuperSpeed USB • Check that your computer is 5 Gbps (USB 3.2 SuperSpeed USB 5 Gbps (USB 3.2 Gen 1)-compatible. Gen 1) peripherals working slowly or • Some computers have USB 3.2, USB not working at all 2.0, and USB 1.1 ports. Ensure that the correct USB port is used. • Reconnect the upstream cable to your computer. • Reconnect the USB peripherals (downstream connector). • Reboot the computer. Wireless USB peripherals stop working when a USB 3.
Appendix WARNING: Safety instructions WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards. For information on safety instructions, see Safety, Environmental, and Regulatory Information (SERI). FCC notices (U.S. only) and other regulatory information For FCC notices and other regulatory information, see the regulatory compliance website located at www.dell.
