Dell Technology Rail, Bracket, and Tray Guide June 2021 June 2021 Rev.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2021 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents Chapter 1: Rails............................................................................................................................. 4 Rack rails................................................................................................................................................................................4 Rack rails technical details...............................................................................................................................................
1 Rails The following sections describe Dell EMC Networking rack rails. Topics: • • Rack rails Rack rails technical details Rack rails For a list of switching equipment with appropriate rails, see the Quick reference section. Table 1. Rails Abbreviation Rail description Rack height Part number SKU Additional information 1U-S-RR Standard ReadyRail 1U N243X 770-BBGY, 770-BDRL Standard Dell ReadyRail mounting slides. A5. For a 434-mm (17.08-in) wide switch.
Table 1. Rails (continued) Abbreviation Rail description Rack height Part number SKU Additional information ● 558.8-mm, 711.2-mm, or 787.4-mm (22-in, 28-in, or 31-in) offset ● 558.8 mm to 863.6 mm (22 in to 34 in) rack span 1U-EMC-3-RR EMC Gen 3 bezel rails 1U V45CP N/A EMC rails to use in rear-mount (I/O-side of the switch faces the back of the rack) four-post racks. Use with a 434-mm (17.08-in) wide switch. ● 558.8-mm, 711.2-mm, or 787.4-mm (22-in, 28-in, or 31-in) offset. ● 558.8 mm to 863.
1U-M-RR: 1RU Modified ReadyRail (Nokia-specific rail) (HRTVK) Similar to the Standard ReadyRail but with the stop removed. Supports a 450 mm to 793 mm (17.72 in to 31.2 in)-rack span. 2U-S-RR: 2RU Standard ReadyRail (6CJRH) Use with the Z9264F-ON, S6100-ON, or S5296-ON products. 2U-E-RR: 2RU ReadyRail Extension kit (NKFHM) For reverse-install scenarios. Permits an extra 9” face offset to align with longer servers. NOTE: Must be used with the standard ReadyRail kit, B9.
1U-Z93xx-RR: Z9332F-ON ReadyRails (08P6H) For four-post racks. 1U-S52-S41-12-4P: S5212F-ON or S4112-ON Series rails (TTVK9) For four-post racks. Use with the S5112F-ON or S4112-ON Series dual-trays. 1U-EMC-3.14-RR: EMC Gen3.14 bezel rails (19T1K) ● ● ● ● For rear-mount (I/O-side of the switch faces the back of the rack) four-post rack installation. 22-in, 28-in, or 31-in offset (558.8-mm, 711.2-mm, or 787.4-mm offset). The rack span is 22 in to 34 in (558.8 mm to 863.6 mm wide). Use with a 434-mm (17.
1U-EMC-3-RR: EMC Gen 3 bezel rails (V45CP) ● ● ● ● For rear-mount (I/O-side of the switch faces the back of the rack) four-post rack installation. 22-in, 28-in, or 31-in offset (558.8-mm, 711.2-mm, or 787.4-mm offset). The rack span is 22 in to 34 in (558.8 mm to 863.6 mm). Use with a 434-mm (17.08-in) wide switch. 2U-EMC-Z92xx-RR: Z9264F-ON rails for EMC 2RU Gen3.
1U-DN-RR: Z9432F-ON & S5448F-ON Special ReadyRails (TDYXP) ● Four-post rack. ● Rack span is 21.25 in to 41 in (539.7 mm to 1041.4 mm). 2U-DN-RR: Z9664F-ON ReadyRails (N7WVX) 2U-DN-EMC-RR: Z9664F-ON Special Rails (JGF0H) Rack rails technical details Table 2.
Table 2. Rack types supported (continued) Product Two-post Two-post square support round support Two-post threaded support Four-post Four-post square support round support Four-post threaded support 1U-M-RR Yes: not recommended Yes: not recommended Yes: not recommended Yes Yes Yes 2U-S-RR No No No Yes Yes Yes 2U-E-RR No No No Yes Yes Yes 1U-Z93xx-RR No No No Yes Yes Yes 1U-S52S41-12-4P No No No Yes Yes Yes 1U-EMC-3.
2 Brackets The following sections describe Dell EMC Networking brackets. Brackets are used with rack-, wall-, or ceiling-mount installations. Topics: • • Brackets Brackets technical details Brackets For a list of switching equipment with appropriate brackets, see the Quick reference section. Table 4. Brackets Abbreviation Rail description Rack height Part number SKU 1U-4P-BR Four-post brackets 1U G46RV 770For a 434-mm (17.08-in) wide switch, fourBCGP, post mount. Requires mounting screws.
Table 4. Brackets (continued) Abbreviation Rail description Rack height Part number SKU Additional information wall-mount installations. Does not work with N3208PX-ON. WMN320xPCWM-BR N3208PX-ON Wall-mount brackets N/A TK3JM 750-ACPV N3208PX-ON wall-mount bracket. WMN3208PXDIN-WM-BR N3208PX-ON DIN railmount bracket N/A YP5PR 770Use with TK3JM for special rail mount.
