Dell EMC OpenManage Enterprise-Modular Edition Version 1.20.10 for PowerEdge MX7000 Chassis Release Notes August 2020 Rev.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2018 -2020 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents Chapter 1: Release summary..........................................................................................................4 Chapter 2: Compatibility............................................................................................................... 5 Supported systems............................................................................................................................................................. 5 Supported web browsers................................
1 Release summary The Dell EMC OpenManage Enterprise - Modular is a system management hardware and software solution for managing the Dell EMC PowerEdge MX7000 chassis. Version 1.20.10 Release date August 2020 Priority and recommendations RECOMMENDATION: Dell recommends applying this update during your next scheduled update cycle.
2 Compatibility Topics: • • Supported systems Supported web browsers Supported systems Chassis ● Dell PowerEdge MX7000 Sleds ● Dell PowerEdge MX740c ● Dell PowerEdge MX840c ● Dell PowerEdge MX5016s I/O Modules ● ● ● ● ● ● ● PowerEdge MX 25Gb Ethernet Pass-Through Module PowerEdge MX 10GBASE-T Ethernet Pass-Through Module PowerEdge MX5000s SAS Switch Dell EMC MX9116n Fabric Switching Engine Dell EMC MX7116n Fabric Expander Module Dell EMC MX5108n Ethernet Switch Dell EMC MXG610s Fibre Channel Switch Su
3 New and enhanced features This release of OME-Modular supports: ● ● ● ● 6 Quad-Port Ethernet adapters in up to five MX7000 chassis in a scalable fabric. Up to 512 VLANs per fabric, 256 VLANs per server port, and up to 512 VLANs per uplink. The category, "Unknown" in compliance reports for components that are not supported in catalogs. Additional topologies for Fabric Expander Module connectivity.
4 Fixes Topics: • • Reclaim identities task Duplicate or missing devices Reclaim identities task Fixed an issue that was causing the reclaim identities or detach profile task to fail, when the associated identity pool did not have enough identities to reserve. Tracking number 168225 Duplicate or missing devices Fixed an issue that was causing duplicate or missing devices in the list of devices that was fetched using the API, /api/ DeviceService/Devices.
5 Important Notes Topics: • • • Security Ethernet Switch firmware update Upgrading or downgrading OME-Modular Security OpenVAS vulnerability scanner may report the following issues: ● NVT: OpenSSH 'sftp-server' Security Bypass Vulnerability (Linux) (OID: 1.3.6.1.4.1.25623.1.0.812051). This is a false positive based on the OpenSSH version that OME–Modular carries. No SFTP is exposed or supported. ● NVT: SSH Weak Encryption Algorithms Supported (OID: 1.3.6.1.4.1.25623.1.0.105611).
6 Known issues Topics: • • • • • • Deployment and Configuration Job created multiple times for some sleds during Quick Deploy and Attach operation for sleds Error while assigning identities Advanced Filter option not working in Audit Logs Disabled NPAR NIC partitions enabled and listed in iDRAC and operating system after template deployment Job created for all targets instead of filtered or selected targets Storage devices reported as unknown even though catalog contains storage firmware Deployment and Co
Disabled NPAR NIC partitions enabled and listed in iDRAC and operating system after template deployment Description A reference template, containing configuration changes for BIOS, NIC, and iDRAC was deployed on compute sleds in the chassis. The NIC configuration is N-PAR enabled. The first NIC partition is enabled, the second partition is enabled with FCoE, while the third and fourth partitions are disabled for A and B Fabric.
7 Limitations 1. OME–Modular is supported only on TLS 1.2 and later. Versions earlier than 1.2 may or may not work. Also, support for earlier versions of TLS is not provided. 2. A blinking cursor is not displayed in the text fields when going to the console for the first time. This is owing to an issue in Chrome. For details and status, see bugs.chromium.org/p/chromium/issues/detail?id=740652. 3.
8 Installation See the Dell EMC OpenManage Enterprise - Modular Edition Version 1.20.10 for PowerEdge MX Chassis User's Guide for the following information: ● ● ● ● Prerequisites Hardware and software requirements Installation and configuration Updating MX7000 components using OME-Modular 1.20.
9 Resources and support For more information about the features of this release, see the documentation for OpenManage Enterprise Modular (OMEModular) available at https://www.dell.com/openmanagemanuals. Latest Release Notes To access the latest Release Notes for this version: 1. 2. 3. 4. Go to https://www.dell.com/openmanagemanuals. Click Dell OpenManage Enterprise. Click the link for this version of OME-Modular. Click DOCUMENTATION.
10 Contacting Dell EMC NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell EMC product catalog. Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. To contact Dell EMC for sales, technical support, or customer service issues, see https://www.dell.com/contactdell.