1U-2P-BR: Two-post brackets (5PX47) For a 434-mm (17.08-in) wide switch, 5-in offset, two-post mount. 1U-XSeries-BR: X-Series Rack-Mount Kit (7YYKH) WM-XSer-NSer-BR: X- and N-Series wall-mount brackets (9JM64) Wall-mount brackets for the N1108T-ON, N1108P-ON, X1018, X1026, X1052, or X4012 products. 1U-NSer-BR: N-Series rack-mount brackets (HCDHT) Rack-mount brackets for the N1124T/P-ON, N1148T/P-ON, N2024/P, N2048/P, N1524/P, or N1548/P products.
1U-NSer-SSer-BR: N- and S-Series rack-mount brackets (7YYKH) Rack-mount brackets for the N1108P/T, N1108EP, S4112F-ON or S5212F-ON products 1U-Z93xx-BR: Z9332F-ON four-post brackets (RVH5J) 1U-N22-N32-BR: N2200-ON / N3200-ON Series MPS-3S flushmount or offset-mount brackets (2V6KK) Two-post rack. Flush-mount or 5-in offset (127-mm offset) middle-mount installations.
1U-N22-N32-FM-BR: N2200-ON / N3200-ON Series MPS-1S flushmount, offset-mount, or rear-mount brackets (PR8P0) Two-post rack. Flush-mount, rear-mount, or 5-in offset (127-mm offset) offset-mount installations.
WM-N320xPC-WM-BR: N3208PX-ON wall-mount bracket (TK3JM) WM-N3208PX-DIN-WM-BR: N3208PX-ON DIN rail-mount bracket (YP5PR) 1U-N3208PX-2P-BR: N3208PX-ON rack-mount brackets (C94XW) N3208PX-ON two-post flush-mount and offset-mount brackets.
BR-N3208PX-E-BAT-BR: N3208PX-ON external power adapter battery holder (N8JNG) 1U-N3208P-E-2BAT-BR: N3208PX-ON external power adapter twobattery holder brackets (39VWT) Two EPA holder, two-post flush-mount and offset-mount brackets.
2U-N3208P-E-2BAT-2P-BR: N3208PX-ON external power adapter two-battery for two-post mount (YTM40) 1U-N3208P-E-BAT-4P-BR: N3208PX-ON external power adapter one-battery for four-post mount (1MJP0) 1U-DN-4P-BR: Z9432F-ON & S5448F-ON brackets (7PGWK) ● Four-post rack. ● Rack span is 22 in to 36 in (558.8 mm to 914.
BR-VEP-WM-BR: VEP14xx, Edge 61xx, or 510 wall-mount brackets (G90MW) Brackets technical details Table 5.
Table 5. Rack types supported (continued) Product Two-post Two-post square support round support Two-post threaded support Four-post Four-post square support round support Four-post threaded support 2U-N3208PE-2BAT-2P-BR Yes Yes Yes No N0 No 1U-N3208P-EBAT-4P-BR No No No Yes Yes Yes 1U-DN-4P-BR No No No Yes Yes Yes BR-VEP-WMBR N/A N/A N/A N/A N/A N/A Table 6.
Table 6.
3 Trays The following sections describe Dell EMC Networking rack trays. Topics: • • Trays Trays technical details Trays For a list of switching equipment with appropriate trays, see the Quick reference section. Table 7. Trays Abbreviation Rail description Rack height Part SKU number Additional information 1U-S41HRACK-TR S4112-ON fast access; half-rack, side-by-side 1U 0P7H1 770BCQZ Dual-tray mount for two S4112F-ON units for a four-post mount.
1U-XSer-NSer-SbS-4P-TR: X-Series or N-Series Tandem Switch Tray (XRN98) For four-post racks. Half-rack, side-by-side mounting tray. ● Default tray provisioned with four-post brackets. Tray content change requires removal of the entire tray. ● Holds 2x of N1108T-ON, N1108P-ON, X1018, X1026, X1026P, X4012 in 1RU, four-post rack only. 1U-S52-SbS-4P-TR: S5212F-ON Series dual-tray (2VMV9) One RU. For four-post racks. Half-rack, side-by-side mounting tray.
Trays technical details Table 8.
4 Quick reference The following table is a quick reference guide of abbreviations, products, and rails, brackets, or trays by Dell Technology part number. Table 10.
Table 10.
Table 11.
5 Dell EMC support The Dell EMC support site provides documents and tools to help you use Dell EMC equipment and mitigate network outages. Through the support site you can obtain technical information, access software upgrades and patches, download available management software, and manage your open cases. The Dell EMC support site provides integrated, secure access to these services. To access the Dell EMC support site, go to www.dell.com/support/.